Domenico De Fazio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Domenico De Fazio has a total of 272 co-authors. Here are the top co-authors by number of shared publications:
- Andrea Carlo Ferrari
Cambridge Graphene Centre, University of Cambridge, Cambridge, UK
9 shared publications - Giancarlo Soavi
Institute of Solid State Physics, Friedrich Schiller University Jena, Jena, Germany
5 shared publications - Giovanni Antonio Salvatore
Department of Molecular Science and Nanosystems, Cà Foscari University of Venice, Venice, Italy
4 shared publications - Kenji Watanabe
National Institute for Materials Science
4 shared publications U. Sassi
Cambridge Graphene Centre, University of Cambridge, Cambridge, UK
4 shared publications- Duhee Yoon
Cambridge Graphene Centre, University of Cambridge, Cambridge CB3 0FA, UK
3 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by Elsevier in SSRN Electronic Journal
Deacetylation-guided Self-Assembly of Chitin Nanocrystals for Sustainable and Reusable Electrochemical Sensors
The escalating demand for sustainable environmental monitoring necessitates the development of field-deployable electrochemical sensors that harmonize marked analytical performances, mainly related to efficient charge transport, and good mechanical stability with eco-friendliness. Achieving this balance requires functional interfaces in which renewable materials, hierarchical organization, and interfacial electron-transfer properties are rationally coupled. Here, surface-deacetylated chitin nanocrystals (CsNCs) derived from seafood waste are approved to be versatile interfacial material for the realization of electrochemical sensing elements. We demonstrate that the surface degree of deacetylation, optimized through a systematic kinetic study, dictates the CsNCs' self-assembly ability, ultimately resulting in a suppression of chiral nematic ordering.The close interplay between surface chemistry and morphology serves as a precise chemical lever to modulate electrochemical performance, as revealed by electron-transfer kinetics and resistivity analysis. Increasing surface deacetylation generates chitosan-rich nanocrystal interfaces that preserve the crystalline rod-like core while lowering charge-transfer resistance and improving redox accessibility compared with conventional chitosan films. Exploiting these design rules, a CsNCs-based platform is developed for the indirect detection of glyphosate in water via Cu2+-mediated complexation. Notably, the biobased sensing film enables a "peel-and-reuse" cycle, facilitating rapid electrode regeneration and fulfilling the requirements of circular economy. Overall, this work establishes deacetylation-controlled CsNCs films as waste-biomass-derived electrochemical interfaces and provides transferable design rules linking surface chemistry, supramolecular organization, and charge transport in sustainable applied materials.
- 1 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDeacetylation-guided Self-Assembly of Chitin Nanocrystals for Sustainable and Reusable Electrochemical Sensors
The escalating demand for sustainable environmental monitoring necessitates the development of field-deployable electrochemical sensors that harmonize marked analytical performances, mainly related to efficient charge transport, and good mechanical stability with eco-friendliness. Achieving this balance requires functional interfaces in which renewable materials, hierarchical organization, and interfacial electron-transfer properties are rationally coupled. Here, surface-deacetylated chitin nanocrystals (CsNCs) derived from seafood waste are approved to be versatile interfacial material for the realization of electrochemical sensing elements. We demonstrate that the surface degree of deacetylation, optimized through a systematic kinetic study, dictates the CsNCs' self-assembly ability, ultimately resulting in a suppression of chiral nematic ordering.The close interplay between surface chemistry and morphology serves as a precise chemical lever to modulate electrochemical performance, as revealed by electron-transfer kinetics and resistivity analysis. Increasing surface deacetylation generates chitosan-rich nanocrystal interfaces that preserve the crystalline rod-like core while lowering charge-transfer resistance and improving redox accessibility compared with conventional chitosan films. Exploiting these design rules, a CsNCs-based platform is developed for the indirect detection of glyphosate in water via Cu2+-mediated complexation. Notably, the biobased sensing film enables a "peel-and-reuse" cycle, facilitating rapid electrode regeneration and fulfilling the requirements of circular economy. Overall, this work establishes deacetylation-controlled CsNCs films as waste-biomass-derived electrochemical interfaces and provides transferable design rules linking surface chemistry, supramolecular organization, and charge transport in sustainable applied materials.
