YHYaowu He

Yaowu He

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yaowu He has a total of 206 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Direct Smectic K Phase Formation for Uniform Organic Transistors via Molecular Asymmetric Anchoring Strategies

    by Xiwei Zheng, Jiatong Liu, Hongyang Li, Zeyi Yan, Wenbo Peng, Jianing Wang, Xiaopeng Zhang, Minming Yan, Hao Yan, Meili Xu, et al.

    Controlling molecular order and film continuity during deposition is important for reproducible organic field‐effect transistors (OFETs). Here, we report C10‐BTBT‐PO8OP, an asymmetric BTBT semiconductor combining a phenoxy‐octyloxyphenyl anchor group with an n‐decyl chain. The compound exhibits a cooling sequence assigned to SmA–SmC–SmK and forms ordered thin films by vacuum deposition without post‐deposition annealing. Compared with BTBT‐PO8OP, it shows more extensive first‐layer coverage and better‐resolved diffraction features in both the in‐plane and out‐of‐plane directions. Room‐temperature‐deposited OFETs based on C10‐BTBT‐PO8OP exhibit an average hole mobility of 2.40 ± 0.18 cm 2 V −1 s −1 , accompanied by a narrower threshold‐voltage distribution. The same transistor architecture also supports high‐gain UV photoresponse, accompanied by slow relaxation after illumination. These results connect asymmetric anchor–alkyl substitution to ordered film growth and reproducible transistor operation, establishing a molecular design strategy for transistor‐type devices that require no post‐deposition annealing.

  • Open Access

    Beyond State of Charge: Electrochemical States and Trajectory Design in Organic Mixed Conductors

    by Zhenyuan Mei, Yaowu He, Hong Meng

    Organic mixed ionic–electronic conductors (OMIECs) couple electronic redox, ion transport, solvation, structural reorganization, and mechanics, enabling diverse electrochemical functions but making their internal states poorly represented by scalar descriptors such as voltage, charge, conductivity, or nominal doping level. This Review establishes a state‐centered framework that treats electrochemical operation as the writing, observation, reconstruction, and design of multidimensional, history‐dependent state trajectories. A problem‐specific minimal sufficient state basis is introduced to distinguish essential from redundant coordinates, while waveform history and spatial heterogeneity define when lumped descriptions remain valid. Optical, electrical, ion‐specific, gravimetric, structural, mechanical, and temporal readouts are analyzed as selective projections whose complementarity determines state observability and hidden‐state reconstruction. Within this framework, congruence, kinetic ordering, decoupling, observational degeneracy, and mapping drift become experimentally testable relationships rather than isolated phenomena. Electrochromics, organic electrochemical transistors (OECTs), electrochemical memories, actuators, reconfigurable systems, and energy‐storage and conversion devices are then recast as technologies that select different trajectories through a shared electrochemical‐state landscape. The framework ultimately connects molecular structure, electrolyte, morphology, device architecture, and driving protocol to the inverse design of observable, controllable, reversible, and durable electrochemical trajectories.

  • Anchoring-Induced Interfacial Stabilization in Triphenylamine-Based Electrochromic Polymers

    by Dongwen Zou, Ying Cui, Shunyu Wang, Hao Sun, Hongyang Li, Yaowu He, Hong Meng

    Interfacial instability between electrochromic polymers and transparent conductive electrodes remains a major challenge for achieving durable electrochromic devices. Herein, two triphenylamine−fluorene conjugated polymers, TFPA and TFPACA, are synthesized by incorporating phosphonic acid or dual phosphonic acid/carboxylic acid anchoring groups into the polymers. This anchoring strategy strengthens polymer/ITO interfacial interactions, enhances film adhesion, suppresses interfacial defects, and promotes more uniform charge injection and extraction during electrochemical operation. Both polymers exhibit reversible electrochromic behavior, while the dual-anchored TFPACA-based devices deliver a high optical contrast (ΔT) of 45.08%, a coloration efficiency (CE) of 559.7 cm2 C−1, and excellent cycling stability, retaining 86% of the initial optical contrast after 3500 switching cycles. Building energy consumption simulations further indicate an annual energy reduction of 103,319.23 kWh, corresponding to a carbon emission reduction of approximately 51.66 kg CO2. These results highlight anchoring-induced interfacial engineering as an effective strategy for developing high-performance and durable electrochromic polymers.

