Rasmika H. Patel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Rasmika H. Patel has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Kaushal S. Patel
Sardar Patel University
3 shared publications- Priyank H. Kachhia
Sardar Patel University
3 shared publications - Bhavesh N. Socha
Department of Materials Science, Sardar Patel University, Vallabh Vidyanagar-388120, Gujarat, India
2 shared publications H. B. Patel
Department of Materials Science , Sardar Patel University , Vallabh Vidyanagar, Gujarat, India
2 shared publicationsM. D. Shah
Department of Materials Science , Sardar Patel University , Vallabh Vidyanagar, Gujarat, India
2 shared publications- Mohammed Dawood Alalawy
Department of Physics Faculty of Education & Science Albaydha University Al Bayda Yemen
2 shared publications
Latest Publications
- 15 January 2022
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1255, 132426
Qualitative and quantitative contributions of intermolecular interactions of dinuclear Ag complexes of sulfathiazole and sulfadiazine: X-ray crystallographic, Hirshfeld surface analysis, DFT studies and biological activities
- 15 January 2022
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1255, 132426
Qualitative and quantitative contributions of intermolecular interactions of dinuclear Ag complexes of sulfathiazole and sulfadiazine: X-ray crystallographic, Hirshfeld surface analysis, DFT studies and biological activities
- 13 December 2021
- Published by Taylor & Francis in Materials Research Innovations
- Vol. 26 (7) , 397-404
Influence of Ni-Al Nanoparticle on the Properties of PMMA/Ni-Al Layered Double Hydroxides based Nanocomposites
The layered double hydroxide has been synthesised by the co-precipitation method at constant pH 8–9. FTIR analysis and X-ray diffraction technique show a single LDH phase and an anisotropic growth of very small crystallites. The crystal structure of the material is hexagonal, as confirmed from XRD analysis. TEM analysis reveals Ni-Al OLDH aggregates are in fibril form, having lengths 20–70 nm. The SEM study reveals that the loading of the OLDH particle above 3% has increased the rate of agglomerations in nanocomposites. The presence of anions in the interlayer space and OH groups have been found out using IR spectroscopic technique. TGA showed that the thermal stability of PMMA/Ni-Al OLDH nanocomposites have increased as the weight percentage of OLDH is increased; consequently, the value of capacitance also showed enhancement. The mechanical analysis has suggested that the addition of OLDH particles has increased the tensile strength by 15–17% and flexural strength by 20–25%.
- 13 December 2021
- Published by Taylor & Francis in Materials Research Innovations
- Vol. 26 (7) , 397-404
Influence of Ni-Al Nanoparticle on the Properties of PMMA/Ni-Al Layered Double Hydroxides based Nanocomposites
The layered double hydroxide has been synthesised by the co-precipitation method at constant pH 8–9. FTIR analysis and X-ray diffraction technique show a single LDH phase and an anisotropic growth of very small crystallites. The crystal structure of the material is hexagonal, as confirmed from XRD analysis. TEM analysis reveals Ni-Al OLDH aggregates are in fibril form, having lengths 20–70 nm. The SEM study reveals that the loading of the OLDH particle above 3% has increased the rate of agglomerations in nanocomposites. The presence of anions in the interlayer space and OH groups have been found out using IR spectroscopic technique. TGA showed that the thermal stability of PMMA/Ni-Al OLDH nanocomposites have increased as the weight percentage of OLDH is increased; consequently, the value of capacitance also showed enhancement. The mechanical analysis has suggested that the addition of OLDH particles has increased the tensile strength by 15–17% and flexural strength by 20–25%.
