Israel Martin-Escalona
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Israel Martin-Escalona has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Francisco Barcelo-Arroyo
Universitat Politecnica de Catalunya
24 shared publications - Enrica Zola
Network Engineering Department, Universitat Politecnica de Catalunya, 08034 Barcelona, Spain
20 shared publications Francisco Barcelo-Arroyo
Universitat Politecnica de Catalunya, Barcelona, Spain
12 shared publicationsF. Barcelo
Dept. Enginyeria Telematica, Tech. Univ. of Catalonia, Barcelona, Spain
4 shared publicationsFrancisco Barcelo
Technical University of Catalonia (UPC), c/ Jordi Girona 1-3, Edifici C3, Barcelona, Spain
4 shared publicationsMarc Ciurana
4 shared publications
Latest Publications
- Open Access
- 22 June 2026
- Published by Elsevier in Journal of Network and Computer Applications
- Vol. 253
Survey-free indoor localization via Wi-Fi RTT and physics-informed GPR radio map reconstruction
- 22 June 2026
- Published by Elsevier in Journal of Network and Computer Applications
- Vol. 253
Open AccessSurvey-free indoor localization via Wi-Fi RTT and physics-informed GPR radio map reconstruction
- Open Access
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (7) , 14188-14202
A Novel Framework for Scalable and Low-Complexity Wi-Fi RTT Positioning for IoT Devices
The increasing demand for the Internet of Things (IoT) applications has driven the need for precise and scalable indoor positioning systems (IPSs). Among existing techniques, wireless fidelity (Wi-Fi) round-trip time (RTT), introduced by the IEEE 802.11mc standard, offers high accuracy but suffers from scalability limitations due to the frames specifically sent for localization purposes. While fingerprinting can improve system scalability compared to multilateration, it relies on computationally intensive machine learning algorithms, which can be challenging to deploy on resource-constrained IoT devices. This article proposes a novel approach to improve the scalability and efficiency of Wi-Fi RTT fingerprinting solutions. The proposed system aims to simplify clustering and feature selection tasks by sorting received-signal strength indicator (RSSI) measurements, thus eliminating the need for more complex algorithms. Experimental evaluations, in scenarios with varying densities of access points (APs), demonstrate significant performance gains compared to state-of-the-art (SoA) approaches. In high-density scenarios (e.g., one AP per 22 m2), the proposed system achieves a root-mean-squared error (RMSE) below 50 cm, a decrease of almost 98% in the memory used by the device, and supports location requests of up to 124 simultaneous Wi-Fi users, representing a 7.8% increase in scalability compared to previous proposals. These results highlight the potential of the proposed system to achieve a good compromise among accuracy, scalability, and complexity, making it a viable solution for IPS implementation in IoT environments.
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (7) , 14188-14202
Open AccessA Novel Framework for Scalable and Low-Complexity Wi-Fi RTT Positioning for IoT Devices
The increasing demand for the Internet of Things (IoT) applications has driven the need for precise and scalable indoor positioning systems (IPSs). Among existing techniques, wireless fidelity (Wi-Fi) round-trip time (RTT), introduced by the IEEE 802.11mc standard, offers high accuracy but suffers from scalability limitations due to the frames specifically sent for localization purposes. While fingerprinting can improve system scalability compared to multilateration, it relies on computationally intensive machine learning algorithms, which can be challenging to deploy on resource-constrained IoT devices. This article proposes a novel approach to improve the scalability and efficiency of Wi-Fi RTT fingerprinting solutions. The proposed system aims to simplify clustering and feature selection tasks by sorting received-signal strength indicator (RSSI) measurements, thus eliminating the need for more complex algorithms. Experimental evaluations, in scenarios with varying densities of access points (APs), demonstrate significant performance gains compared to state-of-the-art (SoA) approaches. In high-density scenarios (e.g., one AP per 22 m2), the proposed system achieves a root-mean-squared error (RMSE) below 50 cm, a decrease of almost 98% in the memory used by the device, and supports location requests of up to 124 simultaneous Wi-Fi users, representing a 7.8% increase in scalability compared to previous proposals. These results highlight the potential of the proposed system to achieve a good compromise among accuracy, scalability, and complexity, making it a viable solution for IPS implementation in IoT environments.
- Open Access
- 24 September 2024
- Published by MDPI AG in Technologies
- Vol. 12 (10) , 172
On the Integration of Standard Deviation and Clustering to Promote Scalable and Precise Wi-Fi Round-Trip Time Positioning
Recently, the use of fingerprinting has been proposed for positioning using the Wi-Fi RTT estimations gathered by IEEE 802.11mc devices. Wi-Fi RTT poses a challenge on scalability due to the location-specific traffic injected in the network, which may limit the data traffic transmissions of other Wi-Fi users. In this respect, fingerprinting has been regarded as a promising scalable technique, compared to multilateration. While coupling other metrics should bring relief to the system, reducing the number of APs to which RTT measurements are requested alleviates the burden in specific cells. But how far may we go? This paper assesses several methods aimed at reducing the Wi-Fi RTT overhead while preserving the precision of the calculated position. The use of the Wi-Fi RTT standard deviation is assessed for the first time, being especially useful when the number of RTT procedures is minimized. The application of clustering can also improve position estimates while leveraging bandwidth for other users’ purposes.
