Kenneth Hernández-Burgos
Research Subjects
Kenneth Hernández-Burgos has a total of 81 co-authors. Here are the top co-authors by number of shared publications:
- Joaquín Rodríguez-López
Department of Chemistry, University of Illinois Urbana-Champaign, Urbana, IL 61801, USA
10 shared publications Gabriel G. Rodríguez-Calero
Department of Chemistry and Chemical Biology, Baker Laboratory, Cornell University, Ithaca, New York 14853-1301, USA
6 shared publicationsHéctor D. Abruña
Department of Chemistry and Chemical Biology, Baker Laboratory, Cornell University, Ithaca, New York 14853-1301, USA
6 shared publications- Elena C. Montoto
University of Illinois at Urbana-Champaign
4 shared publications - Hector D. Abruna
Cornell University
4 shared publications Mark Burgess
Joint Center for Energy Storage Research , Argonne, Illinois 60439, United States
4 shared publications
Latest Publications
- 1 December 2019
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 141 (51) , 19978-19982
A Solid-Solution Approach for Redox Active Metal–Organic Frameworks with Tunable Redox Conductivity
Systematically tuning the conductivity of metal–organic frameworks (MOFs) is key to synergizing their attractive synthetic control and porosity with electrochemical attributes useful in energy and sensing technologies. A priori control of charge transfer is possible by exploiting the solid-solution properties of MOFs together with electronic self-exchange enabled by redox pendants. Here we introduce a new strategy for preparing redox-active MOF thin-film electrodes with finely tuned redox pendant content. Varying the ratios of alkyl-ferrocene containing redox-active and inactive links during MOF synthesis enabled the fabrication of electrodes with tunable redox conductivity. The prepared MOF electrodes display maximum electron conductivity of 1.10 mS m–1, with crystallographic and electrochemical stability upon thousands of redox cycles. Electroanalytical studies demonstrated that the conductivity follows solution-like diffusion-controlled behavior with nonlinear electron diffusion coefficients consistent with charge hopping and percolation models of spatially fixed redox centers. Our studies create new prospects in the design and synthesis of redox-active MOFs with targeted properties for the design of advanced electrochemical devices.
- 1 December 2019
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 141 (51) , 19978-19982
A Solid-Solution Approach for Redox Active Metal–Organic Frameworks with Tunable Redox Conductivity
Systematically tuning the conductivity of metal–organic frameworks (MOFs) is key to synergizing their attractive synthetic control and porosity with electrochemical attributes useful in energy and sensing technologies. A priori control of charge transfer is possible by exploiting the solid-solution properties of MOFs together with electronic self-exchange enabled by redox pendants. Here we introduce a new strategy for preparing redox-active MOF thin-film electrodes with finely tuned redox pendant content. Varying the ratios of alkyl-ferrocene containing redox-active and inactive links during MOF synthesis enabled the fabrication of electrodes with tunable redox conductivity. The prepared MOF electrodes display maximum electron conductivity of 1.10 mS m–1, with crystallographic and electrochemical stability upon thousands of redox cycles. Electroanalytical studies demonstrated that the conductivity follows solution-like diffusion-controlled behavior with nonlinear electron diffusion coefficients consistent with charge hopping and percolation models of spatially fixed redox centers. Our studies create new prospects in the design and synthesis of redox-active MOFs with targeted properties for the design of advanced electrochemical devices.
- 14 November 2018
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 91 (1) , 60-83
Advanced Electrochemical Analysis for Energy Storage Interfaces
- 14 November 2018
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 91 (1) , 60-83
Advanced Electrochemical Analysis for Energy Storage Interfaces
- 23 April 2018
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 51 (10) , 3539-3546
Effect of the Backbone Tether on the Electrochemical Properties of Soluble Cyclopropenium Redox-Active Polymers
- 23 April 2018
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 51 (10) , 3539-3546
Effect of the Backbone Tether on the Electrochemical Properties of Soluble Cyclopropenium Redox-Active Polymers
- 5 February 2018
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 140 (6) , 2093-2104
Modulation of the Electrochemical Reactivity of Solubilized Redox Active Polymers via Polyelectrolyte Dynamics
Redox active polymers (RAPs) are electrochemically versatile materials that find key applications in energy storage, sensing, and surface modification. In spite of the ubiquity of RAP-modified electrodes, a critical knowledge gap exists in the understanding of the electrochemistry of soluble RAPs and their relation to polyelectrolyte dynamics. Here, we explore for the first time the intersection between polyelectrolyte behavior and the electrochemical response that highly soluble and highly substituted RAPs with viologen, ferrocene, and nitrostyrene moieties elicit at electrodes. This comprehensive study of RAP electrolytes over several orders of magnitude in concentration and ionic strength reveals distinct signatures consistent with surface confined, colloidal, and bulk-like electrochemical behavior. These differences emerge across polyelectrolyte packing regimes and are strongly modulated by changes in RAP coil size and electrostatic interactions with the electrode. We found that, unlike monomer motifs, simple changes in the ionic strength caused variations over one order of magnitude in the current measured at the electrode. In addition, the thermodynamics of adsorbed RAP films were also affected, giving rise to standard reduction potential shifts leading to redox kinetic effects as a result of the mediating nature of the RAP film in equilibrium with the solution. Full electrochemical characterization via transient and steady-state techniques, including the use of ultramicroelectrodes and the rotating disk electrode, were correlated to dynamic light scattering, ellipsometry, and viscometric analysis. These methods helped elucidate the relationship between electrochemical behavior and RAP coil size, film thickness, and polyelectrolyte packing regime. This study underscores the role of electrostatics in modulating the reactivity of redox polyelectrolytes.
