Yuming Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yuming Chen has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Maowen Xu
School of Materials and Energy, Southwest University, Chongqing 400715, China
7 shared publications Bingshu Guo
Department of Nuclear Science and Engineering, Institute for Clean Energy & Advanced Materials, Faculty of Materials and Energy, Southwest University, Chongqing 400715, PR China
4 shared publicationsTingting Yang
Department of Nuclear Science and Engineering, Institute for Clean Energy & Advanced Materials, Faculty of Materials and Energy, Southwest University, Chongqing 400715, PR China
4 shared publications- Shu-Juan Bao
Southwest University
3 shared publications Wenyan Du
Department of Nuclear Science and Engineering, Institute for Clean Energy & Advanced Materials, Faculty of Materials and Energy, Southwest University, Chongqing 400715, PR China
3 shared publicationsChunlong Dai
Faculty of Materials and Energy Southwest University Chongqing 400715 P. R. China
2 shared publications
Latest Publications
- 1 April 2020
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 565, 63-69
Cobalt nanoparticles embedded into free-standing carbon nanofibers as catalyst for room-temperature sodium-sulfur batteries
- 1 April 2020
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 565, 63-69
Cobalt nanoparticles embedded into free-standing carbon nanofibers as catalyst for room-temperature sodium-sulfur batteries
- 16 March 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (22) , 11899-11907
In situsynthesis of a MOFs/PAA hybrid with ultrahigh ionic current rectification
In recent decades, the ionic current rectification (ICR) property of asymmetric nanochannels has been widely explored in applications of energy conversion, gas separation, water purification and bioanalysis/sensors. How to fabricate nanofluidic devices with a high ICR characteristic remains of critical importance to the development of nanofluidics. Herein, we fabricated an asymmetric MOFs/PAA hybrid via in situ synthesis of a zeolitic imidazole framework (ZIF-90) on porous anodic alumina (PAA) nanochannels. The introduction of asymmetric geometry and charge distribution provides the hybrid with ultrahigh ionic rectification, which can be easily measured using an electrochemical detector. This rectification mechanism is elucidated via finite element simulation, which proves that asymmetric geometry as well as the protonation and deprotonation under varied pH values dominates the ICR property. With the advantages of low cost and facile fabrication while supporting high ionic current rectification, the prepared MOFs/PAA hybrid can be considered as a significant paradigm in nanofluidic systems and has potential applications in the fields of new ionic devices and energy conversion systems.
- 16 March 2020
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 12 (22) , 11899-11907
In situsynthesis of a MOFs/PAA hybrid with ultrahigh ionic current rectification
In recent decades, the ionic current rectification (ICR) property of asymmetric nanochannels has been widely explored in applications of energy conversion, gas separation, water purification and bioanalysis/sensors. How to fabricate nanofluidic devices with a high ICR characteristic remains of critical importance to the development of nanofluidics. Herein, we fabricated an asymmetric MOFs/PAA hybrid via in situ synthesis of a zeolitic imidazole framework (ZIF-90) on porous anodic alumina (PAA) nanochannels. The introduction of asymmetric geometry and charge distribution provides the hybrid with ultrahigh ionic rectification, which can be easily measured using an electrochemical detector. This rectification mechanism is elucidated via finite element simulation, which proves that asymmetric geometry as well as the protonation and deprotonation under varied pH values dominates the ICR property. With the advantages of low cost and facile fabrication while supporting high ionic current rectification, the prepared MOFs/PAA hybrid can be considered as a significant paradigm in nanofluidic systems and has potential applications in the fields of new ionic devices and energy conversion systems.
- Open Access
- 30 September 2019
- Published by Wiley in Advanced Science
- Vol. 6 (23) , 1901557
Design and Construction of Sodium Polysulfides Defense System for Room‐Temperature Na–S Battery
Room‐temperature Na–S batteries are facing one of the most serious challenges of charge/discharge with long cycling stability due to the severe shuttle effect and volume expansion. Herein, a sodium polysulfides defense system is presented by designing and constructing the cathode‐separator double barriers. In this strategy, the hollow carbon spheres are decorated with MoS2 (HCS/MoS2) as the S carrier (S@HCS/MoS2). Meanwhile, the HCS/MoS2 composite is uniformly coated on the surface of the glass fiber as the separator. During the discharge process, the MoS2 can adsorb soluble polysulfides (NaPSs) intermediates and the hollow carbon spheres can improve the conductivity of S as well as act as the reservoir for electrolyte and NaPSs, inhibiting them from entering the anode to make Na deteriorate. As a result, the cathode‐separator group applied to room‐temperature Na–S battery can enable a capacity of ≈1309 mAh g−1 at 0.1 C and long cycling life up to 1000 cycles at 1 C. This study provides a novel and effective way to develop durable room‐temperature Na–S batteries.
