Saeed Mirzanejhad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Saeed Mirzanejhad has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
Farshad Sohbatzadeh
Department of Atomic and Molecular Physics, Faculty of Basic Sciences, University of Mazandaran, Babolsar, Iran
5 shared publications- Farshad Sohbatzadeh
University of Mazandaran
4 shared publications - Atefeh Joulaei
Institute for Research in Fundamental Sciences (IPM), P.O. Box 19395-5531, Tehran, Iran
3 shared publications Mehdi Asri
Islamic Azad University
3 shared publicationsAmin Ghadi
Department of Atomic and Molecular Physics, Faculty of Sciences, Mazandaran University, Babolsar, Iran
2 shared publications- Hamed Soltani Ahmadi
Department of Atomic and Molecular Physics, Faculty of Science, University of Mazandaran, Babolsar, 47416-95447, Mazandaran, Iran
2 shared publications
Latest Publications
- 27 January 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (6)
Electrohydrodynamic wind generation in planar DBDs: Role of electrode symmetry and geometry
This study experimentally and numerically investigates the electrohydrodynamic (EHD) interaction induced by a surface dielectric barrier discharge (SDBD) actuator at atmospheric pressure. The EHD effect, driven by non-thermal plasma in a dielectric barrier discharge (DBD), generates ionic wind, which is characterized here for a symmetric annular-type DBD actuator. A symmetric annular-type DBD actuator, consisting of concentric ring–disk electrodes that generate a predominantly vertical ionic wind rather than a tangential jet. Despite extensive studies on linear and tangential SDBD actuators, the influence of annular electrode geometry on vertically induced ionic wind and associated ozone generation remains insufficiently explored. We analyze the induced wind velocity perpendicular to the electrode plane, focusing on the influence of geometric parameters—electrode diameter (D) and thickness (δ)—on performance. Experimental results reveal a maximum wind velocity of 3.42 m/s ± 1% for an optimized configuration (D = 32 mm, δ = 0.06 mm), corroborated by numerical simulations. The simulations further elucidate the velocity profile, volumetric force, electron temperature, and gas pressure distribution within the plasma region. Complementary diagnostics, including O3 concentration measurements and Schlieren imaging, demonstrate that larger electrode diameters (e.g., 32 mm and 22 mm) enhance vertical flow height but concurrently increase ozone production. These findings provide actionable insights for designing DBD-based systems in applications such as plasma flow control, air purification, and biomedical plasma technologies.
- 27 January 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (6)
Electrohydrodynamic wind generation in planar DBDs: Role of electrode symmetry and geometry
This study experimentally and numerically investigates the electrohydrodynamic (EHD) interaction induced by a surface dielectric barrier discharge (SDBD) actuator at atmospheric pressure. The EHD effect, driven by non-thermal plasma in a dielectric barrier discharge (DBD), generates ionic wind, which is characterized here for a symmetric annular-type DBD actuator. A symmetric annular-type DBD actuator, consisting of concentric ring–disk electrodes that generate a predominantly vertical ionic wind rather than a tangential jet. Despite extensive studies on linear and tangential SDBD actuators, the influence of annular electrode geometry on vertically induced ionic wind and associated ozone generation remains insufficiently explored. We analyze the induced wind velocity perpendicular to the electrode plane, focusing on the influence of geometric parameters—electrode diameter (D) and thickness (δ)—on performance. Experimental results reveal a maximum wind velocity of 3.42 m/s ± 1% for an optimized configuration (D = 32 mm, δ = 0.06 mm), corroborated by numerical simulations. The simulations further elucidate the velocity profile, volumetric force, electron temperature, and gas pressure distribution within the plasma region. Complementary diagnostics, including O3 concentration measurements and Schlieren imaging, demonstrate that larger electrode diameters (e.g., 32 mm and 22 mm) enhance vertical flow height but concurrently increase ozone production. These findings provide actionable insights for designing DBD-based systems in applications such as plasma flow control, air purification, and biomedical plasma technologies.
- 5 May 2025
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 391
Surface plasmon resonance of nanometer Ag-Cu alloy layers on Blu-ray and DVD disks
- 5 May 2025
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 391
Surface plasmon resonance of nanometer Ag-Cu alloy layers on Blu-ray and DVD disks
- 19 May 2024
- Published by Springer Nature in Applied Physics B
- Vol. 130 (6) , 1-6
Flying focus laser wake field acceleration by donut shape pulse
- 19 May 2024
- Published by Springer Nature in Applied Physics B
- Vol. 130 (6) , 1-6
Flying focus laser wake field acceleration by donut shape pulse
- Open Access
- 1 August 2023
- Published by AIP Publishing in Physics of Plasmas
- Vol. 30 (8)
Numerical investigation of the role of linear and nonlinear forces in determining the direction of electric wind caused by atmospheric pressure DC corona discharge
In this study, the force generated by atmospheric positive and negative corona discharges was investigated using a simulation of a wire–cylinder configuration. We provided new insight into the atmospheric corona discharge by introducing a nonlinear force on the charged particles in the vicinity of the wire electrode. To elucidate the origin of both forces in corona discharges, we performed 2D simulations via COMSOL Multiphysics and MATLAB software. It was observed that the direction of nonlinear force is always from the wire to the cylinder regardless of the applied voltage polarity. It was illustrated that the corresponding nonlinear force of the positive corona is larger than that of the negative corona discharge. However, the span of the nonlinear force is greater in the negative corona discharge. The numerical simulation results showed that, in addition to the linear force (Coulomb force), a strong nonlinear force is generated around the wire electrode (powered electrode) that plays a complementary role in the production of electric wind caused by corona discharge. As this nonlinear force is limited to the vicinity of the wire electrode, it is possible to ignore the nonlinear force with a good approximation in the calculation of the total electrohydrodynamic force, but this force cannot be ignored in the process of forming the electric wind.