  • Decoupling Electrochromism and Photoprotection via Side-Chain Engineering Enables Intrinsically UV-Stable Neutral Black Smart Windows

    by Yu Cai, Siqin Sun, Zhenyuan Mei, Yudan Liang, Shunyu Wang, Yaowu He, Hong Meng

    Electrochromic smart windows offer a promising route for dynamic solar regulation and building energy savings, yet their practical deployment is hindered by the intrinsic instability of conjugated polymers under ultraviolet (UV) irradiation. In particular, neutral black electrochromic systems rely on highly delocalized donor–acceptor backbones for broadband light absorption, which simultaneously increases their susceptibility to photodegradation, resulting in a fundamental trade-off between optical performance and environmental stability. Here, we present a generalizable side-chain engineering strategy to decouple electrochromic functionality and photoprotection at the molecular level. By covalently incorporating benzotriazole units into the side chains, the resulting polymer enables intrinsic UV screening while preserving the conjugated backbone responsible for panchromatic visible-light modulation. This decoupled design maintains the neutral black electrochromic behavior without compromising optical performance. The corresponding electrochromic device exhibits fast switching (0.77/0.74 s), high coloration efficiency (956 cm2 C–1), and excellent cycling stability (>11,400 cycles). Notably, the device retains over 90% of its initial optical contrast after prolonged UV irradiation, demonstrating significantly enhanced photostability. Beyond material-level performance, thermal experiments and building energy simulations reveal effective suppression of solar heat gain, reduced indoor temperature rise, and decreased cooling demand. This work establishes a general design principle for integrating intrinsic photoprotection and electrochromic functionality, providing a viable pathway toward durable and energy-efficient smart-window technologies.

  • Cross-Scale Mixed Conduction in Organic Electrochemical Transistors: From Nanoscale Ion–Electron Coupling to Biointegrated Intelligence

    by Zhenyuan Mei, Yaowu He, Hong Meng

    Organic electrochemical transistors (OECTs) are emerging at the convergence of nanoscience, soft materials, and bioelectronics because they couple the ionic signals of living systems with amplified electronic readout through hydrated organic mixed ionic–electronic conductors (OMIECs). Their performance, however, is governed not by low-voltage operation or high transconductance alone, but by coupled ionic, electronic, structural, and interfacial dynamics across multiple length scales. This Review examines OECTs as cross-scale mixed-conduction systems in which molecular structure and hydrated nanoscale organization determine gain, speed, noise, hysteresis, drift, and long-term biointerface stability. We first clarify how transconductance, volumetric capacitance, μC*, response dynamics, and reliability metrics should be interpreted under defined geometries, electrolytes, gate materials, bias windows, and operating histories. We then discuss molecular and morphological design principles for p-type, n-type, and ambipolar OMIECs, emphasizing the balance among electronic order, ion accessibility, redox stability, hydration, and structural reversibility. Particular attention is given to water and electrolytes as active design variables, operando characterization as an evidence chain connecting ion distributions with morphology and transport, and nano/biointerfaces as dynamic environments that feed back into device operation. Finally, device architectures, flexible and implantable systems, neuromorphic functions, and data-driven discovery are integrated to outline design principles for reliable, predictive, and biointegrated OECT technologies.

