Leanne D. Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Leanne D. Chen has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
Shayne J. Johnston
Electrochemical Technology Centre, Department of Chemistry
7 shared publicationsAustin Pounder
Guelph-Waterloo Centre for Graduate Work in Chemistry and Biochemistry, Department of Chemistry
6 shared publications- William Tam
Guelph-Waterloo Centre for Graduate Work in Chemistry and Biochemistry, Department of Chemistry, University of Guelph
6 shared publications - Anna Klinkova
Department of Chemistry and Waterloo Institute for Nanotechnology University of Waterloo, Waterloo, Ontario N2L 3G1, Canada
5 shared publications - Brendan D. Paget
University of Guelph
5 shared publications - Karen Chan
Technical University of Denmark
5 shared publications
Latest Publications
- Open Access
- 4 August 2026
- Published by IOP Publishing in Nanotechnology
- Vol. 37 (31) , 315403
Facet dependence for CeO 2 as a potential Ammonia oxidation electrocatalyst studied by DFT
The transition toward a carbon-free energy system requires energy carriers that are both sustainable and practical to scale. Ammonia is a promising candidate due to its high energy density, established infrastructure, and compatibility with renewable electricity. A key challenge in direct ammonia fuel cells development is the lack of inexpensive, active, and poison-resistant anode catalysts capable of efficiently carrying out the ammonia oxidation reaction (AOR). Ceria ( CeO 2 ) related materials have shown potential for AOR and adjacent reactions, however, a comprehensive mechanistic understanding of AOR on pristine ceria surfaces has not previously been established. This density functional theory study examines CeO 2 (111), CeO 2 (110), and CeO 2 (100) for AOR. CeO 2 (100) was found to be the most active surface with the least positive limiting potential of 1.16 V and a potential determining step (PDS) of ∗ NH 3 → ∗ NH 2 for the Gerischer-Mauerer mechanism, whereas the Oswin-Salomon mechanism has a more positive limiting potential of 1.33 V due to the PDS being ∗ NH 2 → ∗ NH . In comparison, CeO 2 (111) and CeO 2 (110) possessed limiting potentials of 1.38 V and 1.33 V respectively, both with a PDS of ∗ NH 2 → ∗ NH for the Gerischer-Mauerer and Oswin-Salomon mechanisms. Among oxide materials, the activity of CeO 2 (100) is improved over NiO due to possessing a lower limiting potential for AOR. Introducing vacancies into CeO 2 may further improve its activity toward AOR.
- 4 August 2026
- Published by IOP Publishing in Nanotechnology
- Vol. 37 (31) , 315403
Open AccessFacet dependence for CeO 2 as a potential Ammonia oxidation electrocatalyst studied by DFT
The transition toward a carbon-free energy system requires energy carriers that are both sustainable and practical to scale. Ammonia is a promising candidate due to its high energy density, established infrastructure, and compatibility with renewable electricity. A key challenge in direct ammonia fuel cells development is the lack of inexpensive, active, and poison-resistant anode catalysts capable of efficiently carrying out the ammonia oxidation reaction (AOR). Ceria ( CeO 2 ) related materials have shown potential for AOR and adjacent reactions, however, a comprehensive mechanistic understanding of AOR on pristine ceria surfaces has not previously been established. This density functional theory study examines CeO 2 (111), CeO 2 (110), and CeO 2 (100) for AOR. CeO 2 (100) was found to be the most active surface with the least positive limiting potential of 1.16 V and a potential determining step (PDS) of ∗ NH 3 → ∗ NH 2 for the Gerischer-Mauerer mechanism, whereas the Oswin-Salomon mechanism has a more positive limiting potential of 1.33 V due to the PDS being ∗ NH 2 → ∗ NH . In comparison, CeO 2 (111) and CeO 2 (110) possessed limiting potentials of 1.38 V and 1.33 V respectively, both with a PDS of ∗ NH 2 → ∗ NH for the Gerischer-Mauerer and Oswin-Salomon mechanisms. Among oxide materials, the activity of CeO 2 (100) is improved over NiO due to possessing a lower limiting potential for AOR. Introducing vacancies into CeO 2 may further improve its activity toward AOR.
