Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tanya Bozhkova has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Improvement of Occlusal Function After Clear Aligner Orthodontics Verified by T-Scan Novus Digital Analysis

    by Tanya Bozhkova, Nina Musurlieva, Velina Stoeva

    Background and Clinical Significance: Clear aligner therapy has become a widely used orthodontic treatment, particularly among adults seeking esthetic and comfortable alternatives to fixed appliances. Achieving a stable and functional occlusion remains one of the primary objectives in orthodontics. The T-Scan digital occlusal analysis system offers an innovative and objective method for quantifying occlusal contact distribution and timing, thereby improving diagnostic accuracy and follow-up. This report aims to present a clinical case demonstrating the use of the T-Scan Novus system for evaluating occlusal balance before and after clear aligner therapy, highlighting its role in documenting short-term functional occlusal changes. Case presentation: A 42-year-old female patient with Class II malocclusion, deep bite, and anterior crowding was treated with Smilers® clear aligners over nine months (18 aligners). Digital occlusal analysis was performed before treatment and one month after treatment. Pre-treatment analysis demonstrated a pronounced asymmetry in occlusal force distribution, with left-side dominance (67.9%) compared with the right side (32.1%). One month after treatment, occlusal forces were more evenly distributed (52.4% left, 47.6% right). Occlusion time decreased to 0.25 s and disocclusion time to 0.08 s, falling within commonly reported physiological ranges. Conclusions: Within the limitations of a single-case design and short-term follow-up, digital occlusal analysis using the T-Scan Novus system enabled objective documentation of occlusal force distribution and timing changes after clear aligner therapy. These findings are descriptive and hypothesis-generating and should be interpreted cautiously.

  • THE CHALLENGES OF MANDIBULAR ADVANCEMENT DEVICES - A NEW DESIGN ADJUSTABLE DENTAL APPLIANCE FOR THE TREATMENT OF OBSTRUCTIVE SLEEP APNEA

    by Lyubomir Grozev, Tanya Bozhkova, Nina Musurlieva, Kiril Terziyski, Aneliya Draganova

    Introduction: Obstructive Sleep Apnea is one of the prevalent breathing sleep disorders, especially among the elderly population of the modern world. Obstructive sleep apnea is defined as the occurrence of five or more episodes of complete or partial upper airway obstructions per hour during sleep. Over the years, we have seen many different appliances that target treating patients with apnea syndrome.The result is that they all seem to deal with the problem at hand on a scale from mild to moderate OSA. Aim: The goal we set was to create a new design ofan adjustable dental appliance which will help patients with obstructive sleep apnea. Materials and Methods: Impressions of the mandible and maxilla were obtained to create the specific dental appliance. The special design of the appliance includes an adjustable metal bar that is placed frontally to the anterior upper teeth and can be adjusted to the different levels of mandibular advancement.Adam's clasps have been affixed to the first lower molars, and two occlusal splints to the occlusal surfaces of all lower teeth in order to secure the device in place. To prevent mouth opening during sleep, two barriers have been built into the vestibular surfaces of the upper premolars and molars. Conclusion: With the help of this innovative appliance design, dental professionals may now properly position and make necessary corrections in patients who suffer from obstructive sleep apnea and snoring.

  • COMPREHENSIVE ASSESSMENT OF TREATMENT SATISFACTION WITH COMPLETE DENTURES ARTICULATED WITH THE T-SCAN SYSTEM AND ARTICULATION PAPER

    by Tanya Bozhkova, Nina Musurlieva

    Background: Prosthetic treatment in case of complete edentulism has the task of restoring the lost chewing function, speech and breathing and preventing the appearance or deepening of the reduction changes of both the soft tissues and the bones in the maxillofacial region, as well as restoring the aesthetic appearance and improving the psyche of the patient The aim of the present pilot study is to evaluate the satisfaction with treatment with complete dentures articulated with articulation paper and the T-SCAN system, which will serve as the basis for a large-scale cross-sectional study. Material and methods: The study includes a sample of 20 completely edentulous patients. The sample consisted of 10 women and 10 men. The studied patients were randomly divided into two groups of 10 people each. The patients were interviewed post treatment [at 5 weeks], a validated questionnaire about oral health-related quality of life in edentulous people [OHIP-EDENT] was applied. Results: The digital occlusal analysis provides more accurate information on the articulation of the prostheses, as it indicates the teeth with increased force in percentages and also the sequence of occurrence of the occlusal contacts. Analysis of occlusal contacts is subjective, and articulating them with this method carries error risks.When using the T-Scan system, patients are more satisfied than the treatment with total patients, as they feel the prostheses are much more comfortable and in much fewer visits. Conclusion: This quantitative methodology can be used as the method of choice for control of occluso-articulation relationships in treatment with total dentures in any dental practice, if technically possible