- Open Access
- 23 September 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (39) , 13292-13300
Highly Efficient Exciton Modulation in MoSe2/PdSe2 Heterostructures
We report a pronounced ∼6-fold enhancement of room-temperature A-exciton emission in a type-I MoSe2/PdSe2 van der Waals heterostructure, yielding a photoluminescence quantum yield of 6%, as compared to ∼1% for as-exfoliated monolayer MoSe2. This unusual enhancement is accompanied by strong quenching of the B exciton, consistent with interlayer electronic coupling that redistributes exciton populations toward the radiative A-exciton channel. Power- and temperature-dependent measurements reveal a suppression of exciton–exciton annihilation and a crossover to quenched emission at a low temperature, indicating a redistribution of exciton relaxation pathways. Photoluminescence excitation spectroscopy further reveals a broadband enhancement spanning 450–725 nm. These results demonstrate that interlayer electronic coupling can be used as an efficient means to redirect exciton populations toward radiative channels, enhancing emission efficiency in two-dimensional semiconductors without chemical modification or significant strain.
- 23 September 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (39) , 13292-13300
Open AccessHighly Efficient Exciton Modulation in MoSe2/PdSe2 Heterostructures
We report a pronounced ∼6-fold enhancement of room-temperature A-exciton emission in a type-I MoSe2/PdSe2 van der Waals heterostructure, yielding a photoluminescence quantum yield of 6%, as compared to ∼1% for as-exfoliated monolayer MoSe2. This unusual enhancement is accompanied by strong quenching of the B exciton, consistent with interlayer electronic coupling that redistributes exciton populations toward the radiative A-exciton channel. Power- and temperature-dependent measurements reveal a suppression of exciton–exciton annihilation and a crossover to quenched emission at a low temperature, indicating a redistribution of exciton relaxation pathways. Photoluminescence excitation spectroscopy further reveals a broadband enhancement spanning 450–725 nm. These results demonstrate that interlayer electronic coupling can be used as an efficient means to redirect exciton populations toward radiative channels, enhancing emission efficiency in two-dimensional semiconductors without chemical modification or significant strain.
- Open Access
- 29 July 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 7586
Single-photon detection in few-layer NbSe2 superconducting nanowires
Superconducting Nanowire Single-Photon Detectors (SNSPDs) are key building blocks for photonic quantum technologies due to their ability to detect single photons with ultra-high efficiency, low dark counts and fast temporal resolution. Superconducting materials exhibiting high uniformity, large absorption cross-section and atomic-scale thickness are desirable to extend single-photon detection from the near-infrared up to the terahertz regime, where existing material choices are especially constrained. Substrate independence would further open the way to integrating detectors onto functional materials and heterostructures, enhancing performance and enabling proximal readout of a wide range of individual excitations. Here, we pattern the prototypical two-dimensional superconductor niobium diselenide (NbSe 2 ) into few-layer nanowires less than 100 nm wide and demonstrate single-photon detection at 780 nm and 1550 nm. At the same time, the dark-count rate remains below 1 Hz up to the switching current and we achieve a timing jitter below 50 ps. We estimate via a diffusive hot-spot model that materials and geometric parameters would allow a theoretical cut-off wavelength in the millimetre range, assuming state-of-the-art device parameters. Our results open up routes toward quantum-limited detectors integrated into quantum-photonic circuits and quantum devices, with the potential for novel detection capabilities and unprecedented energy sensitivity.
