Farong Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Farong Huang has a total of 171 co-authors. Here are the top co-authors by number of shared publications:
Lei Du
Key Laboratory of Specially Functional Polymeric Materials and Related Technology (East China University of Science and Technology),Ministry of Education, East China University of Science and Technology,Shanghai,China
53 shared publicationsLiqiang Wan
22 shared publicationsYan Zhou
21 shared publications- Liqiang Wan
Key Laboratory of Specially Functional Polymeric Materials and Related Technology (Ministry of Education), School of Materials Science and Engineering East China University of Science and Technology Shanghai China
20 shared publications Qiaolong Yuan
Key Laboratory of Specially Functional Polymeric Materials and Related Technology (Ministry of Education), School of Materials Science and Engineering, East China University of Science and Technology, Shanghai, China
14 shared publicationsJian Zhang
11 shared publications
Latest Publications
- Open Access
- 15 April 2026
- Published by Elsevier in SSRN Electronic Journal
Self-standing, Easily Moldable Macroscale Conjugated Microporous Material based on Poly(silylene arylacetylene) for High-efficiency Adsorption and Separation of Lead Ions
Microporous materials have been extensively studied in the field of Pb2+ adsorption, however, their shaping issues have long been a persistent challenge. In this study, a novel macroscale conjugated microporous polymer, denoted as cPSA, was synthesized through crosslink reaction. The formation mechanism of the porous structure and the subsequent adsorption behaviour were investigated through structure characterization and kinetic studies. Remarkably, cPSA exhibited rapid adsorption kinetics, achieving equilibrium within 5 minutes. The exceptional adsorption capacity and selectivity for Pb2+ ions are attributed to the densely packed aromatic frameworks within the polymer matrix which facilitate strong π-complexation interactions with the target metal ions. To demonstrate practical applicability, cPSA was prepared into a self-standing membrane. The cPSA membrane exhibited outstanding performance in selective Pb2+ adsorption from complex aqueous matrices containing high concentrations of competing heavy metal ions, achieving a separation factor (SF) of up to 77.8. These results highlight the potential of cPSA for implementation in water purification and Pb2+ separation applications.
- 15 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSelf-standing, Easily Moldable Macroscale Conjugated Microporous Material based on Poly(silylene arylacetylene) for High-efficiency Adsorption and Separation of Lead Ions
Microporous materials have been extensively studied in the field of Pb2+ adsorption, however, their shaping issues have long been a persistent challenge. In this study, a novel macroscale conjugated microporous polymer, denoted as cPSA, was synthesized through crosslink reaction. The formation mechanism of the porous structure and the subsequent adsorption behaviour were investigated through structure characterization and kinetic studies. Remarkably, cPSA exhibited rapid adsorption kinetics, achieving equilibrium within 5 minutes. The exceptional adsorption capacity and selectivity for Pb2+ ions are attributed to the densely packed aromatic frameworks within the polymer matrix which facilitate strong π-complexation interactions with the target metal ions. To demonstrate practical applicability, cPSA was prepared into a self-standing membrane. The cPSA membrane exhibited outstanding performance in selective Pb2+ adsorption from complex aqueous matrices containing high concentrations of competing heavy metal ions, achieving a separation factor (SF) of up to 77.8. These results highlight the potential of cPSA for implementation in water purification and Pb2+ separation applications.
- Open Access
- 3 March 2026
- Published by Elsevier in SSRN Electronic Journal
Effect of Aliphatic Spacers on the Properties of Vanillin-Derived Epoxy Vitrimers
The utilization of biomass for the preparation of recyclable epoxy vitrimers is highly beneficial for material sustainability. Vanillin and maleic anhydride were utilized to synthesize a novel copolymer (VME) with epoxy groups. Subsequently, aliphatic epoxy resins with varying lengths of spacers were synthesized by using several carboxylic acids derived from biomass, and reacted with VME respectively to prepare recyclable epoxy vitrimers with high biomass contents. The optimized combination of the rigid aromatic structure of VME and the flexible structures of aliphatic epoxy endows the vitrimers with high mechanical properties and recycling efficiency. The research results show the length of the aliphatic spacer significantly influences the properties of vanillin-derived vitrimers. The vitrimer introduced the diglycidyl ester of sebacic acid exhibits a high tensile strength (72.9 MPa) and elongation at break (8.6%), as well as a high recyclability (90.5%).
