Constantinos Katsimpouras
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Constantinos Katsimpouras has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Evangelos Topakas
Biotechnology Laboratory, School of Chemical Engineering, National Technical University of Athens, 5 Iroon Polytechniou Str., Zografou Campus, Athens 15780, Greece
9 shared publications - Paul Christakopoulos
Luleå University of Technology
4 shared publications Grigorios Dedes
Industrial Biotechnology & Biocatalysis Group, School of Chemical Engineering, National Technical University of Athens, 9 Iroon Polytechniou Str., Zografou Campus, 15780 Athens, Greece
2 shared publications- Maria Dimarogona
Laboratory of Structural Biology and Biotechnology, Department of Chemical Engineering, University of Patras, Patras, Greece
2 shared publications - Aggeliki Kalogianni
Chemical Process and Energy Resources Institute (CPERI), CERTH, 6th km Harilaou-Thermi Road, Thermi, 57001 Thessalonica, Greece
1 shared publication Anaïs Bénarouche
INRA, Aix Marseille Université, UMR1163, Polytech Marseille
1 shared publication
Latest Publications
- 1 July 2020
- Published by Elsevier in Trends in Biotechnology
- Vol. 38 (7) , 811-822
Novel Strategies and Platforms for Industrial Isoprenoid Engineering
- 1 July 2020
- Published by Elsevier in Trends in Biotechnology
- Vol. 38 (7) , 811-822
Novel Strategies and Platforms for Industrial Isoprenoid Engineering
- Open Access
- 11 May 2019
- Published by Springer Nature in Biotechnology for Biofuels
- Vol. 12 (1) , 1-14
A novel fungal GH30 xylanase with xylobiohydrolase auxiliary activity
The main representatives of hemicellulose are xylans, usually decorated β-1,4-linked d-xylose polymers, which are hydrolyzed by xylanases. The efficient utilization and complete hydrolysis of xylans necessitate the understanding of the mode of action of xylan degrading enzymes. The glycoside hydrolase family 30 (GH30) xylanases comprise a less studied group of such enzymes, and differences regarding the substrate recognition have been reported between fungal and bacterial GH30 xylanases. Besides their role in the utilization of lignocellulosic biomass for bioenergy, such enzymes could be used for the tailored production of prebiotic xylooligosaccharides (XOS) due to their substrate specificity. The expression of a putative GH30_7 xylanase from the fungus Thermothelomyces thermophila (synonyms Myceliophthora thermophila, Sporotrichum thermophile) in Pichia pastoris resulted in the production and isolation of a novel xylanase with unique catalytic properties. The novel enzyme designated TtXyn30A, exhibited an endo- mode of action similar to that of bacterial GH30 xylanases that require 4-O-methyl-d-glucuronic acid (MeGlcA) decorations, in contrast to most characterized fungal ones. However, TtXyn30A also exhibited an exo-acting catalytic behavior by releasing the disaccharide xylobiose from the non-reducing end of XOS. The hydrolysis products from beechwood glucuronoxylan were MeGlcA substituted XOS, and xylobiose. The major uronic XOS (UXOS) were the aldotriuronic and aldotetrauronic acid after longer incubation indicating the ability of TtXyn30A to cleave linear parts of xylan and UXOS as well. Hereby, we reported the heterologous production and biochemical characterization of a novel fungal GH30 xylanase exhibiting endo- and exo-xylanase activity. To date, considering its novel catalytic properties, TtXyn30A shows differences with most characterized fungal and bacterial GH30 xylanases. The discovered xylobiohydrolase mode of action offers new insights into fungal enzymatic systems that are employed for the utilization of lignocellulosic biomass. The recombinant xylanase could be used for the production of X2 and UXOS from glucuronoxylan, which in turn would be utilized as prebiotics carrying manifold health benefits.