- 24 September 2024
- Published by MDPI AG in Technologies
- Vol. 12 (10) , 172
Open AccessOn the Integration of Standard Deviation and Clustering to Promote Scalable and Precise Wi-Fi Round-Trip Time Positioning
Recently, the use of fingerprinting has been proposed for positioning using the Wi-Fi RTT estimations gathered by IEEE 802.11mc devices. Wi-Fi RTT poses a challenge on scalability due to the location-specific traffic injected in the network, which may limit the data traffic transmissions of other Wi-Fi users. In this respect, fingerprinting has been regarded as a promising scalable technique, compared to multilateration. While coupling other metrics should bring relief to the system, reducing the number of APs to which RTT measurements are requested alleviates the burden in specific cells. But how far may we go? This paper assesses several methods aimed at reducing the Wi-Fi RTT overhead while preserving the precision of the calculated position. The use of the Wi-Fi RTT standard deviation is assessed for the first time, being especially useful when the number of RTT procedures is minimized. The application of clustering can also improve position estimates while leveraging bandwidth for other users’ purposes.
- Open Access
- 30 October 2023
- Published by Association for Computing Machinery (ACM)
- p. 19-26
Assessing the Impact of Coupling RTT and RSSI Measurements in Fingerprinting Wi-Fi Indoor Positioning
The field of Indoor Positioning Systems (IPS) is rapidly expanding due to the increasing need for accurate indoor localization. This research delves into the fingerprinting technique, a commonly used method in IPS, and advocates for coupling the Received Signal Strength Indicator (RSSI) to the Round-Trip Time (RTT) to boost its effectiveness. The primary incentive for this integration is to alleviate the network burden caused by the Wi-Fi RTT method while maintaining the system's precision. Our goal is two-fold: firstly, we aim to find the ideal combination of RTT and RSSI features that a specific machine learning algorithm requires to supply precise and prompt position estimations for real-time applications. Secondly, we aim to reduce the number of RTT features needed, as they demand the addition of location traffic, which may saturate the network when multiple stations try to locate themselves. To meet these goals, a variety of machine learning models and several combinations of the available metrics (RTT and RSSI) have been assessed. Initial findings indicate that this combined approach significantly diminishes network overhead and enhances the scalability and effectiveness of the fingerprinting method, paving the way for further exploration in indoor localization.
- 30 October 2023
- Published by Association for Computing Machinery (ACM)
- p. 19-26
Open AccessAssessing the Impact of Coupling RTT and RSSI Measurements in Fingerprinting Wi-Fi Indoor Positioning
The field of Indoor Positioning Systems (IPS) is rapidly expanding due to the increasing need for accurate indoor localization. This research delves into the fingerprinting technique, a commonly used method in IPS, and advocates for coupling the Received Signal Strength Indicator (RSSI) to the Round-Trip Time (RTT) to boost its effectiveness. The primary incentive for this integration is to alleviate the network burden caused by the Wi-Fi RTT method while maintaining the system's precision. Our goal is two-fold: firstly, we aim to find the ideal combination of RTT and RSSI features that a specific machine learning algorithm requires to supply precise and prompt position estimations for real-time applications. Secondly, we aim to reduce the number of RTT features needed, as they demand the addition of location traffic, which may saturate the network when multiple stations try to locate themselves. To meet these goals, a variety of machine learning models and several combinations of the available metrics (RTT and RSSI) have been assessed. Initial findings indicate that this combined approach significantly diminishes network overhead and enhances the scalability and effectiveness of the fingerprinting method, paving the way for further exploration in indoor localization.
- Open Access
- 30 October 2023
- Published by Association for Computing Machinery (ACM)
- p. 205-208
Impact of the Burst Size on the FTM Procedure in Android Phones
Since its integration in common-off-the-shelf (COTS) devices, the IEEE 802.11mc standard for the ranging estimation between a Wi-Fi card and an Access Point (AP) has grown interest in the research community. In 2021, Android released the new version 12 of its operating system, which adds some new configurable features in the Wi-Fi fine time measurement (FTM): the possibility for the user to set different burst sizes to the FTM procedure and a new one-sided FTM mode that can work with legacy APs. This paper assesses the impact of the burst size on the performance of the Wi-Fi FTM ranging. Intuitively, one may expect a higher stability in the ranging observation when the burst size is increased; however, it would imply an increase in the overhead of the ranging procedure. The impact has been studied with several models of smartphones and APs, and working in different frequency channels. The results show that, while using the minimum size allowed is not recommended because of a significant decrease in the performance, using burst sizes higher than 8 does not bring significant advantages that justify the additional traffic injected in the network.