- Open Access
- 2 June 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Facet Dependence for CeO2 as a Potential Ammonia Oxidation Electrocatalyst Studied by DFT
The transition toward a carbon-free energy system requires energy carriers that are both sustainable and practical to scale. Ammonia is a promising candidate due to its high energy density, established infrastructure, and compatibility with renewable electricity. A key challenge in direct ammonia fuel cells (DAFCs) development is the lack of inexpensive, active, and poison-resistant anode catalysts capable of efficiently carrying out the ammonia oxidation reaction (AOR). Ceria (CeO 2 ) related materials have shown potential for AOR and adjacent reactions, however, a comprehensive mechanistic understanding of AOR on pristine ceria surfaces has not previously been established. This density functional theory (DFT) study examines CeO 2 (111), CeO 2 (110), and CeO 2 (100) for AOR. CeO 2 (100) was found to be the most active surface with the least positive limiting potential of 1.16 V and a potential determining step (PDS) of *NH 3 → *NH 2 . CeO 2 (111) and CeO 2 (110) possessed limiting potentials of 1.38 V and 1.33 V, respectively, with the same PDS as CeO 2 (100). Among oxide materials, the activity of CeO 2 (100) is improved over NiO. Introducing vacancies into CeO 2 may further improve its activity toward AOR.
- 2 June 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessFacet Dependence for CeO2 as a Potential Ammonia Oxidation Electrocatalyst Studied by DFT
The transition toward a carbon-free energy system requires energy carriers that are both sustainable and practical to scale. Ammonia is a promising candidate due to its high energy density, established infrastructure, and compatibility with renewable electricity. A key challenge in direct ammonia fuel cells (DAFCs) development is the lack of inexpensive, active, and poison-resistant anode catalysts capable of efficiently carrying out the ammonia oxidation reaction (AOR). Ceria (CeO 2 ) related materials have shown potential for AOR and adjacent reactions, however, a comprehensive mechanistic understanding of AOR on pristine ceria surfaces has not previously been established. This density functional theory (DFT) study examines CeO 2 (111), CeO 2 (110), and CeO 2 (100) for AOR. CeO 2 (100) was found to be the most active surface with the least positive limiting potential of 1.16 V and a potential determining step (PDS) of *NH 3 → *NH 2 . CeO 2 (111) and CeO 2 (110) possessed limiting potentials of 1.38 V and 1.33 V, respectively, with the same PDS as CeO 2 (100). Among oxide materials, the activity of CeO 2 (100) is improved over NiO. Introducing vacancies into CeO 2 may further improve its activity toward AOR.
- Open Access
- 22 May 2026
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 16 (13) , 4418-4425
Theoretical insights into designing β-M@Ni(OH) 2 electrocatalysts for efficient urea oxidation
Ni-based catalysts show great potential for the urea oxidation reaction (UOR) due to their high activity, low cost, and broad energy and environmental applications. Herein, we investigate two possible mechanisms for N2 formation on β-Ni(OH)2 using density functional theory (DFT) and further focus on the dehydrogenation steps of the intramolecular pathway over β-Ni(OH)2 and β-M@Ni(OH)2 catalysts (M = Cr, Fe, Co, Cu, Mo, Ru, Rh, Pd, Ir, Pt, and Au). The results show that the intramolecular pathway is energetically favourable on β-Ni(OH)2, and that the enhanced urea adsorption energy, Eads (urea), over β-M@Ni(OH)2 originates from the upshift of the d-band centre, εd, which is induced by M-doping. Gibbs free energy analyses identify β-Fe@Ni(OH)2, β-Co@Ni(OH)2, and β-Pd@Ni(OH)2 as promising catalysts with low limiting potentials. Furthermore, the urea adsorption strength shows a linear correlation with the calculated limiting potentials, suggesting that it can serve as an effective descriptor for urea oxidation toward N2 formation. This study provides theoretical guidance for the screening and design of highly active Ni-based UOR catalysts.
- 22 May 2026
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 16 (13) , 4418-4425
Open AccessTheoretical insights into designing β-M@Ni(OH) 2 electrocatalysts for efficient urea oxidation
Ni-based catalysts show great potential for the urea oxidation reaction (UOR) due to their high activity, low cost, and broad energy and environmental applications. Herein, we investigate two possible mechanisms for N2 formation on β-Ni(OH)2 using density functional theory (DFT) and further focus on the dehydrogenation steps of the intramolecular pathway over β-Ni(OH)2 and β-M@Ni(OH)2 catalysts (M = Cr, Fe, Co, Cu, Mo, Ru, Rh, Pd, Ir, Pt, and Au). The results show that the intramolecular pathway is energetically favourable on β-Ni(OH)2, and that the enhanced urea adsorption energy, Eads (urea), over β-M@Ni(OH)2 originates from the upshift of the d-band centre, εd, which is induced by M-doping. Gibbs free energy analyses identify β-Fe@Ni(OH)2, β-Co@Ni(OH)2, and β-Pd@Ni(OH)2 as promising catalysts with low limiting potentials. Furthermore, the urea adsorption strength shows a linear correlation with the calculated limiting potentials, suggesting that it can serve as an effective descriptor for urea oxidation toward N2 formation. This study provides theoretical guidance for the screening and design of highly active Ni-based UOR catalysts.
