Sibel Kaplan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Sibel Kaplan has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Nazife Korkmaz Memiş
Faculty of Engineering and Natural Sciences, Textile Engineering Department Süleyman Demirel University Isparta Türkiye
6 shared publications Ayca Aksoy
Textile Engineering Department, Süleyman Demirel University, Isparta, Turkey
1 shared publication- Bekir Boyacı
R&D Department , Sun Tekstil San. ve Tic. A.Ş. , İzmir , Türkiye
1 shared publication Betül Akgünoğlu
1 shared publicationBilge Yilmaz
Textile Engineering Department, Süleyman Demirel University, Isparta, Turkey
1 shared publicationCem Çetin
Department of Sports Medicine , Suleyman Demirel University , Isparta , Turkey
1 shared publication
Latest Publications
- 15 September 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Radiative heating performance of sodium alginate–based sustainable composite films incorporating ceramic fillers
Radiative heating structures engineered through the management of natural radiation find applications across technical fields owing to their superior comfort, healing and energy-saving benefits. This study presents development of composite films exhibiting passive heating function by incorporating zinc oxide, tourmaline, and pumice particles into sodium alginate matrix. Besides standard chemical and morphological analyses, performances of the films in managing mid-infrared and solar radiation were evaluated via FT-IR and UV-VIS-NIR Spectroscopy devices equipped with integrating spheres. Besides heating, heat retention performances were determined under simulated conditions by a hotplate system including FIR lamp. Results indicate that films containing pumice and tourmaline particles created similar passive heating performances up to 10.09 °C and 8.55 °C relative to their particle-free counterparts and a black fabric in turn. The mentioned performances can be attributed to their superior MIR reflectance effectively redirecting MIR radiation back to the body, coupled with minimal MIR emissivity, mitigating heat loss. The results demonstrate the significant potential of the produced biodegradable passive heating composite films.
- 15 September 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Radiative heating performance of sodium alginate–based sustainable composite films incorporating ceramic fillers
Radiative heating structures engineered through the management of natural radiation find applications across technical fields owing to their superior comfort, healing and energy-saving benefits. This study presents development of composite films exhibiting passive heating function by incorporating zinc oxide, tourmaline, and pumice particles into sodium alginate matrix. Besides standard chemical and morphological analyses, performances of the films in managing mid-infrared and solar radiation were evaluated via FT-IR and UV-VIS-NIR Spectroscopy devices equipped with integrating spheres. Besides heating, heat retention performances were determined under simulated conditions by a hotplate system including FIR lamp. Results indicate that films containing pumice and tourmaline particles created similar passive heating performances up to 10.09 °C and 8.55 °C relative to their particle-free counterparts and a black fabric in turn. The mentioned performances can be attributed to their superior MIR reflectance effectively redirecting MIR radiation back to the body, coupled with minimal MIR emissivity, mitigating heat loss. The results demonstrate the significant potential of the produced biodegradable passive heating composite films.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Session IV,p. 506-517
Biomass waste-derived composite aerogel materials for sustainable passive radiative cooling
Passive radiative daytime cooling (PRDC) materials attract attention as today's innovative materials by mitigating global warming and lowering energy consumption without any energy input. However, the petroleum-based non-biodegradable sources of the polymers creates a negative burden on the environment. In this study, a sustainable and efficient PDRC composite aerogel was developed through freeze-drying using silk fibroin (SF) from waste silkworm cocoons, cellulose nanofiber (CNF) as the matrix components and aluminium oxide (Al2O3) as the particle. Solar reflectance and atmospheric window emissivity, hence cooling performance were enhanced by incorporating composite aerogel structure with Al2O3 nanoparticles at varying content (10 and 20 wt.% of matrix components). Besides morphological and chemical structure analysis using SEM and FT-IR, optical features such as radiative emissivity and solar reflectance were determined by FT-IR and UV-VIS-NIR spectrometer integrated with a diffuse integrating sphere, respectively. Cooling performances were determined under simulated conditions by a designed hotplate system including sun-simulator a halogen lamp and outdoor real-life tests. Results show that SF@CNF-20Al2O3 exhibited the maximum cooling performance with 12.25°C and 4.14°C temperature drops for bare skin and cotton fabric according to hotplate test results. Moreover, SF@CNF-10Al2O3 had the maximum outdoor cooling performance of 9.4°C and 4.1°C compared to bare skin and cotton fabric, respectively. These results suggest a sustainable and efficient cooling material through upcycling of waste silk cocoons and CNFs derived from renewable biomass with Al2O3 nanoparticles.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Session IV,p. 506-517
Biomass waste-derived composite aerogel materials for sustainable passive radiative cooling