- 30 October 2023
- Published by Association for Computing Machinery (ACM)
- p. 205-208
Open AccessImpact of the Burst Size on the FTM Procedure in Android Phones
Since its integration in common-off-the-shelf (COTS) devices, the IEEE 802.11mc standard for the ranging estimation between a Wi-Fi card and an Access Point (AP) has grown interest in the research community. In 2021, Android released the new version 12 of its operating system, which adds some new configurable features in the Wi-Fi fine time measurement (FTM): the possibility for the user to set different burst sizes to the FTM procedure and a new one-sided FTM mode that can work with legacy APs. This paper assesses the impact of the burst size on the performance of the Wi-Fi FTM ranging. Intuitively, one may expect a higher stability in the ranging observation when the burst size is increased; however, it would imply an increase in the overhead of the ranging procedure. The impact has been studied with several models of smartphones and APs, and working in different frequency channels. The results show that, while using the minimum size allowed is not recommended because of a significant decrease in the performance, using burst sizes higher than 8 does not bring significant advantages that justify the additional traffic injected in the network.
- Open Access
Improving Fingerprint-Based Positioning by Using IEEE 802.11mc FTM/RTT Observables
Received signal strength (RSS) has been one of the most used observables for location purposes due to its availability at almost every wireless device. However, the volatile nature of RSS tends to yield to non-reliable location solutions. IEEE 802.11mc enabled the use of the round trip time (RTT) for positioning, which is expected to be a more consistent observable for location purposes. This approach has been gaining support from several companies such as Google, which introduced that feature in the Android O.S. As a result, RTT estimation is now available in several recent off-the-shelf devices, opening a wide range of new approaches for computing location. However, RTT has been traditionally addressed to multilateration solutions. Few works exist that assess the feasibility of the RTT as an accurate feature in positioning methods based on classification algorithms. An attempt is made in this paper to fill this gap by investigating the performance of several classification models in terms of accuracy and positioning errors. The performance is assessed using different AP layouts, distinct AP vendors, and different frequency bands. The accuracy and precision of the RTT-based position estimation is always better than the one obtained with RSS in all the studied scenarios, and especially when few APs are available. In addition, all the considered ML algorithms perform pretty well. As a result, it is not necessary to use more complex solutions (e.g., SVM) when simpler ones (e.g., nearest neighbor classifiers) achieve similar results both in terms of accuracy and location error.
Open AccessImproving Fingerprint-Based Positioning by Using IEEE 802.11mc FTM/RTT Observables
Received signal strength (RSS) has been one of the most used observables for location purposes due to its availability at almost every wireless device. However, the volatile nature of RSS tends to yield to non-reliable location solutions. IEEE 802.11mc enabled the use of the round trip time (RTT) for positioning, which is expected to be a more consistent observable for location purposes. This approach has been gaining support from several companies such as Google, which introduced that feature in the Android O.S. As a result, RTT estimation is now available in several recent off-the-shelf devices, opening a wide range of new approaches for computing location. However, RTT has been traditionally addressed to multilateration solutions. Few works exist that assess the feasibility of the RTT as an accurate feature in positioning methods based on classification algorithms. An attempt is made in this paper to fill this gap by investigating the performance of several classification models in terms of accuracy and positioning errors. The performance is assessed using different AP layouts, distinct AP vendors, and different frequency bands. The accuracy and precision of the RTT-based position estimation is always better than the one obtained with RSS in all the studied scenarios, and especially when few APs are available. In addition, all the considered ML algorithms perform pretty well. As a result, it is not necessary to use more complex solutions (e.g., SVM) when simpler ones (e.g., nearest neighbor classifiers) achieve similar results both in terms of accuracy and location error.
- 20 May 2021
- Published by Springer Nature in Universal Access in the Information Society
- Vol. 21 (4) , 827-849
Design and evaluation of ECO: an augmentative and alternative communication tool
- 20 May 2021
- Published by Springer Nature in Universal Access in the Information Society
- Vol. 21 (4) , 827-849
Design and evaluation of ECO: an augmentative and alternative communication tool
- Open Access
- 24 July 2020
- Published by MDPI AG in Electronics
- Vol. 9 (8) , 1193
Passive Round-Trip-Time Positioning in Dense IEEE 802.11 Networks
The search for a unique and globally available location solution has attracted researchers for a long time. However, a solution for indoor scenarios, where high accuracy is needed, and Global Positioning System (GPS) is not available, has not been found yet. Despite the number of proposals in the literature, some require too long a calibration time for constructing the fingerprinting map, some rely on the periodic broadcast of positioning information that may downgrade the data communication channel, while others require specific hardware components that are not expected to be carried on commercial off-the-shelf (COTS) wireless devices. The scalability of the location solution is another key parameter for next-generation internet of things (IoT) and 5G scenarios. A passive solution for indoor positioning of WiFi devices is first introduced here, which merges a time-difference of arrival (TDOA) algorithm with the novel fine time measurements (FTM) introduced in IEEE 802.11mc. A proof of concept of the WiFi passive TDOA algorithm is detailed in this paper, together with a thorough discussion on the requirements of the proposed algorithm.
