USUrban Svedberg

Urban Svedberg

*This is an algorithmically generated author record based on publicly available information.

Urban Svedberg has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Occurrence of Fumigants and Hazardous Off-gassing Chemicals in Shipping Containers Arriving in Sweden

    by Urban Svedberg, Gunnar Johanson

    Containerized cargo shipment makes up the backbone of international trade. The principal aim of this cross-sectional study was to establish a qualitative and quantitative description of gaseous fumigants and volatile off-gassing substances facing workers tasked with entering shipping containers. A total of 372 packed and 119 empty shipping containers were sampled in six ports and two distribution centers in Sweden. Fourier-transform infrared spectrometry (FTIR) and photoionization detection (PID) were the analytical methods applied to the bulk of samples. A small number of adsorbent samples were analyzed using gas chromatography–mass spectrometry (GC–MS). The results were compared to Swedish occupational exposure limits (OELs), the closest parallel to relevant work situations. Based on the FTIR analyses, 30 of 249 (12%) containers arrived with concentrations of fumigants and off-gassing substances above the 8-h OELs and close to 7% were above the short-term exposure limits. Eight detected chemicals were classified as carcinogens and 4% of the containers arrived with levels of carcinogens above the OELs, at a maximum 30 times the 8-h OEL. Considerable differences were observed between ports, ranging from 0 to 33% of containers arriving with concentrations above the OELs. It is believed that all observation results, apart from a single instance of a confirmed fumigant, phosphine, at 3 p.p.m., and possibly three instances of carbon dioxide, can be attributed to off-gassing substances. The FTIR methodology proved useful for quick preliminary checks and in-depth screening and identification. The PID method produced both false-negative and false-positive results where only 48% matched the FTIR observations. Adsorbent sampling with GC–MS analysis was useful for confirming volatile organic compounds but was deemed too slow for day-to-day screening. The high frequency of contaminated containers, the detection of several carcinogens, and the sporadic occurrences of high levels of fumigants are serious concerns that need to be properly recognized in order to protect the workers at risk.


  • Open Access

    Work Inside Ocean Freight Containers—Personal Exposure to Off-Gassing Chemicals

    by Urban Svedberg, Gunnar Johanson

    More than 500 million ocean freight container units are shipped annually between countries and continents. Residual levels of fumigants, as well as naturally occurring off-gassing chemicals emanating from the goods, constitute safety risks, which may affect uniformed workers upon entering the container. The aim of this study was to assess workers' exposure during stripping of containers and is the first study of its kind. First, an experimental tracer gas method was investigated to determine its usefulness to approximate real exposures from gaseous fumigants and off-gassing volatile organic compounds (VOCs). Nitrous oxide was injected and left to distribute in the closed containers. The distribution of the tracer gas and initial (arrival) concentrations of off-gassing volatiles were measured prior to opening the containers. Second, personal exposure (breathing zone) and work zone air monitoring of both tracer gas and VOCs were carried out during stripping. Adsorbent tubes, bag samples, and direct-readings instruments (photoionization detector and Fourier transform infrared spectrometry) were used. The distribution studies with nitrous oxide, and the high correlation between the former and VOCs (r(2) ~ 0.8) during stripping, showed that the tracer gas method may well be used to approximate real exposures in containers. The average breathing zone and work zone concentrations during stripping of naturally ventilated 40-foot containers were 1-7% of the arrival concentrations; however, peaks up to 70% were seen during opening. Even if average exposures during stripping are significantly lower than arrival concentrations, they may still represent serious violations of occupational exposure limits in high-risk containers. The results from this and previous studies illustrate the need to establish practices for the safe handling of ocean freight containers. Until comprehensive recommendations are in place, personnel that need to enter such containers should, in addition to appropriate personal protective equipment, have access to equipment for measuring contaminants and for applying forced ventilation when necessary.


  • Open Access

    Oxygen Depletion and Formation of Toxic Gases following Sea Transportation of Logs and Wood Chips