  • Open Access

    Methodology for Occlusal-Articulation Relationships through the T-SCAN System in Treatment with Complete Denture

    by Tanya Bozhkova, Nina Musurlieva

    Background: The exact physiological restoration of the occlusal-articulation balance is a challenge for every dentist. Any tooth restoration, extraction, or prosthetic treatment creates a prerequisite for a change in occlusion Objectives: To approve a methodology that uses the capabilities of the T-SCAN system to evaluate the occlusal-articulation relationships in the treatment of patients with complete dentures. Material and methods: The study included 47 patients for prosthetic treatment. The subjects were aged 56 to 81 years (18 men and 24 women). On each one, control of the occlusal-articulation relationship was performed after the treatment with a complete denture. Examination of the occlusal contacts was performed with two-step articulation paper and the T-SCAN system. The minimum sample size of patients was determined based on power analysis for sample-size calculation. Descriptive statistics was used. Statistical significance was assumed at P< 0.05. SPSS version 20.0 was applied for data processing. Results: More women 51.06 ± 7.29 % and 38.29 ± 7.09 % men were included in the study. The study participants were divided into 4 age groups: under 60 years, 61-70 years, 71-80 years, and over 81 years. It shows that the largest number are patients in the age group 61-70 years (46.81 ± 7.28 %), followed by patients up to 60 years (31.91 ± 6.80 %) and patients 71-80 years (12.77 ± 4.87 %), and the smallest number were patients over 81 years old (8.51 ± 4.07 %). The achieved results give us reason to consider that the articulation of the complete dentures with our proposed methodology ensures the achievement of optimal, harmonious occlusal relationships. Conclusion: A methodology has been developed to control the occlusion-articulation relationships through the T-SCAN system in treatment with complete denture, which can be used as the method of choice in the presence of technical possibility since optimal, harmonious occlusal relationships can be achieved with it.


  • Open Access

    The Current Aspects of Oral Health Promotion: A Narrative Overview

    by Nina Musurlieva, Tanya Bozhkova

    BACKGROUND: Various models have been described in the literature on how health can be promoted. Most relate to health in general, but the basic principles apply to the same degree to oral health. Oral diseases are largely preventable; but today, there is a limited implementation of the ideas of health promotion in dentistry, due to a philosophy of dentistry focused on a curative and individualized approach to oral diseases. AIM: The present study aims to outline the current aspects of oral health promotion in dental practice. MATERIALS AND METHODS: A comprehensive literature search was conducted, mainly using PubMed and Embase from 1986 through October 2021, results reviewed, prioritized, and findings compiled. The following search terms were used: “Oral health;” “oral health or oral condition;” “oral health related quality of life;” “health promotion;” and “dental practice.” Thirty-one studies were evaluated for the review. RESULTS AND DISCUSSION: Oral health promotion is based on the need to change the cognition, motivation, and behavior of the individual aimed at the improvement of oral health and prevention of diseases. This is a challenging goal to achieve. It has been established that the acquisition of knowledge does not necessarily lead to a change in behavior. The current concept of oral health promotion recognizes the importance of the surrounding physical and social environment, lifestyle, individual behavior, and accessibility of health services. The so-called “Approach to the common risk factor” was introduced and established itself. It is based on the fact that many diseases have common predisposing risk factors. The approach to the general risk factor justifies dental professionals for the development of multidisciplinary partnerships. This makes it possible to prevent various illnesses more efficiently and cost-effectively than by just focusing on one specific disease. CONCLUSIONS: The concept of health promotion needs to be popularized and established as an effective practice for improving public health, both among the general public and among the medical community. The imposition of a promotional approach in dental practice requires interdisciplinary cooperation with other health professionals and the limitation of the curative one.