- 29 July 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 7586
Open AccessSingle-photon detection in few-layer NbSe2 superconducting nanowires
Superconducting Nanowire Single-Photon Detectors (SNSPDs) are key building blocks for photonic quantum technologies due to their ability to detect single photons with ultra-high efficiency, low dark counts and fast temporal resolution. Superconducting materials exhibiting high uniformity, large absorption cross-section and atomic-scale thickness are desirable to extend single-photon detection from the near-infrared up to the terahertz regime, where existing material choices are especially constrained. Substrate independence would further open the way to integrating detectors onto functional materials and heterostructures, enhancing performance and enabling proximal readout of a wide range of individual excitations. Here, we pattern the prototypical two-dimensional superconductor niobium diselenide (NbSe 2 ) into few-layer nanowires less than 100 nm wide and demonstrate single-photon detection at 780 nm and 1550 nm. At the same time, the dark-count rate remains below 1 Hz up to the switching current and we achieve a timing jitter below 50 ps. We estimate via a diffusive hot-spot model that materials and geometric parameters would allow a theoretical cut-off wavelength in the millimetre range, assuming state-of-the-art device parameters. Our results open up routes toward quantum-limited detectors integrated into quantum-photonic circuits and quantum devices, with the potential for novel detection capabilities and unprecedented energy sensitivity.
- Top Cited PapersOpen Access
- 16 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Advances and Challenges in Wearable Sensors for Health Monitoring
Analytical tools may revolutionize healthcare by enabling accessible, rapid, and decentralized testing. Wearable (bio)sensors, in particular, provide frequent or continuous patient monitoring through non- to minimally invasive measurements. This approach yields unprecedented amounts of health-related information, leading to more informed clinical decision-making and closer patient follow-up. In this mega-review article, we bring together leading researchers in the field to discuss the state of the art in wearable devices for health monitoring. We begin by providing a broad overview of the field through citation network analysis. We then review the application of chemical (bio)sensors in biofluids (e.g., sweat, saliva, tears, interstitial fluid, and cerebrospinal fluid), highlighting the challenges and advantages associated with each. Subsequently, we discuss the construction of wearable devices and their main formats (e.g., smart contact lenses, textiles, mouthguards, watches/wristbands, and implantable systems). Physical sensors are addressed in a dedicated section focusing on the assessment of heart rate, blood pressure, and body temperature. The role of soft electronics in wearable devices is also examined, as these technologies are essential for enhancing user comfort and sensor reliability, which demands advances in materials science. Furthermore, we present strategies for signal acquisition and transmission, as well as approaches for on-body energy harvesting and device self-powering. The use of artificial intelligence and machine learning is then discussed as a means of enhancing analytical performance and managing the large volumes of data generated by wearable devices. Finally, business, regulatory, and ethical considerations are examined. We expect that this review will provide an overview of sensing and biosensing technologies for health-related applications, identify promising research directions, and inspire future developments.
- 16 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Top Cited PapersOpen AccessAdvances and Challenges in Wearable Sensors for Health Monitoring
Analytical tools may revolutionize healthcare by enabling accessible, rapid, and decentralized testing. Wearable (bio)sensors, in particular, provide frequent or continuous patient monitoring through non- to minimally invasive measurements. This approach yields unprecedented amounts of health-related information, leading to more informed clinical decision-making and closer patient follow-up. In this mega-review article, we bring together leading researchers in the field to discuss the state of the art in wearable devices for health monitoring. We begin by providing a broad overview of the field through citation network analysis. We then review the application of chemical (bio)sensors in biofluids (e.g., sweat, saliva, tears, interstitial fluid, and cerebrospinal fluid), highlighting the challenges and advantages associated with each. Subsequently, we discuss the construction of wearable devices and their main formats (e.g., smart contact lenses, textiles, mouthguards, watches/wristbands, and implantable systems). Physical sensors are addressed in a dedicated section focusing on the assessment of heart rate, blood pressure, and body temperature. The role of soft electronics in wearable devices is also examined, as these technologies are essential for enhancing user comfort and sensor reliability, which demands advances in materials science. Furthermore, we present strategies for signal acquisition and transmission, as well as approaches for on-body energy harvesting and device self-powering. The use of artificial intelligence and machine learning is then discussed as a means of enhancing analytical performance and managing the large volumes of data generated by wearable devices. Finally, business, regulatory, and ethical considerations are examined. We expect that this review will provide an overview of sensing and biosensing technologies for health-related applications, identify promising research directions, and inspire future developments.
