WKWade H. Kress

Wade H. Kress

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wade H. Kress has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Altitude of the Potentiometric Surface and Depth to Water in the Mississippi River Valley Alluvial Aquifer, Spring 2024

    by Virginia L. McGuire, Kellan R. Strauch, Erik A. Wojtylko, William H. Asquith, Anna M. Nottmeier, Judith C. Thomas, Roland W. Tollett, Wade H. Kress

    Potentiometric-surface and depth-to-water maps for spring 2024 were created for the Mississippi River Valley alluvial aquifer using groundwater-altitude data from 1,151 wells completed in the Mississippi River Valley alluvial aquifer and from the altitude of the top of the water surface in area rivers from 160 U.S. Geological Survey and U.S. Army Corps of Engineers streamgages. The potentiometric-surface and depth-to-water maps for 2024 were created to support investigations to characterize the Mississippi River Valley alluvial aquifer as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the Mississippi River Valley alluvial aquifer for spring 2024 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 330 feet (ft) above the North American Vertical Datum of 1988. The regional direction of the groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient direction was into the depression, and near rivers, where the groundwater gradient direction was either from the aquifer to the river or from the river into the aquifer. Groundwater depressions in the potentiometric-surface map are in the lower one-half of the Cache region and in most of the Grand Prairie and Delta regions. Depth to water by well in the Mississippi River Valley alluvial aquifer in spring 2024 ranged from 0.27 ft above land surface to 145.65 ft below land surface.

  • Airborne geophysical analysis to decipher salinization for coastal Louisiana

    by Michael Attia, Frank T.-C. Tsai, Shuo Yang, Burke J. Minsley, Wade H. Kress


  • Open Access

    Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2022

    by Virginia L. McGuire, Kellan R. Strauch, Erik A. Wojtylko, William H. Asquith, Anna M. Nottmeier, Judith C. Thomas, Roland W. Tollett, Wade H. Kress

    Potentiometric-surface and depth-to-water maps for spring 2022 were created for the Mississippi River Valley alluvial aquifer (MRVA) using groundwater-altitude data from 1,136 wells completed in the MRVA and from the altitude of the top of the water surface in area rivers from 160 streamgages. The potentiometric-surface and depth-to-water maps for 2022 were created to support investigations to characterize the MRVA as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the MRVA for spring 2022 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 340 feet (ft) above the North American Vertical Datum of 1988. The regional direction of groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient was into the depression, and near rivers, where the groundwater gradient can be from aquifer to the river or from the river into the aquifer. There are large depressions in the potentiometric-surface map in the lower one-half of the Cache region and in much of the Grand Prairie and Delta regions. Depth to water in the MRVA, spring 2022, by well ranged from 5.00 ft above land surface to 145.66 ft below land surface.

  • Open Access

    A model of transmissivity and hydraulic conductivity from electrical resistivity distribution derived from airborne electromagnetic surveys of the Mississippi River Valley Alluvial Aquifer, Midwest USA

    by Scott J. Ikard, Burke J. Minsley, James R. Rigby, Wade H. Kress

    Groundwater-flow models require the spatial distribution of the hydraulic conductivity parameter. One approach to defining this spatial distribution in groundwater-flow model grids is to map the electrical resistivity distribution by airborne electromagnetic (AEM) survey and establish a petrophysical relation between mean resistivity calculated as a nonlinear function of the resistivity layering and thicknesses of the layers and aquifer transmissivity compiled from historical aquifer tests completed within the AEM survey area. The petrophysical relation is used to transform AEM resistivity to transmissivity and to hydraulic conductivity over areas where the saturated thickness of the aquifer is known. The US Geological Survey applied this approach to a gain better understanding of the aquifer properties of the Mississippi River Valley alluvial aquifer. Alluvial-aquifer transmissivity data, compiled from 160 historical aquifer tests in the Mississippi Alluvial Plain (MAP), were correlated to mean resistivity calculated from 16,816 line-kilometers (km) of inverted resistivity soundings produced from a frequency-domain AEM survey of 95,000 km2 of the MAP. Correlated data were used to define petrophysical relations between transmissivity and mean resistivity by omitting from the correlations the aquifer-test and AEM sounding data that were separated by distances greater than 1 km and manually calibrating the relation coefficients to slug-test data. The petrophysical relation yielding the minimum residual error between simulated and slug-test data was applied to 2,364 line-km of AEM soundings in the 1,000-km2 Shellmound (Mississippi) study area to calculate hydraulic property distributions of the alluvial aquifer for use in future groundwater-flow models.