- 24 July 2020
- Published by MDPI AG in Electronics
- Vol. 9 (8) , 1193
Open AccessPassive Round-Trip-Time Positioning in Dense IEEE 802.11 Networks
The search for a unique and globally available location solution has attracted researchers for a long time. However, a solution for indoor scenarios, where high accuracy is needed, and Global Positioning System (GPS) is not available, has not been found yet. Despite the number of proposals in the literature, some require too long a calibration time for constructing the fingerprinting map, some rely on the periodic broadcast of positioning information that may downgrade the data communication channel, while others require specific hardware components that are not expected to be carried on commercial off-the-shelf (COTS) wireless devices. The scalability of the location solution is another key parameter for next-generation internet of things (IoT) and 5G scenarios. A passive solution for indoor positioning of WiFi devices is first introduced here, which merges a time-difference of arrival (TDOA) algorithm with the novel fine time measurements (FTM) introduced in IEEE 802.11mc. A proof of concept of the WiFi passive TDOA algorithm is detailed in this paper, together with a thorough discussion on the requirements of the proposed algorithm.
- Open Access
- 4 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 96714-96726
A Robust User Association, Backhaul Routing, and Switching Off Model for a 5G Network With Variable Traffic Demands
With the expected increase in data traffic (e.g., video) and in the user devices generating new traffic (e.g., device-to-device communication, Internet of Things, etc.), the evolution of next-generation mobile networks (e.g., 5G networks) has gone towards heterogeneous deployments where multiple small cells coexist in the same area covered by a macro base station. To reduce the capital expenses in the network, a wireless mesh can be used, which is made of millimeter-wave links that route the data traffic of the mobile users inside the backhaul network. Such an increase in the number of deployed base stations inevitably increases the power consumption; hence, the operating expenses and the CO2 consumption also increase. To achieve greener mobile communications, sleep-mode strategies have been considered in order to switch off the unused network components. However, the switching on/off should be made according to the traffic demanded by the users and with the aim of guaranteeing the demanded service at any time. Given that the traffic demand and networking traffic fluctuate over time at each location, we propose a robust mixed integer linear problem that jointly solves the user association, the backhaul routing paths in the wireless mesh and the switching off of the unused links with the aim of minimizing the power consumption. The robust strategy is based on the Γ-robust approach and is able to guarantee the user demand while taking into account its intrinsic variability. A thorough evaluation has been performed in order to analyze the impact of the robust strategy on the network performance.
- 4 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 96714-96726
Open AccessA Robust User Association, Backhaul Routing, and Switching Off Model for a 5G Network With Variable Traffic Demands
With the expected increase in data traffic (e.g., video) and in the user devices generating new traffic (e.g., device-to-device communication, Internet of Things, etc.), the evolution of next-generation mobile networks (e.g., 5G networks) has gone towards heterogeneous deployments where multiple small cells coexist in the same area covered by a macro base station. To reduce the capital expenses in the network, a wireless mesh can be used, which is made of millimeter-wave links that route the data traffic of the mobile users inside the backhaul network. Such an increase in the number of deployed base stations inevitably increases the power consumption; hence, the operating expenses and the CO2 consumption also increase. To achieve greener mobile communications, sleep-mode strategies have been considered in order to switch off the unused network components. However, the switching on/off should be made according to the traffic demanded by the users and with the aim of guaranteeing the demanded service at any time. Given that the traffic demand and networking traffic fluctuate over time at each location, we propose a robust mixed integer linear problem that jointly solves the user association, the backhaul routing paths in the wireless mesh and the switching off of the unused links with the aim of minimizing the power consumption. The robust strategy is based on the Γ-robust approach and is able to guarantee the user demand while taking into account its intrinsic variability. A thorough evaluation has been performed in order to analyze the impact of the robust strategy on the network performance.
- Open Access
- 25 June 2019
- Published by Association for Computing Machinery (ACM)
- p. 1-8
Expert-based Assessment of an Augmentative and Alternative Communication Tool
- 25 June 2019
- Published by Association for Computing Machinery (ACM)
- p. 1-8
Open AccessExpert-based Assessment of an Augmentative and Alternative Communication Tool