- Open Access
- 1 June 2026
- Published by American Chemical Society (ACS) in ACS Photonics
Enhanced Terahertz Photoresponse via Acoustic Plasmon Cavity Resonances in Scalable Graphene
- 1 June 2026
- Published by American Chemical Society (ACS) in ACS Photonics
Open AccessEnhanced Terahertz Photoresponse via Acoustic Plasmon Cavity Resonances in Scalable Graphene
- Open Access
- 18 December 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (30)
Broadband, Flexible, Skin‐Compatible Carbon Dots/Graphene Photodetectors for Wearable Applications
The development of wearable photodetectors demands a unique combination of broadband optical sensitivity, mechanical flexibility, and skin compatibility, with these requirements rarely met simultaneously by existing technologies. Here, photodetectors combining all of these performances are demonstrated through the integration of carbon dots, engineered for extended ultraviolet‐to‐near‐infrared absorption, with single‐layer graphene transferred onto a plastic substrate. Unlike traditional quantum dot systems, these carbon dots achieve a broad ultraviolet‐to‐near‐infrared response without toxic heavy metals. Graphene provides an efficient conducting channel for charge transport, while a biocompatible chitosan–glycerol electrolyte enables efficient, low‐voltage carrier modulation, with peak performance at approximately 0.5 V gate bias. The resulting photodetectors exhibit a broadband photoresponse with responsivities of approximately 0.19 A W −1 at 406 nm, 0.32 A W −1 at 642 nm, and 0.18 A W −1 at 785 nm. They maintain consistent performance at a bending radius of 0.8 cm with negligible degradation after repeated cycles. Furthermore, skin compatibility and reactive oxygen species assays confirmed the non‐toxic and photo‐safe nature of the devices for direct skin contact. The combination of broadband absorption (400–800 nm), flexibility, and skin compatibility, along with low‐voltage operation (<1.5 V), positions these photodetectors as promising building blocks for next‐generation wearable optoelectronics.
- 18 December 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (30)
Open AccessBroadband, Flexible, Skin‐Compatible Carbon Dots/Graphene Photodetectors for Wearable Applications
The development of wearable photodetectors demands a unique combination of broadband optical sensitivity, mechanical flexibility, and skin compatibility, with these requirements rarely met simultaneously by existing technologies. Here, photodetectors combining all of these performances are demonstrated through the integration of carbon dots, engineered for extended ultraviolet‐to‐near‐infrared absorption, with single‐layer graphene transferred onto a plastic substrate. Unlike traditional quantum dot systems, these carbon dots achieve a broad ultraviolet‐to‐near‐infrared response without toxic heavy metals. Graphene provides an efficient conducting channel for charge transport, while a biocompatible chitosan–glycerol electrolyte enables efficient, low‐voltage carrier modulation, with peak performance at approximately 0.5 V gate bias. The resulting photodetectors exhibit a broadband photoresponse with responsivities of approximately 0.19 A W −1 at 406 nm, 0.32 A W −1 at 642 nm, and 0.18 A W −1 at 785 nm. They maintain consistent performance at a bending radius of 0.8 cm with negligible degradation after repeated cycles. Furthermore, skin compatibility and reactive oxygen species assays confirmed the non‐toxic and photo‐safe nature of the devices for direct skin contact. The combination of broadband absorption (400–800 nm), flexibility, and skin compatibility, along with low‐voltage operation (<1.5 V), positions these photodetectors as promising building blocks for next‐generation wearable optoelectronics.