- 11 May 2019
- Published by Springer Nature in Biotechnology for Biofuels
- Vol. 12 (1) , 1-14
Open AccessA novel fungal GH30 xylanase with xylobiohydrolase auxiliary activity
The main representatives of hemicellulose are xylans, usually decorated β-1,4-linked d-xylose polymers, which are hydrolyzed by xylanases. The efficient utilization and complete hydrolysis of xylans necessitate the understanding of the mode of action of xylan degrading enzymes. The glycoside hydrolase family 30 (GH30) xylanases comprise a less studied group of such enzymes, and differences regarding the substrate recognition have been reported between fungal and bacterial GH30 xylanases. Besides their role in the utilization of lignocellulosic biomass for bioenergy, such enzymes could be used for the tailored production of prebiotic xylooligosaccharides (XOS) due to their substrate specificity. The expression of a putative GH30_7 xylanase from the fungus Thermothelomyces thermophila (synonyms Myceliophthora thermophila, Sporotrichum thermophile) in Pichia pastoris resulted in the production and isolation of a novel xylanase with unique catalytic properties. The novel enzyme designated TtXyn30A, exhibited an endo- mode of action similar to that of bacterial GH30 xylanases that require 4-O-methyl-d-glucuronic acid (MeGlcA) decorations, in contrast to most characterized fungal ones. However, TtXyn30A also exhibited an exo-acting catalytic behavior by releasing the disaccharide xylobiose from the non-reducing end of XOS. The hydrolysis products from beechwood glucuronoxylan were MeGlcA substituted XOS, and xylobiose. The major uronic XOS (UXOS) were the aldotriuronic and aldotetrauronic acid after longer incubation indicating the ability of TtXyn30A to cleave linear parts of xylan and UXOS as well. Hereby, we reported the heterologous production and biochemical characterization of a novel fungal GH30 xylanase exhibiting endo- and exo-xylanase activity. To date, considering its novel catalytic properties, TtXyn30A shows differences with most characterized fungal and bacterial GH30 xylanases. The discovered xylobiohydrolase mode of action offers new insights into fungal enzymatic systems that are employed for the utilization of lignocellulosic biomass. The recombinant xylanase could be used for the production of X2 and UXOS from glucuronoxylan, which in turn would be utilized as prebiotics carrying manifold health benefits.
- 1 December 2018
- Published by Elsevier in Bioresource Technology
- Vol. 270, 208-215
Acetone/water oxidation of corn stover for the production of bioethanol and prebiotic oligosaccharides
- 1 December 2018
- Published by Elsevier in Bioresource Technology
- Vol. 270, 208-215
Acetone/water oxidation of corn stover for the production of bioethanol and prebiotic oligosaccharides
- 1 November 2017
- Published by Elsevier in Bioresource Technology
- Vol. 244, 1129-1136
Sequential high gravity ethanol fermentation and anaerobic digestion of steam explosion and organosolv pretreated corn stover
- 1 November 2017
- Published by Elsevier in Bioresource Technology
- Vol. 244, 1129-1136
Sequential high gravity ethanol fermentation and anaerobic digestion of steam explosion and organosolv pretreated corn stover
- 1 May 2017
- Published by Elsevier in Biomass and Bioenergy
- Vol. 100, 10-16
Organosolv pretreatment of wheat straw for efficient ethanol production using various solvents
- 1 May 2017
- Published by Elsevier in Biomass and Bioenergy
- Vol. 100, 10-16
Organosolv pretreatment of wheat straw for efficient ethanol production using various solvents
- Open Access
- 28 February 2017
- Published by Springer Nature in Biotechnology for Biofuels
- Vol. 10 (1) , 1-16
Production of high concentrated cellulosic ethanol by acetone/water oxidized pretreated beech wood
