Yongpeng Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Yongpeng Xu has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
- Fuyi Cui
College of Urban Construction and Environmental Engineering, Chongqing University, Chongqing 400044, China
9 shared publications Fuyi Cui
School of Environment and Ecology, Chongqing University, Chongqing, 400044, China
7 shared publicationsTing Chen
State Key Laboratory of Urban Water Resource and Environment, School of Municipal and Environmental Engineering, Harbin Institute of Technology, Harbin 150090, People’s Republic of China, Tel. +86 13946110707
5 shared publicationsWenxin Shi
State Key Laboratory of Urban Water Resource and Environment, School of Municipal and Environmental Engineering, Harbin Institute of Technology, Harbin 150090, China
5 shared publications- Zhiquan Liu
Institute of Environmental Research at Greater Bay, Key Laboratory for Water Quality and Conservation of the Pearl River Delta, Ministry of Education, Guangzhou University, Guangzhou 510006, China
4 shared publications Zhiwei Zhao
Logistical Engineering University of PLA, Chongqing 401311, China
4 shared publications
Latest Publications
- Open Access
- 27 August 2021
- Published by IWA Publishing in Water Supply
- Vol. 22 (1) , 170-180
Investigation on the fate of quinolone antibiotics in three drinking water treatment plants of China
Quinolone (QN) antibiotics are widely used all over the world and have been frequently detected in source water, but the occurrence in tap water and the treatment efficiencies of QNs by drinking-water treatment plants (DWTPs) were rarely reported. In the present study, the occurrence and distribution of six representative QNs in three urban DWTPs of China were investigated. The results showed that the concentrations of total QNs in the three source waters ranged from 26.4 ng/L to 313.8 ng/L and all of the six QNs were detectable with a detection frequency of 100% (4.6 to 121.7 ng/L). Enrofloxacin (ENR) and ofloxacin (OFL) were the dominant species of QNs and accounted for 40.1% to 79.5% of the total QNs. After the treatments, there were still considerable QNs in the finished water (total amounts of 74.9 ng/L to 148.4 ng/L). The adsorbed QNs could be readily treated with the removal of turbidity by DWTPs, but only a part of the dissolved QNs (13.6% to 68.5%) can be removed. This implies that the dissolved QNs were more hazardous in the source water. Pre-oxidation and disinfection could remove 15.8 ± 8.3% and 16.9 ± 10.8% of dissolved QNs, respectively, depending on the chemical structure of QNs and the types of oxidant. Chemical oxidation was more efficient than coagulation-sedimentation and filtration for the treatment of dissolved QNs. Ozone-granular activated carbon filtration may fail to remove dissolved QNs in the actual DWTPs, because of the insufficient dosage of oxidant and the competition effect of natural organic matter.
- 27 August 2021
- Published by IWA Publishing in Water Supply
- Vol. 22 (1) , 170-180
Open AccessInvestigation on the fate of quinolone antibiotics in three drinking water treatment plants of China
Quinolone (QN) antibiotics are widely used all over the world and have been frequently detected in source water, but the occurrence in tap water and the treatment efficiencies of QNs by drinking-water treatment plants (DWTPs) were rarely reported. In the present study, the occurrence and distribution of six representative QNs in three urban DWTPs of China were investigated. The results showed that the concentrations of total QNs in the three source waters ranged from 26.4 ng/L to 313.8 ng/L and all of the six QNs were detectable with a detection frequency of 100% (4.6 to 121.7 ng/L). Enrofloxacin (ENR) and ofloxacin (OFL) were the dominant species of QNs and accounted for 40.1% to 79.5% of the total QNs. After the treatments, there were still considerable QNs in the finished water (total amounts of 74.9 ng/L to 148.4 ng/L). The adsorbed QNs could be readily treated with the removal of turbidity by DWTPs, but only a part of the dissolved QNs (13.6% to 68.5%) can be removed. This implies that the dissolved QNs were more hazardous in the source water. Pre-oxidation and disinfection could remove 15.8 ± 8.3% and 16.9 ± 10.8% of dissolved QNs, respectively, depending on the chemical structure of QNs and the types of oxidant. Chemical oxidation was more efficient than coagulation-sedimentation and filtration for the treatment of dissolved QNs. Ozone-granular activated carbon filtration may fail to remove dissolved QNs in the actual DWTPs, because of the insufficient dosage of oxidant and the competition effect of natural organic matter.