- Open Access
- 10 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Theoretical Insights into Designing β-M@Ni(OH)2 Electrocatalysts for Efficient Urea Oxidation
Ni-based catalysts show great potential for the urea oxidation reaction (UOR) due to their high activity, low cost, and broad energy and environmental applications. Herein, we investigate two possible mechanisms for N2 formation on β-Ni(OH)2 using density functional theory (DFT) and further focus on the dehydrogenation steps of the intramolecular pathway over β-Ni(OH)2 and β-M@Ni(OH)2 catalysts (M = Cr, Fe, Co, Cu, Mo, Ru, Rh, Pd, Ir, Pt, and Au). The results show that the intramolecular pathway is energetically favorable on β-Ni(OH)2, and that the enhanced urea adsorption energy (Eads(urea)) over β-M@Ni(OH)2 originates from the upshift of the d-band center (εd) which is induced by M-doping. Gibbs free energy analyses identify β-Fe@Ni(OH)2, β-Co@Ni(OH)2, and β-Pd@Ni(OH)2 as promising catalysts with low limiting potentials. Furthermore, the urea adsorption strength shows a linear correlation with the calculated limiting potentials, suggesting that it can serve as an effective descriptor for urea oxidation toward N2 formation. This study provides theoretical guidance for the screening and design of highly active Ni-based UOR catalysts.
- 10 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessTheoretical Insights into Designing β-M@Ni(OH)2 Electrocatalysts for Efficient Urea Oxidation
Ni-based catalysts show great potential for the urea oxidation reaction (UOR) due to their high activity, low cost, and broad energy and environmental applications. Herein, we investigate two possible mechanisms for N2 formation on β-Ni(OH)2 using density functional theory (DFT) and further focus on the dehydrogenation steps of the intramolecular pathway over β-Ni(OH)2 and β-M@Ni(OH)2 catalysts (M = Cr, Fe, Co, Cu, Mo, Ru, Rh, Pd, Ir, Pt, and Au). The results show that the intramolecular pathway is energetically favorable on β-Ni(OH)2, and that the enhanced urea adsorption energy (Eads(urea)) over β-M@Ni(OH)2 originates from the upshift of the d-band center (εd) which is induced by M-doping. Gibbs free energy analyses identify β-Fe@Ni(OH)2, β-Co@Ni(OH)2, and β-Pd@Ni(OH)2 as promising catalysts with low limiting potentials. Furthermore, the urea adsorption strength shows a linear correlation with the calculated limiting potentials, suggesting that it can serve as an effective descriptor for urea oxidation toward N2 formation. This study provides theoretical guidance for the screening and design of highly active Ni-based UOR catalysts.
- 22 December 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (1) , 257-268
Concentration Effects of Co and Cu Dopants in β-Ni(OH) 2 on Ammonia Oxidation Activity and Selectivity
- 22 December 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (1) , 257-268
Concentration Effects of Co and Cu Dopants in β-Ni(OH) 2 on Ammonia Oxidation Activity and Selectivity
- Open Access
- 27 September 2025
- Published by Wiley in ChemElectroChem
- Vol. 12 (20)
Computational Design of Pt-M (M = Au, Ir, Pd, Rh, and Ru) Binary Alloys for Enhanced Ammonia Oxidation Electrocatalysis
The electrochemical ammonia oxidation reaction (AOR) shows considerable potential for its applications in waste removal and the production of clean energy. While Pt remains the most investigated catalyst for this reaction, its limitations have prompted research into Pt‐based bimetallic alloys. This study investigates both uniform and mixed PtM (M = Au, Ir, Pd, Rh, and Ru) alloys as catalysts for the AOR using density functional theory (DFT). A systematic selection method is used to choose suitable surfaces for testing. The findings indicate that the Oswin–Salomon mechanism is preferred across all surfaces for N2 (g) formation. Additionally, the results demonstrate that mixed alloys exhibit superior catalytic activity compared to uniform alloys for the AOR. It is found that the atoms in the topmost layer of the alloy are the most significant factor in influencing catalytic activity. Furthermore, the linear relationship between the ‐band center and adsorption energy of key intermediate *NH2 is confirmed in this work, highlighting the effect of the secondary metal on the electronic structure of the catalyst. The findings provide theoretical insights for the design of high‐performance Pt alloys for AOR and serve as a general guideline for modulating the reactivity of binary alloys for electrocatalysis.