Lignocellulosic biomass is an abundant and inexpensive resource for biofuel production. Alongside its biotechnological conversion, pretreatment is essential to enable efficient enzymatic hydrolysis by making cellulose susceptible to cellulases. Wet oxidation of biomass, such as acetone/water oxidation, that employs hot acetone, water, and oxygen, has been found to be an attractive pretreatment method for removing lignin while producing less degradation products. The remaining enriched cellulose fraction has the potential to be utilized under high gravity enzymatic saccharification and fermentation processes for the cost-competing production of bioethanol. Beech wood residual biomass was pretreated following an acetone/water oxidation process aiming at the production of high concentration of cellulosic ethanol. The effect of pressure, reaction time, temperature, and acetone-to-water ratio on the final composition of the pretreated samples was studied for the efficient utilization of the lignocellulosic feedstock. The optimal conditions were acetone/water ratio 1:1, 40 atm initial pressure of 40 vol% O2 gas, and 64 atm at reaction temperature of 175 °C for 2 h incubation. The pretreated beech wood underwent an optimization step studying the effect of enzyme loading and solids content on the enzymatic liquefaction/saccharification prior to fermentation. In a custom designed free-fall mixer at 50 °C for either 6 or 12 h of prehydrolysis using an enzyme loading of 9 mg/g dry matter at 20 wt% initial solids content, high ethanol concentration of 75.9 g/L was obtained. The optimization of the pretreatment process allowed the efficient utilization of beech wood residual biomass for the production of high concentrations of cellulosic ethanol, while obtaining lignin that can be upgraded towards high-added-value chemicals. The threshold of 4 wt% ethanol concentration that is required for the sustainable bioethanol production was surpassed almost twofold, underpinning the efficient conversion of biomass to ethanol and bio-based chemicals on behalf of the biorefinery concept.
- 28 February 2017
- Published by Springer Nature in Biotechnology for Biofuels
- Vol. 10 (1) , 1-16
Open AccessProduction of high concentrated cellulosic ethanol by acetone/water oxidized pretreated beech wood
Lignocellulosic biomass is an abundant and inexpensive resource for biofuel production. Alongside its biotechnological conversion, pretreatment is essential to enable efficient enzymatic hydrolysis by making cellulose susceptible to cellulases. Wet oxidation of biomass, such as acetone/water oxidation, that employs hot acetone, water, and oxygen, has been found to be an attractive pretreatment method for removing lignin while producing less degradation products. The remaining enriched cellulose fraction has the potential to be utilized under high gravity enzymatic saccharification and fermentation processes for the cost-competing production of bioethanol. Beech wood residual biomass was pretreated following an acetone/water oxidation process aiming at the production of high concentration of cellulosic ethanol. The effect of pressure, reaction time, temperature, and acetone-to-water ratio on the final composition of the pretreated samples was studied for the efficient utilization of the lignocellulosic feedstock. The optimal conditions were acetone/water ratio 1:1, 40 atm initial pressure of 40 vol% O2 gas, and 64 atm at reaction temperature of 175 °C for 2 h incubation. The pretreated beech wood underwent an optimization step studying the effect of enzyme loading and solids content on the enzymatic liquefaction/saccharification prior to fermentation. In a custom designed free-fall mixer at 50 °C for either 6 or 12 h of prehydrolysis using an enzyme loading of 9 mg/g dry matter at 20 wt% initial solids content, high ethanol concentration of 75.9 g/L was obtained. The optimization of the pretreatment process allowed the efficient utilization of beech wood residual biomass for the production of high concentrations of cellulosic ethanol, while obtaining lignin that can be upgraded towards high-added-value chemicals. The threshold of 4 wt% ethanol concentration that is required for the sustainable bioethanol production was surpassed almost twofold, underpinning the efficient conversion of biomass to ethanol and bio-based chemicals on behalf of the biorefinery concept.
