Dongwei Yao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Dongwei Yao has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
Feng Wu
College of Energy Engineering, Zhejiang University, Hangzhou, China
20 shared publicationsXiaohan Hu
College of Energy Engineering, Zhejiang University, Hangzhou 310027, China
7 shared publications- Feng Wu
College of Energy Engineering, Zhejiang University, Hangzhou 310027, China
6 shared publications - Biao Liu
College of Energy Engineering, Zhejiang University, Hangzhou 310027, China
5 shared publications Weiyang Jin
Wuxi Weifu Environmental Catalysts Co., Ltd., Wuxi 214018, China
5 shared publicationsXinlei Wang
Department of Agricultural and Biological Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801, United States
5 shared publications
Latest Publications
- 8 January 2026
- Published by Springer Nature in Waste Disposal & Sustainable Energy
- Vol. 8 (1) , 71-88
Mechanistic insights into the impact of high H2O and high-NOx exhaust from ammonia-fueled engines on Cu-SSZ-13 SCR catalyst activity
- 8 January 2026
- Published by Springer Nature in Waste Disposal & Sustainable Energy
- Vol. 8 (1) , 71-88
Mechanistic insights into the impact of high H2O and high-NOx exhaust from ammonia-fueled engines on Cu-SSZ-13 SCR catalyst activity
- 17 October 2025
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (23) , 7098-7109
Experimental investigation on the coupling mechanism between sulfur poisoning and hydrothermal aging of the Cu-SSZ-13 SCR catalyst
Cu-SSZ-13, a diesel vehicle selective catalytic reduction (SCR) catalyst, faces deactivation problems caused by sulfur poisoning and hydrothermal aging, which coexist in diesel vehicle after-treatment systems, complicating its actual deactivation. Activity evaluation and characterization tests were used to investigate the coupled deactivation properties as well as sulfur poisoning and hydrothermal aging mechanisms of the Cu-SSZ-13 SCR catalyst. The activity evaluation tests included the standard SCR reaction and NH3 oxidation tests, and the characterization tests included the NH3-TPD test, SO2-TPD test, and NO + NH3 TPR test. The sulfur-poisoned active sites of Cu-SSZ-13 inhibited the migration of ZCuOH to Z2Cu in the subsequent hydrothermal aging, resulting in lower SCR activity at high temperatures than the samples hydrothermally aged only. The migration of ZCuOH to Z2Cu caused by hydrothermal aging increased the sulfur resistance of the active sites, decreased the sulfur species production, and increased the SCR activity at low temperatures. For the samples that hydrothermally aged with SO2 at 650 °C, some sulfur species were formed, which significantly affected the SCR activity in the whole temperature range. At 750 °C, the low-temperature SCR activity showed no reduction. At 850 °C, SO2 promoted the formation of copper oxide. These research conditions closely resemble real-world aging conditions, refining the mechanism of coupled deactivation due to hydrothermal aging and sulfur poisoning in the Cu-SSZ-13 catalyst.
- 17 October 2025
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (23) , 7098-7109
Experimental investigation on the coupling mechanism between sulfur poisoning and hydrothermal aging of the Cu-SSZ-13 SCR catalyst
Cu-SSZ-13, a diesel vehicle selective catalytic reduction (SCR) catalyst, faces deactivation problems caused by sulfur poisoning and hydrothermal aging, which coexist in diesel vehicle after-treatment systems, complicating its actual deactivation. Activity evaluation and characterization tests were used to investigate the coupled deactivation properties as well as sulfur poisoning and hydrothermal aging mechanisms of the Cu-SSZ-13 SCR catalyst. The activity evaluation tests included the standard SCR reaction and NH3 oxidation tests, and the characterization tests included the NH3-TPD test, SO2-TPD test, and NO + NH3 TPR test. The sulfur-poisoned active sites of Cu-SSZ-13 inhibited the migration of ZCuOH to Z2Cu in the subsequent hydrothermal aging, resulting in lower SCR activity at high temperatures than the samples hydrothermally aged only. The migration of ZCuOH to Z2Cu caused by hydrothermal aging increased the sulfur resistance of the active sites, decreased the sulfur species production, and increased the SCR activity at low temperatures. For the samples that hydrothermally aged with SO2 at 650 °C, some sulfur species were formed, which significantly affected the SCR activity in the whole temperature range. At 750 °C, the low-temperature SCR activity showed no reduction. At 850 °C, SO2 promoted the formation of copper oxide. These research conditions closely resemble real-world aging conditions, refining the mechanism of coupled deactivation due to hydrothermal aging and sulfur poisoning in the Cu-SSZ-13 catalyst.