  • Estimating streambed hydraulic conductivity for selected streams in the Mississippi Alluvial Plain using continuous resistivity profiling methods—Delta region

    by Ryan F. Adams, Benjamin Miller, Wade H. Kress, Burke J. Minsley, James R. Rigby

    The Mississippi Alluvial Plain is one of the most important agricultural regions in the United States, and crop productivity relies on groundwater irrigation from an aquifer system whose full capacity is unknown. Groundwater withdrawals from the Mississippi River Valley alluvial aquifer have resulted in substantial groundwater-level declines and reductions in base flow in streams within the Mississippi Alluvial Plain. These effects are limiting well production and threatening future water availability in the region.A comprehensive assessment of water availability in the Mississippi Alluvial Plain is critically important for making well-informed management decisions about sustainability, establishing best practices for water use, and predicting changes to water levels in the Mississippi Alluvial Plain over the next 50–100 years. The first step in the new regional modeling effort was to run the existing Mississippi Embayment Regional Aquifer Study (MERAS) model and perform data-worth and uncertainty analyses to prioritize data collection efforts to improve model forecasts. Parameter estimation indicated that streambed conductance was one of the variables that the model was most sensitive to, but little data were available to constrain those general estimates.From this characterization of the existing data, a map of the streams that the MERAS model was most sensitive to was created by the U.S. Geological Survey to guide the collection of 862 kilometers of waterborne resistivity surveys within the Delta region of Mississippi to characterize streambed lithology. This technique characterizes the streambed itself and the 15–30 meters below the streambed that control the exchange of water between the stream and the alluvial aquifer. These data can be used to map changes in the lithology of the streambed and identify areas of potential groundwater/surface-water exchange. Additionally, electrical and nuclear well logs from the study area were compared to facilitate the development of a petrophysical relation between the waterborne resistivity data and hydraulic conductivity. Resistivity values may then be used as a cost-effective way to approximate aquifer hydraulic conductivity distributions for use in regional groundwater models.

  • Open Access

    Simulation of monthly mean and monthly base flow of streamflow using random forests for the Mississippi River Alluvial Plain, 1901 to 2018

    by Benjamin J. Dietsch, William H. Asquith, Brian K. Breaker, Stephen M. Westenbroek, Wade H. Kress

    Improved simulations of streamflow and base flow for selected sites within and adjacent to the Mississippi River Alluvial Plain area are important for modeling groundwater flow because surface-water flows have a substantial effect on groundwater levels. One method for simulating streamflow and base flow, random forest (RF) models, was developed from the data at gaged sites and, in turn, was used to make monthly mean streamflow and base-flow predictions at 162 ungaged sites in the study area. Daily streamflow observations and computed base flow from 247 streamgages were used as the basis for the development of these RF models. RF models were constructed from basin and climatic characteristics and related to observed monthly mean streamflow values; models were used to compute monthly base-flow estimates from selected streamgages in and adjacent to the Mississippi River Alluvial Plain extent, which includes streamflows from parts of Alabama, Arkansas, Colorado, Florida, Illinois, Indiana, Kansas, Kentucky, Louisiana, Mississippi, Missouri, New Mexico, Tennessee, and Texas. The explanatory variables for the models were selected to represent physical characteristics and climatic time series for the contributing drainage basins to the streamgages and ungaged locations of interest. The Nash-Sutcliffe efficiency between observed and simulated monthly mean streamflow was greater than 0.80 for 155 of the 247 streamgages, with a median Nash-Sutcliffe efficiency value of 0.83. The streamflow and base-flow simulations can be used to improve inflow values and to verify the Mississippi River Alluvial Plain groundwater flow model. The statistical model, input data, and response data (simulated monthly mean streamflows) are available as a U.S. Geological Survey software release and a U.S. Geological Survey data release.


  • Evaluation of Electrical and Electromagnetic Geophysical Techniques to Inspect Earthen Dam and Levee Structures in Arkansas

    by Ryan F. Adams, Benjamin V. Miller, Wade H. Kress, Scott J. Ikard, Jason D. Payne, Walter H. Killion