    by Urban Svedberg, Caroline Petrini, Gunnar Johanson

    Several recent accidents with fatal outcomes occurring during discharge of logs and wood chips from ships in Swedish ports indicate the need to better understand the atmospheric conditions in holds and connecting stairways. The principal aim of the present study was to assess the air levels of oxygen and toxic gases in confined spaces following sea transportation of logs and wood chips. The focus of the study was the conditions in the stairways, as this was the location of the reported accidents. Forty-one shipments of logs (pulpwood) and wood chips carried by 10 different ships were investigated before discharge in ports in northern Sweden. A full year was covered to accommodate variations due to seasonal temperature changes. The time from completion of loading to discharge was estimated to be 37-66 h (mean 46 h). Air samples were collected in the undisturbed air of altogether 76 stairways before the hatch covers were removed. The oxygen level was measured on-site by handheld direct-reading multi-gas monitors. On 16 of the shipments, air samples were additionally collected in Tedlar bags for later analysis for carbon dioxide, carbon monoxide, and hydrocarbons by fourier transform infrared spectroscopy. The mean oxygen level was 10% (n = 76) but in 17% of the samples the oxygen level was 0%. The oxygen depletion was less pronounced during the cold season. The mean CO2 and CO levels were 7.5% (n = 26) and 46 p.p.m. (n = 28), respectively. More than 90% of the hydrocarbons were explained by monoterpenes, mainly alpha-pinene (mean 41 p.p.m., (n = 26). In conclusion, the measurements show that transport of logs and wood chips in confined spaces may result in rapid and severe oxygen depletion and CO(2) formation. Thus, apparently harmless cargoes may create potentially life-threatening conditions. The oxygen depletion and CO(2) formation are seemingly primarily caused by microbiological activity, in contrast to the oxidative processes with higher CO formation that predominate in cargoes of wood pellets. Improved technical and organizational measures are considered necessary to prevent future accidents. Recommendations given regarding safe entry procedures and technical preventive methods may also apply to other oxygen-depleting products.


  • Open Access

    Hazardous Off-Gassing of Carbon Monoxide and Oxygen Depletion during Ocean Transportation of Wood Pellets

    by Urban Svedberg, Jerker Samuelsson, Staffan Melin

    Five ocean vessels were investigated for the characterization and quantification of gaseous compounds emitted during ocean transportation of wood pellets in closed cargo hatches from Canada to Sweden. The study was initiated after a fatal accident with several injured during discharge in Sweden. The objective with the investigation was to better understand the off-gassing and issues related to workers' exposure. Air sampling was done during transport and immediately before discharge in the undisturbed headspace air above the wood pellets and in the staircase adjacent to each hatch. The samples were analyzed with Fourier transform infrared spectroscopy and direct reading instruments. The following compounds and ranges were detected in samples from the five ships: carbon monoxide (CO) 1460–14650 ppm, carbon dioxide (CO2) 2960–21570 ppm, methane 79.9–956 ppm, butane equivalents 63–842 ppm, ethylene 2–21.2 ppm, propylene 5.3–36 ppm, ethane 0–25 ppm and aldehydes 2.3–35 ppm. The oxygen levels were between 0.8 and 16.9%. The concentrations in the staircases were almost as high as in the cargo hatches, indicating a fairly free passage of air between the two spaces. A potentially dangerous atmosphere was reached within a week from loading. The conclusions are that ocean transportation of wood pellets in confined spaces may produce an oxygen deficient atmosphere and lethal levels of CO which may leak into adjacent access spaces. The dangerous combination of extremely high levels of CO and reduced oxygen produces a fast-acting toxic combination. Measurement of CO in combination with oxygen is essential prior to entry in spaces having air communication with cargo hatches of wood pellets. Forced ventilation of staircases prior to entry is necessary. Redesign, locking and labeling of access doors and the establishment of rigorous entry procedures and training of onboard crew as well as personnel boarding ocean vessels are also important.


  • Acute Effects of Exposure to Hexanal Vapors in Humans

    by Lena Ernstgård, Anders Iregren, Bengt Sjögren, Urban Svedberg, Gunnar Johanson

    N-Hexanal is a major component in emissions from stored wood pellets. The production and use of wood pellets has increased dramatically. Our aim was to evaluate acute health effects of n-hexanal vapors. Twelve healthy volunteers were exposed to 0, 2, and 10 ppm n-hexanal for 2 hours at rest in a balanced order. Ratings of discomfort in the eyes and nose, solvent smell, and headache increased significantly with the level of exposure. Frequency of blinking was significantly increased at 10 ppm. No effects on pulmonary function and nasal swelling were detected, except a not-significant tendency to increased nasal obstruction at 10 ppm. No clear effects on plasma inflammatory markers (C-reactive protein and interleukin-6) were observed. Two hours of exposure to n-hexanal results in mild irritation at 10 ppm, with no apparent adversity at 2 ppm.