- 27 September 2025
- Published by Wiley in ChemElectroChem
- Vol. 12 (20)
Open AccessComputational Design of Pt-M (M = Au, Ir, Pd, Rh, and Ru) Binary Alloys for Enhanced Ammonia Oxidation Electrocatalysis
The electrochemical ammonia oxidation reaction (AOR) shows considerable potential for its applications in waste removal and the production of clean energy. While Pt remains the most investigated catalyst for this reaction, its limitations have prompted research into Pt‐based bimetallic alloys. This study investigates both uniform and mixed PtM (M = Au, Ir, Pd, Rh, and Ru) alloys as catalysts for the AOR using density functional theory (DFT). A systematic selection method is used to choose suitable surfaces for testing. The findings indicate that the Oswin–Salomon mechanism is preferred across all surfaces for N2 (g) formation. Additionally, the results demonstrate that mixed alloys exhibit superior catalytic activity compared to uniform alloys for the AOR. It is found that the atoms in the topmost layer of the alloy are the most significant factor in influencing catalytic activity. Furthermore, the linear relationship between the ‐band center and adsorption energy of key intermediate *NH2 is confirmed in this work, highlighting the effect of the secondary metal on the electronic structure of the catalyst. The findings provide theoretical insights for the design of high‐performance Pt alloys for AOR and serve as a general guideline for modulating the reactivity of binary alloys for electrocatalysis.
- Open Access
- 10 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Concentration Effects of Co and Cu Dopants in β-Ni(OH)2 on Ammonia Oxidation Activity and Selectivity
The electrochemical ammonia oxidation reaction offers a potential approach for energy generation or the remediation of aqueous nitrogenous waste. The development of affordable and stable electrocatalysts is needed for the widespread use of the AOR. Ni-based electrodes offer a cheaper alternative to other electrocatalysts while having moderate activity and long-term stability. This work uses density functional theory to investigate the effect of Co and Cu surface dopants at varying concentrations in β-Ni(OH)2 and their impact on ammonia oxidation activity and selectivity. The introduction of Co-doping to β-Ni(OH)2 reduced the *NH2 to *NH free energy, leading to lowered limiting potentials for N2 (g) formation. Cu-doping led to the reduction in energy required for the hydroxylation of *NO to *NO2H. This hydroxylation step is the typical limiting potential step for the production of NO2–(aq) and suggests Cu-doping may impact selectivity towards NO2–(aq) production. This work begins to understand the effect of surface doping β-Ni(OH)2 in differing ratios, in an attempt to improve the performance of Ni-based catalysts.
- 10 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessConcentration Effects of Co and Cu Dopants in β-Ni(OH)2 on Ammonia Oxidation Activity and Selectivity
The electrochemical ammonia oxidation reaction offers a potential approach for energy generation or the remediation of aqueous nitrogenous waste. The development of affordable and stable electrocatalysts is needed for the widespread use of the AOR. Ni-based electrodes offer a cheaper alternative to other electrocatalysts while having moderate activity and long-term stability. This work uses density functional theory to investigate the effect of Co and Cu surface dopants at varying concentrations in β-Ni(OH)2 and their impact on ammonia oxidation activity and selectivity. The introduction of Co-doping to β-Ni(OH)2 reduced the *NH2 to *NH free energy, leading to lowered limiting potentials for N2 (g) formation. Cu-doping led to the reduction in energy required for the hydroxylation of *NO to *NO2H. This hydroxylation step is the typical limiting potential step for the production of NO2–(aq) and suggests Cu-doping may impact selectivity towards NO2–(aq) production. This work begins to understand the effect of surface doping β-Ni(OH)2 in differing ratios, in an attempt to improve the performance of Ni-based catalysts.
