YSYicheng Sun

Yicheng Sun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yicheng Sun has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Integrating Computer-Aided Design and Model-Based Systems Engineering for Early Zonal Hazard Analysis: Application to a Supersonic Aircraft Fuel System

    by Ayush Kamboj, Yicheng Sun

    The development of supersonic aircraft presents significant challenges in ensuring safety during early design stages, particularly for fuel tank systems exposed to extreme thermal and structural loads. Conventional document-based zonal safety analysis methods are limited in their ability to capture dynamic interactions between spatial subsystem configurations and functional system behavior during early conceptual design, leading to delayed hazard identification. This study proposes an integrated framework combining computer-aided design (CAD) and model-based systems engineering (MBSE) to support early-stage zonal hazard analysis. The framework links spatial subsystem modelling with functional system architecture to enable iterative hazard identification and mitigation. Applied to the SA-24 Phoenix conceptual supersonic aircraft, the approach identifies critical risks, including fuel vaporization, over-pressurization, and structural fatigue, and evaluates mitigation strategies such as thermal insulation and redundant venting. Functional hazard analysis and fault tree analysis are used to assess failure scenarios and ensure compliance with EASA CS-25 requirements. Results indicate an estimated reduction of up to 40% in risk priority number (RPN) values for key thermal hazard pathways and a 25% reduction in conceptual design iteration time compared with conventional approaches. The findings demonstrate that CAD–MBSE integration offers a scalable and efficient methodology for early hazard identification, contributing to safer and more reliable supersonic aircraft design.


  • Open Access

    Integrating Computer-Aided Design and Model-Based Systems Engineering for Early Zonal Hazard Analysis: Application to a Supersonic Aircraft Fuel System

    by Ayush Kamboj, Yicheng Sun

    The development of supersonic aircraft presents significant challenges in ensuring safety during early design stages, particularly for fuel tank systems exposed to extreme thermal and structural loads. Conventional document-based zonal safety analysis methods are limited in their capacity to identify hazards at the conceptual design phase. This study proposes an integrated framework combining computer-aided design (CAD) and model-based systems engineering (MBSE) to support early-stage zonal hazard analysis. The framework links spatial subsystem modelling with functional system architecture to enable iterative hazard identification and mitigation. Applied to the SA-24 Phoenix conceptual supersonic aircraft, the approach identifies critical risks, including fuel vaporization, over-pressurization, and structural fatigue, and evaluates mitigation strategies such as thermal insulation and redundant venting. Functional hazard analysis and fault tree analysis are used to assess failure scenarios and ensure compliance with EASA CS-25 requirements. Results indicate an estimated 40% reduction in risk priority number values for key thermal hazard pathways and a 25% reduction in conceptual design iteration time compared with conventional approaches. The findings demonstrate that CAD-MBSE integration offers a scalable and efficient methodology for early hazard identification, contributing to safer and more reliable supersonic aircraft design.

  • Open Access

    Integrating Computer-Aided Design and Model-Based Systems Engineering for Early Zonal Hazard Analysis: Application to a Supersonic Aircraft Fuel System

    by Ayush Kamboj, Yicheng Sun

    The development of supersonic aircraft presents significant challenges in ensuring safety during early design stages, particularly for fuel tank systems exposed to extreme thermal and structural loads. Conventional document-based zonal safety analysis methods are limited in their capacity to identify hazards at the conceptual design phase. This study proposes an integrated framework combining computer-aided design (CAD) and model-based systems engineering (MBSE) to support early-stage zonal hazard analysis. The framework links spatial subsystem modelling with functional system architecture to enable iterative hazard identification and mitigation. Applied to the SA-24 Phoenix conceptual supersonic aircraft, the approach identifies critical risks, including fuel vaporization, over-pressurization, and structural fatigue, and evaluates mitigation strategies such as thermal insulation and redundant venting. Functional hazard analysis and fault tree analysis are used to assess failure scenarios and ensure compliance with EASA CS-25 requirements. Results indicate an estimated 40% reduction in risk priority number values for key thermal hazard pathways and a 25% reduction in conceptual design iteration time compared with conventional approaches. The findings demonstrate that CAD–MBSE integration offers a scalable and efficient methodology for early hazard identification, contributing to safer and more reliable supersonic aircraft design.

