EGEvgeni I. Get’mAn

Evgeni I. Get’mAn

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Evgeni I. Get’mAn has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Prediction of the limits of isomorphous substitutions of strontium or barium by sodium and actinides for their immobilization in molybdates M1– x (Na0.5An0.5) x MoO4 (M = Sr or Ba) with a scheelite-type structure

    by E. I. Get’MAn, S. V. Radio

    Within the crystal energy theory of isomorphous substitutions, mixing energies (interaction parameters), critical decomposition temperatures (stability), limits of isomorphous substitutions, and capacities of isomorphous matrices concerning actinides were calculated. The thermodynamic stability regions of solid solutions in the Sr1–x(Na0.5An0.5)xMoO4 and Ba1–x(Na0.5An0.5)xMoO4 (where An denotes actinides) systems were evaluated. It has been shown that the magnitudes of the total mixing energy and critical decomposition temperatures are determined primarily by differences in the sizes of the substituting structural units and increase with the atomic number of the actinide. Decomposition domes of the solid solutions over the concentration range from x = 0 to 1.0 in increments of x = 0.05 are presented, allowing the determination of the decomposition temperature for a given composition, the equilibrium substitution limit at a given temperature, and the regions of thermodynamic stability. Under the temperature conditions recommended by the IAEA for radioactive waste disposal (below 373 K), continuous series of solid solutions Sr1–x(Na0.5An0.5)xMoO4 are thermodynamically stable in the case of actinides from Ac to Pu series, and are metastable or decompose for heavier actinides or in the case of solid solutions in the Ba1–x(Na0.5An0.5)xMoO4 systems. At 373 K, the isomorphous capacities (substitution limits) of SrMoO4 matrices concerning actinides were determined. The asymmetric solid solutions of the Ba1–x(Na0.5An0.5)xMoO4 systems follow not only the well-known Goldschmidt polarity (directionality) rule but also the second polarity (decomposition) rule of solid solutions previously proposed by us: “The decomposition temperature of an asymmetric regular solid solution at equal solute content is higher when based on the component with a smaller substituting structural unit size and lower when based on the component with a larger one.”

  • Prediction of thermodynamic stability and limits of isomorphous substitutions in potential high-temperature superconductors of the Pb10–xCux(PO4)6O (LK-99) system

    by E. I. Get’mAn, S. V. Radio

    Using Urusov’s crystal energy theory of isomorphous miscibility, the mixing energy and critical (maximum) decomposition temperature of solid solutions in the Pb10–xCux(PO4)6O system were calculated. Decomposition domes were constructed for the Pb10–xCux(PO4)6O system under the approximation of regular and asymmetric regular solid solutions, allowing for graphical determination of decomposition temperature at a given substitution limit or equilibrium substitution limit at a specified temperature, as well as thermodynamically stable regions of the solid solutions. It was shown that isomorphous substitution in the approximation of asymmetric regular solid solutions follows the Goldschmidt polarity rule: a smaller component dissolves in a larger one to a higher limit than in the reverse case. Additionally, our findings align with our established rule, which states that “the decomposition temperature is higher for the component with a smaller substituent structural unit and lower for the larger one”. It is hypothesized that the synthesis of Pb9Cu[(PO4)6O] (LK-99) at temperatures below the calculated values is influenced by sodium cations or other single-charged cations from uncontrolled impurities, which may stabilize the apatite structure at temperatures of 1100–1200 K.


  • Substitution limits and thermodynamic stability of solid solutions in HTSC based on iron and yttrium oxyarsenides

    by S. V. Radio, E. I. Get’mAn, L. I. Ardanova

    The mixing energies (interaction parameters) and the critical decomposition (stability) temperatures of Y1–xLnxFeAsO0.6 solid solutions, where Ln = La–Er, 0 < x < 1.0, were determined within the framework of the V. S. Urusov crystal-energetic approach in the approximation of regular solid solutions. Diagram of thermodynamic stability and domes of the solid solution decomposition have been plotted, which make it possible to calculate the equilibrium isomorphous substitution limits of yttrium for rare earth elements x depending on the decomposition temperature Td, or the decomposition temperature depending on the substitution limit. The results of calculation do not contradict to the experimental data found earlier in the literature for La1–xYxFeAsO0.6 and related systems La1–yYvFeAsO, La0.8Y0.2FeAsO0.7, and Y0.95La0.05FeAsO1–vH0.15. The results of this work can be useful in choosing the components’ ratio in “mixed” matrices and the dopant content in high-temperature superconductors, effective magnetic and other materials.


  • Open Access

    Investigation of the Heterovalent Substitution Cadmium for Lanthanum in Molybdate La2MoO6

    by K. A. Chebyshev, A. V. Ignatov, L. V. Pasechnik, N. I. Selikova, E. I. Get`mAn

    This paper presents the investigation of the heterovalent substitution of cadmium for lanthanum in the La2-xCdxMoO6-x/2 system. The samples were synthesized by the solid state reaction method at 1000°C. The samples were characterized by X-ray powder diffraction with Rietveld refinements, scanning electron microscopy with energy-dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy methods. The study results revealed that cadmium incorporation in the lanthanum molybdate leads to the transformation of the tetragonal structure of La2MoO6 to a cubic fluorite-like one. The content of the cubic phase reaches 94 in the Lа1.4Cd0.6MoO5.7 sample. The unit cell parameter of fluorite-like-phase decreases with cadmium content rising. The preferred location of cadmium ions in the cubic structure was established by the Rietveld refinement method. The heterovalent substitution cadmium for lanthanide in tetragonal La2MoO6 molybdate leads to the cubic fluorite phase stabilization in a similar way as it occurs in the process of reduction.