- 30 September 2019
- Published by Wiley in Advanced Science
- Vol. 6 (23) , 1901557
Open AccessDesign and Construction of Sodium Polysulfides Defense System for Room‐Temperature Na–S Battery
Room‐temperature Na–S batteries are facing one of the most serious challenges of charge/discharge with long cycling stability due to the severe shuttle effect and volume expansion. Herein, a sodium polysulfides defense system is presented by designing and constructing the cathode‐separator double barriers. In this strategy, the hollow carbon spheres are decorated with MoS2 (HCS/MoS2) as the S carrier (S@HCS/MoS2). Meanwhile, the HCS/MoS2 composite is uniformly coated on the surface of the glass fiber as the separator. During the discharge process, the MoS2 can adsorb soluble polysulfides (NaPSs) intermediates and the hollow carbon spheres can improve the conductivity of S as well as act as the reservoir for electrolyte and NaPSs, inhibiting them from entering the anode to make Na deteriorate. As a result, the cathode‐separator group applied to room‐temperature Na–S battery can enable a capacity of ≈1309 mAh g−1 at 0.1 C and long cycling life up to 1000 cycles at 1 C. This study provides a novel and effective way to develop durable room‐temperature Na–S batteries.
- 16 April 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (19) , 12276-12282
Double-walled N-doped carbon@NiCo2S4 hollow capsules as SeS2 hosts for advanced Li–SeS2 batteries
Double-walled N-doped carbon@NiCo2S4 hollow capsules as SeS2 hosts to adsorb polyselenium/sulfide and to facilitate the reaction kinetics of Li–SeS2 batteries.
- 16 April 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (19) , 12276-12282
Double-walled N-doped carbon@NiCo2S4 hollow capsules as SeS2 hosts for advanced Li–SeS2 batteries
Double-walled N-doped carbon@NiCo2S4 hollow capsules as SeS2 hosts to adsorb polyselenium/sulfide and to facilitate the reaction kinetics of Li–SeS2 batteries.
- 20 November 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (1) , 150-156
A railway-like network electrode design for room temperature Na–S battery
Poor conductivity and severe volume expansion of sulfur (S) electrode are the key issues for the practical application of room temperature Na–S battery. In this paper, we propose a 3D railway-like electrode design to tackle these problems for room temperature Na–S battery. Nitrogen-doped porous carbon polyhedrons (NPCs) as “station” for loading S are tightly concatenated by 1D carbon nanotubes (CNTs) as “railway” for transporting electrons to form a 3D railway-like network (CNT/NPC) as S host. The 3D cross-linked railway-like network not only facilitates the rapid transfer of electrons for high capacity but also connects the polyhedrons during the cycling maintaining the integrity of the electrode. With this rational design, 3D railway-like S@CNT/NPC electrode shows a high discharge capacity of ∼601 mA h g−1 at 0.5C and outstanding rate capability. In addition, a high capacity of 410 mA h g−1 can still be achieved after 500 cycles with a very low capacity decay rate of 0.064% per cycle.
- 20 November 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (1) , 150-156
A railway-like network electrode design for room temperature Na–S battery
Poor conductivity and severe volume expansion of sulfur (S) electrode are the key issues for the practical application of room temperature Na–S battery. In this paper, we propose a 3D railway-like electrode design to tackle these problems for room temperature Na–S battery. Nitrogen-doped porous carbon polyhedrons (NPCs) as “station” for loading S are tightly concatenated by 1D carbon nanotubes (CNTs) as “railway” for transporting electrons to form a 3D railway-like network (CNT/NPC) as S host. The 3D cross-linked railway-like network not only facilitates the rapid transfer of electrons for high capacity but also connects the polyhedrons during the cycling maintaining the integrity of the electrode. With this rational design, 3D railway-like S@CNT/NPC electrode shows a high discharge capacity of ∼601 mA h g−1 at 0.5C and outstanding rate capability. In addition, a high capacity of 410 mA h g−1 can still be achieved after 500 cycles with a very low capacity decay rate of 0.064% per cycle.
- 4 July 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (30) , 14734-14741
Engineering the nanostructure of molybdenum nitride nanodot embedded N-doped porous hollow carbon nanochains for rapid all pH hydrogen evolution
Engineering the microstructure at the atomic scale is paramount to developing effective catalysts due to the active sites and mass/charge transfer ability of catalysts severely limited by their microstructure. Herein, we nanoengineer unique necklace-like nanochains composed of molybdenum nitride embedded N-doped carbon, in which the series-wound nanochains are built from hollow beads with a very thin porous wall. MoN nanodots were downsized to 3 nm and uniformly embedded in hollow N-doped porous carbon pearls and wires. The unique hierarchical hollow cavity and ultrathin wall structure of the nanochains offer a high effective reaction chamber, more active sites, and mass/charge transfer for remarkably fast HER. The resultant MoN@NPCNCs exhibit an extremely low HER overpotential of 72 mV at 10 mA cm−2, a low Tafel slope of 53.21 mV dec−1 in an acidic solution, which is far lower than those of MoN embedded N-doped carbon nanofibers (MoN@NPCNFs, 139.21 mV vs. RHE/82.69 mV dec−1), and other previously reported MoN based catalysts. Density functional theory (DFT) calculations reveal that MoN and N-doped carbon synergistically optimizes the free energy of hydrogen adsorption on the active sites. Furthermore, this catalyst also offers an excellent electrocatalytic ability and durability in both neutral and alkaline media.