- Open Access
- 18 August 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (40) , 35322-35332
Enhanced Piezoelectricity in Sustainable-By-Design Chitosan Nanocomposite Soft Thin Films for Green Sensors
Piezoelectricity, the generation of an electric charge in response to mechanical stress, is a key property in both natural and synthetic materials. This study significantly boosts the piezoelectric response of chitosan, a biodegradable biopolymer, by integrating chitin/surface-deacetylated chitin nanocrystals into natural chitosan-based thin films. The resulting materials, produced in our laboratories, achieve d33 values of up to 18.7 ± 1.1 pm V-1, a marked improvement over 8.9 ± 0.6 pm V-1 observed in pure chitosan films, thanks to the increased crystallinity provided by the nanocrystals. We utilize piezoresponse force microscopy (PFM) to accurately measure the d33 coefficient, employing an engineered extraction method that eliminates the electrostatic contribution, which can overestimate the piezoelectric response. This work introduces a soft, elastomer-like piezoelectric thin film entirely derived from upcycled biowaste. The chitosan-based films combine high elasticity (up to 40% strain) with a low Young's modulus (∼100 MPa), closely mimicking soft biological tissues. Unlike previously reported piezoelectric materials, which typically rely on synthetic or inorganic components, our films are fully biobased and mechanically compliant, making them ideal for applications in prosthetics, wearable devices, soft robotics, and sustainable energy harvesting.
- 18 August 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (40) , 35322-35332
Open AccessEnhanced Piezoelectricity in Sustainable-By-Design Chitosan Nanocomposite Soft Thin Films for Green Sensors
Piezoelectricity, the generation of an electric charge in response to mechanical stress, is a key property in both natural and synthetic materials. This study significantly boosts the piezoelectric response of chitosan, a biodegradable biopolymer, by integrating chitin/surface-deacetylated chitin nanocrystals into natural chitosan-based thin films. The resulting materials, produced in our laboratories, achieve d33 values of up to 18.7 ± 1.1 pm V-1, a marked improvement over 8.9 ± 0.6 pm V-1 observed in pure chitosan films, thanks to the increased crystallinity provided by the nanocrystals. We utilize piezoresponse force microscopy (PFM) to accurately measure the d33 coefficient, employing an engineered extraction method that eliminates the electrostatic contribution, which can overestimate the piezoelectric response. This work introduces a soft, elastomer-like piezoelectric thin film entirely derived from upcycled biowaste. The chitosan-based films combine high elasticity (up to 40% strain) with a low Young's modulus (∼100 MPa), closely mimicking soft biological tissues. Unlike previously reported piezoelectric materials, which typically rely on synthetic or inorganic components, our films are fully biobased and mechanically compliant, making them ideal for applications in prosthetics, wearable devices, soft robotics, and sustainable energy harvesting.
- Open Access
- 15 May 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (20) , 19027-19034
Tunable Exciton Modulation and Efficient Charge Transfer in MoS2/Graphene van der Waals Heterostructures
Monolayer transition metal dichalcogenides (TMDs) are direct gap semiconductors where the optical properties are dominated by strongly interacting electron-hole quasi-particles. Understanding the interactions among these quasi-particles is crucial for advancing optoelectronic applications. Here, we examine the electrical tunability of light emission from the A and B excitons in monolayer MoS2 and MoS2/graphene heterostructures and unravel the competition between the A exciton to trion formation and charge transfer processes. Our results show significant gate-tunable quenching of the photoluminescence intensity from A excitons with notable differences due to charge transfer in the heterostructure. Furthermore, we observe a distinct superlinear correlation between the A exciton photoluminescence intensity and high doping levels in MoS2, which continues until the density of photoexcited excitons exceeds and saturates the free carrier density. This phenomenon ceases to occur in MoS2/graphene, where MoS2 remains almost undoped across all values of the applied external voltage. In contrast, the B exciton photoluminescence is unaffected by doping in MoS2, while it decreases analogously to that of the A excitons in the MoS2/graphene heterostructure, indicating the relevance of gate-tunable charge transfer from hot electrons before any internal recombination.