- 1 August 2023
- Published by AIP Publishing in Physics of Plasmas
- Vol. 30 (8)
Open AccessNumerical investigation of the role of linear and nonlinear forces in determining the direction of electric wind caused by atmospheric pressure DC corona discharge
In this study, the force generated by atmospheric positive and negative corona discharges was investigated using a simulation of a wire–cylinder configuration. We provided new insight into the atmospheric corona discharge by introducing a nonlinear force on the charged particles in the vicinity of the wire electrode. To elucidate the origin of both forces in corona discharges, we performed 2D simulations via COMSOL Multiphysics and MATLAB software. It was observed that the direction of nonlinear force is always from the wire to the cylinder regardless of the applied voltage polarity. It was illustrated that the corresponding nonlinear force of the positive corona is larger than that of the negative corona discharge. However, the span of the nonlinear force is greater in the negative corona discharge. The numerical simulation results showed that, in addition to the linear force (Coulomb force), a strong nonlinear force is generated around the wire electrode (powered electrode) that plays a complementary role in the production of electric wind caused by corona discharge. As this nonlinear force is limited to the vicinity of the wire electrode, it is possible to ignore the nonlinear force with a good approximation in the calculation of the total electrohydrodynamic force, but this force cannot be ignored in the process of forming the electric wind.
- 9 February 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (3) , 035604
Resonance excitation of nonlinear wake field by non-uniform train of laser pulses
Wake field excitation by a train of the laser pulses is an attractive branch of the laser wake field acceleration (LWFA). In this paper, we first discuss analytical formalism for constructing uniform and non-uniform train of laser pulses from a chirped laser pulse in the Michelson interferometer. Afterward, special criteria for resonance generation of wake field with the laser multi-pulses (MP-LWFA) are discussed numerically. We show that in the nonlinear regime of the laser wake field, a non-uniform train of laser pulse can be attractive in maintaining the resonance condition. For large laser amplitudes, 3 < a 0 < 10 (a 0 = eE/mcω), the optimized non-uniform train of laser pulses shows >30% increase in the acceleration gradient compared to the uniform train of laser pulses.
- 9 February 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (3) , 035604
Resonance excitation of nonlinear wake field by non-uniform train of laser pulses
Wake field excitation by a train of the laser pulses is an attractive branch of the laser wake field acceleration (LWFA). In this paper, we first discuss analytical formalism for constructing uniform and non-uniform train of laser pulses from a chirped laser pulse in the Michelson interferometer. Afterward, special criteria for resonance generation of wake field with the laser multi-pulses (MP-LWFA) are discussed numerically. We show that in the nonlinear regime of the laser wake field, a non-uniform train of laser pulse can be attractive in maintaining the resonance condition. For large laser amplitudes, 3 < a 0 < 10 (a 0 = eE/mcω), the optimized non-uniform train of laser pulses shows >30% increase in the acceleration gradient compared to the uniform train of laser pulses.
- 26 January 2023
- Published by Elsevier in Physics Letters A
- Vol. 463
Linear and nonlinear optical properties surface plasmon polariton localization in plasmonic crystal metallic nanowires
- 26 January 2023
- Published by Elsevier in Physics Letters A
- Vol. 463
Linear and nonlinear optical properties surface plasmon polariton localization in plasmonic crystal metallic nanowires
- 29 July 2022
- Published by Springer Nature in Brazilian Journal of Physics
- Vol. 52 (5) , 1-18
Pressure and Gas Type Effects on the Plasma Limiter Operation at the S-band
- 29 July 2022
- Published by Springer Nature in Brazilian Journal of Physics
- Vol. 52 (5) , 1-18
Pressure and Gas Type Effects on the Plasma Limiter Operation at the S-band
- 15 June 2022
- Published by Springer Nature in Plasmonics
- Vol. 17 (4) , 1809-1817
Plasmonic Refractive Index Sensor and Plasmonic Bandpass Filter Including Graded 4-Step Waveguide Based on Fano Resonances
- 15 June 2022
- Published by Springer Nature in Plasmonics
- Vol. 17 (4) , 1809-1817
Plasmonic Refractive Index Sensor and Plasmonic Bandpass Filter Including Graded 4-Step Waveguide Based on Fano Resonances
- Open Access
- 3 January 2022
- Published by Springer Nature in Research Square
Plasmonic Refractive Index Sensor and Plasmonic Bandpass Filter Including Waveguide and Four Teeth Based On Fano Resonances
A plasmonic refractive index sensor including a Metal-Insulator-Metal waveguide (MIM) with four teeth is proposed. Transmittance (T), Sensitivity (S) and Figure of Merit (FOM) investigated numerically and analysed via Finite Difference Time Domain method (FDTD). The simulation results show the generation of double Fano resonances in the system that the resonance wavelength and the resonance line-shapes can be adjusted by changing the geometry of the device. By optimizing the structure in the initial configuration, the maximum sensitivity of 1078nm/RIU and FOM of 3.62×105 is achieved. Then change the structure parameters. In this case, the maximum sensitivity and FOM are 1041nm/RIU and 2.94×104 respectively, thus two detection points can be used for the refractive index sensor. Due to proper performance and adjustable Fano resonance points, this structure is significant for fabricating sensitive refractive index sensor and plasmonic bandpass filter.