  • Airliner Conceptual Designs for the Application of Alternative Fuels

    by Joseph Lok Chun Chan, Yicheng Sun, Howard Smith

    This paper investigates the application of alternative fuels in tube-and-wing aircraft configurations. Potential alternative fuel choices include biofuel, liquid hydrogen, liquefied natural gas, and ammonia. A comprehensive mission range starting from 2000 nautical miles to 8500 nautical miles is explored, designed, and analyzed using GENUS, an in-house built multidisciplinary design analysis and optimization platform. This paper aims to give a comprehensive study of different alternative fuel options and capacity combinations over different mission ranges. The different gradients of these trends demonstrate the additional benefits of using alternative fuels. The objectives of this study are 1) to determine how different fuel properties affect the designs and performance of aircraft and 2) to quantify the reduction of greenhouse gas (GHG) emissions by utilizing alternative fuel. The results show cryogenic fuel, which requires fuselage fuel tanks and/or external fuel tanks, will noticeably increase energy consumption due to drag and weight penalties. Yet, the high specific energy density properties of liquid hydrogen ([ ]) will offset the penalties and result in a reduction in specific energy consumption ([ ]), especially in a high-capacity, long-range mission. A 20.8 and 13.7% reduction in specific energy consumption is calculated between the use of kerosene-based jet fuel and [ ] for a 400 and 800 pax design with an 8500 nm mission range, respectively. In addition, the use of [ ] and biofuel can significantly reduce life cycle GHG emissions if the fuel is produced through sustainable pathways.

  • Open Access

    The Effects of the Degree of Hybridisation on the Design of Hybrid-Electric Aircraft Considering the Balance between Energy Efficiency and Mass Penalty

    by Le Kang, Yicheng Sun, Howard Smith, Junkui Mao

    The growing interest in the application of the hybrid-electric concept demands a rigorous method applied to balancing the energy efficiency improvement with the mass penalty. In hybrid-electric aircraft (HEA) design, it is necessary to avoid excessive usage of energy, which is caused by deliberate hybridising in pursuit of high electrical energy conversion efficiency. This paper presents a design method to achieve multi-objective designs conducted within a framework of multi-disciplinary design exploration appropriate for HEA, meeting the requirement of minimising the maximum take-off mass (MTOM) and fuel saving. A theoretical analysis proposes the existence of the optimum design area of HEA. This is followed by a series of demand-focused numerical design experiments that have verified the existence and position of the optimum design area by taking the mission of a short-range narrow-body airliner as the design target, considering the predicted technology timeline until 2050. Compared to a fuel-powered twin-turbofan aircraft, 65.56% fuel-saving, 16.4% reduction in flight operation cost, 44.58% reduction in block CO2 emission, and 75% improvement in the cost-specific air range (COSAR) are achieved via hybridisation using the proposed design optimisation method.


  • MDAO Method and Optimum Designs of Hybrid-Electric Civil Airliners

    by Le Kang, Yicheng Sun, Howard Smith

    Hybrid-electric civil airliners (HECAs) are considered the forerunner of the solution of relieving aviation emissions. This paper presents a multidisciplinary design analysis and optimization (MDAO) framework named GENUS, which has been extended to design HECAs. GENUS is a modular, expandable, and flexible design environment with 10 integrated modules for HECA design. Key extensions included hybrid-electric propulsion architectures (HEPAs), the corresponding powertrains, and power management strategies (PMS). In addition, a cost module and an aviation emission tracking function were developed and integrated into GENUS. GENUS was validated for investigating the design of HECAs by evaluating existing HECA concepts. Furthermore, three conventional turbofans were hybridized within GENUS to analyze the sensitivity of the performance of engines to the degree of hybridization (DoH) of power. The effects of hybridized engines on aircraft design were evaluated based on Boeing 737, demonstrating that at least 27.18% fuel saving, 9.97% energy saving, 12.40% cost saving, and 43.56% aviation emissions migration can be achieved. Finally, the potential directions of applying GENUS to explore the design space of HECA was discussed, which is useful to maximize the benefits of HECA.