  • Open Access

    Emission of Hexanal and Carbon Monoxide from Storage of Wood Pellets, a Potential Occupational and Domestic Health Hazard

    by Urban R. A. Svedberg, Hans-Erik Högberg, Johan Högberg, Bo Galle

    Objectives: The objective of the present study was to investigate and describe the emissions of volatile compounds, particularly hexanal and carbon monoxide, from large- and small-scale storage of wood pellets. Methods: Air sampling was performed with Fourier transform infrared spectroscopy and adsorbent sampling in pellet warehouses, domestic storage rooms, lumber kiln dryers and experimental set-ups. Literature studies were included to describe the formation of hexanal and carbon monoxide and the toxicology of hexanal. Results: A geometric mean aldehyde level of 111 ± 32 mg/m3 was found in one warehouse, with a peak reading of 156 mg/m3. A maximum aldehyde reading of 457 mg/m3 was recorded at the surface of a pellet pile. Hexanal (70–80% w/w) and pentanal (10–15% w/w) dominated, but acetone (83 ± 24 mg/m3), methanol (18 ± 7 mg/m3) and carbon monoxide (56 ± 4 mg/m3) were also found. The emissions in a domestic storage room varied with the ambient temperature and peaked after 2 months storage in the midst of the warm season. Aldehyde levels of 98 ± 4 mg/m3 and carbon monoxide levels of 123 ± 10 mg/m3 were recorded inside such storage rooms. Elevated levels of hexanal (0.084 mg/m3) were recorded inside domestic housing and 6 mg/m3 in a room adjacent to a poorly sealed storage area. Experimental laboratory studies confirmed the findings of the field studies. A field study of the emissions from industrial lumber drying also showed the formation of aldehydes and carbon monoxide. Conclusions: High levels of hexanal and carbon monoxide were strongly associated with storage of wood pellets and may constitute an occupational and domestic health hazard. The results from lumber drying show that the emissions of hexanal and carbon monoxide are not limited to wood pellets but are caused by general degradation processes of wood, facilitated by drying at elevated temperature. Emission of carbon monoxide from wood materials at low temperatures (<100°C) has not previously been reported in the literature. We postulate that carbon monoxide is formed due to autoxidative degradation of fats and fatty acids. A toxicological literature survey showed that the available scientific information on hexanal is insufficient to determine the potential risks to health. However, the data presented in this paper seem sufficient to undertake preventive measures to reduce exposure to hexanal.


  • Open Access

    CorrigendumEmission of Hexanal and Carbon Monoxide from Storage of Wood Pellets, a Potential Occupational and Domestic Health Hazard

    by Urban R. A. Svedberg, Hans-Erik Högberg, Johan Högberg, Bo Galle

    Annals of Occupational Hygiene, 4, 339–349; published online on 10 March 2004


  • Characterization and Control of Terpene Emissions in Finnish Sawmills

    by Irma Welling, Timo Mielo, Jouni Räisänen, Markku Hyvärinen, Tuula Liukkonen, Timo Nurkka, Pirjo Lonka, Christina Rosenberg, Yrjö Peltonen, Urban Svedberg, et al.

    This article describes an experimental study of terpene emission rates during fresh pine and spruce sawing and processing. Total terpene emission was determined by summing the product of the exhaust airflow rate and the mean concentration in the exhaust. Terpene concentrations were measured at fixed sampling points between the sawing lines. Terpene emission during pine sawing was found to be around 10 times greater than that during spruce sawing. The emission rates given here can be used to predict emission rates for various production rates. The predicted emission rates can be used in mass balance models to predict concentrations or required airflow rates to achieve the target concentration level.


  • Contact urticaria with anaphylactic reactions caused by occupational exposure to iridium salt

    by Anita Bergman, Urban Svedberg, Eskil Nilsson

    This paper presents the case of a non‐smoking and non‐atopic male, exposed to indium chloride at work, who developed respiratory tract symptoms and contact urticaria. Application of indium salt to normal skin caused contact urticaria. An iridium chloride prick test showed a positive reaction and a scratch test produced anaphylactoid reactions. Platinum salt allergy was excluded through prick testing with hexachloroplatinate solution. There is no previous report describing a case where an individual has a positive prick test reaction to iridium salts and simultaneously a negative one to platinum salts. The results are interpreted as immediate‐type hypersensitivity (Type I allergy?) to iridium salt. The route of sensitization was probably through the airways. Further testing showed that iridium salt allergy could persist for at least 18 months after exposure ceases. 14 employees at the same factory were prick tested with iridium and platinum salts with negative results. Prick testing is recommended as a method of first choice when investigating a person with suspected indium salt allergy.