- 3 January 2022
- Published by Springer Nature in Research Square
Open AccessPlasmonic Refractive Index Sensor and Plasmonic Bandpass Filter Including Waveguide and Four Teeth Based On Fano Resonances
A plasmonic refractive index sensor including a Metal-Insulator-Metal waveguide (MIM) with four teeth is proposed. Transmittance (T), Sensitivity (S) and Figure of Merit (FOM) investigated numerically and analysed via Finite Difference Time Domain method (FDTD). The simulation results show the generation of double Fano resonances in the system that the resonance wavelength and the resonance line-shapes can be adjusted by changing the geometry of the device. By optimizing the structure in the initial configuration, the maximum sensitivity of 1078nm/RIU and FOM of 3.62×105 is achieved. Then change the structure parameters. In this case, the maximum sensitivity and FOM are 1041nm/RIU and 2.94×104 respectively, thus two detection points can be used for the refractive index sensor. Due to proper performance and adjustable Fano resonance points, this structure is significant for fabricating sensitive refractive index sensor and plasmonic bandpass filter.
- 1 December 2020
- Published by Hindawi Limited in Laser and Particle Beams
- Vol. 38 (4) , 251-258
Relativistic cavity, possibilities, and advantages
The relativistic mirror (RM) is an interesting subject which introduced in the nonlinear regime of the laser-plasma interaction. Reflection of counter-propagating probe pulse from relativistic flying mirror has some excellent features, such as frequency up-shifting and compressing by a factor of 4 gamma(2). In the high-intensity laser-plasma interaction, sometimes a sequence of RMs creates. For example, electron density cusps generate in the nonlinear laser wakefield generation or flying electron sheaths create in the blown-out regime of the laser foil interaction. Under these circumstances, the second counter-propagated seed (probe) pulse can be reflected back and forth between two or more successive RMs. This structure may be used as a relativistic cavity (RECA). Amplification and threshold conditions for the gain medium and pumping rate in the RECA are obtained, and it is shown that amplification can be started from background simultaneous emission (without seed pulse). A new feature of RECA is it's bidirectional (two frequencies) characteristic. Thereupon, the gain process can be implemented on the two different transitions in this bidirectional gain structure. In the RECA, driver pulse may be assembled as a pumping operation, and background plasma medium with high degree ionized substances is a good candidate for gain medium in the UV or X-ray regions. In this paper, we propose a new all-optical cavity for the generation of the ultrashort laser pulse in the UV or X-ray regions.
- 1 December 2020
- Published by Hindawi Limited in Laser and Particle Beams
- Vol. 38 (4) , 251-258
Relativistic cavity, possibilities, and advantages
The relativistic mirror (RM) is an interesting subject which introduced in the nonlinear regime of the laser-plasma interaction. Reflection of counter-propagating probe pulse from relativistic flying mirror has some excellent features, such as frequency up-shifting and compressing by a factor of 4 gamma(2). In the high-intensity laser-plasma interaction, sometimes a sequence of RMs creates. For example, electron density cusps generate in the nonlinear laser wakefield generation or flying electron sheaths create in the blown-out regime of the laser foil interaction. Under these circumstances, the second counter-propagated seed (probe) pulse can be reflected back and forth between two or more successive RMs. This structure may be used as a relativistic cavity (RECA). Amplification and threshold conditions for the gain medium and pumping rate in the RECA are obtained, and it is shown that amplification can be started from background simultaneous emission (without seed pulse). A new feature of RECA is it's bidirectional (two frequencies) characteristic. Thereupon, the gain process can be implemented on the two different transitions in this bidirectional gain structure. In the RECA, driver pulse may be assembled as a pumping operation, and background plasma medium with high degree ionized substances is a good candidate for gain medium in the UV or X-ray regions. In this paper, we propose a new all-optical cavity for the generation of the ultrashort laser pulse in the UV or X-ray regions.