Abdolraouf Samadi-Maybodi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Abdolraouf Samadi-Maybodi has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
Reza Akhoondi
Analytical Division, Faculty of Chemistry, University of Mazandaran, Babolsar, Iran
6 shared publications- Mohammad Reza Shariati
Analytical Division, Faculty of Chemistry, University of Mazandaran, Babolsar, Iran
5 shared publications Hashem Ghezel-Sofla
Analytical Division, Faculty of Chemistry, University of Mazandaran, Babolsar, Iran
4 shared publicationsSeyed Karim Hassani Nejad-Darzi
Department of Chemistry, Faculty of Science, Babol University of Technology, Babol, Iran
4 shared publications- Abasalt Hosseinzadeh Colagar
Department of Molecular and Cell Biology, Faculty of Basic Science, University of Mazandaran, Babolsar, Iran
3 shared publications Amir Vahid
3 shared publications
Latest Publications
- 18 August 2026
- Published by Wiley in Luminescence
- Vol. 41 (8)
Fe‐MOF‐NH 2 @Metformin as a Peroxidase‐Like Activity for Fluorometric Glucose Sensing
In this research, an amine‐containing metal–organic framework was modified with metformin (Fe‐MOF‐NH 2 @metformin) and used as peroxidase‐like activity for fluorometric determination of glucose. The best fluorescence emission intensity ( λ m = 450 nm) was found at the excitation wavelength of λ ex = 350 nm. Results indicated that H 2 O 2 and glucose can effectively quench the fluorescence emission of Fe‐MOF‐NH 2 @metformin, and the fluorescence intensity linearly decreased with increasing concentration of H 2 O 2 or glucose. Moreover, the quenching effect of H 2 O 2 is considerably enhanced in the presence of dopamine, and hence, this compound plays a role of synergistic effect in the quenching process, and accordingly, the spectra are more differentiated and more distinguishable. The Stern–Volmer quenching constant ( K SV ) for H 2 O 2 and glucose were obtained at 0.005 and 0.004 M −1 , respectively. The binding constant ( K b ) and the site number ( n ) of Fe‐MOF‐NH 2 @metformin were also investigated and discussed. The K b and n for glucose were obtained at 209 and 0.6839, likewise for H 2 O 2 , 77 and 0.5484, respectively. The detection limits for measuring glucose and H 2 O 2 were obtained 0.511 and 0.351 μM, respectively.
- 18 August 2026
- Published by Wiley in Luminescence
- Vol. 41 (8)
Fe‐MOF‐NH 2 @Metformin as a Peroxidase‐Like Activity for Fluorometric Glucose Sensing
In this research, an amine‐containing metal–organic framework was modified with metformin (Fe‐MOF‐NH 2 @metformin) and used as peroxidase‐like activity for fluorometric determination of glucose. The best fluorescence emission intensity ( λ m = 450 nm) was found at the excitation wavelength of λ ex = 350 nm. Results indicated that H 2 O 2 and glucose can effectively quench the fluorescence emission of Fe‐MOF‐NH 2 @metformin, and the fluorescence intensity linearly decreased with increasing concentration of H 2 O 2 or glucose. Moreover, the quenching effect of H 2 O 2 is considerably enhanced in the presence of dopamine, and hence, this compound plays a role of synergistic effect in the quenching process, and accordingly, the spectra are more differentiated and more distinguishable. The Stern–Volmer quenching constant ( K SV ) for H 2 O 2 and glucose were obtained at 0.005 and 0.004 M −1 , respectively. The binding constant ( K b ) and the site number ( n ) of Fe‐MOF‐NH 2 @metformin were also investigated and discussed. The K b and n for glucose were obtained at 209 and 0.6839, likewise for H 2 O 2 , 77 and 0.5484, respectively. The detection limits for measuring glucose and H 2 O 2 were obtained 0.511 and 0.351 μM, respectively.
- 25 August 2025
- Published by Wiley in Luminescence
- Vol. 40 (8) , e70248
Functionalized CdS‐ZnS Quantum Dots With Thiolate Group Capping Agents and Their Application as Fluorescence Probe for Measurement of Europium Ion
CdS‐ZnS core‐shell quantum dots (QDs) were synthesized with three different types of capping agents. To achieve the best fluorescence emission efficiency the factors of pH, temperature, and the ratio of CdS‐ZnS QDs to the capping agent, were investigated via a full factorial experimental design. The best fluorescence intensity was obtained at pH 8, temperature 80°C, and a ratio of CdS‐ZnS to the capping agent of 1:1.5. CdS‐ZnS QDs were fabricated with different capping agents: thioglycolic acid, mercaptosuccinic acid, and L‐cysteine. The interaction of the synthesized QDs with metals ions Gd 3+ , La 3+ , Th 4+ , Pr 3+ , Eu 3+ , and Ce 4+ was investigated. The results showed that europium (III) ions significantly reduced the fluorescence emission intensity of QDs. Additionally, the fluorescence intensity decreases linearly with increasing europium (III) ion concentration. The detection limits for measuring europium (III) ions were obtained 1.56 × 10 −6 a linear dynamic range of 7.8 × 10 −6 to 5.0 × 10 −4 M. Also, the fluorescence quantum yields for CdS‐ZnS@LCY, CdS‐ZnS@MSA and CdS‐ZnS@TGA were obtained 4.23, 2.32 and 2.64, respectively. The binding constants ( K b ) of CdS‐ZnS@TGA, CdS‐ZnS@MSA, and CdS‐ZnS@LCY QDs with Eu 2+ were investigated and results were found as 194, 178, and 929, respectively. The Stern–Volmer constant and R 2 were investigated for the above ions with QDs.