- 3 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEffect of Aliphatic Spacers on the Properties of Vanillin-Derived Epoxy Vitrimers
The utilization of biomass for the preparation of recyclable epoxy vitrimers is highly beneficial for material sustainability. Vanillin and maleic anhydride were utilized to synthesize a novel copolymer (VME) with epoxy groups. Subsequently, aliphatic epoxy resins with varying lengths of spacers were synthesized by using several carboxylic acids derived from biomass, and reacted with VME respectively to prepare recyclable epoxy vitrimers with high biomass contents. The optimized combination of the rigid aromatic structure of VME and the flexible structures of aliphatic epoxy endows the vitrimers with high mechanical properties and recycling efficiency. The research results show the length of the aliphatic spacer significantly influences the properties of vanillin-derived vitrimers. The vitrimer introduced the diglycidyl ester of sebacic acid exhibits a high tensile strength (72.9 MPa) and elongation at break (8.6%), as well as a high recyclability (90.5%).
- 13 February 2026
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 23 (4) , 1897-1908
A diamino double-decker silsesquioxane as a reactive nanoadditive to enhance the corrosion resistance of an epoxy coating
- 13 February 2026
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 23 (4) , 1897-1908
A diamino double-decker silsesquioxane as a reactive nanoadditive to enhance the corrosion resistance of an epoxy coating
- 9 December 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (9)
A Biomass‐Based Epoxy Vitrimer Derived From Eugenol With High‐Strength and Excellent Recyclability
The synthesis and recycling of biomass‐based polymeric materials represent an effective strategy to address energy and environmental challenges, holding significant importance for sustainable development. In this study, an epoxy resin was synthesized from eugenol and subsequently crosslinked with succinic anhydride in the presence of Zn 2+ to produce recyclable vitrimeric materials. When the epoxy‐to‐anhydride ratio was 2:1, the vitrimer could be reprocessed at 190°C and the recycling efficiency exceeded 90%. Notably, the unique alternating structure of flexible polymer chains and rigid benzene rings endows the material with high tensile strength (> 90 MPa) while maintaining an elongation at break exceeding 10%.
- 9 December 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (9)
A Biomass‐Based Epoxy Vitrimer Derived From Eugenol With High‐Strength and Excellent Recyclability
The synthesis and recycling of biomass‐based polymeric materials represent an effective strategy to address energy and environmental challenges, holding significant importance for sustainable development. In this study, an epoxy resin was synthesized from eugenol and subsequently crosslinked with succinic anhydride in the presence of Zn 2+ to produce recyclable vitrimeric materials. When the epoxy‐to‐anhydride ratio was 2:1, the vitrimer could be reprocessed at 190°C and the recycling efficiency exceeded 90%. Notably, the unique alternating structure of flexible polymer chains and rigid benzene rings endows the material with high tensile strength (> 90 MPa) while maintaining an elongation at break exceeding 10%.
- 27 August 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (48)
The Investigation on Effect of the Curing Temperature on the Properties of Poly(Silylene Arylacetylene)
Poly(silylene arylacetylene) (PSA) resins serve as a heat‐resistant resin matrix and can be used for functional materials such as wave transmission and ablation materials. In this work, the relationship between the curing temperature and properties of a poly(dimethylsiliylene ethynylenephenyleneethynylene) (PSA‐M) resin was investigated. The curing degree of the cured PSA‐M resins was characterized by the acetylene groups content. The porosity, density, water uptake, mechanical properties, and thermal stability of the cured PSA‐M resins with various curing degrees were investigated. The results reveal that the properties of the cured PSA‐M resins change obviously as the curing temperature increases. With the curing temperature increasing, the density of the cured PSA‐M resins decreases a little and then obviously increases. The flexural strengths of cured PSA resins gradually decrease and then reach a stable value, while the flexural moduli first decrease slightly and then increase for the cured PSA‐M resins with the increase in the curing temperature. When the curing degree arrives at a certain extent, the coefficient of thermal expansion of the cured PSA‐M resins tends to remain stable from room temperature to 450°C.
- 27 August 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 142 (48)
The Investigation on Effect of the Curing Temperature on the Properties of Poly(Silylene Arylacetylene)
Poly(silylene arylacetylene) (PSA) resins serve as a heat‐resistant resin matrix and can be used for functional materials such as wave transmission and ablation materials. In this work, the relationship between the curing temperature and properties of a poly(dimethylsiliylene ethynylenephenyleneethynylene) (PSA‐M) resin was investigated. The curing degree of the cured PSA‐M resins was characterized by the acetylene groups content. The porosity, density, water uptake, mechanical properties, and thermal stability of the cured PSA‐M resins with various curing degrees were investigated. The results reveal that the properties of the cured PSA‐M resins change obviously as the curing temperature increases. With the curing temperature increasing, the density of the cured PSA‐M resins decreases a little and then obviously increases. The flexural strengths of cured PSA resins gradually decrease and then reach a stable value, while the flexural moduli first decrease slightly and then increase for the cured PSA‐M resins with the increase in the curing temperature. When the curing degree arrives at a certain extent, the coefficient of thermal expansion of the cured PSA‐M resins tends to remain stable from room temperature to 450°C.
