Mohamed Abdel Meguid
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Mohamed Abdel Meguid has a total of 112 co-authors. Here are the top co-authors by number of shared publications:
- Ahmed Ibrahim
McGill University
5 shared publications - Hoang K. Dang
Department of Civil Engineering and Applied Mechanics McGill University 817 Sherbrooke Street West, Montreal Quebec Canada H3A 2K6
5 shared publications Luc E. Chouinard
Associate Professor, Civil Engineering and Applied Mechanics, McGill Univ., 817 Sherbrooke St. W., Montreal, QC H2A 0C3
5 shared publications- Daniele Malomo
Department of Civil Engineering, McGill University, Montreal, Canada
4 shared publications - Ge Gao
Graduate Student, Civil Engineering and Applied Mechanics, McGill Univ., 817 Sherbrooke St. W., Montreal, QC H3A 0C3. ORCID:
4 shared publications - Luc Chouinard
Civil Engineering Department, McGill University, Montreal, QC H3A 0G4, Canada
4 shared publications
Latest Publications
- Open Access
- 1 November 2026
- Published by Elsevier in Transportation Geotechnics
- Vol. 67
Numerical simulation of wicking nonwoven geotextiles embedded in unsaturated soil subgrade
- 1 November 2026
- Published by Elsevier in Transportation Geotechnics
- Vol. 67
Open AccessNumerical simulation of wicking nonwoven geotextiles embedded in unsaturated soil subgrade
- Open Access
- 27 October 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 548
Temperature-dependent shear bond strength of geosynthetics-reinforced masonry for climate-adapted structural repairs and retrofits in Eastern Canada
- 27 October 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 548
Open AccessTemperature-dependent shear bond strength of geosynthetics-reinforced masonry for climate-adapted structural repairs and retrofits in Eastern Canada
- Open Access
- 8 April 2026
- Published by Elsevier in Computers and Geotechnics
- Vol. 196
DEM modelling of the axial behaviour of underground pipelines buried in unsaturated coarse-grained soils
- 8 April 2026
- Published by Elsevier in Computers and Geotechnics
- Vol. 196
Open AccessDEM modelling of the axial behaviour of underground pipelines buried in unsaturated coarse-grained soils
- 7 April 2026
- Published by Emerald Publishing in Geosynthetics International
- Vol. 33 (3) , 527-540
Experimental and numerical study on flexural behaviour of geogrid-reinforced beams
The deterioration of non-structural concrete elements in harsh environments presents a significant concern, particularly in Canada’s cold regions. Conventional steel reinforcements are prone to corrosion, and anticipated climate changes, such as increased temperature fluctuations and freeze-thaw cycles, demand more durable alternatives to prevent premature cracking. This study investigates the use of low-ductility fibreglass geogrids and high-ductility polymeric geogrids to enhance the flexural performance of plain concrete beams. Twenty-one beams (550 mm × 150 mm × 150 mm) with varying reinforcement configurations were tested under four-point bending to assess load-deflection behaviour, mode-I fracture energy, and failure modes. Results showed that fibreglass geogrid reinforcement improved flexural stiffness by 40%, fracture energy by 11%–34%, and displacement capacity by 15%–45%, outperforming polymeric geogrids, which only enhanced deformation by 10%. Additionally, finite element models validated against experimental data were developed to examine the influence of temperature on fibreglass-reinforced beams. The models incorporated temperature-dependent material properties and evaluated midspan deflection and ultimate load under varying conditions. Findings revealed improved performance with decreasing temperatures (down to −30°C), with consistent cracking strength observed from 23°C to 60°C. This research highlights the promise of fibreglass geogrid reinforcement as a viable strategy for enhancing concrete durability in cold climate regions.