- 5 February 2018
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 140 (6) , 2093-2104
Modulation of the Electrochemical Reactivity of Solubilized Redox Active Polymers via Polyelectrolyte Dynamics
Redox active polymers (RAPs) are electrochemically versatile materials that find key applications in energy storage, sensing, and surface modification. In spite of the ubiquity of RAP-modified electrodes, a critical knowledge gap exists in the understanding of the electrochemistry of soluble RAPs and their relation to polyelectrolyte dynamics. Here, we explore for the first time the intersection between polyelectrolyte behavior and the electrochemical response that highly soluble and highly substituted RAPs with viologen, ferrocene, and nitrostyrene moieties elicit at electrodes. This comprehensive study of RAP electrolytes over several orders of magnitude in concentration and ionic strength reveals distinct signatures consistent with surface confined, colloidal, and bulk-like electrochemical behavior. These differences emerge across polyelectrolyte packing regimes and are strongly modulated by changes in RAP coil size and electrostatic interactions with the electrode. We found that, unlike monomer motifs, simple changes in the ionic strength caused variations over one order of magnitude in the current measured at the electrode. In addition, the thermodynamics of adsorbed RAP films were also affected, giving rise to standard reduction potential shifts leading to redox kinetic effects as a result of the mediating nature of the RAP film in equilibrium with the solution. Full electrochemical characterization via transient and steady-state techniques, including the use of ultramicroelectrodes and the rotating disk electrode, were correlated to dynamic light scattering, ellipsometry, and viscometric analysis. These methods helped elucidate the relationship between electrochemical behavior and RAP coil size, film thickness, and polyelectrolyte packing regime. This study underscores the role of electrostatics in modulating the reactivity of redox polyelectrolytes.
- 6 September 2017
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 29 (21) , 8918-8931
Finding Harmony between Ions and Electrons: New Tools and Concepts for Emerging Energy Storage Materials
- 6 September 2017
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 29 (21) , 8918-8931
Finding Harmony between Ions and Electrons: New Tools and Concepts for Emerging Energy Storage Materials
- Open Access
- 11 July 2017
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164 (9) , A1946-A1951
Hybrid Organic Electrodes: The Rational Design and Synthesis of High-Energy Redox-Active Pendant Functionalized Polypyrroles for Electrochemical Energy Storage
In an effort to dramatically increase the capacity and electronic conductivity of organic-based redox active materials for electrochemical/electrical energy storage applications, polypyrrole (PPy) has been used as an anchoring backbone to form a family of dimethoxybenzene- (DMB-), bis(methylthio)benzene- (BMTB-), N, N, N’, N’-tetramethylphenylenediamine- (TMPD-), and N, N, N’, N’-tetramethylbenzidine- (TMB-) functionalized redox-active polymers. PPy was deliberately modified to provide an electronically conducting backbone with redox active pendants (RAPs) to enable immobilization (via electropolymerization) of the polymers onto current collectors. The RAPs dramatically increase the capacities of the materials by the reversible exchange of multiple electrons per formula unit. The electropolymerization of the pyrrole-anchored RAP monomers was achieved via cyclic voltammetry. The stability of the electropolymerized films was highly dependent upon the redox potential of the RAPs. The effects of charge density, during the electropolymerization process, were studied by varying the structure of the monomers. By the systematic characterization of the electrochemical properties of the electropolymerized films, the electrochemical behavior of these polymers provides validation of our targeted design to maximize the energy density of organic electrode materials for electrical energy storage applications.
