MTMladen Tomic

Mladen Tomic

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mladen Tomic has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Analysis of NO X emissions and optimizing efficiency of converted GAS-FIRED steam boilers

    by Nenad A. Tomić, Anđelković S. Aleksandar, Mladen A. Tomić, Miroslav V. Kljajić, Borivoj Lj. Stepanov, Predrag M. Živković, Drago K. Sever

  • Open Access

    Determining gas and gas mixture viscosity across wide temperature ranges: Refinements and predictive models

    by Jovica Podunavac, Nenad Tomić, Mladen Tomić, Aleksandar Anđelković, Miroslav Kljajić, Predrag Živković

    This study delves into refining the ideal gas viscosity equation by introducing amendments that account for temperature variations and critical temperature ratios across diverse ideal gases. The investigation involves comparing the adjusted formula with empirical data obtained from various gases under extreme conditions, including ultra-critical temperatures and near-critical points like for water and carbon dioxide. The primary objective is to enhance the equation's accuracy and applicability. The research proposes novel modifications integrating a temperature-dependent dumping coefficient and a redefined temperature exponent. These adjustments aim to capture gas behavior across a wider spectrum of temperatures, pressures, and gas compositions. Building upon foundational works in gas dynamics and molecular theory, this study bridges the gap between theoretical formulations and empirical observations. To validate these modifications, empirical data from gases under diverse conditions, including ultra-critical temperatures and mixtures, were utilized. Notably, the study's focus extends to analyzing gases under extreme conditions, highlighting the formula's improved predictive capability, and assessing its performance against complex gas mixtures using software-generated data. The findings reveal that these proposed adjustments significantly enhance the equation's alignment with real-world observations. Specifically, the analysis showcases improved predictive accuracy, especially in extreme gas conditions, and promising results when evaluating complex gas mixtures. These modifications offer a more comprehensive framework for estimating viscosity across a broad range of gas types and conditions, thereby enhancing the predictive power of the ideal gas viscosity equation.

  • Open Access

    Optimizing flue gas recirculation for enhanced efficiency in biomass-fired boilers: A comprehensive study

    by Nenad Tomić, Jovica Podunavac, Mladen Tomić, Aleksandar Anđelković, Miroslav Kljajić, Predrag Živković

    As sustainable energy practices become more popular, biomass-fired boilers are becoming a choice over traditional fossil fuel models due to their eco-friendly nature. Despite their environmental advantages, biomass boilers still emit pollutants like particulate matter (PM), sulfur dioxide (SO2), nitrogen oxides (NOX), and carbon monoxide (CO), posing environmental concerns. To mitigate these emissions, modern biomass-fired boilers often incorporate Flue Gas Recirculation (FGR). This research focuses on a 14 MW biomass-fired boiler operating with a 20% FGR rate, examining three scenarios: two with varying FGR levels and one without FGR. The analysis reveals a connection between emission reduction via FGR and boiler efficiency maintenance. Additionally, it suggests optimizing FGR levels to boost boiler efficiency. The study presents a comprehensive approach to effectively implement FGR in biomass-fired boilers while ensuring acceptable efficiency levels. NOX emissions were analyzed using combustion simulation software and the Zeldovich method to estimate thermal NOX production.


  • Environmental impact assessment of the electric vehicles: A case study

    by Aleksandar V. Manojlović, Olivera M. Medar, Aleksandar S. Anđelković, Mladen A. Tomić

    Most of the air pollution originates from combustion processes, where traffic is one of the most important sources. Thus, road traffic’s contribution to pollution and overall emissions is very important. One of the popular methods for reducing pollution in urban areas is the introduction of electric vehicles (EV), and this is the main reason why fully electric vehicles, as an alternative to conventional fossil fuel vehicles, are becoming more popular. Although EVs emit no tailpipe pollutants, the power plants in national grid systems may emit them. This is the case with coal-based energy systems, like the one in the Republic of Serbia. In this study, the analysis of direct and indirect emissions of CO2 and NOX from ICE and EV is presented. The analysis has shown that the average specific emission factor for EVs, if charged in Serbia, is almost the same in terms of CO2 with 194.7 g/km in comparison with 159.6 g/km, while in the case of NOX, the specific emissions factors for EV almost doubles, from 0.71 to 1.30 g/km. Further analyses have shown that decarbonizing the national power grid to reduce the complete replacement of the fleet with EVs for achieving net zero emissions requires all the available solar, wind, and hydropower resources of the Republic of Serbia. On the other hand, EVs could be used as battery storage for discontinuous energy sources covering the needs of over 25% of a personal vehicle fleet.


  • Open Access

    Experimental and numerical investigation of Rayleigh-Benard convection in rectangular cavity with motor oil

    by Predrag Zivkovic, Mladen Tomic, Sadoon Ayed, Cristian Barz, Drago Sever

    Naturally flows have been the scope of the scientific research for centuries, Rayleigh-Bénard convection being one of the leading. Many researchers have considered the flow patterns, boundary conditions, various cavities, nanofluids, theoretically, numerically, experimentally. The flow was investigated in atmosphere and in nano fluids, in air, water, molten metals, non - Newtonian fluids. Almost all research focuses on 2 or 3 - dimensional analysis of flow in laterally unlimited enclosures, as parallel plates or coaxial cylinders. In technical practice, only limited enclosures exist. This paper presents numerical and real experimental results for the test chamber with ratio 4×2×1 in x, y and z direction, respectfully. The measurements were taken at fifteen different positions on the faces of the tank. Probes used are PT100 elements. As the chamber is limited in all directions, the results have shown strong influence of the lateral walls. The results are compared with the those obtained by IR camera. Various fluids were tested, and results for motor oil will be presented.