- 7 April 2026
- Published by Emerald Publishing in Geosynthetics International
- Vol. 33 (3) , 527-540
Experimental and numerical study on flexural behaviour of geogrid-reinforced beams
The deterioration of non-structural concrete elements in harsh environments presents a significant concern, particularly in Canada’s cold regions. Conventional steel reinforcements are prone to corrosion, and anticipated climate changes, such as increased temperature fluctuations and freeze-thaw cycles, demand more durable alternatives to prevent premature cracking. This study investigates the use of low-ductility fibreglass geogrids and high-ductility polymeric geogrids to enhance the flexural performance of plain concrete beams. Twenty-one beams (550 mm × 150 mm × 150 mm) with varying reinforcement configurations were tested under four-point bending to assess load-deflection behaviour, mode-I fracture energy, and failure modes. Results showed that fibreglass geogrid reinforcement improved flexural stiffness by 40%, fracture energy by 11%–34%, and displacement capacity by 15%–45%, outperforming polymeric geogrids, which only enhanced deformation by 10%. Additionally, finite element models validated against experimental data were developed to examine the influence of temperature on fibreglass-reinforced beams. The models incorporated temperature-dependent material properties and evaluated midspan deflection and ultimate load under varying conditions. Findings revealed improved performance with decreasing temperatures (down to −30°C), with consistent cracking strength observed from 23°C to 60°C. This research highlights the promise of fibreglass geogrid reinforcement as a viable strategy for enhancing concrete durability in cold climate regions.
- 15 March 2026
- Published by Springer Nature
- p. 55-65
Structural Retrofit of Eastern Canada’s Existing Masonry Using Geosynthetics: Preliminary Test Results
- 15 March 2026
- Published by Springer Nature
- p. 55-65
Structural Retrofit of Eastern Canada’s Existing Masonry Using Geosynthetics: Preliminary Test Results
- 5 November 2025
- Published by Elsevier in Reliability Engineering & System Safety
- Vol. 267
Evaluating the influence of climate change on the deterioration and bearing capacity of corroded gas pipelines
- 5 November 2025
- Published by Elsevier in Reliability Engineering & System Safety
- Vol. 267
Evaluating the influence of climate change on the deterioration and bearing capacity of corroded gas pipelines
- Open Access
- 15 October 2025
- Published by Springer Nature in Acta Geotechnica
- Vol. 21 (2) , 823-842
Cyclic and post-cyclic axial behaviors of steel pipelines buried in dense sand
The current design guidelines for underground pipelines do not consider cyclic axial soil-pipe interaction and its impact on post-cyclic pullout resistance, potentially leading to unsafe designs. This study conducted 12 large-scale physical model tests on steel pipes in dense sand to investigate their axial behavior during and after cyclic loading. A film-like sensor was employed to monitor soil-pipe interface contact pressure and earth pressure. The test program included different levels of pipe roughness, overburden pressure, and cyclic displacement. Given a cyclic displacement, the axial resistance in the first loading exceeds the guideline prediction, attributed to the increased interface contact pressures by constrained dilation. Subsequently, the axial resistance degrades over cycles. It stabilizes at a value that is roughness-dependent and smaller than the prediction because of the translation of the initial negative soil arching to positive soil arching on the pipe. The post-cyclic pullout resistance is smaller than the monotonic resistance without cycling when the cyclic displacement is relatively large (above 5 mm in this study). In contrast, the post-cyclic pullout resistance is above the monotonic resistance when the cyclic displacement is smaller due to cyclic loading-induced soil densification. The difference between post-cyclic and monotonic resistances for the rougher pipe is more significant.
- 15 October 2025
- Published by Springer Nature in Acta Geotechnica
- Vol. 21 (2) , 823-842
Open AccessCyclic and post-cyclic axial behaviors of steel pipelines buried in dense sand
The current design guidelines for underground pipelines do not consider cyclic axial soil-pipe interaction and its impact on post-cyclic pullout resistance, potentially leading to unsafe designs. This study conducted 12 large-scale physical model tests on steel pipes in dense sand to investigate their axial behavior during and after cyclic loading. A film-like sensor was employed to monitor soil-pipe interface contact pressure and earth pressure. The test program included different levels of pipe roughness, overburden pressure, and cyclic displacement. Given a cyclic displacement, the axial resistance in the first loading exceeds the guideline prediction, attributed to the increased interface contact pressures by constrained dilation. Subsequently, the axial resistance degrades over cycles. It stabilizes at a value that is roughness-dependent and smaller than the prediction because of the translation of the initial negative soil arching to positive soil arching on the pipe. The post-cyclic pullout resistance is smaller than the monotonic resistance without cycling when the cyclic displacement is relatively large (above 5 mm in this study). In contrast, the post-cyclic pullout resistance is above the monotonic resistance when the cyclic displacement is smaller due to cyclic loading-induced soil densification. The difference between post-cyclic and monotonic resistances for the rougher pipe is more significant.