- 11 July 2017
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164 (9) , A1946-A1951
Open AccessHybrid Organic Electrodes: The Rational Design and Synthesis of High-Energy Redox-Active Pendant Functionalized Polypyrroles for Electrochemical Energy Storage
In an effort to dramatically increase the capacity and electronic conductivity of organic-based redox active materials for electrochemical/electrical energy storage applications, polypyrrole (PPy) has been used as an anchoring backbone to form a family of dimethoxybenzene- (DMB-), bis(methylthio)benzene- (BMTB-), N, N, N’, N’-tetramethylphenylenediamine- (TMPD-), and N, N, N’, N’-tetramethylbenzidine- (TMB-) functionalized redox-active polymers. PPy was deliberately modified to provide an electronically conducting backbone with redox active pendants (RAPs) to enable immobilization (via electropolymerization) of the polymers onto current collectors. The RAPs dramatically increase the capacities of the materials by the reversible exchange of multiple electrons per formula unit. The electropolymerization of the pyrrole-anchored RAP monomers was achieved via cyclic voltammetry. The stability of the electropolymerized films was highly dependent upon the redox potential of the RAPs. The effects of charge density, during the electropolymerization process, were studied by varying the structure of the monomers. By the systematic characterization of the electrochemical properties of the electropolymerized films, the electrochemical behavior of these polymers provides validation of our targeted design to maximize the energy density of organic electrode materials for electrical energy storage applications.
- 28 June 2017
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 33 (37) , 9455-9463
Interrogating Charge Storage on Redox Active Colloids via Combined Raman Spectroscopy and Scanning Electrochemical Microscopy
Redox active colloids (RACs) are dispersible, cross-linked polymeric materials that incorporate a high concentration of redox-active motifs, making them attractive for next-generation size-exclusion redox flow batteries. In order to tap into their full potential for energy storage, it is essential to understand their internal charge mobility, capacity, and cyclability. Here we focus on using a combined suite of Raman spectroscopy and scanning electrochemical microscopy (SECM) tools for evaluating three important parameters that govern charge storage in viologen-RACs: their intraparticle redox active concentration, their reduction/oxidation mechanism, and their charge transfer rate. We addressed RACs using SECM imaging and single-particle experiments, from which the intraparticle diffusion and concentration parameters were elucidated. By using Raman spectroscopy coupled to surface interrogation SECM, we further evaluated their reversible redox properties within monolayer films of 80- and 135-nm-sized RACs. Most notably we have confirmed that the concentration and redox mechanisms are essentially unchanged when varying the RAC size. As expected, we see that larger particles inherently require longer times for electrolysis independent of the methodology used for their study. Our simulations further verify the internal concentration of RACs and suggest that their porosity enables solution redox active mediators to penetrate and titrate charge in their interior. The combined methodology presented here sets an important analytical precedent in decoupling the charge storage properties of new bulk materials for polymer batteries starting from probing low-dimensional assemblies and single particles using nano- and spectroelectrochemical approaches.
- 28 June 2017
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 33 (37) , 9455-9463
Interrogating Charge Storage on Redox Active Colloids via Combined Raman Spectroscopy and Scanning Electrochemical Microscopy
Redox active colloids (RACs) are dispersible, cross-linked polymeric materials that incorporate a high concentration of redox-active motifs, making them attractive for next-generation size-exclusion redox flow batteries. In order to tap into their full potential for energy storage, it is essential to understand their internal charge mobility, capacity, and cyclability. Here we focus on using a combined suite of Raman spectroscopy and scanning electrochemical microscopy (SECM) tools for evaluating three important parameters that govern charge storage in viologen-RACs: their intraparticle redox active concentration, their reduction/oxidation mechanism, and their charge transfer rate. We addressed RACs using SECM imaging and single-particle experiments, from which the intraparticle diffusion and concentration parameters were elucidated. By using Raman spectroscopy coupled to surface interrogation SECM, we further evaluated their reversible redox properties within monolayer films of 80- and 135-nm-sized RACs. Most notably we have confirmed that the concentration and redox mechanisms are essentially unchanged when varying the RAC size. As expected, we see that larger particles inherently require longer times for electrolysis independent of the methodology used for their study. Our simulations further verify the internal concentration of RACs and suggest that their porosity enables solution redox active mediators to penetrate and titrate charge in their interior. The combined methodology presented here sets an important analytical precedent in decoupling the charge storage properties of new bulk materials for polymer batteries starting from probing low-dimensional assemblies and single particles using nano- and spectroelectrochemical approaches.
- 13 October 2016
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 28 (20) , 7362-7374
Impact of Backbone Tether Length and Structure on the Electrochemical Performance of Viologen Redox Active Polymers
- 13 October 2016
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 28 (20) , 7362-7374
Impact of Backbone Tether Length and Structure on the Electrochemical Performance of Viologen Redox Active Polymers
- 29 September 2016
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 138 (40) , 13230-13237
Redox Active Colloids as Discrete Energy Storage Carriers
Versatile and readily available battery materials compatible with a range of electrode configurations and cell designs are desirable for renewable energy storage. Here we report a promising class of materials based on redox active colloids (RACs) that are inherently modular in their design and overcome challenges faced by small-molecule organic materials for battery applications, such as crossover and chemical/morphological stability. RACs are cross-linked polymer spheres, synthesized with uniform diameters between 80 and 800 nm, and exhibit reversible redox activity as single particles, as monolayer films, and in the form of flowable dispersions. Viologen-based RACs display reversible cycling, accessing up to 99% of their capacity and 99 ± 1% Coulombic efficiency over 50 cycles by bulk electrolysis owing to efficient, long-distance intraparticle charge transfer. Ferrocene-based RACs paired with viologen-based RACs cycled efficiently in a nonaqueous redox flow battery employing a simple size-selective separator, thus demonstrating a possible application that benefits from their colloidal dimensions. The unprecedented versatility in RAC synthetic and electrochemical design opens new avenues for energy storage.