- 4 July 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (30) , 14734-14741
Engineering the nanostructure of molybdenum nitride nanodot embedded N-doped porous hollow carbon nanochains for rapid all pH hydrogen evolution
Engineering the microstructure at the atomic scale is paramount to developing effective catalysts due to the active sites and mass/charge transfer ability of catalysts severely limited by their microstructure. Herein, we nanoengineer unique necklace-like nanochains composed of molybdenum nitride embedded N-doped carbon, in which the series-wound nanochains are built from hollow beads with a very thin porous wall. MoN nanodots were downsized to 3 nm and uniformly embedded in hollow N-doped porous carbon pearls and wires. The unique hierarchical hollow cavity and ultrathin wall structure of the nanochains offer a high effective reaction chamber, more active sites, and mass/charge transfer for remarkably fast HER. The resultant MoN@NPCNCs exhibit an extremely low HER overpotential of 72 mV at 10 mA cm−2, a low Tafel slope of 53.21 mV dec−1 in an acidic solution, which is far lower than those of MoN embedded N-doped carbon nanofibers (MoN@NPCNFs, 139.21 mV vs. RHE/82.69 mV dec−1), and other previously reported MoN based catalysts. Density functional theory (DFT) calculations reveal that MoN and N-doped carbon synergistically optimizes the free energy of hydrogen adsorption on the active sites. Furthermore, this catalyst also offers an excellent electrocatalytic ability and durability in both neutral and alkaline media.
- 1 February 2018
- Published by Wiley in Advanced Functional Materials
- Vol. 28 (14)
Honeycomb‐Like Spherical Cathode Host Constructed from Hollow Metallic and Polar Co9S8 Tubules for Advanced Lithium–Sulfur Batteries
The practical application of lithium‐sulfur (Li‐S) batteries remains remote because of rapid capacity fade caused by the low conductivity of sulfur, dissolution of intermediate lithium polysulfides, severe volumetric expansion, and slow redox kinetics of polysulfide intermediates. Here, to address these obstacles, a new sulfiphilic and highly conductive honeycomb‐like spherical cathode host constructed from hollow metallic and polar Co9S8 tubes is designed. Co9S8 can effectively bind polar polysulfides for prolonged cycle life, due to the strong chemisorptive capability for immobilizing the polysulfide species. The hollow structure, as the sulfur host, can further prevent polysulfide dissolution and offer sufficient space to accommodate the necessary volume expansion. Well‐aligned tubular arrays provide a conduit for rapid conduction of electrons and Li‐ions. More importantly, the experimental results and theoretical calculations show that Co9S8 plays an important catalytic role in improving the electrochemical reaction kinetics. When used as cathode materials for Li–S batteries, the S@Co9S8 composite cathode exhibits high capacity and an exceptional stable cycling life demonstrated by tests of 600 cycles at 1 C with a very low capacity decay rate of only ≈0.026% per cycle.
- 1 February 2018
- Published by Wiley in Advanced Functional Materials
- Vol. 28 (14)
Honeycomb‐Like Spherical Cathode Host Constructed from Hollow Metallic and Polar Co9S8 Tubules for Advanced Lithium–Sulfur Batteries
The practical application of lithium‐sulfur (Li‐S) batteries remains remote because of rapid capacity fade caused by the low conductivity of sulfur, dissolution of intermediate lithium polysulfides, severe volumetric expansion, and slow redox kinetics of polysulfide intermediates. Here, to address these obstacles, a new sulfiphilic and highly conductive honeycomb‐like spherical cathode host constructed from hollow metallic and polar Co9S8 tubes is designed. Co9S8 can effectively bind polar polysulfides for prolonged cycle life, due to the strong chemisorptive capability for immobilizing the polysulfide species. The hollow structure, as the sulfur host, can further prevent polysulfide dissolution and offer sufficient space to accommodate the necessary volume expansion. Well‐aligned tubular arrays provide a conduit for rapid conduction of electrons and Li‐ions. More importantly, the experimental results and theoretical calculations show that Co9S8 plays an important catalytic role in improving the electrochemical reaction kinetics. When used as cathode materials for Li–S batteries, the S@Co9S8 composite cathode exhibits high capacity and an exceptional stable cycling life demonstrated by tests of 600 cycles at 1 C with a very low capacity decay rate of only ≈0.026% per cycle.
- Open Access
- 6 November 2017
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 9 (3) , 666-675
A highly efficient double-hierarchical sulfur host for advanced lithium–sulfur batteries
A double-hierarchical sulfur host has been synthesized in which hierarchical carbon spheres, constructed from building blocks of hollow carbon nanobubbles used for loading sulfur, are sealed by a polar MoS2 coating that is composed of ultrathin nanosheets (MoS2@HCS composite).
- 6 November 2017
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 9 (3) , 666-675
Open AccessA highly efficient double-hierarchical sulfur host for advanced lithium–sulfur batteries
A double-hierarchical sulfur host has been synthesized in which hierarchical carbon spheres, constructed from building blocks of hollow carbon nanobubbles used for loading sulfur, are sealed by a polar MoS2 coating that is composed of ultrathin nanosheets (MoS2@HCS composite).