- Open Access
- 4 August 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (8) , 416
The Effect of the Structure of Aromatic Diamine on High-Performance Epoxy Resins
To study the influence of curing agent structure on the properties of epoxy resin, four types of aromatic diamines with the structure of diphenyl methane (4,4′-methylenedianiline (MDA), 4,4′-methylenebis(2-ethylaniline) (MOEA), 4,4′-methylenebis(2-chloroaniline) (MOCA), and 4,4′-methylenebis(3-chloro-2,6-diethylaniline) (MCDEA)) and a high-performance epoxy resin, 3-(oxiran-2-ylmethoxy)-N,N-bis(oxiran-2-ylmethyl)aniline (AFG-90MH), were used in this study. The resulting resin systems were designated as AFG-90MH-MDA, AFG-90MH-MOEA, AFG-90MH-MOCA, and AFG-90MH-MCDEA. After curing, these systems were named AFG-90MH-MDA-C, AFG-90MH-MOEA-C, AFG-90MH-MOCA-C, and AFG-90MH-MCDEA-C. The influence of the structure of the diamines on the processability, curing reaction activity, and thermal and mechanical properties (including flexural and tensile properties) of the epoxy resins were investigated. These systems demonstrate excellent processability with wide processing windows ranging from 30 °C to 110–160 °C while maintaining low viscosity. Consistent apparent activation energy (Ea) trends via both Kissinger and Flynn-Wall-Ozawa methods were observed. The epoxy systems exhibit the following increasing Ea sequence: AFG-90MH-MDA < AFG-90MH-MOEA < AFG-90MH-MOCA < AFG-90MH-MCDEA. The processability and curing reaction kinetic results indicate that the reactivities of the diamines decrease in the order: MDA > MOEA > MOCA > MCDEA. Polar chlorine substituents in diamines strengthen intermolecular interactions, thereby enhancing mechanical performance. The flexural strength of cured epoxy systems decreases as follows with corresponding values: AFG-90MH-MOCA-C (165 MPa) > AFG-90MH-MDA-C (158 MPa) > AFG-90MH-MCDEA-C (148 MPa) > AFG-90MH-MOEA-C (136 MPa). Diamines with substituents like chlorine or ethyl groups reduce the glass transition temperatures (Tg) of the cured resin systems. However, the cured resin systems with the diamines containing chlorine demonstrate superior thermal performance compared to those with ethyl groups. The cured epoxy systems exhibit the following descending glass transition temperature order with corresponding values: AFG-90MH-MDA-C (213 °C) > AFG-90MH-MOCA-C (190 °C) > AFG-90MH-MCDEA-C (183 °C) > AFG-90MH-MOEA-C (172 °C).
- 4 August 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (8) , 416
Open AccessThe Effect of the Structure of Aromatic Diamine on High-Performance Epoxy Resins
To study the influence of curing agent structure on the properties of epoxy resin, four types of aromatic diamines with the structure of diphenyl methane (4,4′-methylenedianiline (MDA), 4,4′-methylenebis(2-ethylaniline) (MOEA), 4,4′-methylenebis(2-chloroaniline) (MOCA), and 4,4′-methylenebis(3-chloro-2,6-diethylaniline) (MCDEA)) and a high-performance epoxy resin, 3-(oxiran-2-ylmethoxy)-N,N-bis(oxiran-2-ylmethyl)aniline (AFG-90MH), were used in this study. The resulting resin systems were designated as AFG-90MH-MDA, AFG-90MH-MOEA, AFG-90MH-MOCA, and AFG-90MH-MCDEA. After curing, these systems were named AFG-90MH-MDA-C, AFG-90MH-MOEA-C, AFG-90MH-MOCA-C, and AFG-90MH-MCDEA-C. The influence of the structure of the diamines on the processability, curing reaction activity, and thermal and mechanical properties (including flexural and tensile properties) of the epoxy resins were investigated. These systems demonstrate excellent processability with wide processing windows ranging from 30 °C to 110–160 °C while maintaining low viscosity. Consistent apparent activation energy (Ea) trends via both Kissinger and Flynn-Wall-Ozawa methods were observed. The epoxy systems exhibit the following increasing Ea sequence: AFG-90MH-MDA < AFG-90MH-MOEA < AFG-90MH-MOCA < AFG-90MH-MCDEA. The processability and curing reaction kinetic results indicate that the reactivities of the diamines decrease in the order: MDA > MOEA > MOCA > MCDEA. Polar chlorine substituents in diamines strengthen intermolecular interactions, thereby enhancing mechanical performance. The flexural strength of cured epoxy systems decreases as follows with corresponding values: AFG-90MH-MOCA-C (165 MPa) > AFG-90MH-MDA-C (158 MPa) > AFG-90MH-MCDEA-C (148 MPa) > AFG-90MH-MOEA-C (136 MPa). Diamines with substituents like chlorine or ethyl groups reduce the glass transition temperatures (Tg) of the cured resin systems. However, the cured resin systems with the diamines containing chlorine demonstrate superior thermal performance compared to those with ethyl groups. The cured epoxy systems exhibit the following descending glass transition temperature order with corresponding values: AFG-90MH-MDA-C (213 °C) > AFG-90MH-MOCA-C (190 °C) > AFG-90MH-MCDEA-C (183 °C) > AFG-90MH-MOEA-C (172 °C).