  • Open Access

    Case Report: Digital analysis of occlusion with T-Scan Novus in occlusal splint treatment for a patient with bruxism

    by Dobromira Shopova, Tanya Bozhkova, Svetlana Yordanova, Miroslava Yordanova

    Bruxism is a disease with a multifactorial etiology. Its clinical manifestations are most often an unaesthetic smile with abraded tooth surfaces, temporomandibular disorders and muscle hyperactivity. Here we present a case of bruxism where proper articulation of the occlusal splint was performed using the T-scan Novus system. A patient with bruxism underwent treatment with stabilization splint made by 3D printer technology. Intraoral scanning was performed using Trios Color (3Shape, 2014), and the digital design was achieved using the 3Shape Dental system design - splint studio. Formlabs Form 2 printer with biocompatible resin Dental LT Clear Resin was used for printing. The T-Scan Novus system with software attached to it, version 9.1, was used for digital examination of the occlusion. A 2.7 mm thick occlusal splint was developed, and the software adapted the occlusion with antagonists. After adjustment with T-Scan Novus, a reduction in disocclusion time of the patient was achieved, which is a desired result in the treatment of bruxism. The position of the joint components was proven radiologically. The treatment of bruxism with splint therapy continues to be the main method of treatment. Using digital technology allows for more accurate constructions and precise balancing of occlusal relationships.


  • Open Access

    Survey Study among Dentist in Bulgaria to Develop a Model for Risk Management in Dental Practice

    by Tihomira Schiller, Nina Musurlieva, Tanya Bozhkova, Veselina Kondeva, Mariana Dimitrova, Sevda Rimalovska

    Background. Quality control and risk management in the field of dental services is an important part of improving patient safety as well as that of the dentists. The introduction of a risk management model would simplify and facilitate this process. Aim. The aim of the study is to gather information about the structurе and organization of work processes in Bulgarian dental practices, which will serve as a basis for building a risk management model. Material and Methods. A survey was conducted among randomly selected dental associations in Bulgaria‐Plovdiv, Sofia, Varna, and Burgas through an anonymized questionnaire, containing 30 questions. The respondents meet the main criteria, namely, to be dentists and to practice in Bulgaria. The study includes demographic data, information on the attitude of Bulgarian dentists towards issues related to quality management, and safety and risk in respect to dental practice. The results have been processed and analyzed through descriptive and graphical analysis using the statistical program SPSS 20.0. Results. A total of 103 Bulgarian dentists took part in the study, out of which 25.24% ± 4.28% have acquired a specialty. Women are 52.43% ± 4.92%, and men −47.57% ± 4.92%. The largest is the relative share of the respondents in the age range of 25‐35 years −63.10% ± 4.75% and with work experience of 6‐15 years −52.43% ± 4.92%. Most of the respondents do not define in writing the main tasks and activities −52.43% ± 4.92%, and do not use checklists in their practice ‐54.73%. The majority of the respondents do not hold regular meetings with their teams −50.49% ± 4.93%, as well as they do not conduct surveys among their patients −68.93% ± 4.56%. The majority of the respondents −41.75% ± 4.86% are guided by their personal judgment in respect to whether the written information provided to patients is comprehensible and accessible. The majority of dentists −45.63% ± 4.91% take informed consent only for expensive procedures in written and oral form −53.40% ± 4.92%. Out of all the respondents, 75.73% ± 4.22% have not analyzed the risk of slipping in their practices for the last two years. Conclusion. There is a lack of written definition of the main tasks and processes, as well as no use of checklists in the practices of most of the interviewed dentists. Meetings with teams are held irregularly. There is a lack of surveys among patients, as well as no objective feedback from patients regarding the comprehensibility of the information materials provided. Informed consent is obtained from patients mainly in written and oral form and only for costly manipulations. In the practices of most of the interviewed dentists, there has been no assessment of the risk of slipping and falling for the last 2 years.