- 25 August 2025
- Published by Wiley in Luminescence
- Vol. 40 (8) , e70248
Functionalized CdS‐ZnS Quantum Dots With Thiolate Group Capping Agents and Their Application as Fluorescence Probe for Measurement of Europium Ion
CdS‐ZnS core‐shell quantum dots (QDs) were synthesized with three different types of capping agents. To achieve the best fluorescence emission efficiency the factors of pH, temperature, and the ratio of CdS‐ZnS QDs to the capping agent, were investigated via a full factorial experimental design. The best fluorescence intensity was obtained at pH 8, temperature 80°C, and a ratio of CdS‐ZnS to the capping agent of 1:1.5. CdS‐ZnS QDs were fabricated with different capping agents: thioglycolic acid, mercaptosuccinic acid, and L‐cysteine. The interaction of the synthesized QDs with metals ions Gd 3+ , La 3+ , Th 4+ , Pr 3+ , Eu 3+ , and Ce 4+ was investigated. The results showed that europium (III) ions significantly reduced the fluorescence emission intensity of QDs. Additionally, the fluorescence intensity decreases linearly with increasing europium (III) ion concentration. The detection limits for measuring europium (III) ions were obtained 1.56 × 10 −6 a linear dynamic range of 7.8 × 10 −6 to 5.0 × 10 −4 M. Also, the fluorescence quantum yields for CdS‐ZnS@LCY, CdS‐ZnS@MSA and CdS‐ZnS@TGA were obtained 4.23, 2.32 and 2.64, respectively. The binding constants ( K b ) of CdS‐ZnS@TGA, CdS‐ZnS@MSA, and CdS‐ZnS@LCY QDs with Eu 2+ were investigated and results were found as 194, 178, and 929, respectively. The Stern–Volmer constant and R 2 were investigated for the above ions with QDs.
- 2 April 2025
- Published by Elsevier in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
- Vol. 337, 126113
Optical properties of novel synthesized ZrS2 quantum dots based on Escherichia coli bacteria
- 2 April 2025
- Published by Elsevier in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
- Vol. 337, 126113
Optical properties of novel synthesized ZrS2 quantum dots based on Escherichia coli bacteria
- 10 September 2024
- Published by Wiley in Luminescence
- Vol. 39 (9) , e4874
Improvement of fluorescence properties by surface modification of CdS‐ZnS quantum dots by thiol compounds and its application as a sensitive fluorescence probe for copper ion detection
The capped CdS‐ZnS quantum dots (QDs) were synthesized with various thiol capping agents of glycolic acid (TGA), mercaptosuccinic acid (MSA), and L‐cysteine (LCY) and used as fluorescence probe for determination of Cu (II) ions. The method of two‐level three‐factor full‐factorial experiment design was used to achieve the best optical fluorescence emission. Results revealed that Cu (II) ions can effectively quench the emission of QDs, and the fluorescence intensity is linearly decreased with increasing Cu (II) ion concentration. The limit of detection for CdS‐ZnS@ QDs capped with TGA, MSA, and LCY was obtained at 1.15 × 10−7, 1.32 × 10−7, and 2.19 × 10−7 mol L−1, respectively, with linear dynamic range of 3.13 × 10−6 to 1.41 × 10−4 mol L−1. Luminescence quantum yields of CdS‐ZnS@LCY, CdS‐ZnS@MSA, and CdS‐ZnS@TGA were obtained at 4.17, 1.92, and 2.47, respectively. Results indicated that no significant quenching occurred in the presence of the other metal ions. The binding constant (Kb) of capped CdS‐ZnS@ QDs with Cu2+ and the other metal ions was also investigated and discussed. The Kb value for Cu2+ was obtained considerably more than that the other ions. This work presents a new and sensitive method for determination of Cu2+ ion.