- 30 September 2025
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 59 (2) , 2789-2809
Cemented Backfill Applications in Challenging Geothermal Environments: A Brief Review and Future Perspectives
- 30 September 2025
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 59 (2) , 2789-2809
Cemented Backfill Applications in Challenging Geothermal Environments: A Brief Review and Future Perspectives
- 15 August 2025
- Published by Emerald Publishing in Geosynthetics International
- Vol. 33 (1) , 109-124
Drainage performance of wicking geotextiles under rainfall and capillary rise conditions
Wicking geotextiles have been developed to overcome the limitations of conventional geotextiles in unsaturated soil conditions. Over the past decade, research has demonstrated the effectiveness of woven wicking geotextiles in draining capillary water and improving lateral drainage. However, the performance of nonwoven wicking geotextiles under different drainage conditions remains largely unexplored. This study assesses the effectiveness of nonwoven wicking geotextiles in various unsaturated soils using soil column and soil box tests to simulate capillary rise and rainfall, respectively. In the column test, clayey sand was used to evaluate capillary rise, while the box test examined two subgrade materials: Ottawa sand (well-draining) and clayey sand (poorly draining). Volumetric water content was monitored under three conditions: wicking geotextile, non-wicking geotextile, and a control with no geotextile. Results indicate that the wicking geotextile significantly restricts capillary rise, reducing it by around 100 mm in clayey sand columns. After rainfall, wicking geotextile prevents water accumulation above the geotextile and enhances drainage efficiency in both sand types, with superior performance in Ottawa sand. By limiting upward water movement and promoting effective drainage, the wicking geotextile mitigates moisture-induced instability risks in embankments, offering substantial advantages over conventional geotextiles for geotechnical drainage applications.
- 15 August 2025
- Published by Emerald Publishing in Geosynthetics International
- Vol. 33 (1) , 109-124
Drainage performance of wicking geotextiles under rainfall and capillary rise conditions
Wicking geotextiles have been developed to overcome the limitations of conventional geotextiles in unsaturated soil conditions. Over the past decade, research has demonstrated the effectiveness of woven wicking geotextiles in draining capillary water and improving lateral drainage. However, the performance of nonwoven wicking geotextiles under different drainage conditions remains largely unexplored. This study assesses the effectiveness of nonwoven wicking geotextiles in various unsaturated soils using soil column and soil box tests to simulate capillary rise and rainfall, respectively. In the column test, clayey sand was used to evaluate capillary rise, while the box test examined two subgrade materials: Ottawa sand (well-draining) and clayey sand (poorly draining). Volumetric water content was monitored under three conditions: wicking geotextile, non-wicking geotextile, and a control with no geotextile. Results indicate that the wicking geotextile significantly restricts capillary rise, reducing it by around 100 mm in clayey sand columns. After rainfall, wicking geotextile prevents water accumulation above the geotextile and enhances drainage efficiency in both sand types, with superior performance in Ottawa sand. By limiting upward water movement and promoting effective drainage, the wicking geotextile mitigates moisture-induced instability risks in embankments, offering substantial advantages over conventional geotextiles for geotechnical drainage applications.
- Open Access
- 9 August 2025
- Published by Elsevier in Geotextiles and Geomembranes
- Vol. 53 (6) , 1544-1557
Experimental and numerical investigation of the unsaturated behavior of conventional and wicking non-woven geotextiles
- 9 August 2025
- Published by Elsevier in Geotextiles and Geomembranes
- Vol. 53 (6) , 1544-1557
Open AccessExperimental and numerical investigation of the unsaturated behavior of conventional and wicking non-woven geotextiles