AGAlberto Gaxiola

Alberto Gaxiola

*This is an algorithmically generated author record based on publicly available information.

Alberto Gaxiola has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Performance and Prediction of Reference Evapotranspiration Using Seven Alternative Methods, in the State of Sinaloa, Mexico

    by Omar Llanes Cárdenas, Mariano Norzagaray Campos, Ernestina Pérez González, Jeován A. Ávila Díaz, Marco A. Arciniega Galaviz, Alberto Gaxiola, Román Edén Parra Galaviz

    Predicting reference evapotranspiration (ETo) is essential for calculating crop water requirements, especially when available data are limited. The goal was to evaluate the daily performance of seven alternative ETo methods (EToalti) and to predict annual accumulated ETo with the standard method of Penman–Monteith with limited data (EToPMP), in the state of Sinaloa, Mexico. From the National Water Commission and the National Meteorological Service (CONAGUA-SMN), daily data were obtained from 11 weather stations in Sinaloa for 1969–2018: maximum temperature, minimum temperature, and evaporation (Eva). Also, from the San Juan CONAGUA–SMN weather station, the following were obtained: wind speed, mean temperature, incident solar radiation, atmospheric pressure, and relative humidity. The seven EToalti calculated were Romanenko (EToRo), Priestley–Taylor (EToPT), McGuinness and Bordne (EToMB), Hargreaves (EToH75), pan Eva (EToTE), Hargreaves (EToH85), and Oudin (EToOu). Daily mean ETo of the data-limited Penman–Monteith method (EToPM) was calculated. The mean absolute error (MAE) and the root mean square error (RMSE) between EToPM and the seven EToalti were calculated. Using multiple linear and nonlinear regressions, EToPMP (dependent variable) was predicted using the seven EToalti (independent variables). In general, the EToalti with the best performance are EToTE (MAE from 0.360 mm day–1 to 2.294 mm day–1 and RMSE from 0.594 mm day−1 to 3.094 mm day–1). The EToalti least recommended are EToMB (MAE from 2.254 mm day−1 to 3.484 mm day–1 and RMSE from 2.948 mm day–1 to 4.437 mm day–1). EToPT was the only EToalti that contributed to the explanation of all models of EToPMP. This study provides mathematical models that can help make agricultural irrigation more efficient in the state considered “the breadbasket of Mexico.”

  • La biblioteca Morelos

    by Universidad Pedagógica del Estado de Sinaloa, Adán Lorenzo Apodaca Félix, Luis Alberto Lugo Gaxiola

    Cuando se habla y escribe sobre ciencia, educación y cultura, generalmente las referencias recaen sobre la escuela. La institución escolar, es considerada la instancia formal para proveer de esos tipos de referentes a las personas, esa es la consideración generalizada que se posee históricamente sobre ella. Esa representación le ha dado sentido y formalidad a la acción escolar a través de la historia. Esto es así, los hombres de ciencia, los seres humanos dotados de educación y con gran capital cultural, han adquirido mayormente esos bienes del saber en relación con las acciones que sobre esos temas se desarrollan en las instituciones educativas, muy pocos seres humanos en el mundo de nuestros días pueden estar distantes de los influjos escolares en sus procesos de asimilación de la ciencia, la educación y la cultura. Dualmente a esos procesos formales, existen otras instancias, quizá menos rígidas que las escuelas pero que también hacen sus cuotas de aportaciones en los ámbitos de la educación y la cultura. Son espacios que culturizan y educan pero poseen proyecciones mediáticas escasas, eso los hace aparecer como negados e invisisbilizados en algunos casos.

  • Open Access

    The Use of Recycled PET for the Synthesis of New Mechanically Improved PVP Composite Nanofibers

    by Manuel A. Gallardo-Sánchez, Manuel J. Chinchillas-Chinchillas, Alberto Gaxiola, Clemente G. Alvarado-Beltrán, Abel Hurtado-Macías, Víctor M. Orozco-Carmona, Jorge L. Almaral-Sánchez, Selene Sepúlveda-Guzmán, Andrés Castro-Beltrán

    Polyethylene terephthalate (PET) waste has become a major challenge for the conservation of the environment due to difficult degradation. For this reason, it is important to develop new recycling strategies for reusing this waste. In this work, the electrospinning technique was used to synthesize composite nanofibers of polyvinylpyrrolidone (PVP), recycling PET (RPET) that was obtained from the chemical recycling of postconsumer PET with glycolysis and styrene (ST) as a crosslinking agent. The polymer solutions were analyzed by viscosity and frequency sweeping, while the composite nanofibers were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis/differential scanning calorimetry (TGA/DSC), and nanoindentation to compare their properties. The PVP nanofibers presented an average diameter of 257 nm; the RPET/PVP and RPET/PVP/ST composite nanofibers had average diameters of 361 nm and 394 nm, respectively; and the modulus of elasticity and hardness of the RPET/PVP/ST composite nanofibers were 29 and 20 times larger, respectively, than those of the PVP nanofibers. With the synthesis of these composite nanofibers, a new approach to PET recycling is presented.