- 21 November 2017
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Nano
- Vol. 5 (2) , 338-349
Interfacial electronic effects of palladium nanocatalysts on the by-product ammonia selectivity during nitrite catalytic reduction
Catalytic denitrification is an emerging technology that can remove nitrate and nitrite from water. However, the undesirable formation of ammonia requires further suppression. By preparing three types of Pd-based nanocatalysts with different electronic structures as model catalysts, we demonstrate the interfacial electronic effects induced by ethanol (EtOH) and 1-dodecanethiol (C12T) modifications on the selectivity of nitrite catalytic reduction. XPS and in situ DRIFTS spectral characterization studies illustrate that the electron density of the Pd surface atoms increased with the ethanol modification and decreased with the 1-dodecanethiol modification. The nitrite reduction results show that the Pd–EtOH@MIL-101 catalyst (Pdδ−) exhibited an unexpectedly low ammonia selectivity of 0.31%, while a higher value of 10.18% was obtained for the Pd–C12T@MIL-101 catalyst (Pdδ+), which indicated that the electronic structure of Pd can control the ammonia selectivity during the nitrite reduction. Thermodynamics studies revealed that increasing the electron density of the Pd surface atoms reduced the nitrite reaction activation energy and changed the reaction pathways, which resulted in a significant decrease in the ammonia selectivity. The results in this paper may provide new insight into designing and optimizing Pd-based catalysts with low ammonia selectivity for nitrate and nitrite catalytic reduction.
- 21 November 2017
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Nano
- Vol. 5 (2) , 338-349
Interfacial electronic effects of palladium nanocatalysts on the by-product ammonia selectivity during nitrite catalytic reduction
Catalytic denitrification is an emerging technology that can remove nitrate and nitrite from water. However, the undesirable formation of ammonia requires further suppression. By preparing three types of Pd-based nanocatalysts with different electronic structures as model catalysts, we demonstrate the interfacial electronic effects induced by ethanol (EtOH) and 1-dodecanethiol (C12T) modifications on the selectivity of nitrite catalytic reduction. XPS and in situ DRIFTS spectral characterization studies illustrate that the electron density of the Pd surface atoms increased with the ethanol modification and decreased with the 1-dodecanethiol modification. The nitrite reduction results show that the Pd–EtOH@MIL-101 catalyst (Pdδ−) exhibited an unexpectedly low ammonia selectivity of 0.31%, while a higher value of 10.18% was obtained for the Pd–C12T@MIL-101 catalyst (Pdδ+), which indicated that the electronic structure of Pd can control the ammonia selectivity during the nitrite reduction. Thermodynamics studies revealed that increasing the electron density of the Pd surface atoms reduced the nitrite reaction activation energy and changed the reaction pathways, which resulted in a significant decrease in the ammonia selectivity. The results in this paper may provide new insight into designing and optimizing Pd-based catalysts with low ammonia selectivity for nitrate and nitrite catalytic reduction.
- 1 May 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 143 (5)
Effect of Continuous Direct Recycling of Combined Residual Streams on Water Quality at the Pilot Scale in Different Seasons
The overall objective of this study is to conduct pilot-scale experiments to examine the effects of the direct continuous recycling of combined residual streams (CRS) of clarifier sludge (CS) and filter backwash water (FBWW) on effluent quality in summer and winter. Specifically, the parameters of sedimentation and filtration effluent quality such as turbidity, color, organic matter [e.g., dissolved organic carbon (DOC) and total organic carbon (TOC)], ultraviolet absorbance at 254 nm ( ), Trihalomethane formation potentials (THMFPs), and metallic elements (e.g., Fe, Al, and Mn) were measured. The experimental results indicate that the continuous direct recycling of the CRS is a feasible method for not only reducing the required coagulant dosage but also improving the contaminant removal efficiency. The coagulant usage was reduced by up to 33.33% at 20°C and 25.00% at 4°C compared to control trials. Over the entire operation period, there was no significant accumulation of contaminants. The temperature exerted a significant impact on the required coagulant dosage and treatment efficiency. Additionally, this study proposes that the continuous operation periods are at the range of 10 to 12 days.- 1 May 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Environmental Engineering
- Vol. 143 (5)
Effect of Continuous Direct Recycling of Combined Residual Streams on Water Quality at the Pilot Scale in Different Seasons
The overall objective of this study is to conduct pilot-scale experiments to examine the effects of the direct continuous recycling of combined residual streams (CRS) of clarifier sludge (CS) and filter backwash water (FBWW) on effluent quality in summer and winter. Specifically, the parameters of sedimentation and filtration effluent quality such as turbidity, color, organic matter [e.g., dissolved organic carbon (DOC) and total organic carbon (TOC)], ultraviolet absorbance at 254 nm ( ), Trihalomethane formation potentials (THMFPs), and metallic elements (e.g., Fe, Al, and Mn) were measured. The experimental results indicate that the continuous direct recycling of the CRS is a feasible method for not only reducing the required coagulant dosage but also improving the contaminant removal efficiency. The coagulant usage was reduced by up to 33.33% at 20°C and 25.00% at 4°C compared to control trials. Over the entire operation period, there was no significant accumulation of contaminants. The temperature exerted a significant impact on the required coagulant dosage and treatment efficiency. Additionally, this study proposes that the continuous operation periods are at the range of 10 to 12 days.- 28 September 2016