- Open Access
Neural Network-Based Control Optimization for NH3 Leakage and NOx Emissions in SCR Systems
This study proposes a data-driven optimization framework to enhance emission control performance in diesel engine selective catalytic reduction (SCR) systems under transient operating conditions. A one-dimensional SCR model was constructed in GT-Power, and simulation datasets were generated using experimentally measured inputs from the World Harmonized Transient Cycle (WHTC), with representative emission responses obtained by varying fixed ammonia-to-NOx (A/N) ratios. Building on these datasets, a hybrid prediction model combining Long Short-Term Memory (LSTM) networks and multi-head attention mechanisms was developed to accurately forecast SCR outlet NH3 leakage and NOx emissions. The model exhibited high predictive accuracy, achieving R2 values exceeding 0.977 and low RMSE across training, validation, and test sets. Based on the model predictions, a constrained dynamic multi-objective optimization strategy was implemented to adaptively adjust ammonia dosing, aiming to simultaneously minimize NH3 leakage and NOx emissions. The optimized NH3 injection profiles were validated through reapplication in the GT-Power simulation environment. Compared to the baseline fixed-ratio control strategy, the proposed approach reduced NH3 leakage and NOx emissions by 34.40% and 11.15%, respectively, as determined for the transient segment of the WHTC cycle. These results demonstrate the effectiveness of integrating physics-based simulation, deep learning prediction, and dynamic optimization for improving aftertreatment adaptability and emission compliance in real-world diesel engine applications. All reported values are based on a single simulated WHTC cycle without statistical uncertainty analysis.
Open AccessNeural Network-Based Control Optimization for NH3 Leakage and NOx Emissions in SCR Systems
This study proposes a data-driven optimization framework to enhance emission control performance in diesel engine selective catalytic reduction (SCR) systems under transient operating conditions. A one-dimensional SCR model was constructed in GT-Power, and simulation datasets were generated using experimentally measured inputs from the World Harmonized Transient Cycle (WHTC), with representative emission responses obtained by varying fixed ammonia-to-NOx (A/N) ratios. Building on these datasets, a hybrid prediction model combining Long Short-Term Memory (LSTM) networks and multi-head attention mechanisms was developed to accurately forecast SCR outlet NH3 leakage and NOx emissions. The model exhibited high predictive accuracy, achieving R2 values exceeding 0.977 and low RMSE across training, validation, and test sets. Based on the model predictions, a constrained dynamic multi-objective optimization strategy was implemented to adaptively adjust ammonia dosing, aiming to simultaneously minimize NH3 leakage and NOx emissions. The optimized NH3 injection profiles were validated through reapplication in the GT-Power simulation environment. Compared to the baseline fixed-ratio control strategy, the proposed approach reduced NH3 leakage and NOx emissions by 34.40% and 11.15%, respectively, as determined for the transient segment of the WHTC cycle. These results demonstrate the effectiveness of integrating physics-based simulation, deep learning prediction, and dynamic optimization for improving aftertreatment adaptability and emission compliance in real-world diesel engine applications. All reported values are based on a single simulated WHTC cycle without statistical uncertainty analysis.
- 23 January 2025
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (5) , 1547-1556
Experimental study on sulfur poisoning characteristics of Cu-SSZ-13 SCR catalyst under diesel vehicle multivalent sulfur-containing exhaust atmosphere
The amount of sulfate produced by SO3 poisoning was significantly increased compared to SO2 poisoning. Low-temperature sulfur poisoning and the presence of SO3 resulted in a significant reduction in the number of active sites.
- 23 January 2025
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (5) , 1547-1556
Experimental study on sulfur poisoning characteristics of Cu-SSZ-13 SCR catalyst under diesel vehicle multivalent sulfur-containing exhaust atmosphere
The amount of sulfate produced by SO3 poisoning was significantly increased compared to SO2 poisoning. Low-temperature sulfur poisoning and the presence of SO3 resulted in a significant reduction in the number of active sites.