- 10 September 2024
- Published by Wiley in Luminescence
- Vol. 39 (9) , e4874
Improvement of fluorescence properties by surface modification of CdS‐ZnS quantum dots by thiol compounds and its application as a sensitive fluorescence probe for copper ion detection
The capped CdS‐ZnS quantum dots (QDs) were synthesized with various thiol capping agents of glycolic acid (TGA), mercaptosuccinic acid (MSA), and L‐cysteine (LCY) and used as fluorescence probe for determination of Cu (II) ions. The method of two‐level three‐factor full‐factorial experiment design was used to achieve the best optical fluorescence emission. Results revealed that Cu (II) ions can effectively quench the emission of QDs, and the fluorescence intensity is linearly decreased with increasing Cu (II) ion concentration. The limit of detection for CdS‐ZnS@ QDs capped with TGA, MSA, and LCY was obtained at 1.15 × 10−7, 1.32 × 10−7, and 2.19 × 10−7 mol L−1, respectively, with linear dynamic range of 3.13 × 10−6 to 1.41 × 10−4 mol L−1. Luminescence quantum yields of CdS‐ZnS@LCY, CdS‐ZnS@MSA, and CdS‐ZnS@TGA were obtained at 4.17, 1.92, and 2.47, respectively. Results indicated that no significant quenching occurred in the presence of the other metal ions. The binding constant (Kb) of capped CdS‐ZnS@ QDs with Cu2+ and the other metal ions was also investigated and discussed. The Kb value for Cu2+ was obtained considerably more than that the other ions. This work presents a new and sensitive method for determination of Cu2+ ion.
- 20 July 2024
- Published by Elsevier in Materials Letters
- Vol. 373
Novel synthesis method of carbon nanofibers (CNFs) by using Proteus mirabilis bacteria
- 20 July 2024
- Published by Elsevier in Materials Letters
- Vol. 373
Novel synthesis method of carbon nanofibers (CNFs) by using Proteus mirabilis bacteria
- 15 April 2024
- Published by Springer Nature in Journal of Environmental Health Science and Engineering
- Vol. 22 (1) , 245-262
Removal of sarafloxacin from aqueous solution through Ni/Al-layered double hydroxide@ZIF-8
In recent years, excessive amounts of drugs such as antibiotics have been used to combat COVID-19 and newly discovered viruses. This has led to the production and release of significant amounts of drugs and their metabolites as toxic pollutants in aquatic systems. Therefore, pharmaceutical wastes must be removed efficiently before entering the environment and entering water sources. In this research, Ni/Al-LDH@ZIF-8 nanocomposite was synthesized from layered double hydroxides and metal-organic frameworks and used to remove the antibiotic sarafloxacin (SRF) in the aqueous medium. The work aimed to develop the performance and combine the features of the adsorbent compounds such as high surface area, adjustable porosity, and low-density structure. Different methods implemented to analyze the nanocomposite, such as Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy. The experiment utilized the central composite design to evaluate statistics and the response level method to optimize the factors affecting the absorption process. The initial concentration of SRF, adsorbent dose, pH, and contact time were considered in this experiment. The results showed an increase in the removal efficiency of SRF to 97%. Statistical studies showed that the optimal adsorption conditions are as follows: initial concentration of SRF 40 mg·L–1, pH 6.3, adsorbent dose of Ni/Al-LDH@ZIF-8 49 mg, and contact time of 44 min. According to the model of isotherms parameters, the adsorption process is more consistence with the Freundlich model with the absorption capacity of 79.7 mg·g−1. The pseudo-second-order model described the adsorption kinetics data. Graphical abstract
- 15 April 2024
- Published by Springer Nature in Journal of Environmental Health Science and Engineering
- Vol. 22 (1) , 245-262
Removal of sarafloxacin from aqueous solution through Ni/Al-layered double hydroxide@ZIF-8
In recent years, excessive amounts of drugs such as antibiotics have been used to combat COVID-19 and newly discovered viruses. This has led to the production and release of significant amounts of drugs and their metabolites as toxic pollutants in aquatic systems. Therefore, pharmaceutical wastes must be removed efficiently before entering the environment and entering water sources. In this research, Ni/Al-LDH@ZIF-8 nanocomposite was synthesized from layered double hydroxides and metal-organic frameworks and used to remove the antibiotic sarafloxacin (SRF) in the aqueous medium. The work aimed to develop the performance and combine the features of the adsorbent compounds such as high surface area, adjustable porosity, and low-density structure. Different methods implemented to analyze the nanocomposite, such as Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy. The experiment utilized the central composite design to evaluate statistics and the response level method to optimize the factors affecting the absorption process. The initial concentration of SRF, adsorbent dose, pH, and contact time were considered in this experiment. The results showed an increase in the removal efficiency of SRF to 97%. Statistical studies showed that the optimal adsorption conditions are as follows: initial concentration of SRF 40 mg·L–1, pH 6.3, adsorbent dose of Ni/Al-LDH@ZIF-8 49 mg, and contact time of 44 min. According to the model of isotherms parameters, the adsorption process is more consistence with the Freundlich model with the absorption capacity of 79.7 mg·g−1. The pseudo-second-order model described the adsorption kinetics data. Graphical abstract
