CNChul-Ho Noh

Chul-Ho Noh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chul-Ho Noh has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Development of protective schemes for hybrid AC/DC low-voltage distribution system

    by Chul-Ho Noh, Chul-Hwan Kim, Gi-Hyeon Gwon, Muhammad Omer Khan, Saeed Zaman Jamali


  • Open Access

    A High-Speed Fault Detection, Identification, and Isolation Method for a Last Mile Radial LVDC Distribution Network

    by Saeed Zaman Jamali, Syed Basit Ali Bukhari, Muhammad Omer Khan, Khawaja Khalid Mehmood, Muhammad Mehdi, Chul-Ho Noh, Chul-Hwan Kim

    The day-by-day increase in digital loads draws attention towards the need for an efficient and compatible distribution network. An LVDC distribution network has the capability to fulfill such digital load demands. However, the major challenge of an LVDC distribution network is its vulnerability during a fault. The need for a high-speed fault detection method is inevitable before it can be widely adopted. This paper proposes a new fault detection method which extracts the features of the current during a fault. The proposed fault detection method uses the merits of overcurrent, the first and second derivative of current, and signal processing techniques. Three different features are extracted from a time domain current signal through a sliding window. The extracted features are based upon the root squared zero, second, and fourth order moments. The features are then set with individual thresholds to discriminate low-, high-, and very high-resistance faults. Furthermore, a fault is located through the superimposed power flow. Moreover, this study proposes a new method based on the vector sum of positive and negative pole currents to identify the faulty pole. The proposed scheme is verified by using a modified IEEE 13 node distribution network, which is implemented in Matlab/Simulink. The simulation results confirm the effectiveness of the proposed fault detection and identification method. The simulation results also confirm that a fault having a resistance of 1 m Ω is detected and interrupted within 250 μ s for the test system used in this study.


  • Open Access

    Protection Scheme of a Last Mile Active LVDC Distribution Network with Reclosing Option

    by Saeed Zaman Jamali, Syed Basit Ali Bukhari, Muhammad Omer Khan, Muhammad Mehdi, Chul-Ho Noh, Gi-Hyeon Gwon, Chul-Hwan Kim

    A low voltage direct current (LVDC) distribution network is a promising technology to meet the standards of future energy demands for smart loads. An LVDC distribution network can not only supply efficient, smooth and clean energy, but also makes the integration of renewable energy resources in the distribution system easy. A major obstacle in the implementation of the LVDC distribution network is the protection of the network during abnormal grid conditions, such as transients and faults. This paper analyzes DC fault characteristics considering an LVDC distribution network, highlights the worst case scenario during a fault and protection related issues and proposes the protection schemes for the LVDC network. In the proposed protection scheme, a fault is detected and located through superimposed components. To minimize the effect of the DC fault on the distribution network, distributed fault current limiters are introduced and the final decision to disconnect or reconnect the affected line is made on the basis of the type of fault. In addition, a reclosing scheme for a temporary fault is proposed to avoid high inrush currents and false tripping, which eventually increases the reliability. A fast communication-based backup protection is also suggested, and to reduce dependency, a secondary backup is used in the case of communication delay or failure. The proposed scheme is verified using the modified IEEE 13 node test system, which is implemented in ATPDraw. The results show that the proposed scheme can successfully detect, locate and limit a DC fault in an LVDC distribution network with different fault resistances or locations. Moreover, the network is restored successfully in the case of temporary faults.


  • Open Access

    Erratum: Khan, M.O.; et al. A Load Flow Analysis for an AC/DC Hybrid Distribution Network Incorporated with Distributed Energy Resources for Different Grid Scenarios. Energies, 2018, 11, 367

    by Muhammad Omer Khan, Saeed Zaman Jamali, Chul-Ho Noh, Gi-Hyeon Gwon, Chul-Hwan Kim

    The authors wish to make the following changes to their paper

  • Open Access

    A Load Flow Analysis for AC/DC Hybrid Distribution Network Incorporated with Distributed Energy Resources for Different Grid Scenarios

    by Muhammad Omer Khan, Saeed Zaman Jamali, Chul-Ho Noh, Gi-Hyeon Gwon, Chul-Hwan Kim