  • Open Access

    Conceptual design of sonic boom stealth supersonic transports

    by Yicheng Sun, Howard Smith

    This paper introduces a supersonic transport aircraft design model developed in the GENUS aircraft conceptual design environment. A conceptual design model appropriate to supersonic transports with low-to-medium-fidelity methods are developed in GENUS. With this model, the authors reveal the relationship between the sonic boom signature and the lift and volume distributions and the possibility to optimise the lift distribution and volume distribution together so that they can cancel each other at some region. A new inspiring design concept—sonic boom stealth is proposed by the authors. The sonic boom stealth concept is expected to inspire the supersonic aircraft designers to design low-boom concepts through aircraft shaping and to achieve low ground impacts. A family of different classes of supersonic aircraft, including a single-seat supersonic demonstrator (0.47 psf), a 10-passenger supersonic business jet (0.90 psf) and a 50-seat supersonic airliner (1.02 psf), are designed to demonstrate the sonic boom stealth design principles. Although, there are challenges to balance the volume with packaging and control requirements, these concepts prove the feasibility of low-boom low-drag design for supersonic transports from a multidisciplinary perspective.


  • Design and operational assessment of a low-boom low-drag supersonic business jet

    by Yicheng Sun, Howard Smith

    There has been a worldwide interest to develop a supersonic business jet (SSBJ) for a minimum range of 4000 nm with low sonic boom intensity and high fuel efficiency. An SSBJ design model is developed in the GENUS aircraft conceptual design environment. With the design model, a low-boom low-drag SSBJ concept is designed and optimized. This article studies the design concept for its operational performances. The sustained supersonic cruise flight is studied to find out the fuel-efficient Mach number and altitude combinations. The combined supersonic and subsonic cruise flight scenarios are studied to evaluate the feasibility of boom-free flight routes. The one-stop supersonic cruise flight scenario is studied to compare the fuel consumption and time advantage over subsonic airliners. The off-design sonic boom intensity is studied to explore the operational space assuming there would be a sonic boom intensity limit in the future. Through the studies, it is revealed that there is a corresponding most fuel-efficient operating altitude for a specific cruise Mach number. To operate the aircraft near the cutoff Mach number leads to both increases in the fuel consumption (6.3%–8.1%) and the mission time (11.7%–13.1%). The business-class supersonic transport (231 g/PAX/km) consumes nearly three times fuel as the economic-class supersonic transport (77 g/PAX/km), which is still far more than the economic-class subsonic transport (20 g/PAX/km). Off-design sonic boom intensity studies reveal different trends against the common understanding: the sonic boom intensity does not necessarily decrease as the altitude increases; the sonic boom intensity does not necessarily decrease as the Mach number decreases.


  • AC discharge performance of short ball-ball and rod-plate air gaps under water mist conditions

    by Bao-Hui Chen, Jia-Zheng Lu, Bo-Wen Wang, Yi-Cheng Sun, Chuan-Ping Wu, Jie Deng

    This study explores the influence of water mist droplet diameter and the spacing between the droplets on the alternating current breakdown characteristics of a water mist-air mixture (WAM) between short ball-ball and rod-plate gaps. The experimental results show that the diameter of the water mist droplets and the electrode structure influence the breakdown while the spacing between the water droplets shows a slight affect. Computations are carried out on various droplet sizes and spacings between the droplets between ball-ball and rod-plate electrodes and it is observed that the maximum electric field in the gap increases with increasing diameter of the water mist droplets. Comparatively, the spacing between the droplets of water mist shows a small influence on the electrostatic field distortion in the gaps. In addition, the effect of water mist droplets on the electrostatic field of the ball-ball electrodes is greater than that of the rod-plate electrodes.