  • Open Access

    Investigation of air-cooled condenser’s operating parameters in modern thermal power plant

    by Jovan B. Škundrić, Predrag M. Živković, Milan M. Tica, Mladen A. Tomić, Christian P. Barz

    Air-cooled condensers in thermal power plants have recently become increasingly popular. Besides all the advantages they have, like no demands for water supply on the plant site and no need for taking care of environmental regulations, they also have some serious disadvantages. One of the biggest disadvantages air-cooled condensers do have is precisely the nature of the Earth?s atmosphere being their low temperature reservoir. Low density and low heat capacity of the air as the cooling medium combined with extremely stochastic behavior of the atmosphere itself put some serious challenges in front of the air-cooled condenser?s proper and steady functioning. In this paper, the operating parameters of the air-cooled condenser in the chosen thermal power plant were investigated to gain a clearer insight into the influence of the atmospheric changes on its entropy generation and consequently on its efficiency. Also, the acquired results were further proposed as a starting point for potential optimization of the process inside the device.


  • Application Of Kohonen Self-Organizing Maps for Mapping Energy Sustainability - Focus On Serbia

    by Zeljko Vlaovic, Borivoj Stepanov, Aleksandar Andelkovic, Vladimir Rajs, Zoran Cepic, Mladen Tomic

    A Kohonen Self-organizing maps are an artificial neural network that is trained using unsupervised learning to produce a two-dimensional map. Self-organizing maps were once used for creating World poverty map on the eve of breakdown of Yugoslavia. This map compared 39 indicators for quality of life in 126 countries. Yugoslavia mapped close to the most developed countries. This paper uses the same methodology to present level of energy sustainability of Serbia by its comparison with selected countries, from Nordic ones, through World powers, in total 26 countries. From International Energy Agencys Atlas of energy 19 indicators were chosen, some adjusted for creating the Self-organizing map, where lower values are defined as energy sustainable ones. Mapping the countries itself shows the closeness to energy sustain ability champions. Also maps offer possibility to identify clusters of countries with similar energy policies. Seven clusters were identified based on four lights energy sustainability semaphore. Cluster contains at least three matches in selected parameters. Position in a low energy sustainable region of the map is an impetus to adjust energy policy.


  • Open Access

    Building Energy Performance Certificate—A Relevant Indicator of Actual Energy Consumption and Savings?

    by Aleksandar S. Anđelković, Miroslav Kljajić, Dušan Macura, Vladimir Munćan, Igor Mujan, Mladen Tomić, Željko Vlaović, Borivoj Stepanov

    A building energy performance gap can be illustrated as the difference between the theoretical (methodologically defined) and the actual energy consumption. In EU countries, Energy Performance Certificates are issued when buildings are constructed, sold, or leased. This information is the first step in order to evaluate the energy performance of the building stock. In Serbia, when issuing an energy certificate, the adopted national methodology recognizes only energy consumption for heating. The main purpose of this paper is to evaluate the energy gap and estimate the relevance of an Energy Performance Certificate to meet the national energy efficiency or carbon target. An Energy Performance Certificate determines the theoretical residential and commercial building energy efficiency or its “design intent”. This research stresses the necessity of measuring and achieving reductions in actual energy consumption through system regulation and consumers’ self-awareness in buildings. The research compares the performance of the building stock (135) that is connected to the District Heating System (DHS), with its own integrated heat meter, to Individual Gas Boiler (IGB) systems (18), in the city of Novi Sad, Serbia, built after 2014. For the purpose of comparing energy consumption, 16 buildings were selected that are very similar in terms of design, operation, and location. The data used are derived from metered consumption data, official evidence of city service companies, and Energy Performance Certificates of the considered buildings. We have determined that IGB systems have a much wider specific annual performance gap (11.19–101 kWh/m2a) than the buildings in the DHS (3.16–18.58 kWh/m2a).


  • Open Access

    Experimental and numerical investigation of thermal and fluid-flow processes in a matrix heat exchanger

    by Mladen A. Tomić, Predrag M. Živković, Biljana B. Milutinović, Mića V. Vukić, Aleksandar S. Anđelković

    The need for compact heat exchangers has led to the development of many types of surfaces that enhance the rate of heat transfer, among them the matrix heat exchangers. These heat exchangers consist of a series of perforated plates mutually separated and sealed by spacers. The goal of this research was to investigate the heat transfer process of matrix heat exchangers on the air side, at the close to ambient conditions. The research was conducted in two directions ? experimental research and CFD research. The experimental investigation was carried out over a perforated plate package with the porosity of 25.6%. The air/water matrix heat exchanger was heated by hot water and was installed in an experimental chamber at which entrance was a fan with the variable flow rate and heated by hot water. The thermocouples were attached to the surface of the perforated plate at the upwind and downwind sides, as well as at the inlet and the outlet of the chamber. During each experiment, the thermocouple readings and the air and water-flow and temperatures were recorded. In the numerical part of the research, the matrix heat exchangers with different plate porosity from 10 to 50% were investigated. The results of the numerical simulations were validated against the experimental results. On the basis of the experimental and numerical results, equations for heat transfer as the function of Reynolds number and geometrical parameters was established.