- Published by IWA Publishing in Water Supply
- Vol. 17 (2) , 597-605
Does the recycling of waste streams from drinking water treatment plants worsen the quality of finished water? A case assessment in China
The overall purpose was to assess the feasibilities of recycling filter backwash water (FBWW) and combined filter backwash water (CFBWW) in a drinking water treatment plant in south China. The variations of regular water-quality indexes, metal indexes (Al, Mn and Cd), polyacrylamide and disinfection by-product indexes (trihalomethanes and their formation potentials) along with the treatment and the recycling processes were monitored. Results showed the recycling procedure caused increases of turbidity, total solids, ammonia nitrogen (NH3-N), permanganate index (CODMn), and dissolved organic carbon, Al, Mn and Cd concentrations in a mixture of raw water and FBWW or CFBWW compared to those in raw water. However, the recycling procedure had negligible impacts on the qualities of settled water and filtered water because most of the contaminants could be effectively removed by the conventional water treatment process. Although recycling did cause slight increases of NH3-N and CODMn levels in settled water and filtered water, the quality of finished water always conformed to Chinese standards for drinking water quality according to the surveyed indexes in the present study. Thus, it is appropriate to recycle waste streams in water-stressed areas if the source water is well managed and the water treatment processes are carefully conducted.
- 28 September 2016
- Published by IWA Publishing in Water Supply
- Vol. 17 (2) , 597-605
Does the recycling of waste streams from drinking water treatment plants worsen the quality of finished water? A case assessment in China
The overall purpose was to assess the feasibilities of recycling filter backwash water (FBWW) and combined filter backwash water (CFBWW) in a drinking water treatment plant in south China. The variations of regular water-quality indexes, metal indexes (Al, Mn and Cd), polyacrylamide and disinfection by-product indexes (trihalomethanes and their formation potentials) along with the treatment and the recycling processes were monitored. Results showed the recycling procedure caused increases of turbidity, total solids, ammonia nitrogen (NH3-N), permanganate index (CODMn), and dissolved organic carbon, Al, Mn and Cd concentrations in a mixture of raw water and FBWW or CFBWW compared to those in raw water. However, the recycling procedure had negligible impacts on the qualities of settled water and filtered water because most of the contaminants could be effectively removed by the conventional water treatment process. Although recycling did cause slight increases of NH3-N and CODMn levels in settled water and filtered water, the quality of finished water always conformed to Chinese standards for drinking water quality according to the surveyed indexes in the present study. Thus, it is appropriate to recycle waste streams in water-stressed areas if the source water is well managed and the water treatment processes are carefully conducted.
- 18 July 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 4 (33) , 12799-12806
Carbon nanofiber matrix with embedded LaCO 3 OH synchronously captures phosphate and organic carbon to starve bacteria
Carbon nanofibers with embedded LaCO 3 OH synchronously remove phosphate and organic matter to realize bacterial starvation.
- 18 July 2016
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 4 (33) , 12799-12806
Carbon nanofiber matrix with embedded LaCO 3 OH synchronously captures phosphate and organic carbon to starve bacteria
Carbon nanofibers with embedded LaCO 3 OH synchronously remove phosphate and organic matter to realize bacterial starvation.
- Open Access
- 1 July 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (31) , 14433-14442
The impact of recycling sludge on water quality in coagulation for treating low-turbidity source water
There is an alternative method for the treatment of low-turbidity source water that reuses coagulation sludge as low-turbidity raw water to enhance conventional coagulation efficiency. This research investigated the impact of the recycling ration by volume of coagulation sludge on enhancing the removal efficiency of specific water quality parameters in a pilot-scale experiment with a capacity of 5 m3/h. This novel test was first continuously run for 150 h (15 recycling runs), and the recycling sludge was cycle used. The results showed a significantly higher removal efficiency of turbidity from the raw water than that of the traditional process, which was probably attributed to the special long-range Van der Waals attractive force, the enhancement of the collision ratio among particles, and the similar “second dosage of coagulant” strategy after the recycling process. Charge neutralization and absorption have mainly enhanced the removal efficiency of organic matter with recycling sludge. To some extent, this enhancement is due to the open and porous structure of the reused sludge, which could absorb the metal ions and further remove them following the sedimentation process. Recycling sludge is a feasible and successful method to enhance pollutant removal and has a significant effect on the treatment of low-turbidity source water.