- 15 October 2021
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 732 (1) , 87-101
Synthesis, crystallographic investigation, DFT studies and Hirshfeld surface analysis of novel bromo hydrazine derivative: (E)-2-(2-bromo-4,5-dimethoxybenzilidene)-1-(4,5-dimethoxy-2-methylphenyl)-1-hydroxyhydrazine
A novel bromo hydrazine derivative: (E)-2-(2-bromo-4,5-dimethoxybenzilidene)-1-(4,5-dimethoxy-2-methylphenyl)-1-hydroxyhydrazine is synthesized and characterized by different relevant techniques. The Optical bonding conformed using 1H NMR spectroscopic and Uv-vis studies. The crystallographic data confirmed that the bromo hydrazine derivative crystalizes in monoclinic space group P21/n and consists of bromo dimethoxy phenyl ring and methyl dimethoxy phenyl ring interlinked to each other via hydrazide moiety. The molecular geometry, HOMO-LUMO (frontier molecular orbital) energies, Molecular electrostatic potential (MEP), MPA (Mulliken population analysis), NBO (natural bond orbital), hypercharge polarizability of the title compound has been explored using Density Functional Theory (DFT) calculation via B3LYP method with LAV2P** basis set. Moreover, to visualize the intermolecular interactions and their distribution over the crystal structure, Hirshfeld surfaces and 3D energy framework analyses have been investigated using Crystal Explorer 17.5. In the absence of conventional forces, the weak but collective contribution of C-H…O/N/Br interactions along with direction specific π…π, C-H…π interaction having highest contribution from dispersion energy responsible for molecular stability. Lipophilicity index (log P value) represents significant biological activity of the molecule, correlates well with the contribution of C-H…π interaction. The probable binding modes between title molecule with different active sites of S. aureus (PDB code: 4ALI), E. coli (PDB code: 1QG6), colon cancer (PDB code: 2hq6), lung cancer (PDB code: 1x2j) and 1BNA (DNA) receptors are investigated by molecular docking studies using ArgusLab software.
- 15 October 2021
- Published by Taylor & Francis in Molecular Crystals and Liquid Crystals
- Vol. 732 (1) , 87-101
Synthesis, crystallographic investigation, DFT studies and Hirshfeld surface analysis of novel bromo hydrazine derivative: (E)-2-(2-bromo-4,5-dimethoxybenzilidene)-1-(4,5-dimethoxy-2-methylphenyl)-1-hydroxyhydrazine
A novel bromo hydrazine derivative: (E)-2-(2-bromo-4,5-dimethoxybenzilidene)-1-(4,5-dimethoxy-2-methylphenyl)-1-hydroxyhydrazine is synthesized and characterized by different relevant techniques. The Optical bonding conformed using 1H NMR spectroscopic and Uv-vis studies. The crystallographic data confirmed that the bromo hydrazine derivative crystalizes in monoclinic space group P21/n and consists of bromo dimethoxy phenyl ring and methyl dimethoxy phenyl ring interlinked to each other via hydrazide moiety. The molecular geometry, HOMO-LUMO (frontier molecular orbital) energies, Molecular electrostatic potential (MEP), MPA (Mulliken population analysis), NBO (natural bond orbital), hypercharge polarizability of the title compound has been explored using Density Functional Theory (DFT) calculation via B3LYP method with LAV2P** basis set. Moreover, to visualize the intermolecular interactions and their distribution over the crystal structure, Hirshfeld surfaces and 3D energy framework analyses have been investigated using Crystal Explorer 17.5. In the absence of conventional forces, the weak but collective contribution of C-H…O/N/Br interactions along with direction specific π…π, C-H…π interaction having highest contribution from dispersion energy responsible for molecular stability. Lipophilicity index (log P value) represents significant biological activity of the molecule, correlates well with the contribution of C-H…π interaction. The probable binding modes between title molecule with different active sites of S. aureus (PDB code: 4ALI), E. coli (PDB code: 1QG6), colon cancer (PDB code: 2hq6), lung cancer (PDB code: 1x2j) and 1BNA (DNA) receptors are investigated by molecular docking studies using ArgusLab software.
- 5 May 2020
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2220 (1) , 080015
One-pot synthesis of polyether urethane and its nanocomposite
In this work, the synthesis of liner polyether urethane and fabrication of its nanocomposite has been done. The synthesis of polyether urethane (PEU) was carried out by reacting polypropylene glycol with neopentyl glycol in presence of MEK to get polyether polyol and after completing this process, isophorone diisocyanate was added to the synthesized polyether polyol for synthesis of polyether urethane. Physico-chemical properties of polyether polyol were determined by measuring hydroxyl number and intrinsic viscosity of polymers. For determination of functional groups and molecular weights, FTIR and GPC were used. Modification of montmorillonite clay was done using organic modifier. The interlayer distance between to silicate layers was determined using X-ray diffractometer. Then this modified clay was used to prepare nanocomposites through intercalation method. Polyether urethane and its nanocomposite have been used for coating and casting. Thermal stability of polyurethane has been determined using thermogravimetric analysis. Mechanical properties such as pencil hardness, scratch hardness, adhesion and flexibility of coated panels and tensile strength of casted films have been found out.
