Mariana A. Moreira
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mariana A. Moreira has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Alexandre Filipe Porfírio Ferreira
LSRE-LCM, ALiCE, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
10 shared publications - Alirio Egidio Rodrigues
LSRE‐LCM, ALiCE, Faculty of Engineering University of Porto Porto Portugal
9 shared publications - Jose Miguel Loureiro
Laboratory of Separation and Reaction Engineering, Associate Laboratory LSRE/LCM, Department of Chemical Engineering, Faculty of Engineering, University of Porto, 4200-465 Porto, Portugal
6 shared publications - Christian Serre
Institut des Matériaux Poreux de Paris, Ecole Normale Supérieure, ESPCI Paris, CNRS, PSL University, 75005, Paris, France
4 shared publications João C. Santos
Universidade do Porto, Faculdade de Engenharia, LSRE Laboratory of Separation and Reaction Engineering , Porto, Portugal
3 shared publications- Patricia Horcajada
Advanced Porous Materials Unit, IMDEA Energy Institute, Av. Ramón de la Sagra 3, 28935 Móstoles, Spain
3 shared publications
Latest Publications
- 10 April 2019
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 64 (11) , 4724-4732
Adsorption Equilibrium of Carbon Dioxide, Methane, Nitrogen, Carbon Monoxide, and Hydrogen on UiO-66(Zr)_(COOH)2
- 10 April 2019
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 64 (11) , 4724-4732
Adsorption Equilibrium of Carbon Dioxide, Methane, Nitrogen, Carbon Monoxide, and Hydrogen on UiO-66(Zr)_(COOH)2
- 27 September 2018
- Published by Springer Nature in Adsorption
- Vol. 24 (8) , 715-724
Adsorption equilibrium of xylene isomers and ethylbenzene on MIL-125(Ti)_NH2: the temperature influence on the para-selectivity
- 27 September 2018
- Published by Springer Nature in Adsorption
- Vol. 24 (8) , 715-724
Adsorption equilibrium of xylene isomers and ethylbenzene on MIL-125(Ti)_NH2: the temperature influence on the para-selectivity
- 1 February 2017
- Published by Elsevier in Separation and Purification Technology
- Vol. 173, 339-356
Cryogenic pressure temperature swing adsorption process for natural gas upgrade
- 1 February 2017
- Published by Elsevier in Separation and Purification Technology
- Vol. 173, 339-356
Cryogenic pressure temperature swing adsorption process for natural gas upgrade
- 6 August 2014
- Published by Wiley in Chemical Engineering & Technology
- Vol. 37 (9) , 1483-1492
Hybrid Process for o‐ and p‐Xylene Production in Aromatics Plants
- 6 August 2014
- Published by Wiley in Chemical Engineering & Technology
- Vol. 37 (9) , 1483-1492
Hybrid Process for o‐ and p‐Xylene Production in Aromatics Plants
- 25 September 2012
- Published by Wiley in Chemical Engineering & Technology
- Vol. 35 (10) , 1777-1785
Adsorbent Evaluation Based on Experimental Breakthrough Curves: Separation of p‐Xylene from C8 Isomers
The search for new adsorbents with enhanced capacity and selectivity, suitable for application on large‐scale simulated moving‐bed units for separation of p‐xylene, requires efficient, reliable, and fast adsorbent characterization methods for this specific separation. Fixed‐bed experiments were carried out under the conditions of the Parex process to evaluate a faujasite‐type zeolite as adsorbent for the separation of p‐xylene from its isomers in the proportions of the real Parex feed stream. The experimental breakthrough curves were used to evaluate the selected adsorbent in terms of nonselective and selective volumes, adsorption capacity, selectivity, and productivity, which can be applied to identify the feasible separation region for different operating conditions.