Passive radiative daytime cooling (PRDC) materials attract attention as today's innovative materials by mitigating global warming and lowering energy consumption without any energy input. However, the petroleum-based non-biodegradable sources of the polymers creates a negative burden on the environment. In this study, a sustainable and efficient PDRC composite aerogel was developed through freeze-drying using silk fibroin (SF) from waste silkworm cocoons, cellulose nanofiber (CNF) as the matrix components and aluminium oxide (Al2O3) as the particle. Solar reflectance and atmospheric window emissivity, hence cooling performance were enhanced by incorporating composite aerogel structure with Al2O3 nanoparticles at varying content (10 and 20 wt.% of matrix components). Besides morphological and chemical structure analysis using SEM and FT-IR, optical features such as radiative emissivity and solar reflectance were determined by FT-IR and UV-VIS-NIR spectrometer integrated with a diffuse integrating sphere, respectively. Cooling performances were determined under simulated conditions by a designed hotplate system including sun-simulator a halogen lamp and outdoor real-life tests. Results show that SF@CNF-20Al2O3 exhibited the maximum cooling performance with 12.25°C and 4.14°C temperature drops for bare skin and cotton fabric according to hotplate test results. Moreover, SF@CNF-10Al2O3 had the maximum outdoor cooling performance of 9.4°C and 4.1°C compared to bare skin and cotton fabric, respectively. These results suggest a sustainable and efficient cooling material through upcycling of waste silk cocoons and CNFs derived from renewable biomass with Al2O3 nanoparticles.
- Open Access
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Session I ,p. 163-173
Multi-functional radiative cooling curtain fabric with flame-retardant and self-cleaning functions
Today, the development of functional curtain materials to promote building energy efficiency is highly demanded because of the effects of global warming and limits about natural sources. At this point, treating curtain materials with passive radiative cooling materials by different methods is valuable in thermal management of indoor environments. Besides thermal management performance, other functions such as self-cleaning and flame retardancy, which have been studied for longer periods, are crucial for building textile components. To address the mentioned requirements, a superhydrophobic passive cooling fabric was designed through a finishing treatment consisting of polyvinylidene fluoride (PVDF)-silicon dioxide (SiO2), aluminium oxide (Al2O3), and Al2O3@SiO2 on a standard polyester curtain fabric. The required porous structure was enabled by solvent exchange phase separation method and a spray-dry procedure was used considering scalability and environmental concerns. Besides chemical and morphological analyses with FT-IR and SEM, passive cooling performance of the fabrics were determined indirectly by sphere-integrated FT-IR and UV-VIS spectrophotometers and directly by a designed hotplate system with a sun simulator. Results show that the nanocomposite treatments, especially the one including binary Al2O3@SiO2 particles enabled a passive cooling performance up to 7.38°C compared to the raw fabric as a result of its enhanced solar reflectivity and infrared emissivity depending on the nanoparticles used and micro-nano multi-stage porous structure. Moreover, nanocomposite treated fabrics endow sufficient self-cleaning and flame-retardant performances as based on intrinsic characteristics of the nanocomposite materials. It can be concluded that, building textile components such as curtains can be functionalized as radiative passive coolers besides the garment systems to contribute economy and energy efficiency components of sustainability.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. Session I ,p. 163-173
Open AccessMulti-functional radiative cooling curtain fabric with flame-retardant and self-cleaning functions
Today, the development of functional curtain materials to promote building energy efficiency is highly demanded because of the effects of global warming and limits about natural sources. At this point, treating curtain materials with passive radiative cooling materials by different methods is valuable in thermal management of indoor environments. Besides thermal management performance, other functions such as self-cleaning and flame retardancy, which have been studied for longer periods, are crucial for building textile components. To address the mentioned requirements, a superhydrophobic passive cooling fabric was designed through a finishing treatment consisting of polyvinylidene fluoride (PVDF)-silicon dioxide (SiO2), aluminium oxide (Al2O3), and Al2O3@SiO2 on a standard polyester curtain fabric. The required porous structure was enabled by solvent exchange phase separation method and a spray-dry procedure was used considering scalability and environmental concerns. Besides chemical and morphological analyses with FT-IR and SEM, passive cooling performance of the fabrics were determined indirectly by sphere-integrated FT-IR and UV-VIS spectrophotometers and directly by a designed hotplate system with a sun simulator. Results show that the nanocomposite treatments, especially the one including binary Al2O3@SiO2 particles enabled a passive cooling performance up to 7.38°C compared to the raw fabric as a result of its enhanced solar reflectivity and infrared emissivity depending on the nanoparticles used and micro-nano multi-stage porous structure. Moreover, nanocomposite treated fabrics endow sufficient self-cleaning and flame-retardant performances as based on intrinsic characteristics of the nanocomposite materials. It can be concluded that, building textile components such as curtains can be functionalized as radiative passive coolers besides the garment systems to contribute economy and energy efficiency components of sustainability.