  • Open Access

    COVID-19 Pandemic Impact on Dental Practice

    by Tanya Bozhkova, Nina Musurlieva

    Introduction: The COVID-19 pandemic has had a huge impact on the dentistry industry from the initial lockdown in March 2020 to the present day, nearly one year later with dentists unable to practice during the initial lockdown, that is when revenue took the biggest hit. The study aims to examine the impact of COVID-19 on dental practices during the pandemic in Bulgaria. Material and methods: A specially developed questionnaire was distributed electronically among 138 dentists from all regions of Bulgaria. The collected primary statistical information was entered and processed with the statistical package SPSS Statistics 19.0 Results: Statistical analyzes of the questionnaire show that (62,32%±4,12) of dentists say COVID-19 made no impact on their decision to retire or continue practicing; 43% of respondents predict revenue or costs will be the biggest challenge facing their practice in 2021. Part of dentists (34.78 % ± 4,05) believe that COVID-19 allowed them to learn more about infection control. Most of the respondents (87.68% ± 2.79) agree their income was lower in April to September of 2020 compared to 2019. More than half of dentists (61.59 % ± 4.14) believe Covid 19 has not impacted the products or services they offer. The majority of the participants (84.78 % ± 3.05) did not perform non-emergency procedures during the pandemic. Conclusion: Despite the numerous disadvantages caused by the COVID-19 pandemic, our survey shows dentists have found ways to adapt and succeed. Introduction: The COVID-19 pandemic has had a huge impact on the dentistry industry from the initial lockdown in March 2020 to the present day, nearly one year later with dentists unable to practice during the initial lockdown, that is when revenue took the biggest hit. The study aims to examine the impact of COVID-19 on dental practices during the pandemic in Bulgaria. Material and methods: A specially developed questionnaire was distributed electronically among 138 dentists from all regions of Bulgaria. The collected primary statistical information was entered and processed with the statistical package SPSS Statistics 19.0 Results: Statistical analyzes of the questionnaire show that (62,32%±4,12) of dentists say COVID-19 made no impact on their decision to retire or continue practicing; 43% of respondents predict revenue or costs will be the biggest challenge facing their practice in 2021. Part of dentists (34.78 % ± 4,05) believe that COVID-19 allowed them to learn more about infection control. Most of the respondents (87.68% ± 2.79) agree their income was lower in April to September of 2020 compared to 2019. More than half of dentists (61.59 % ± 4.14) believe Covid 19 has not impacted the products or services they offer. The majority of the participants (84.78 % ± 3.05) did not perform non-emergency procedures during the pandemic. Conclusion: Despite the numerous disadvantages caused by the COVID-19 pandemic, our survey shows dentists have found ways to adapt and succeed.

  • Open Access

    T-Scan Novus System in the Management of Splints—Pilot Study

    by Tanya Bozhkova, Dobromira Shopova

    The purpose of this pilot study was to demonstrate the capabilities of the T-Scan Novus system in bruxism treatment by splints. Bruxism patients underwent treatment with a splint made by additive manufacturing. Intraoral scanning was performed using Trios Color (3Shape), and digital design was performed using 3Shape Dental system design - splint studio. The biocompatible material Dental LT Clear Resin was printed using a Formlabs Form 2 printer. The T-Scan Novus system with a software attached to it, version 9.1, was used for digital examination of the occlusion. A splint with an occlusal thickness of 2.5 mm was developed and software adapted with relief to antagonists. The digitally set occlusion with even contacts turned out to be clinically unbalanced. After adjusting with T-Scan Novus, a balanced occlusion was achieved in the right and left halves. The treatment of bruxism with splint therapy continues to be the main method. Its combination with digital technologies allows more precise constructions and more accurate balancing of occlusal relationships.


  • Open Access

    Case Report: Digital analysis of occlusion with T-Scan Novus in occlusal splint treatment for a patient with bruxism

    by Dobromira Shopova, Tanya Bozhkova, Svetlana Yordanova, Miroslava Yordanova

    Bruxism is a disease with a multifactorial etiology. Its clinical manifestations are most often an unaesthetic smile with abraded tooth surfaces, temporomandibular disorders and muscle hyperactivity. Here we present a case of bruxism where proper articulation of the occlusal splint was performed using the T-scan Novus system. A patient with bruxism underwent treatment with stabilization splint made by 3D printer technology. Intraoral scanning was performed using Trios Color (3Shape, 2014), and the digital design was achieved using the 3Shape Dental system design - splint studio. Formlabs Form 2 printer with biocompatible resin Dental LT Clear Resin was used for printing. The T-Scan Novus system with software attached to it, version 9.1, was used for digital examination of the occlusion. A 2.7 mm thick occlusal splint was developed, and the software adapted the occlusion with antagonists. After adjustment with T-Scan Novus, a reduction in disocclusion time of the patient was achieved, which is a desired result in the treatment of bruxism. The position of the joint components was proven radiologically. The treatment of bruxism with splint therapy continues to be the main method of treatment. Using digital technology allows for more accurate constructions and precise balancing of occlusal relationships.