- 5 May 2020
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2220 (1) , 080015
One-pot synthesis of polyether urethane and its nanocomposite
In this work, the synthesis of liner polyether urethane and fabrication of its nanocomposite has been done. The synthesis of polyether urethane (PEU) was carried out by reacting polypropylene glycol with neopentyl glycol in presence of MEK to get polyether polyol and after completing this process, isophorone diisocyanate was added to the synthesized polyether polyol for synthesis of polyether urethane. Physico-chemical properties of polyether polyol were determined by measuring hydroxyl number and intrinsic viscosity of polymers. For determination of functional groups and molecular weights, FTIR and GPC were used. Modification of montmorillonite clay was done using organic modifier. The interlayer distance between to silicate layers was determined using X-ray diffractometer. Then this modified clay was used to prepare nanocomposites through intercalation method. Polyether urethane and its nanocomposite have been used for coating and casting. Thermal stability of polyurethane has been determined using thermogravimetric analysis. Mechanical properties such as pencil hardness, scratch hardness, adhesion and flexibility of coated panels and tensile strength of casted films have been found out.
- 1 September 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (11) , 115619
Effect of hybrid reinforcement of carbon fiber and stable particles on pitch based carbon carbon composites
Carbon matrix carbon (c/c) composites were investigated to study the effect of incorporating stable particulate reinforcement along with chopped carbon fibers to check the effect of hybrid reinforcement. Robust c/c composites were fabricated by isotropic petroleum pitch matrix in single-step carbonization without re-impregnation process. Dense and rigid composites with density ranging from 1.65-1.75 g/cm3 were developed. Distinctive properties comprising coefficient of friction, coefficient of thermal expansion, high temperature dimensional and weight stability, shrinkage, hardness, weight loss, breaking energy and compressive strength were assessed and compared with the reference c/c composite. Secondary stable additives such as silicon carbide, molybdenum di-silicide, graphite, CNT, fly ash and alumina were added 5% by weight in the composites. Specimens containing advanced ceramic particles showed appreciable improvement in hardness, thermal, and mechanical response while composites with fly ash and graphite addition showed the converse effects. From the research, we were able to alter the properties and tailor them according to the application such as compression and friction coefficient was improved to have application in brake discs for automobiles. Also, the thermal shielding has been improved by incorporating thermally dormant material such as fly ash and Incorporation of hard and stable reinforcement has brought about noticeable changes consequently hybrid reinforcement improved the overall performance of the material even after ablation in oxy-acetylene flames.
- 1 September 2019
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (11) , 115619
Effect of hybrid reinforcement of carbon fiber and stable particles on pitch based carbon carbon composites
Carbon matrix carbon (c/c) composites were investigated to study the effect of incorporating stable particulate reinforcement along with chopped carbon fibers to check the effect of hybrid reinforcement. Robust c/c composites were fabricated by isotropic petroleum pitch matrix in single-step carbonization without re-impregnation process. Dense and rigid composites with density ranging from 1.65-1.75 g/cm3 were developed. Distinctive properties comprising coefficient of friction, coefficient of thermal expansion, high temperature dimensional and weight stability, shrinkage, hardness, weight loss, breaking energy and compressive strength were assessed and compared with the reference c/c composite. Secondary stable additives such as silicon carbide, molybdenum di-silicide, graphite, CNT, fly ash and alumina were added 5% by weight in the composites. Specimens containing advanced ceramic particles showed appreciable improvement in hardness, thermal, and mechanical response while composites with fly ash and graphite addition showed the converse effects. From the research, we were able to alter the properties and tailor them according to the application such as compression and friction coefficient was improved to have application in brake discs for automobiles. Also, the thermal shielding has been improved by incorporating thermally dormant material such as fly ash and Incorporation of hard and stable reinforcement has brought about noticeable changes consequently hybrid reinforcement improved the overall performance of the material even after ablation in oxy-acetylene flames.
- 31 August 2019
- Published by Elsevier in Materials Today: Proceedings
- Vol. 18, 1548-1555
Studies on Influence of the Size of Waterborne Polyurethane Nanoparticles on Coating Performance
- 31 August 2019
- Published by Elsevier in Materials Today: Proceedings
- Vol. 18, 1548-1555
Studies on Influence of the Size of Waterborne Polyurethane Nanoparticles on Coating Performance
- 31 August 2019
- Published by Elsevier in Materials Today: Proceedings
- Vol. 18, 1291-1296
Studies on the High Thermal Conduction Fluid by Incorporating CuO Nanoparticles in a Liquid Coolant
- 31 August 2019
- Published by Elsevier in Materials Today: Proceedings
- Vol. 18, 1291-1296
Studies on the High Thermal Conduction Fluid by Incorporating CuO Nanoparticles in a Liquid Coolant
- 21 September 2018
- Published by Taylor & Francis in International Journal of Polymer Analysis and Characterization
- Vol. 24 (1) , 1-9
Studies on the effect of the size of waterborne polyurethane nanoparticles on properties and performance of coatings
Present research work was performed utilizing prepolymer mixing process and varying NCO:OH mole ratios. Waterborne polyurethane dispersions (WBPUs) were prepared from phosphorous containing polyester polyol and isophorone diisocyanate. These prepolymers were neutralized by triethylamine followed by the addition of optimized quantity of water. Diethylenetriamine was used as a chain extender. These WBPUs were further coated on mild steel panels, glass panels, and wood. Chemical structure was confirmed using instrumental methods. Microtrac particle size analyzer was used to analyze the particle size. An impact of the size of nanoparticles on the performance of coatings was explained by different testing methods.