- 21 December 2024
- Published by Springer Nature in Cellulose
- Vol. 32 (2) , 1355-1375
Regenerated cellulosic fabrics having adaptive breathability and sweat transfer functions via temperature-moisture responsive nanocomposite treatment
- 21 December 2024
- Published by Springer Nature in Cellulose
- Vol. 32 (2) , 1355-1375
Regenerated cellulosic fabrics having adaptive breathability and sweat transfer functions via temperature-moisture responsive nanocomposite treatment
- 1 August 2024
- Published by Emerald Publishing in International Journal of Clothing Science and Technology
- Vol. 37 (4) , 709-720
Design of passive radiative heating nanocomposite films by managing natural radiation energy
Personal thermal management by controlling the radiation energies of both the body and the sun can be used in all environments and contributes to sustainability components with the advantages of energy saving, low chemical usage and comfort enhancements under dynamic conditions. In this study, passive radiative heating nanocomposite films were produced using sodium alginate as the matrix and zinc oxide (ZnO) and aluminum oxide (Al2O3) nanoparticles as nanofillers having far infrared radiation reflecting, hence passive heating functions. Nanocomposite film solutions were prepared by stirring sodium alginate powder, deionized water, ZnO and Al2O3 nanoparticles (20% wt of matrix polymer) with surfactant using magnetic and ultrasonic stirrers in turn. Films produced within Petri dishes after drying at room temperature were analyzed by FT-IR, UV-VIS-NIR spectroscopy and SEM for chemical, radiation management and morphological characteristics, respectively. Emissivity values giving idea about the heating performances of the films were determined with an IR camera and a hotplate system. Moreover, direct heating performances were measured by the hotplate system including a far-infrared lamp. Results showed that the emissivity of the films increased by approximately 18% and 16% with ZnO and Al2O3 nanoparticles, respectively. Moreover, NaAlg–Al2O3 nanocomposite film exhibited passive radiative heating performance of 3.58 °C, higher than the heating performance of NaAlg–ZnO nanocomposite film which is 2.97 °C when compared to the reference NaAlg film. These results indicate that both NaAlg–ZnO and especially NaAlg–Al2O3 nanocomposite films have excellent far-infrared emission and absorption properties ensuring a significant heating effect. In addition to other clothing types, the heating performance obtained with the produced nanocomposite structures may be applied to different types of cosmetic/medical applications (beauty mask, wound dresses, etc.) enabling skincare/healing with the advantage of the sodium alginate matrix.
- 1 August 2024
- Published by Emerald Publishing in International Journal of Clothing Science and Technology
- Vol. 37 (4) , 709-720
Design of passive radiative heating nanocomposite films by managing natural radiation energy
Personal thermal management by controlling the radiation energies of both the body and the sun can be used in all environments and contributes to sustainability components with the advantages of energy saving, low chemical usage and comfort enhancements under dynamic conditions. In this study, passive radiative heating nanocomposite films were produced using sodium alginate as the matrix and zinc oxide (ZnO) and aluminum oxide (Al2O3) nanoparticles as nanofillers having far infrared radiation reflecting, hence passive heating functions. Nanocomposite film solutions were prepared by stirring sodium alginate powder, deionized water, ZnO and Al2O3 nanoparticles (20% wt of matrix polymer) with surfactant using magnetic and ultrasonic stirrers in turn. Films produced within Petri dishes after drying at room temperature were analyzed by FT-IR, UV-VIS-NIR spectroscopy and SEM for chemical, radiation management and morphological characteristics, respectively. Emissivity values giving idea about the heating performances of the films were determined with an IR camera and a hotplate system. Moreover, direct heating performances were measured by the hotplate system including a far-infrared lamp. Results showed that the emissivity of the films increased by approximately 18% and 16% with ZnO and Al2O3 nanoparticles, respectively. Moreover, NaAlg–Al2O3 nanocomposite film exhibited passive radiative heating performance of 3.58 °C, higher than the heating performance of NaAlg–ZnO nanocomposite film which is 2.97 °C when compared to the reference NaAlg film. These results indicate that both NaAlg–ZnO and especially NaAlg–Al2O3 nanocomposite films have excellent far-infrared emission and absorption properties ensuring a significant heating effect. In addition to other clothing types, the heating performance obtained with the produced nanocomposite structures may be applied to different types of cosmetic/medical applications (beauty mask, wound dresses, etc.) enabling skincare/healing with the advantage of the sodium alginate matrix.