- 26 October 2016
- Published by Springer Nature
- p. 79-123
Role and Applications of Feruloyl Esterases in Biomass Bioconversion
- 26 October 2016
- Published by Springer Nature
- p. 79-123
Role and Applications of Feruloyl Esterases in Biomass Bioconversion
- 19 May 2016
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 100 (19) , 8385-8397
A thermostable GH26 endo-β-mannanase from Myceliophthora thermophila capable of enhancing lignocellulose degradation
The endomannanase gene em26a from the thermophilic fungus Myceliophthora thermophila, belonging to the glycoside hydrolase family 26, was functionally expressed in the methylotrophic yeast Pichia pastoris. The putative endomannanase, dubbed MtMan26A, was purified to homogeneity (60 kDa) and subsequently characterized. The optimum pH and temperature for the enzymatic activity of MtMan26A were 6.0 and 60 °C, respectively. MtMan26A showed high specific activity against konjac glucomannan and carob galactomannan, while it also exhibited high thermal stability with a half-life of 14.4 h at 60 °C. Thermostability is of great importance, especially in industrial processes where harsh conditions are employed. With the aim of better understanding its structure–function relationships, a homology model of MtMan26A was constructed, based on the crystallographic structure of a close homologue. Finally, the addition of MtMan26A as a supplement to the commercial enzyme mixture Celluclast® 1.5 L and Novozyme® 188 resulted in enhanced enzymatic hydrolysis of pretreated beechwood sawdust, improving the release of total reducing sugars and glucose by 13 and 12 %, respectively.
- 19 May 2016
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 100 (19) , 8385-8397
A thermostable GH26 endo-β-mannanase from Myceliophthora thermophila capable of enhancing lignocellulose degradation
The endomannanase gene em26a from the thermophilic fungus Myceliophthora thermophila, belonging to the glycoside hydrolase family 26, was functionally expressed in the methylotrophic yeast Pichia pastoris. The putative endomannanase, dubbed MtMan26A, was purified to homogeneity (60 kDa) and subsequently characterized. The optimum pH and temperature for the enzymatic activity of MtMan26A were 6.0 and 60 °C, respectively. MtMan26A showed high specific activity against konjac glucomannan and carob galactomannan, while it also exhibited high thermal stability with a half-life of 14.4 h at 60 °C. Thermostability is of great importance, especially in industrial processes where harsh conditions are employed. With the aim of better understanding its structure–function relationships, a homology model of MtMan26A was constructed, based on the crystallographic structure of a close homologue. Finally, the addition of MtMan26A as a supplement to the commercial enzyme mixture Celluclast® 1.5 L and Novozyme® 188 resulted in enhanced enzymatic hydrolysis of pretreated beechwood sawdust, improving the release of total reducing sugars and glucose by 13 and 12 %, respectively.
- 4 May 2016
- Published by Springer Nature in Bioprocess and Biosystems Engineering
- Vol. 39 (9) , 1415-1423
Acetic acid-catalyzed hydrothermal pretreatment of corn stover for the production of bioethanol at high-solids content
Corn stover (CS) was hydrothermally pretreated using CH3COOH (0.3 %, v/v), and subsequently its ability to be utilized for conversion to ethanol at high-solids content was investigated. Pretreatment conditions were optimized employing a response surface methodology (RSM) with temperature and duration as independent variables. Pretreated CS underwent a liquefaction/saccharification step at a custom designed free-fall mixer at 50 °C for either 12 or 24 h using an enzyme loading of 9 mg/g dry matter (DM) at 24 % (w/w) DM. Simultaneous enzymatic saccharification and fermentation (SSF) of liquefacted corn stover resulted in high ethanol concentration (up to 36.8 g/L), with liquefaction duration having a negligible effect. The threshold of ethanol concentration of 4 % (w/w), which is required to reduce the cost of ethanol distillation, was surpassed by the addition of extra enzymes at the start up of SSF achieving this way ethanol titer of 41.5 g/L.