- 15 May 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (20) , 19027-19034
Open AccessTunable Exciton Modulation and Efficient Charge Transfer in MoS2/Graphene van der Waals Heterostructures
Monolayer transition metal dichalcogenides (TMDs) are direct gap semiconductors where the optical properties are dominated by strongly interacting electron-hole quasi-particles. Understanding the interactions among these quasi-particles is crucial for advancing optoelectronic applications. Here, we examine the electrical tunability of light emission from the A and B excitons in monolayer MoS2 and MoS2/graphene heterostructures and unravel the competition between the A exciton to trion formation and charge transfer processes. Our results show significant gate-tunable quenching of the photoluminescence intensity from A excitons with notable differences due to charge transfer in the heterostructure. Furthermore, we observe a distinct superlinear correlation between the A exciton photoluminescence intensity and high doping levels in MoS2, which continues until the density of photoexcited excitons exceeds and saturates the free carrier density. This phenomenon ceases to occur in MoS2/graphene, where MoS2 remains almost undoped across all values of the applied external voltage. In contrast, the B exciton photoluminescence is unaffected by doping in MoS2, while it decreases analogously to that of the A excitons in the MoS2/graphene heterostructure, indicating the relevance of gate-tunable charge transfer from hot electrons before any internal recombination.
- Open Access
- 6 January 2025
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 420
Facile synthesis of palladium hydride via ionic gate-driven protonation using a deep eutectic solvent
- 6 January 2025
- Published by Elsevier in Journal of Molecular Liquids
- Vol. 420
Open AccessFacile synthesis of palladium hydride via ionic gate-driven protonation using a deep eutectic solvent
- Open Access
- 8 February 2024
- Published by IOP Publishing in 2D Materials
- Vol. 11 (2) , 025017
Monolayer WS2 electro- and photo-luminescence enhancement by TFSI treatment
Layered material heterostructures (LMHs) can be used to fabricate electroluminescent devices operating in the visible spectral region. A major advantage of LMH-based light emitting diodes (LEDs) is that electroluminescence (EL) emission can be tuned across that of different exciton complexes (e.g. biexcitons, trions, quintons) by controlling the charge density. However, these devices have an EL quantum efficiency as low as ∼10−4%. Here, we show that the superacid bis-(triuoromethane)sulfonimide (TFSI) treatment of monolayer WS2-LEDs boosts EL quantum efficiency by over one order of magnitude at room temperature. Non-treated devices emit light mainly from negatively charged excitons, while the emission in treated ones predominantly involves radiative recombination of neutral excitons. This paves the way to tunable and efficient LMH-based LEDs.
- 8 February 2024
- Published by IOP Publishing in 2D Materials
- Vol. 11 (2) , 025017
Open AccessMonolayer WS2 electro- and photo-luminescence enhancement by TFSI treatment
Layered material heterostructures (LMHs) can be used to fabricate electroluminescent devices operating in the visible spectral region. A major advantage of LMH-based light emitting diodes (LEDs) is that electroluminescence (EL) emission can be tuned across that of different exciton complexes (e.g. biexcitons, trions, quintons) by controlling the charge density. However, these devices have an EL quantum efficiency as low as ∼10−4%. Here, we show that the superacid bis-(triuoromethane)sulfonimide (TFSI) treatment of monolayer WS2-LEDs boosts EL quantum efficiency by over one order of magnitude at room temperature. Non-treated devices emit light mainly from negatively charged excitons, while the emission in treated ones predominantly involves radiative recombination of neutral excitons. This paves the way to tunable and efficient LMH-based LEDs.