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. I Textiles,p. 214-220
Bed microclimate management performances of mattress ticking fabrics according to their transfer characteristics
Sleep quality is affected by mattress components, mainly thermal comfort management ability of the microclimate border layers. Knitted quilted mattress ticking fabrics made of polyester, polypropylene, viscose, lyocell, wool and their blends combined with polyester mid-layer were investigated for their effects on thermal comfort of the bed microclimate. For this aim water vapor, liquid absorption and transfer tests and microclimate measurements on the simulated bed microclimate were carried out. Results showed that lyocell viscose and its blend with linen have better breathability, liquid absorption and transfer characteristics and can be suggested for better sweat management within the bed microclimate system.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. I Textiles,p. 214-220
Open AccessBed microclimate management performances of mattress ticking fabrics according to their transfer characteristics
Sleep quality is affected by mattress components, mainly thermal comfort management ability of the microclimate border layers. Knitted quilted mattress ticking fabrics made of polyester, polypropylene, viscose, lyocell, wool and their blends combined with polyester mid-layer were investigated for their effects on thermal comfort of the bed microclimate. For this aim water vapor, liquid absorption and transfer tests and microclimate measurements on the simulated bed microclimate were carried out. Results showed that lyocell viscose and its blend with linen have better breathability, liquid absorption and transfer characteristics and can be suggested for better sweat management within the bed microclimate system.
- Open Access
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. I Textiles,p. 235-241
PVDF films with optimized porous structure using non-solvent induced phase separation for passive radiative cooling
Today, as personal thermal management gains importance for both increased comfort and energy saving advantages, body cooling through the clothing system by using natural energies has come to the fore. In this study, as the first step of a cooling garment design project, radiative cooling films having porous structures with tailored optical structures to enhance UV-VIS-NIR reflectivity were produced from polyvinylidene fluoride (PVDF), via non-solvent-induced phase separation method using two solvents and water. The porous structure of PVDF films was optimized by differing polymer (5 and 10wt. %), water concentrations (3-10%) and drying conditions. Besides SEM analyses to determine the pore characteristics, cooling performances were evaluated by a hotplate apparatus combined with a halogen lamb as a sun simulator. Indirect emissivity calculations were carried out from the IR camera images of the films heated at the same temperature with a fabric whose temperature was measured with sensors. According to SEM images, PVDF films having 10 wt.% polymer and 3% water concentrations had the most porous structure. The emissivity of the optimized PVDF film with a hierarchically porous structure was enhanced to 96.6% with a temperature decrease of 1.06°C under a solar irradiance of 600 W·m-2 indicating a good potential for a further cooling structure as a nanocomposite and coated fabric forms.
- 1 January 2024
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. I Textiles,p. 235-241
Open AccessPVDF films with optimized porous structure using non-solvent induced phase separation for passive radiative cooling
Today, as personal thermal management gains importance for both increased comfort and energy saving advantages, body cooling through the clothing system by using natural energies has come to the fore. In this study, as the first step of a cooling garment design project, radiative cooling films having porous structures with tailored optical structures to enhance UV-VIS-NIR reflectivity were produced from polyvinylidene fluoride (PVDF), via non-solvent-induced phase separation method using two solvents and water. The porous structure of PVDF films was optimized by differing polymer (5 and 10wt. %), water concentrations (3-10%) and drying conditions. Besides SEM analyses to determine the pore characteristics, cooling performances were evaluated by a hotplate apparatus combined with a halogen lamb as a sun simulator. Indirect emissivity calculations were carried out from the IR camera images of the films heated at the same temperature with a fabric whose temperature was measured with sensors. According to SEM images, PVDF films having 10 wt.% polymer and 3% water concentrations had the most porous structure. The emissivity of the optimized PVDF film with a hierarchically porous structure was enhanced to 96.6% with a temperature decrease of 1.06°C under a solar irradiance of 600 W·m-2 indicating a good potential for a further cooling structure as a nanocomposite and coated fabric forms.