- 3 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 3 (6) , 1834-1843
Preparation and Properties of SiC Ceramic Aerogels with High Temperature Oxidation Resistance
In this study, vinyl hydrogenated polycarbosilane (VHPCS) was utilized as the polymer precursor, while 1,4-dioxane served as the solvent. Tert-butyl peroxybenzoate (TBPB) and cobalt 2-ethylhexanoate (COEH) were applied as the initiator and accelerator for VHPCS, respectively. These additives significantly enhanced the reactivity of VHPCS, enabling the preparation of VHPCS gel under low-temperature and ambient pressure conditions. SiC ceramic aerogels were subsequently produced by freeze-drying and ceramization of the VHPCS gel. The resulting aerogels exhibited a low density of 0.25 g/cm3, a thermal conductivity of 0.098 W/(m·K) at room temperature, along with excellent heat insulating property. Thermogravimetric analysis (TGA) demonstrated minimal mass loss when the samples were heated to 1000 °C in air, confirming their exceptional high-temperature oxidative stability. These characteristics are consistent with the superior thermostability reported for advanced SiC-based composites.
- 3 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 3 (6) , 1834-1843
Preparation and Properties of SiC Ceramic Aerogels with High Temperature Oxidation Resistance
In this study, vinyl hydrogenated polycarbosilane (VHPCS) was utilized as the polymer precursor, while 1,4-dioxane served as the solvent. Tert-butyl peroxybenzoate (TBPB) and cobalt 2-ethylhexanoate (COEH) were applied as the initiator and accelerator for VHPCS, respectively. These additives significantly enhanced the reactivity of VHPCS, enabling the preparation of VHPCS gel under low-temperature and ambient pressure conditions. SiC ceramic aerogels were subsequently produced by freeze-drying and ceramization of the VHPCS gel. The resulting aerogels exhibited a low density of 0.25 g/cm3, a thermal conductivity of 0.098 W/(m·K) at room temperature, along with excellent heat insulating property. Thermogravimetric analysis (TGA) demonstrated minimal mass loss when the samples were heated to 1000 °C in air, confirming their exceptional high-temperature oxidative stability. These characteristics are consistent with the superior thermostability reported for advanced SiC-based composites.
- 19 November 2024
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 16 (1) , 37-44
A new recyclable polymer based on Diels–Alder crosslinking networks derived from anisaldehyde
The preparation of recyclable cross-linked polymers by combining biomass-based resources with dynamic covalent bonds is a promising strategy for the preparation of sustainable and recyclable thermosetting materials. In this paper, a biomass-based epoxy resin was synthesized from anisaldehyde, and then a biomass-based polymeric material was prepared using Diels–Alder chemistry. The biomass-based material exhibits high mechanical strength and light transparency. The tensile strength and elongation of the biomass-based material at a temperature of 315 °C with a weight loss of 5% (Td5) were 79.7 MPa and 12.2%, respectively, which are higher than those of material synthesized from petroleum-based (bisphenol A) epoxy resin. The biomass-based film material with a thickness of 0.14 mm has a transmittance of up to 89% in the light wavelength range of 550–1200 nm. Moreover, the biomass-based material showed good recyclability.