- 5 November 2024
- Published by Springer Nature in International Journal of Automotive Technology
- Vol. 26 (4) , 1077-1089
Online Vehicle Velocity Prediction Based on an Adaptive GRNN with Various Input Signals
- 5 November 2024
- Published by Springer Nature in International Journal of Automotive Technology
- Vol. 26 (4) , 1077-1089
Online Vehicle Velocity Prediction Based on an Adaptive GRNN with Various Input Signals
- Open Access
Optimization Analysis of Various Parameters Based on Response Surface Methodology for Enhancing NOx Catalytic Reduction Performance of Urea Selective Catalytic Reduction on Cu-ZSM-13 Catalyst
While selective catalytic reduction (SCR) has long been indispensable for nitrogen oxide (NOx) removal, optimizing its performance remains a significant challenge. This study investigates the combined effects of structural and intake parameters on SCR performance, an aspect often overlooked in previous research. This paper innovatively developed a three-dimensional SCR channel model and employed response surface methodology to conduct an in-depth analysis of multiple key factors. This multidimensional, multi-method approach enables a more comprehensive understanding of SCR system mechanics. Through target optimization, we achieved a simultaneous improvement in three critical indicators: the NOx conversion rate, pressure drop, and ammonia slip. It is worth noting that the NOx conversion rate has been optimized from 17.07% to 98.25%, the pressure drop has been increased from 3454.62 Pa to 2558.74 Pa, and the NH3 slip has been transformed from 122.26 ppm to 17.49 ppm. These results not only advance the theoretical understanding of SCR technology but also provide valuable design insights for practical applications. Our findings pave the way for the development of more efficient and environmentally friendly SCR systems, potentially revolutionizing NOx control in various industries.
Open AccessOptimization Analysis of Various Parameters Based on Response Surface Methodology for Enhancing NOx Catalytic Reduction Performance of Urea Selective Catalytic Reduction on Cu-ZSM-13 Catalyst
While selective catalytic reduction (SCR) has long been indispensable for nitrogen oxide (NOx) removal, optimizing its performance remains a significant challenge. This study investigates the combined effects of structural and intake parameters on SCR performance, an aspect often overlooked in previous research. This paper innovatively developed a three-dimensional SCR channel model and employed response surface methodology to conduct an in-depth analysis of multiple key factors. This multidimensional, multi-method approach enables a more comprehensive understanding of SCR system mechanics. Through target optimization, we achieved a simultaneous improvement in three critical indicators: the NOx conversion rate, pressure drop, and ammonia slip. It is worth noting that the NOx conversion rate has been optimized from 17.07% to 98.25%, the pressure drop has been increased from 3454.62 Pa to 2558.74 Pa, and the NH3 slip has been transformed from 122.26 ppm to 17.49 ppm. These results not only advance the theoretical understanding of SCR technology but also provide valuable design insights for practical applications. Our findings pave the way for the development of more efficient and environmentally friendly SCR systems, potentially revolutionizing NOx control in various industries.
- 2 October 2023
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 45 (4) , 12165-12180
Research on dynamic modeling and carbon load estimation of diesel particulate filter
- 2 October 2023
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 45 (4) , 12165-12180
Research on dynamic modeling and carbon load estimation of diesel particulate filter
- 25 July 2023
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 37 (16) , 12192-12203
Experimental Study on the Effects of the Exhaust Atmosphere on SO2 Poisoning over the Cu-SSZ-13 SCR Catalyst
- 25 July 2023
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 37 (16) , 12192-12203
Experimental Study on the Effects of the Exhaust Atmosphere on SO2 Poisoning over the Cu-SSZ-13 SCR Catalyst
- 17 May 2023
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 8 (8) , 2040-2051
Modeling and analysis of ammonia oxidation and nitrous oxide formation on a dual-layer ammonia slip catalyst for diesel after-treatment
A comprehensive one-dimensional kinetic model was developed to detail ammonia oxidation and nitrous oxide (N2O) formation on a dual-layer ammonia slip catalyst (ASC).
- 17 May 2023
- Published by Royal Society of Chemistry (RSC) in Reaction Chemistry & Engineering
- Vol. 8 (8) , 2040-2051
Modeling and analysis of ammonia oxidation and nitrous oxide formation on a dual-layer ammonia slip catalyst for diesel after-treatment
A comprehensive one-dimensional kinetic model was developed to detail ammonia oxidation and nitrous oxide (N2O) formation on a dual-layer ammonia slip catalyst (ASC).