  • Open Access

    Sensitivity of Four Indices of Meteorological Drought for Rainfed Maize Yield Prediction in the State of Sinaloa, Mexico

    by Llanes-Cárdenas Omar, Norzagaray-Campos Mariano, Gaxiola Alberto, Pérez-González Ernestina, Montiel-Montoya Jorge, Troyo-Diéguez Enrique

    In the state of Sinaloa, rainfall presents considerable irregularities, and the climate is mainly semiarid, which highlights the importance of studying the sensitivity of various indices of meteorological drought. The goal is to evaluate the sensitivity of four indices of meteorological drought from five weather stations in Sinaloa for the prediction of rainfed maize yield. Using DrinC software and data from the period 1982–2013, the following were calculated: the standardized precipitation index (SPI), agricultural standardized precipitation index (aSPI), reconnaissance drought index (RDI) and effective reconnaissance drought index (eRDI). The observed rainfed maize yield (RMYob) was obtained online, through free access from the database of the Agrifood and Fisheries Information Service of the government of Mexico. Sensitivities between the drought indices and RMYob were estimated using Pearson and Spearman correlations. Predictive models of rainfed maize yield (RMYpr) were calculated using multiple linear and nonlinear regressions. In the models, aSPI and eRDI with reference periods and time steps of one month (January), two months (December–January) and three months (November–January), were the most sensitive. The correlation coefficients between RMYob and RMYpr ranged from 0.423 to 0.706, all being significantly different from zero. This study provides new models for the early calculation of RMYpr. Through appropriate planning of the planting–harvesting cycle of dryland maize, substantial socioeconomic damage can be avoided in one of the most important agricultural regions of Mexico.


  • Regional precipitation teleconnected with PDO-AMO-ENSO in northern Mexico

    by Omar Llanes-Cárdenas, Mariano Norzagaray-Campos, Alberto Gaxiola, Gabriel Eduardo González González


  • Evaluation of the mechanical properties, durability and drying shrinkage of the mortar reinforced with polyacrylonitrile microfibers

    by Manuel J. Chinchillas-Chinchillas, Víctor M. Orozco-Carmona, Alberto Gaxiola, Clemente G. Alvarado-Beltrán, Manuel J. Pellegrini-Cervantes, Francisco J. Baldenebro-López, Andrés Castro-Beltrán


  • Hydraulic, Volumetric, and Mechanical Approach in Asphalt Mixture Design for Impervious Barriers

    by Alberto Gaxiola, Alexandra Ossa

    Asphalt concrete has been used as an appropriate impervious barrier for water retention. The performance of asphalt concrete in dam cores, reservoir coatings, and canals is comparable with other existing alternatives. However, the methodology used to determine the amount of asphalt binder in the mixture is based on some experiences and recommendations; knowledge about the effect of the aggregate gradation on the permeability of asphalt concrete used in these barriers is limited. In this investigation, permeability and cracking susceptibility of asphalt concrete specimens made from different gradations and asphalt binder content are studied to propose a design method of asphalt mixtures for impervious barriers. Permeability tests under different conditions of hydraulic head and indirect tensile strength (ITS) tests were performed. As an outcome, for the materials used in this study, gradation limits were determined for pervious and impervious asphalt concrete. Considering that the mineral aggregate can have asphalt binder absorptions in a very wide range, it is proposed to use effective asphalt film thickness to determine the minimum asphalt binder content. It was found that the best performance of the mixture was achieved with an effective film thickness between 10 and 13 μm.


  • Effect of Water Exposure on the Physicochemical Properties of Impervious Asphalt Concrete

    by Alberto Gaxiola-Hernández, Alexandra Ossa-López

    Effect of water on asphalt concrete containing air voids in the range 3–5% (the typical composition used for the construction of pavements) has been widely studied. However, it is also necessary to evaluate the effect of water on mixtures with a low amount of air voids and high asphalt saturation (Va<3% and VFA>88% ; the typical mixture used in impervious barriers), as it is well known that contact with water causes slow oxidation of asphalt (binder), which makes it hard and brittle. In this research, asphalt concrete cylindrical specimens with a low air void content were prepared and saturated, and kept in contact with water for up to 12 months. Then, a process of asphalt recovery was performed on the specimens. Infrared spectroscopy, rheological analyses, and saturates, aromatics, resins, and asphaltenes (SARA) fractionation were performed to characterize the asphalt binder. It was revealed for the time periods considered in this study that the asphalt oxidation level was low, which can be attributed to low air void volumes and high asphalt saturation in the as-used mixture.


  • Open Access

    Laboratory determination of hydraulic anisotropy of dense graded asphalt concrete

    by Alberto Gaxiola-Hernández

    Dense graded asphalt concrete is widely used in roads as support structure for vehicle loads. However, it is also used for hydraulic purposes in canal linings as well as faces and cores of dams. In the design stage of these constructions, it is necessary to have the permeability data of the materials that will be used and, although in some cases it is sufficient to know this parameter in only one direction, in others it is necessary to have it in two directions. The parameter that indicates the ratio of the permeability coefficients between the axial and transverse direction is known as hydraulic anisotropy (A). There are studies that estimate A in asphalt concrete, however, there is no standard procedure to determine these results in the laboratory. This research presents test results of axial permeability in constant head permeameter and the design of a radial permeability test device in asphalt concrete made for hydraulic purposes. As a result, it was determined that the compaction process of asphalt concrete, applied in one direction, causes the material to have anisotropic behavior from the hydraulic point of view, resulting in anisotropy ratios from 7.1 to 10.4, for the studied asphalt mixture. This research is of paramount importance for engineers who design hydraulic structures of asphalt concrete since it provides them with a simple laboratory procedure to determine the hydraulic anisotropy of this material.