- 1 July 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (31) , 14433-14442
Open AccessThe impact of recycling sludge on water quality in coagulation for treating low-turbidity source water
There is an alternative method for the treatment of low-turbidity source water that reuses coagulation sludge as low-turbidity raw water to enhance conventional coagulation efficiency. This research investigated the impact of the recycling ration by volume of coagulation sludge on enhancing the removal efficiency of specific water quality parameters in a pilot-scale experiment with a capacity of 5 m3/h. This novel test was first continuously run for 150 h (15 recycling runs), and the recycling sludge was cycle used. The results showed a significantly higher removal efficiency of turbidity from the raw water than that of the traditional process, which was probably attributed to the special long-range Van der Waals attractive force, the enhancement of the collision ratio among particles, and the similar “second dosage of coagulant” strategy after the recycling process. Charge neutralization and absorption have mainly enhanced the removal efficiency of organic matter with recycling sludge. To some extent, this enhancement is due to the open and porous structure of the reused sludge, which could absorb the metal ions and further remove them following the sedimentation process. Recycling sludge is a feasible and successful method to enhance pollutant removal and has a significant effect on the treatment of low-turbidity source water.
- Open Access
- 1 July 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (18) , 8217-8227
Reproduction of Staurastrum sp. within a water treatment plant caused by the recycle of combined sludge water and backwash water: a field investigation
- 1 July 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (18) , 8217-8227
Open AccessReproduction of Staurastrum sp. within a water treatment plant caused by the recycle of combined sludge water and backwash water: a field investigation
- 1 April 2016
- Published by Elsevier in Journal of Environmental Sciences
- Vol. 42, 61-70
Evaluation of drinking water treatment combined filter backwash water recycling technology based on comet and micronucleus assay
- 1 April 2016
- Published by Elsevier in Journal of Environmental Sciences
- Vol. 42, 61-70
Evaluation of drinking water treatment combined filter backwash water recycling technology based on comet and micronucleus assay
- 1 March 2016
- Published by Elsevier in Chemical Engineering Journal
- Vol. 287, 225-232
Effect of reused alum-humic-flocs on coagulation performance and floc characteristics formed by aluminum salt coagulants in humic-acid water
- 1 March 2016
- Published by Elsevier in Chemical Engineering Journal
- Vol. 287, 225-232
Effect of reused alum-humic-flocs on coagulation performance and floc characteristics formed by aluminum salt coagulants in humic-acid water
- Open Access
- 1 March 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (15) , 6732-6739
Impact of recycling alum sludge on coagulation of low-turbidity source waters
This research project evaluated the recycling performance of alum sludge (AS), formed during sedimentation process in drinking water treatment, to enhance coagulation of low-turbidity source water. The results indicated that the recycling of AS effectively enhanced coagulation, when the optimal blended water turbidity was in the range of 13.6–21.7 NTU, with solid content of 0.072–0.124%. Furthermore, recycling AS could reduce up to 40% of fresh coagulant dosage in coagulation–sedimentation process. Bench-scale experiment results showed recycling AS prior to coagulation had insignificant effect on effluent water quality for all measured parameters: color, NH3-N, CODMn, UV254, aluminum, and manganese. Scanning electron microscopy evidence revealed that the floc structures with AS were more smooth and more compact than that without AS. It was postulated that the aluminum hydroxide precipitate in AS provide nucleating sites for physical collision and that sweep coagulation might play a key role in the enhancement of coagulation in low-turbidity source water.
- 1 March 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (15) , 6732-6739
Open AccessImpact of recycling alum sludge on coagulation of low-turbidity source waters
This research project evaluated the recycling performance of alum sludge (AS), formed during sedimentation process in drinking water treatment, to enhance coagulation of low-turbidity source water. The results indicated that the recycling of AS effectively enhanced coagulation, when the optimal blended water turbidity was in the range of 13.6–21.7 NTU, with solid content of 0.072–0.124%. Furthermore, recycling AS could reduce up to 40% of fresh coagulant dosage in coagulation–sedimentation process. Bench-scale experiment results showed recycling AS prior to coagulation had insignificant effect on effluent water quality for all measured parameters: color, NH3-N, CODMn, UV254, aluminum, and manganese. Scanning electron microscopy evidence revealed that the floc structures with AS were more smooth and more compact than that without AS. It was postulated that the aluminum hydroxide precipitate in AS provide nucleating sites for physical collision and that sweep coagulation might play a key role in the enhancement of coagulation in low-turbidity source water.