- 19 November 2024
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 16 (1) , 37-44
A new recyclable polymer based on Diels–Alder crosslinking networks derived from anisaldehyde
The preparation of recyclable cross-linked polymers by combining biomass-based resources with dynamic covalent bonds is a promising strategy for the preparation of sustainable and recyclable thermosetting materials. In this paper, a biomass-based epoxy resin was synthesized from anisaldehyde, and then a biomass-based polymeric material was prepared using Diels–Alder chemistry. The biomass-based material exhibits high mechanical strength and light transparency. The tensile strength and elongation of the biomass-based material at a temperature of 315 °C with a weight loss of 5% (Td5) were 79.7 MPa and 12.2%, respectively, which are higher than those of material synthesized from petroleum-based (bisphenol A) epoxy resin. The biomass-based film material with a thickness of 0.14 mm has a transmittance of up to 89% in the light wavelength range of 550–1200 nm. Moreover, the biomass-based material showed good recyclability.
- 18 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 6 (14) , 8651-8658
Heat-Resistant Dendritic Poly(methylsilane arylacetylene) with Attractive Mechanical Properties Enhanced Via Higher Curing Temperature
- 18 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 6 (14) , 8651-8658
Heat-Resistant Dendritic Poly(methylsilane arylacetylene) with Attractive Mechanical Properties Enhanced Via Higher Curing Temperature
- Open Access
Novel Reactive Polyhedral Oligomeric Silsesquioxane-Reinforced and Toughened Epoxy Resins for Advanced Composites
Most toughening methods for epoxy resins are usually used at the expense of other properties. Some polyhedral oligomeric silsesquioxanes (POSSs) with both a rigid Si-O-Si structure and flexible organic chain segments could be expected to be effective toughening agents. In this study, three reactive polyhedral oligomeric silsesquioxanes with a thiol group (OMPPS), a carboxyl group (OCOPS), and an epoxy group (OGCPS) were synthesized and characterized. They were utilized as modifiers to toughen 3-(oxiran-2-ylmethoxy)-N,N-bis(oxiran-2-ylmethyl)aniline (AFG-90MH)/4,4′-methylenebis(2-ethylaniline) (MOEA) (epoxy resin) with different molar ratios to obtain hybrid resins named OMPPS-EP-i, OCOPS-EP-j, and OGCPS-EP-k. The effects of the amount of modifier added and the length of the organic chain on the cage structure on various properties of the hybrid resins were investigated. The results show that all three modifiers show good compatibility with the epoxy resin. The hybrid resins have a low viscosity at 45~85 °C and can be cured at a low temperature (110 °C). The cured hybrid resins display improved toughness. Typically, the critical stress intensity factor (KIC) and impact strength of OGCPS-EP-0.6-C are 2.54 MPa∙m−1/2 and 19.33 kJ∙m−2, respectively, which increased by 58.75% and 22.48% compared with the pristine epoxy resin, respectively. In addition, the glass transition temperature and flexural strength of the hybrid resins are basically unchanged.
Open AccessNovel Reactive Polyhedral Oligomeric Silsesquioxane-Reinforced and Toughened Epoxy Resins for Advanced Composites
Most toughening methods for epoxy resins are usually used at the expense of other properties. Some polyhedral oligomeric silsesquioxanes (POSSs) with both a rigid Si-O-Si structure and flexible organic chain segments could be expected to be effective toughening agents. In this study, three reactive polyhedral oligomeric silsesquioxanes with a thiol group (OMPPS), a carboxyl group (OCOPS), and an epoxy group (OGCPS) were synthesized and characterized. They were utilized as modifiers to toughen 3-(oxiran-2-ylmethoxy)-N,N-bis(oxiran-2-ylmethyl)aniline (AFG-90MH)/4,4′-methylenebis(2-ethylaniline) (MOEA) (epoxy resin) with different molar ratios to obtain hybrid resins named OMPPS-EP-i, OCOPS-EP-j, and OGCPS-EP-k. The effects of the amount of modifier added and the length of the organic chain on the cage structure on various properties of the hybrid resins were investigated. The results show that all three modifiers show good compatibility with the epoxy resin. The hybrid resins have a low viscosity at 45~85 °C and can be cured at a low temperature (110 °C). The cured hybrid resins display improved toughness. Typically, the critical stress intensity factor (KIC) and impact strength of OGCPS-EP-0.6-C are 2.54 MPa∙m−1/2 and 19.33 kJ∙m−2, respectively, which increased by 58.75% and 22.48% compared with the pristine epoxy resin, respectively. In addition, the glass transition temperature and flexural strength of the hybrid resins are basically unchanged.