    Within the State of Arkansas, there is an increasing number of aging dams and levees that have little to no documentation concerning their construction or composition. Surface geophysical surveys offer a non-intrusive method for investigating these structures to describe their lithologic makeup, evaluate the materials constructed upon, and identify potential flow paths through them. Techniques such as electrical resistivity tomography, seismic refraction, and electromagnetic induction have been used to image dams and levees. They require additional information from geologic outcrops, geotechnical borings, or drill cores to make informed geologic interpretations of the geophysical models. These geologic models then allow the owners of these structures to make more informed decisions about their operation and maintenance. Between 2011 and 2018, the U.S. Geological Survey conducted geophysical and geotechnical investigations of three earthen structures in Arkansas. Electrical and electromagnetic geophysical data were used to develop lithologic models of these structures and characterize the underlying geology. Self-potential surveys were utilized to detect the movement of water through these structures and identify any possible seepage pathways. Geotechnical methods such as electric and hydraulic direct-push well logs and cores acted as a control on the geophysical interpretations and a confirmation of anomalies. This integrated approach detected the lack of an impermeable core within a levee, imaged a change in lithology of the bedrock forming the seal beneath a gravity dam, and identified a potential seepage feature within the core of an earthen dam. These results further support that this method of extending known lithologic features via surface and borehole geophysics is a useful approach for characterizing earthen water-control structures.


  • Open Access

    Closing a scale-gap in Earth observation using regional-scale airborne geophysics in the lower Mississippi Valley

    by Burke Minsley, James Rigby, Stephanie James, Bethany Burton, Katherine Knierim, Michael Pace, Paul Bedrosian, Wade Kress

    Critical groundwater resources and hidden seismic hazards underly much of the Mississippi Alluvial Plain. Spanning nearly 100,000 square kilometers across seven states, this region hosts one of the most prolific shallow aquifer systems in the United States that supports a $12 billion agricultural economy amidst chronic groundwater decline. Further, underlying fault structures of the Reelfoot Rift and New Madrid Seismic Zone represent an important and poorly understood hazard with a complex pattern of historical impacts. Despite its societal and economic importance, mapping of shallow subsurface architecture with spatial resolution needed for effective management is insufficient. Here, we report the results of 40,000 flight-line-kilometers of electromagnetic, magnetic, and radiometric data collectively providing a system-scale snapshot of an entire aquifer system, the first such effort in the United States. This survey enables new understanding of the regional hydrogeology while also revealing previously unseen large vertical displacements (exceeding 50 m) in the uppermost Tertiary units within the New Madrid Seismic Zone.

  • Open Access

    Altitude of the potentiometric surface in the Mississippi River Valley alluvial aquifer, spring 2020

    by Virginia L. McGuire, Ronald C. Seanor, William H. Asquith, Kellan R. Strauch, Anna M. Nottmeier, Judith C. Thomas, Roland W. Tollett, Wade H. Kress

    The purpose of this report is to present a potentiometric-surface map for the Mississippi River Valley alluvial aquifer (MRVA). The source data for the map were groundwater-altitude data from wells measured manually or continuously generally in spring 2020 and from the altitude of the top of the water surface measured generally on April 9, 2020, in rivers in the area.


  • Open Access

    Altitude of the potentiometric surface in the Mississippi River Valley alluvial aquifer, spring 2018

    by Virginia L. McGuire, Ronald C. Seanor, William H. Asquith, Anna M. Nottmeier, David C. Smith, Roland W. Tollett, Wade H. Kress, Kellan R. Strauch

    A potentiometric-surface map for spring 2018 was created for the Mississippi River Valley alluvial (MRVA) aquifer using available groundwater-altitude data from 1,126 wells completed in the MRVA aquifer and from the altitude of the top of the water surface in area rivers from 66 streamgages. Personnel from Arkansas Natural Resources Commission, Arkansas Department of Health, Arkansas Geological Survey, Illinois Department of Agriculture, Illinois State Water Survey, Louisiana Department of Natural Resources, Louisiana Department of Transportation and Development, Mississippi Department of Environmental Quality, Missouri Department of Natural Resources, Yazoo Mississippi Delta Joint Water Management District, U.S. Department of Agriculture-Natural Resources Conservation Service, and U.S. Geological Survey (USGS) routinely collect groundwater-level data from wells screened in the MRVA aquifer. The USGS and the U.S. Army Corps of Engineers routinely collect data on river stage and streamflow for the rivers overlying the MRVA aquifer area. The potentiometric-surface map for 2018 was created utilizing existing groundwater and surface-water altitudes to support investigations to characterize the MRVA aquifer as part of the USGS Water Availability and Use Science Program.Sufficient data were available to map the potentiometric surface of the MRVA aquifer for spring 2018 for about 87 percent of the aquifer area. The potentiometric contours ranged from 10 to 340 feet above North American Vertical Datum of 1988. The regional direction of groundwater flow was generally to the south-southwest, except in areas of groundwater-altitude depressions, where groundwater flowed into the depression, and near rivers, where flow can be from aquifer to the river or from the river into the aquifer. There are large depressions in the potentiometric-surface map in the lower one-half of the Cache region and in most of the Grand Prairie and Delta regions.