  • Open Access

    Determining the phase stability of luminescent materials based on the solid solutions of oxyorthosilicates (Lu1−xLnx)[(SiO4)0.5O0.5], where Ln = La−Yb

    by E. I. Get’mAn, Yu. A. Oleksii, S. V. Radio, L. I. Ardanova

    Objectives. This study aimed to predict the limits of substitution and stability of luminescent materials based on low-temperature modifications of solid solutions (spatial group P21/c) with lutetium oxyorthosilicates (Lu1−xLnx)[(SiO4)0.5O0.5], where Ln represents the rare-earth elements (REEs) of the La–Yb series.Methods. The V.S. Urusov’s crystal energy theory of isomorphous substitutions and a crystallochemical approach in the regular solid solution approximation were used to calculate the energies of the mixing (interaction parameters) of the solid solutions.Results. Using the V.S. Urusov’s theory, we calculated the energies of mixing (interaction parameters) in the systems under study. The dependences of the decomposition temperatures of solid solutions on the REE number and composition (x) were obtained and used to create a diagram of the thermodynamic stability of the solid solutions, allowing us to predict the substitution limits depending on the temperature or determine the decomposition temperature using the given substitution limits.Conclusions. The results of the study can be useful when choosing the ratio of components in matrices (host materials) and the amount of the activator (dopant) in the new luminescent, laser, and other materials based on low-temperature modifications of solid solutions of “mixed” REE oxyorthosilicates (Lu1−xLnx)[(SiO4)0.5O0.5].


  • Isomorphous Substitution of Rare-Earth Elements in Lacunary Apatite Pb8Na2(PO4)6

    by Evgeni I. Get’mAn, Stanislav N. Loboda, Alexey V. Ignatov, Vadim V. Prisedsky, Mohammed A. B. Abdul Jabar, Lyudmyla I. Ardanova

    The substitution of rare-earth elements (REEs) for Pb in the lacunary apatite Pb8Na2(PO4)6 with void structural channels was studied by means of powder X-ray diffraction (including the Rietveld refinement), scanning electron microscopy, energy-dispersive X-ray microanalysis, and IR spectroscopy and also measurements of the electrical conductivity. The substitution limits (xmax in Pb8–xLnxNa2(PO4)6Ox/2) at 800 °C were found to decrease with the atomic number of the REE from 1.40 for La to 0.12 for Yb with a rapid drop from light to heavy lanthanides (between Gd and Tb). The REE atoms substitute for Pb predominantly at Pb2 sites of the apatite structure according to the scheme 2Pb2+ + □ → 2Ln3+ + O2–, where □ is a vacancy in the structural channel. The substitution in lacunary apatite produces quite different changes in the structural parameters compared with broadly studied alkaline-earth hydroxyapatites. In spite of the much lower ionic radii of REE than that of Pb2+, the mean distances ⟨Pb1–O⟩ somewhat increase, whereas the distances ⟨Pb2–Pb2⟩ and ⟨Pb2–O4⟩ do not change considerably with the degree of substitution. This implies control of the substitution by not only spatial and charge accommodation of REE ions but also the availability of a stereochemically active 6s2 electron pair on Pb2+. The high-temperature electrical conductivity shows dependence on the degree of substitution with a minimum at x = 0.2 indicative of a possible change of the type of conductivity.


  • Synthesis, structure refinement, and electrical conductivity of sodium holmium double silicates

    by E. I. Get’MAn, L. V. Pasechnik, D. V. Korotina, E. V. Borisova, A. V. Ignatov, K. A. Chebyshev

    Sodium holmium double silicates with the apatite structure and compositions NaHo9(SiO4)6O2 and Na2Ho8(SiO4)6O have been prepared by a sol-gel process and characterized by X-ray diffraction. The crystal structure of NaHo9(SiO4)6O2 has been refined, and the electrical conductivity of both compounds has been measured.

  • Isomorphous Substitutions of Rare Earth Elements for Calcium in Synthetic Hydroxyapatites

    by Lyudmyla I. Ardanova, Evgeni I. Get’man, Stanislav N. Loboda, Vadim V. Prisedsky, Tatiana V. Tkachenko, Valeriy I. Marchenko, Valeriy P. Antonovich, Nataliya A. Chivireva, Konstantin A. Chebishev, Alexandra S. Lyashenko

    Polycrystalline hydroxyapatites Ca10−xREEx(PO4)6(OH)2−xOx were synthesized and studied by X-ray powder diffraction, infrared absorption, diffuse-reflectance spectroscopy, and thermogravimetry. The solubility limits xmax of rare earth elements (REE) in Ca hydroxyapatites decreases with an increasing REE atomic number from xmax = 2.00 for La, Pr, and Nd to xmax = 0.20 for Yb at 1100 °C. Refinements of X-ray diffraction patterns by the Rietveld method show that REE atoms substitute for Ca preferentially at the Ca(2) sites of the apatite structure. The substitution decreases the Ca(2)−O(4) atomic distances in the calcium coordination polyhedra and increases the Ca(2)−O(1,2,3) distances. This observation shows that interatomic distances depend not only on radii of the ions involved in the substitution but also on their charges.