- 25 September 2012
- Published by Wiley in Chemical Engineering & Technology
- Vol. 35 (10) , 1777-1785
Adsorbent Evaluation Based on Experimental Breakthrough Curves: Separation of p‐Xylene from C8 Isomers
The search for new adsorbents with enhanced capacity and selectivity, suitable for application on large‐scale simulated moving‐bed units for separation of p‐xylene, requires efficient, reliable, and fast adsorbent characterization methods for this specific separation. Fixed‐bed experiments were carried out under the conditions of the Parex process to evaluate a faujasite‐type zeolite as adsorbent for the separation of p‐xylene from its isomers in the proportions of the real Parex feed stream. The experimental breakthrough curves were used to evaluate the selected adsorbent in terms of nonselective and selective volumes, adsorption capacity, selectivity, and productivity, which can be applied to identify the feasible separation region for different operating conditions.
- 1 August 2012
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 158, 229-234
Effect of ethylbenzene in p-xylene selectivity of the porous titanium amino terephthalate MIL-125(Ti)_NH2
- 1 August 2012
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 158, 229-234
Effect of ethylbenzene in p-xylene selectivity of the porous titanium amino terephthalate MIL-125(Ti)_NH2
- 22 March 2012
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 28 (13) , 5715-5723
Reverse Shape Selectivity in the Liquid-Phase Adsorption of Xylene Isomers in Zirconium Terephthalate MOF UiO-66
Powder, agglomerates, and tablets of the microporous zirconium(IV) terephthalate metal–organic framework UiO-66 were evaluated for the selective adsorption and separation of xylene isomers in the liquid phase using n-heptane as the eluent. Pulse experiments, performed at 313 K in the presence of n-heptane, revealed the o-xylene preference of this material, which was further confirmed by binary and multicomponent breakthrough experiments in the presence of m- and p-xylene, resulting in selectivities at 313 K of 1.8 and 2.4 with regards to m-xylene and p-xylene, respectively. Additionally, because p-xylene is the less retained isomer, UiO-66 presents a selectivity pattern that is reverse of that of the xylenes' molecular dimension with respect to shape selectivity. The shaping of the material as tablets did not significantly change its selectivity toward the o-xylene isomer or toward p-xylene, which was the less retained isomer, despite a loss in capacity. Finally, the selectivity behavior of UiO-66 in the liquid n-heptane phase makes it a suitable material for o-xylene separation in the extract (heavy product) or p-xylene separation in the raffinate (light product) by simulated moving bed technology.
- 22 March 2012
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 28 (13) , 5715-5723
Reverse Shape Selectivity in the Liquid-Phase Adsorption of Xylene Isomers in Zirconium Terephthalate MOF UiO-66
Powder, agglomerates, and tablets of the microporous zirconium(IV) terephthalate metal–organic framework UiO-66 were evaluated for the selective adsorption and separation of xylene isomers in the liquid phase using n-heptane as the eluent. Pulse experiments, performed at 313 K in the presence of n-heptane, revealed the o-xylene preference of this material, which was further confirmed by binary and multicomponent breakthrough experiments in the presence of m- and p-xylene, resulting in selectivities at 313 K of 1.8 and 2.4 with regards to m-xylene and p-xylene, respectively. Additionally, because p-xylene is the less retained isomer, UiO-66 presents a selectivity pattern that is reverse of that of the xylenes' molecular dimension with respect to shape selectivity. The shaping of the material as tablets did not significantly change its selectivity toward the o-xylene isomer or toward p-xylene, which was the less retained isomer, despite a loss in capacity. Finally, the selectivity behavior of UiO-66 in the liquid n-heptane phase makes it a suitable material for o-xylene separation in the extract (heavy product) or p-xylene separation in the raffinate (light product) by simulated moving bed technology.
- 6 February 2012
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 28 (7) , 3494-3502
Toward Understanding the Influence of Ethylbenzene in p-Xylene Selectivity of the Porous Titanium Amino Terephthalate MIL-125(Ti): Adsorption Equilibrium and Separation of Xylene Isomers
The potential of the porous crystalline titanium dicarboxylate MIL-125(Ti) in powder form was studied for the separation in liquid phase of xylene isomers and ethylbenzene (MIL stands for Materials from Institut Lavoisier). We report here a detailed experimental study consisting of binary and multi-component adsorption equilibrium of xylene isomers in MIL-125(Ti) powder at low (≤0.8 M) and bulk (≥0.8 M) concentrations. A series of multi-component breakthrough experiments was first performed using n-heptane as the eluent at 313 K, and the obtained selectivities were compared, followed by binary breakthrough experiments to determine the adsorption isotherms at 313 K, using n-heptane as the eluent. MIL-125(Ti) is a para-selective material suitable at low concentrations to separate p-xylene from the other xylene isomers. Pulse experiments indicate a separation factor of 1.3 for p-xylene over o-xylene and m-xylene, while breakthrough experiments using a diluted ternary mixture lead to selectivity values of 1.5 and 1.6 for p-xylene over m-xylene and o-xylene, respectively. Introduction of ethylbenzene in the mixture results however in a decrease of the selectivity.