- 23 May 2023
- Published by Emerald Publishing in International Journal of Clothing Science and Technology
- Vol. 35 (4) , 648-664
Objective and subjective evaluations of quilted mattress ticking fabrics for their thermal comfort performances
Purpose: Sleep quality, a crucial parameter for health and life performance, is affected by mattress components; particularly mechanical and thermal comfort management ability of the upper layers. The aim of this study is to investigate effects of quilted mattress ticking fabric material (polyester, polypropylene, viscose, lyocell and their blends) on thermal comfort of the bedding system by objective and subjective measurements.Design/methodology/approach: The permeability (air and water vapour), heat transfer, water absorption, transfer and drying behaviours of knitted quilted fabrics which influence the thermal comfort of the bedding system were investigated. Subjective coolness and dampness evaluations were gathered by forearm and hand-palm tests to provide more realistic discussion in light of fabric characteristics.Findings: According to the results, polypropylene can be suggested for winter use with its higher air and water vapour permeabilities, lower thermal absorption and conductivities and warmer evaluation results. Lyocell can be suggested for summer use with also high permeabilities, higher thermal absorption and conductivities and cooler evaluation results. Polyester and viscose may also be considered for winter and summer in turn as a result of thermal feelings they create.Originality/value: In addition to fabric thermal, permeability, liquid absorption and transfer properties, this study also includes subjective coolness and dampness evaluations which can provide realistic results regarding the coolness-to-touch and liquid transfer performances of mattress ticking fabrics. The relationships among objective and subjective data were investigated and the proposed subjective evaluation techniques can be used for different products.
- 23 May 2023
- Published by Emerald Publishing in International Journal of Clothing Science and Technology
- Vol. 35 (4) , 648-664
Objective and subjective evaluations of quilted mattress ticking fabrics for their thermal comfort performances
Purpose: Sleep quality, a crucial parameter for health and life performance, is affected by mattress components; particularly mechanical and thermal comfort management ability of the upper layers. The aim of this study is to investigate effects of quilted mattress ticking fabric material (polyester, polypropylene, viscose, lyocell and their blends) on thermal comfort of the bedding system by objective and subjective measurements.Design/methodology/approach: The permeability (air and water vapour), heat transfer, water absorption, transfer and drying behaviours of knitted quilted fabrics which influence the thermal comfort of the bedding system were investigated. Subjective coolness and dampness evaluations were gathered by forearm and hand-palm tests to provide more realistic discussion in light of fabric characteristics.Findings: According to the results, polypropylene can be suggested for winter use with its higher air and water vapour permeabilities, lower thermal absorption and conductivities and warmer evaluation results. Lyocell can be suggested for summer use with also high permeabilities, higher thermal absorption and conductivities and cooler evaluation results. Polyester and viscose may also be considered for winter and summer in turn as a result of thermal feelings they create.Originality/value: In addition to fabric thermal, permeability, liquid absorption and transfer properties, this study also includes subjective coolness and dampness evaluations which can provide realistic results regarding the coolness-to-touch and liquid transfer performances of mattress ticking fabrics. The relationships among objective and subjective data were investigated and the proposed subjective evaluation techniques can be used for different products.
- 13 October 2022
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 33 (3) , 238-248
A novel approach for developing smart cotton fabric with dynamic breathability and easy care features
In this study, cotton fabrics were treated with temperature-water responsive nanocomposites consisting of shape memory polyurethane (SMPU) and cellulose nanowhiskers (CNWs), for smart crease recovery/retention functions besides breathability with dynamic porosity. The smart crease recovery/retention functions were determined in air/water at different temperatures and relative humidity simulating laundry and drying processes and air permeability test was conducted at different fabric temperatures. Also, physical-mechanical properties (weight, thickness, bending rigidity, and strength) and washing fastness properties were evaluated. Fourier-transform infrared (FT-IR) and scanning electron microscope (SEM) analyses confirm the SMPU-CNW nanocomposite presence on fabric. Test results show that the treated cotton fabrics have not only dual responsive shape memory properties providing smart permeability, but also dynamic crease recovery/retention with enhanced mechanical properties. This method could contribute t ecological and economic aspects of sustainability as a result of less energy and polymer consumption with non-ironing property and treatment procedures and low chemical footprint.