- 21 September 2018
- Published by Taylor & Francis in International Journal of Polymer Analysis and Characterization
- Vol. 24 (1) , 1-9
Studies on the effect of the size of waterborne polyurethane nanoparticles on properties and performance of coatings
Present research work was performed utilizing prepolymer mixing process and varying NCO:OH mole ratios. Waterborne polyurethane dispersions (WBPUs) were prepared from phosphorous containing polyester polyol and isophorone diisocyanate. These prepolymers were neutralized by triethylamine followed by the addition of optimized quantity of water. Diethylenetriamine was used as a chain extender. These WBPUs were further coated on mild steel panels, glass panels, and wood. Chemical structure was confirmed using instrumental methods. Microtrac particle size analyzer was used to analyze the particle size. An impact of the size of nanoparticles on the performance of coatings was explained by different testing methods.
- 12 July 2018
- Published by Springer Nature in Polymer Bulletin
- Vol. 76 (3) , 1183-1198
Synthesis of diphosphorus-based polyurethane esters and their application in flame-retardant nanoclay coatings
- 12 July 2018
- Published by Springer Nature in Polymer Bulletin
- Vol. 76 (3) , 1183-1198
Synthesis of diphosphorus-based polyurethane esters and their application in flame-retardant nanoclay coatings
- 1 January 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1961 (1) , 030002
Synthesis and characterization of 2D graphene sheets from graphite powder
Graphene is 2D material composed of one atom thick hexagonal layer. This material has attracted great attention among scientific community because of its high surface area, excellent mechanical properties and conductivity due to free electrons in the 2D lattice. There are various approaches to prepare graphene nanosheets such as top-down approach where graphite exfoliation and nanotube unwrapping can be done. The bottom up approach involves deposition of hydrocarbon through CVD, epitaxial method and organo-synthesis etc.. In present studies top down approach method was used to prepare graphene. The graphite powder with around 20 µm to 150µm particle size was subjected to concentrated strong acid in presence of strong oxidizing agent in order to increase the d-spacing between layers which leads to the disruption of crystal lattice as confirmed by XRD (X’pert Philips). FT Raman spectra taken via (Renishaw InVia microscope) of pristine powder and Graphene oxide revealed the increase in D-band and reduction in G-Band. These exfoliated sheets have oxygen rich complexes at the surface of the layers as characterised by FTIR technique. The GO powder was ultrasonicated to prepare the stable suspension of Graphene. The graphene layers were observed under TEM (Philips Tecnai 20) as 2dimensional sheets with around 1µm sizes.
- 1 January 2018
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1961 (1) , 030002
Synthesis and characterization of 2D graphene sheets from graphite powder
Graphene is 2D material composed of one atom thick hexagonal layer. This material has attracted great attention among scientific community because of its high surface area, excellent mechanical properties and conductivity due to free electrons in the 2D lattice. There are various approaches to prepare graphene nanosheets such as top-down approach where graphite exfoliation and nanotube unwrapping can be done. The bottom up approach involves deposition of hydrocarbon through CVD, epitaxial method and organo-synthesis etc.. In present studies top down approach method was used to prepare graphene. The graphite powder with around 20 µm to 150µm particle size was subjected to concentrated strong acid in presence of strong oxidizing agent in order to increase the d-spacing between layers which leads to the disruption of crystal lattice as confirmed by XRD (X’pert Philips). FT Raman spectra taken via (Renishaw InVia microscope) of pristine powder and Graphene oxide revealed the increase in D-band and reduction in G-Band. These exfoliated sheets have oxygen rich complexes at the surface of the layers as characterised by FTIR technique. The GO powder was ultrasonicated to prepare the stable suspension of Graphene. The graphene layers were observed under TEM (Philips Tecnai 20) as 2dimensional sheets with around 1µm sizes.