- 6 February 2012
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 28 (7) , 3494-3502
Toward Understanding the Influence of Ethylbenzene in p-Xylene Selectivity of the Porous Titanium Amino Terephthalate MIL-125(Ti): Adsorption Equilibrium and Separation of Xylene Isomers
The potential of the porous crystalline titanium dicarboxylate MIL-125(Ti) in powder form was studied for the separation in liquid phase of xylene isomers and ethylbenzene (MIL stands for Materials from Institut Lavoisier). We report here a detailed experimental study consisting of binary and multi-component adsorption equilibrium of xylene isomers in MIL-125(Ti) powder at low (≤0.8 M) and bulk (≥0.8 M) concentrations. A series of multi-component breakthrough experiments was first performed using n-heptane as the eluent at 313 K, and the obtained selectivities were compared, followed by binary breakthrough experiments to determine the adsorption isotherms at 313 K, using n-heptane as the eluent. MIL-125(Ti) is a para-selective material suitable at low concentrations to separate p-xylene from the other xylene isomers. Pulse experiments indicate a separation factor of 1.3 for p-xylene over o-xylene and m-xylene, while breakthrough experiments using a diluted ternary mixture lead to selectivity values of 1.5 and 1.6 for p-xylene over m-xylene and o-xylene, respectively. Introduction of ethylbenzene in the mixture results however in a decrease of the selectivity.
- 1 August 2011
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 46 (13) , 1995-2003
Selective Liquid Phase Adsorption and Separation ofortho-Xylene with the Microporous MIL-53(Al)
Metal-organic framework MIL-53(Al) pellets were tested for the selective adsorption and separation of xylene isomers, in liquid phase and using n-heptane as eluent. The objective of this work is to assess relevant data for a posterior xylene isomers separation process design. In order to complete this study, single and multi-component breakthrough experiments were performed at 313 K, in the presence of n-heptane. MIL-53(Al) presented a preference for o-xylene over m-xylene and p-xylene in all experiments. The selectivities of 2.0 were obtained for o-xylene over m-xylene and over p-xylene. It is concluded that MIL-53(Al) may be used for separating o-xylene from the other xylene isomers, using n-heptane as desorbent. Supplemental materials are available for this article. Go to the publisher's online edition of Separation Science & Technology to view the free supplemental file.
- 1 August 2011
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 46 (13) , 1995-2003
Selective Liquid Phase Adsorption and Separation ofortho-Xylene with the Microporous MIL-53(Al)
Metal-organic framework MIL-53(Al) pellets were tested for the selective adsorption and separation of xylene isomers, in liquid phase and using n-heptane as eluent. The objective of this work is to assess relevant data for a posterior xylene isomers separation process design. In order to complete this study, single and multi-component breakthrough experiments were performed at 313 K, in the presence of n-heptane. MIL-53(Al) presented a preference for o-xylene over m-xylene and p-xylene in all experiments. The selectivities of 2.0 were obtained for o-xylene over m-xylene and over p-xylene. It is concluded that MIL-53(Al) may be used for separating o-xylene from the other xylene isomers, using n-heptane as desorbent. Supplemental materials are available for this article. Go to the publisher's online edition of Separation Science & Technology to view the free supplemental file.
- 13 May 2011
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 50 (12) , 7688-7695
Influence of the Eluent in the MIL-53(Al) Selectivity for Xylene Isomers Separation
- 13 May 2011
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 50 (12) , 7688-7695
Influence of the Eluent in the MIL-53(Al) Selectivity for Xylene Isomers Separation