- 4 May 2016
- Published by Springer Nature in Bioprocess and Biosystems Engineering
- Vol. 39 (9) , 1415-1423
Acetic acid-catalyzed hydrothermal pretreatment of corn stover for the production of bioethanol at high-solids content
Corn stover (CS) was hydrothermally pretreated using CH3COOH (0.3 %, v/v), and subsequently its ability to be utilized for conversion to ethanol at high-solids content was investigated. Pretreatment conditions were optimized employing a response surface methodology (RSM) with temperature and duration as independent variables. Pretreated CS underwent a liquefaction/saccharification step at a custom designed free-fall mixer at 50 °C for either 12 or 24 h using an enzyme loading of 9 mg/g dry matter (DM) at 24 % (w/w) DM. Simultaneous enzymatic saccharification and fermentation (SSF) of liquefacted corn stover resulted in high ethanol concentration (up to 36.8 g/L), with liquefaction duration having a negligible effect. The threshold of ethanol concentration of 4 % (w/w), which is required to reduce the cost of ethanol distillation, was surpassed by the addition of extra enzymes at the start up of SSF achieving this way ethanol titer of 41.5 g/L.
- 16 February 2014
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 98 (12) , 5507-5516
Enzymatic synthesis of model substrates recognized by glucuronoyl esterases from Podospora anserina and Myceliophthora thermophila
Glucuronoyl esterases (GEs) are recently discovered enzymes that are suggested to cleave the ester bond between lignin alcohols and xylan-bound 4-O-methyl-d-glucuronic acid. Although their potential use for enhanced enzymatic biomass degradation and synthesis of valuable chemicals renders them attractive research targets for biotechnological applications, the difficulty to purify natural fractions of lignin-carbohydrate complexes hampers the characterization of fungal GEs. In this work, we report the synthesis of three aryl alkyl or alkenyl d-glucuronate esters using lipase B from Candida antarctica (CALB) and their use to determine the kinetic parameters of two GEs, StGE2 from the thermophilic fungus Myceliophthora thermophila (syn. Sporotrichum thermophile) and PaGE1 from the coprophilous fungus Podospora anserina. PaGE1 was functionally expressed in the methylotrophic yeast Pichia pastoris under the transcriptional control of the alcohol oxidase (AOX1) promoter and purified to its homogeneity (63 kDa). The three d-glucuronate esters contain an aromatic UV-absorbing phenol group that facilitates the quantification of their enzymatic hydrolysis by HPLC. Both enzymes were able to hydrolyze the synthetic esters with a pronounced preference towards the cinnamyl-d-glucuronate ester. The experimental results were corroborated by computational docking of the synthesized substrate analogues. We show that the nature of the alcohol portion of the hydrolyzed ester influences the catalytic efficiency of the two GEs.
- 16 February 2014
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 98 (12) , 5507-5516
Enzymatic synthesis of model substrates recognized by glucuronoyl esterases from Podospora anserina and Myceliophthora thermophila
Glucuronoyl esterases (GEs) are recently discovered enzymes that are suggested to cleave the ester bond between lignin alcohols and xylan-bound 4-O-methyl-d-glucuronic acid. Although their potential use for enhanced enzymatic biomass degradation and synthesis of valuable chemicals renders them attractive research targets for biotechnological applications, the difficulty to purify natural fractions of lignin-carbohydrate complexes hampers the characterization of fungal GEs. In this work, we report the synthesis of three aryl alkyl or alkenyl d-glucuronate esters using lipase B from Candida antarctica (CALB) and their use to determine the kinetic parameters of two GEs, StGE2 from the thermophilic fungus Myceliophthora thermophila (syn. Sporotrichum thermophile) and PaGE1 from the coprophilous fungus Podospora anserina. PaGE1 was functionally expressed in the methylotrophic yeast Pichia pastoris under the transcriptional control of the alcohol oxidase (AOX1) promoter and purified to its homogeneity (63 kDa). The three d-glucuronate esters contain an aromatic UV-absorbing phenol group that facilitates the quantification of their enzymatic hydrolysis by HPLC. Both enzymes were able to hydrolyze the synthetic esters with a pronounced preference towards the cinnamyl-d-glucuronate ester. The experimental results were corroborated by computational docking of the synthesized substrate analogues. We show that the nature of the alcohol portion of the hydrolyzed ester influences the catalytic efficiency of the two GEs.