    With the recent developments in power electronics technologies, increased deployment of distributed energy resources (DER) with DC output type at distribution voltage levels and significant increase in the number of sensitive AC and DC loads integrated in distribution network have enforced the traditional power network in the continuous renovation process. In this paper, the load flow solution of hybrid AC/DC distribution networks with the multi-terminal configuration is studied. The impact of voltage source converter (VSC) losses and AC and DC line losses in the presence of DER in the distribution system are assessed. The motivation of this analysis is to consider an increase in the number of converter stations which might result in non-negligible converter losses and the presence of various DER within the network imposing different network scenarios. The proposed schemes are simulated on two modified IEEE 33 bus hybrid AC/DC distribution network test system equipped with VSC-MTDC and the results are presented. Obtained results show that by considering the network losses and the converter losses with large number of converters within the network could lead to very different load flow solution and power transfer between networks, especially considering the AC or DC bus dominated network.


  • Voltage Regulation Method for Voltage Drop Compensation and Unbalance Reduction in Bipolar Low-Voltage DC Distribution System

    by Tack-Hyun Jung, Gi-Hyeon Gwon, Chul-Hwan Kim, Joon Han, Yun-Sik Oh, Chul-Ho Noh

    Owing to the development of highly efficient electric power converters, the number of studies on the construction of low-voltage dc (LVDC) systems is gradually increasing. To use LVDC distribution systems, voltage regulation methods to compensate for the voltage drop and to limit the voltage unbalance are essential. In a bipolar LVDC distribution system, a voltage drop and voltage unbalance could occur because of the load current and the variation in the amount of power supplied to the poles. However, not enough research has been conducted on voltage regulation methods for LVDC distribution systems. To reduce the voltage drop and the voltage unbalance, this paper proposes a voltage regulation method based on the neutral to line drop compensation (NLDC) method, which employs a modified LDC to calculate the sending-end reference voltage. In the NLDC method, the neutral current and neutral line impedance are taken into consideration to compensate for the neutral line potential fluctuation and voltage drop on the pole. The next sending-end voltage is determined by checking the voltage unbalance factor, and it is adjusted to maintain it within the allowable voltage unbalance factor. A voltage regulation algorithm and a bipolar LVDC system model are implemented using the Electromagnetic Transients Program.


  • Open Access

    A study on applicability of Prony’s method to the analysis of the fault characteristics in low voltage DC distribution system

    by Chul-Ho Noh, Joon Han, Yun-Sik Oh, Gi-Hyeon Gwon, Jong-Il Song, Chul-Hwan Kim

    As an area of interest in energy efficiency in power systems, low voltage DC (LVDC) distribution system has elicited attention as a potential solution. This system is closely associated with the increase of distributed generations, as well as digital loads. Until now, however, the related standards and research remain insufficient to commercialize the LVDC distribution system. In particular, the establishment of the protection schemes for LVDC distribution systems is the primary task because it can affect the overall aspects, including reliability of the system. For the establishment of reliable protection schemes, the fault characteristics of LVDC distribution system must be identified precisely in a practical system. Thus, this paper shows that Prony’s method can be used to analyze the fault characteristics of LVDC distribution system. For this purpose, the fault characteristics are theoretically analyzed first. The analysis results are then verified by using ElectroMagnetic Transients Program (EMTP) and MATLAB®.

  • Open Access

    Recent Trends in Renewable Energy Resources for Power Generation in the Republic of Korea

    by Chul-Ho Noh, Insu Kim, Won-Hyeok Jang, Chul-Hwan Kim

    The global demand for renewable energy in recent decades has continued to increase, despite adverse economic conditions such as world economic recessions, trade disputes, and falls in gas and oil prices. During this period, the United States and Europe have led the development of renewable energy technologies, but now emerging countries such as China, Brazil, India, and the Republic of Korea are also been actively participating in developing and deploying renewable energy. For example, since 1989, the Korea Electric Power Corporation has built a well-known test site for the application of renewable energy resources, including 500 kW photovoltaic systems with smooth integration into power grids in the Gochang area. The main objects of this study are (1) to review the recent trends in renewable energy systems, including solar, wind, bioenergy, hydroelectric, and tidal power, for electric power generation developed in Korea and (2) to introduce the test sites in Korea. For this purpose, this study examines the current activities of industry and government in Korea and compares them with global trends.