  • Molecular Valve Engineering Enables Uniform and Low‐Emission Electrochromic Smart Windows

    by Zhenyuan Mei, Zizheng Tong, Zijin Xu, Chunyu Xu, Yu Cai, Yutong Zhang, Yaowu He, Hong Meng

    Electrochromic smart windows hold great promise for energy‐efficient buildings, yet they often suffer from non‐uniform electrochemical doping and undesirable light emission under strong illumination. Here, we report a molecular valve engineering strategy by incorporating photoresponsive side chains into conjugated polymers to regulate both ion transport and excited‐state energy dissipation. Upon activation, the polymer undergoes a structural transformation that modifies the local polarity and ion‐associated microenvironment, while promoting nonradiative decay pathways. As a result, the electrochromic devices exhibit highly uniform coloration behavior and suppressed emission intensity compared to control systems. The optimized devices further demonstrate multicolor modulation and dual‐band optical regulation in the visible and near‐infrared regions. When applied in building simulations, the smart windows enable a temperature reduction of 5.05°C and an energy saving of 15.3 kWh m −2 . This work provides a molecular design strategy for achieving uniform and low‐emission electrochromic systems for smart window applications.

  • Enhanced Fast Switching of Viologen‐Based Electrochromics Using Hybrid Electrolytes

    by Ying Ma, Xiaopeng Zhang, Hongyang Li, Tianhe Xu, Jingyan Liu, Lintao Zeng, Yaowu He, Hong Meng

    Among various electrochromic materials for electrochromic devices (ECDs), viologens are particularly attractive owing to their intense optical contrast, stable redox behavior, and low operating voltages. Recent progress in this field has primarily centered on modifying molecular structures and designing confinement architectures to enhance performance, yet it remains comparatively underexplored in viologen ECDs. Herein, we demonstrate viologen‐based electrochromic devices incorporating a 1,2‐dimethoxyethane/dioxolane (DME/DOL) mixed solvent, which exhibit improved optical contrast and faster coloration/bleaching kinetics compared with devices using conventional electrolytes. The DME/DOL hybrid electrolyte system enables faster ion diffusion and reduced charge transfer resistance, confirmed through chronoamperometry analysis and electrochemical impedance spectroscopy. 7 Li NMR spectrum and electrostatic potential (ESP) analysis reveal stronger lithium ion shielding and more extensive negative electrostatic potential distribution around viologen species in DME/DOL, facilitating lithium ions diffusion for efficient charge compensation during redox switching. This work highlights hybrid electrolyte engineering as a powerful strategy to optimize viologen electrochromic devices for fast switching and explained mechanism based on experimental results combined with computational analysis, which can inform the development of next‐generation solution‐processed optical functional materials and devices.

  • All-in-One Complementary Electrochromism for Ultra-Stable Broadband Smart Windows

    by Zhenyuan Mei, Yu Cai, Zizheng Tong, Dongwen Zou, Hongyang Li, Jingyan Liu, Meimei Zhu, Yudan Liang, Hong Meng, Yaowu He

    We report a broadband, high-contrast electrochromic system based on two newly designed triphenylamine (TPA) derivatives, NMTPDA and MMTPDA, bearing electron-withdrawing and electron-donating substituents. These substituents modulate the HOMO-LUMO energy levels and stabilize oxidized radical cations, enabling efficient charge transfer and spectral tuning. Together with ethyl viologen, the materials were integrated into a monolithic liquid-phase electrolyte to construct a complementary anodic-cathodic electrochromic device. This "all-in-one" architecture minimizes interfacial resistance and supports multistep redox transitions, enabling broadband visible-to-NIR modulation. The devices exhibit up to 93.8% optical contrast, fast switching times, and excellent cycling stability (0.77% degradation after 14,000 cycles). Stabilized ion-pairing (CIP/SIP) structures contribute to long-term durability. Infrared imaging and DeST-based energy simulations demonstrate that smart windows employing these devices achieve up to 3.8 °C cooling and annual energy savings of 13.76 kWh m-2. These benefits stem from synergistic optical filtering and thermal shielding. This work offers an integrated strategy spanning molecular design, device engineering, and building energy modeling for next-generation smart windows.


  • All-Solid-State Transparent-to-Black Electrochromic Smart Window for Building Energy Saving

    by Hongyang Li, Xiaopeng Zhang, Meimei Zhu, Dongwen Zou, Jingyan Liu, Meili Xu, Yaowu He, Hong Meng