- 29 September 2016
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 138 (40) , 13230-13237
Redox Active Colloids as Discrete Energy Storage Carriers
Versatile and readily available battery materials compatible with a range of electrode configurations and cell designs are desirable for renewable energy storage. Here we report a promising class of materials based on redox active colloids (RACs) that are inherently modular in their design and overcome challenges faced by small-molecule organic materials for battery applications, such as crossover and chemical/morphological stability. RACs are cross-linked polymer spheres, synthesized with uniform diameters between 80 and 800 nm, and exhibit reversible redox activity as single particles, as monolayer films, and in the form of flowable dispersions. Viologen-based RACs display reversible cycling, accessing up to 99% of their capacity and 99 ± 1% Coulombic efficiency over 50 cycles by bulk electrolysis owing to efficient, long-distance intraparticle charge transfer. Ferrocene-based RACs paired with viologen-based RACs cycled efficiently in a nonaqueous redox flow battery employing a simple size-selective separator, thus demonstrating a possible application that benefits from their colloidal dimensions. The unprecedented versatility in RAC synthetic and electrochemical design opens new avenues for energy storage.
- 30 March 2016
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 141 (12) , 3842-3850
Impact of electrolyte composition on the reactivity of a redox active polymer studied through surface interrogation and ion-sensitive scanning electrochemical microscopy
Elucidating the impact of interactions between the electrolyte and electroactive species in redox active polymers is key to designing better-performing electrodes for electrochemical energy storage and conversion. Here, we present on the improvement of the electrochemical activity of poly(para-nitrostyrene) (PNS) in solution and as a film by exploiting the ionic interactions between reduced PNS and K+, which showed increased reactivity when compared to tetrabutylammonium (TBA+)- and Li+-containing electrolytes. While cyclic voltammetry enabled the study of the effects of cations on the electrochemical reversibility and the reduction potential of PNS, scanning electrochemical microscopy (SECM) provided new tools to probe the ionic and redox reactivity of this system. Using an ion-sensitive Hg SECM tip allowed to probe the ingress of ions into PNS redox active films, while surface interrogation SECM (SI-SECM) measured the specific kinetics of PNS and a solution phase mediator in the presence of the tested electrolytes. SI-SECM measurements illustrated that the interrogation kinetics of PNS in the presence of K+ compared to TBA+ and Li+ are greatly enhanced under the same surface concentration of adsorbed radical anion, exhibiting up to a 40-fold change in redox kinetics. We foresee using this new application of SECM methods for elucidating optimal interactions that enhance polymer reactivity for applications in redox flow batteries.
- 30 March 2016
- Published by Royal Society of Chemistry (RSC) in The Analyst
- Vol. 141 (12) , 3842-3850
Impact of electrolyte composition on the reactivity of a redox active polymer studied through surface interrogation and ion-sensitive scanning electrochemical microscopy
Elucidating the impact of interactions between the electrolyte and electroactive species in redox active polymers is key to designing better-performing electrodes for electrochemical energy storage and conversion. Here, we present on the improvement of the electrochemical activity of poly(para-nitrostyrene) (PNS) in solution and as a film by exploiting the ionic interactions between reduced PNS and K+, which showed increased reactivity when compared to tetrabutylammonium (TBA+)- and Li+-containing electrolytes. While cyclic voltammetry enabled the study of the effects of cations on the electrochemical reversibility and the reduction potential of PNS, scanning electrochemical microscopy (SECM) provided new tools to probe the ionic and redox reactivity of this system. Using an ion-sensitive Hg SECM tip allowed to probe the ingress of ions into PNS redox active films, while surface interrogation SECM (SI-SECM) measured the specific kinetics of PNS and a solution phase mediator in the presence of the tested electrolytes. SI-SECM measurements illustrated that the interrogation kinetics of PNS in the presence of K+ compared to TBA+ and Li+ are greatly enhanced under the same surface concentration of adsorbed radical anion, exhibiting up to a 40-fold change in redox kinetics. We foresee using this new application of SECM methods for elucidating optimal interactions that enhance polymer reactivity for applications in redox flow batteries.