- 26 February 2024
- Published by Springer Nature in Journal of Materials Science
- Vol. 59 (9) , 3959-3969
Cytotoxicity of ZIF-8@APTES-MS on murine melanoma cells
- 26 February 2024
- Published by Springer Nature in Journal of Materials Science
- Vol. 59 (9) , 3959-3969
Cytotoxicity of ZIF-8@APTES-MS on murine melanoma cells
- 8 December 2023
- Published by Springer Nature in Journal of Environmental Health Science and Engineering
- Vol. 22 (1) , 97-121
Simultaneous removal of phenoxy herbicides, 2-methyl-4-chlorophenoxyacetic acid and 2,4-dichlorophenoxyacetic acid from aqueous media by magnetized MgAl-LDH@Fe3O4 composite: application of partial least squares and Doehlert experimental design
Today, the excessive and increasing use of phenoxy family herbicides such as 2-methyl-4-chlorophenoxyacetic acid (MCPA) and (2,4- dichlorophenoxy) acetic acid (2,4-DCPA) for reasons such as indestructibility and pollution of groundwater resources is one of the most important environmental problems. Pesticide adsorbents like layered double hydroxides (LDHs) are commonly utilized due to their straightforward synthesis, substantial specific surface area resulting from their layered structure, and the potential for surface modification. These natural minerals serve as effective options for adsorption. In this study, a co-precipitation approach was used to create an MgAl-LDH@Fe3O4 magnetic adsorbent for the simultaneous removal of MCPA and 2,4-DCPA herbicides from aqueous solution. Using different techniques such as TGA, XRD, FESEM, EDS and zeta potential, we investigated the properties of the prepared adsorbent. The partial least squares method measures the concentration of each herbicide in their mixture. The optimization of MCPA and 2,4-DCPA simultaneous adsorption by LDH was achieved through Doehlert experimental design and the response surface method. The optimal conditions for absorption were determined to be an adsorbent dose of 40.20 mg L-1, a pH of 6.8, and an initial concentration of 28.35 mg L-1. In this work, the equilibrium, kinetic, and thermodynamic absorption data of the absorption process were studied, and the obtained results were well described by the Freundlich model, and the pseudo-second-order model, respectively, and showed the spontaneity of the absorption process in this research. The highest absorption capacities of MCPA and 2.4-DCPA herbicides on the prepared adsorbent were 134.50 and 131.30 mg g-1, respectively. Graphical abstract
- 8 December 2023
- Published by Springer Nature in Journal of Environmental Health Science and Engineering
- Vol. 22 (1) , 97-121
Simultaneous removal of phenoxy herbicides, 2-methyl-4-chlorophenoxyacetic acid and 2,4-dichlorophenoxyacetic acid from aqueous media by magnetized MgAl-LDH@Fe3O4 composite: application of partial least squares and Doehlert experimental design
Today, the excessive and increasing use of phenoxy family herbicides such as 2-methyl-4-chlorophenoxyacetic acid (MCPA) and (2,4- dichlorophenoxy) acetic acid (2,4-DCPA) for reasons such as indestructibility and pollution of groundwater resources is one of the most important environmental problems. Pesticide adsorbents like layered double hydroxides (LDHs) are commonly utilized due to their straightforward synthesis, substantial specific surface area resulting from their layered structure, and the potential for surface modification. These natural minerals serve as effective options for adsorption. In this study, a co-precipitation approach was used to create an MgAl-LDH@Fe3O4 magnetic adsorbent for the simultaneous removal of MCPA and 2,4-DCPA herbicides from aqueous solution. Using different techniques such as TGA, XRD, FESEM, EDS and zeta potential, we investigated the properties of the prepared adsorbent. The partial least squares method measures the concentration of each herbicide in their mixture. The optimization of MCPA and 2,4-DCPA simultaneous adsorption by LDH was achieved through Doehlert experimental design and the response surface method. The optimal conditions for absorption were determined to be an adsorbent dose of 40.20 mg L-1, a pH of 6.8, and an initial concentration of 28.35 mg L-1. In this work, the equilibrium, kinetic, and thermodynamic absorption data of the absorption process were studied, and the obtained results were well described by the Freundlich model, and the pseudo-second-order model, respectively, and showed the spontaneity of the absorption process in this research. The highest absorption capacities of MCPA and 2.4-DCPA herbicides on the prepared adsorbent were 134.50 and 131.30 mg g-1, respectively. Graphical abstract