- 13 October 2022
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 33 (3) , 238-248
A novel approach for developing smart cotton fabric with dynamic breathability and easy care features
In this study, cotton fabrics were treated with temperature-water responsive nanocomposites consisting of shape memory polyurethane (SMPU) and cellulose nanowhiskers (CNWs), for smart crease recovery/retention functions besides breathability with dynamic porosity. The smart crease recovery/retention functions were determined in air/water at different temperatures and relative humidity simulating laundry and drying processes and air permeability test was conducted at different fabric temperatures. Also, physical-mechanical properties (weight, thickness, bending rigidity, and strength) and washing fastness properties were evaluated. Fourier-transform infrared (FT-IR) and scanning electron microscope (SEM) analyses confirm the SMPU-CNW nanocomposite presence on fabric. Test results show that the treated cotton fabrics have not only dual responsive shape memory properties providing smart permeability, but also dynamic crease recovery/retention with enhanced mechanical properties. This method could contribute t ecological and economic aspects of sustainability as a result of less energy and polymer consumption with non-ironing property and treatment procedures and low chemical footprint.
- Open Access
- 19 November 2021
- Published by University of Ljubljana in Tekstilec
- Vol. 64 (4) , 325-337
Transfer and Friction Characteristics of Sports Socks Fabrics Made of Synthetic Fibres in Different Structures
Sports socks fabrics produced from polyester, polypropylene, their modified forms Thermocool®, Polycolon®, in three different structures (single jersey, piquet, terry) were investigated for their skin-fabric friction, permeability (air and water vapour), liquid absorption and transfer (absorbency, immersion, absorption capacity, wetback and drying) properties. According to the results, the effect of structure is dominant for frictional characteristics but focusing on the material, polypropylene created a bulkier and lighter structure with lower friction coefficients, an advantage for sports socks. The effect of structure is greater than the material also for some thermal comfort parameters, e.g. air permeability and absorbency. Focusing on materials, besides their better liquid transfer characteristics, modified forms of both fibres had worse performances for air permeability and absorbency compared to their standard forms. Absorption capacity, wetback and drying performances were related to fabric density besides the polyester’s higher regain capacity. While Polycolon® had superiority for wetback performance against standard polypropylene, this was not the case for Thermocool®; however, both modified materials showed apparent superiority for drying periods. Piquet structures were advantageous for absorption capacity and wetback performances for polypropylene. For sports socks parts, specific needs can be met by changing the fabric structure. Considering the materials, polypropylene and Polycolon® can be recommended for both thermal and tactile aspects.
- 19 November 2021
- Published by University of Ljubljana in Tekstilec
- Vol. 64 (4) , 325-337
Open AccessTransfer and Friction Characteristics of Sports Socks Fabrics Made of Synthetic Fibres in Different Structures
Sports socks fabrics produced from polyester, polypropylene, their modified forms Thermocool®, Polycolon®, in three different structures (single jersey, piquet, terry) were investigated for their skin-fabric friction, permeability (air and water vapour), liquid absorption and transfer (absorbency, immersion, absorption capacity, wetback and drying) properties. According to the results, the effect of structure is dominant for frictional characteristics but focusing on the material, polypropylene created a bulkier and lighter structure with lower friction coefficients, an advantage for sports socks. The effect of structure is greater than the material also for some thermal comfort parameters, e.g. air permeability and absorbency. Focusing on materials, besides their better liquid transfer characteristics, modified forms of both fibres had worse performances for air permeability and absorbency compared to their standard forms. Absorption capacity, wetback and drying performances were related to fabric density besides the polyester’s higher regain capacity. While Polycolon® had superiority for wetback performance against standard polypropylene, this was not the case for Thermocool®; however, both modified materials showed apparent superiority for drying periods. Piquet structures were advantageous for absorption capacity and wetback performances for polypropylene. For sports socks parts, specific needs can be met by changing the fabric structure. Considering the materials, polypropylene and Polycolon® can be recommended for both thermal and tactile aspects.