- 26 August 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (35) , 15702-15712
Photoelectrochemical Degradation of 4-Nitrothiophenol and In Situ Surface-Enhanced Raman Spectroscopy Monitoring Based on Au Nanoparticles Grown on Templated TiO2
- 26 August 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (35) , 15702-15712
Photoelectrochemical Degradation of 4-Nitrothiophenol and In Situ Surface-Enhanced Raman Spectroscopy Monitoring Based on Au Nanoparticles Grown on Templated TiO2
- Open Access
- 23 July 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 7 (20) , 6438-6450
A density functional theory investigation of ammonia oxidation pathways on nickel oxide
Direct ammonia fuel cells (DAFCs) utilize ammonia’s chemical energy and converts it into electricity through the electrocatalyzed ammonia oxidation reaction (AOR). Currently, studies have focused on Pt-based anode materials, however due to limitations, research has shifted towards alternative materials. Previous research in our group has focused on oxidized Ni-based materials including Ni(OH)2 and NiOOH which show promising catalytic activity. The current study used density functional theory to determine the catalytic activity of NiO. It was found that the rate-limiting step for all mechanisms associated with AOR is seen as the first deprotonation from *NH3 to *NH2, requiring 1.25 V. Additionally, the lattice oxygens in the surface provide alternate mechanistic routes compared to the previously studied Ni(OH)2 and NiOOH. This work outlines the ability of NiO to drive various mechanisms toward N2(g), N2H4(g), NO(g), NO2 –(aq), NO3 –(aq), and N2O(g).
- 23 July 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 7 (20) , 6438-6450
Open AccessA density functional theory investigation of ammonia oxidation pathways on nickel oxide
Direct ammonia fuel cells (DAFCs) utilize ammonia’s chemical energy and converts it into electricity through the electrocatalyzed ammonia oxidation reaction (AOR). Currently, studies have focused on Pt-based anode materials, however due to limitations, research has shifted towards alternative materials. Previous research in our group has focused on oxidized Ni-based materials including Ni(OH)2 and NiOOH which show promising catalytic activity. The current study used density functional theory to determine the catalytic activity of NiO. It was found that the rate-limiting step for all mechanisms associated with AOR is seen as the first deprotonation from *NH3 to *NH2, requiring 1.25 V. Additionally, the lattice oxygens in the surface provide alternate mechanistic routes compared to the previously studied Ni(OH)2 and NiOOH. This work outlines the ability of NiO to drive various mechanisms toward N2(g), N2H4(g), NO(g), NO2 –(aq), NO3 –(aq), and N2O(g).
- Open Access
- 21 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
A Density Functional Theory Investigation of Ammonia Oxidation Pathways on Nickel Oxide
Direct ammonia fuel cells (DAFCs) utilize ammonia’s chemical energy and converts it into electricity through the electrocatalyzed ammonia oxidation reaction (AOR). Currently, studies have focused on Pt-based anode materials, however due to limitations, research has shifted towards alternative materials. Previous research in our group has focused on oxidized Ni-based materials including Ni(OH)2 and NiOOH which show promising catalytic activity. The current study, used density functional theory to determine the catalytic activity of NiO. It was found that the rate limiting step for all mechanisms associated with AOR is seen as the first deprotonation from *NH3 to *NH2, requiring 1.25 V. Additionally, the lattice oxygens in the surface provide alternate mechanistic routes compared to the previously studied Ni(OH)2 and NiOOH. This work outlines the ability of various mechanisms toward N2(g), N2H4(g), NO(g), NO2−(aq), NO3−(aq), and N2O(g).
- 21 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessA Density Functional Theory Investigation of Ammonia Oxidation Pathways on Nickel Oxide
Direct ammonia fuel cells (DAFCs) utilize ammonia’s chemical energy and converts it into electricity through the electrocatalyzed ammonia oxidation reaction (AOR). Currently, studies have focused on Pt-based anode materials, however due to limitations, research has shifted towards alternative materials. Previous research in our group has focused on oxidized Ni-based materials including Ni(OH)2 and NiOOH which show promising catalytic activity. The current study, used density functional theory to determine the catalytic activity of NiO. It was found that the rate limiting step for all mechanisms associated with AOR is seen as the first deprotonation from *NH3 to *NH2, requiring 1.25 V. Additionally, the lattice oxygens in the surface provide alternate mechanistic routes compared to the previously studied Ni(OH)2 and NiOOH. This work outlines the ability of various mechanisms toward N2(g), N2H4(g), NO(g), NO2−(aq), NO3−(aq), and N2O(g).