Xiaomin Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaomin Chen has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
- Qiuming Zhu
Nanjing University of Aeronautics and Astronautics
29 shared publications - Weizhi Zhong
Nanjing University of Aeronautics and Astronautics
14 shared publications - Kai Mao
College of Electronic and Information Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China
13 shared publications - Boyu Hua
College of Electronic and Information Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China
11 shared publications - Farman Ali
Qurtuba University of Sciences and Information Technology
4 shared publications - Zhipeng Lin
Key Laboratory of Dynamic Cognitive System of Electromagnetic Spectrum Space, College of Electronic and Information Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China
4 shared publications
Latest Publications
- Open Access
Cooperative Monostatic and Bistatic Measurements for Low-Altitude UAV ISAC: System Implementation and Channel Characterization
Low-altitude unmanned aerial vehicle (UAV)-integrated sensing and communication (ISAC) channels are governed by rapidly evolving multipath. These dynamics arise from UAV motion, air–ground geometry, and scene-dependent scatterers, yet field evidence comparing monostatic and bistatic sensing links remains limited. We develop a cooperative monostatic–bistatic measurement system for low-altitude UAV ISAC channel sounding. The system integrates a UAV-borne sensing node, a ground node, synchronized acquisition, and an offline processing chain. It enables UAV-borne monostatic sensing and air–ground bistatic sensing to be measured within the same low-altitude urban scenario. A field measurement campaign is conducted along a representative route containing buildings, trees, roadside facilities, and open ground. From the measured in-phase/quadrature (IQ) data, the system extracts channel impulse responses (CIRs) and power delay profiles (PDPs) as primary measurement products. Delay–Doppler processing, multipath-component extraction, and trajectory analysis are applied to compare link-dependent propagation behavior under matched environmental conditions. The measurement results demonstrate that the proposed platform can jointly capture monostatic and bistatic ISAC channel responses and support controlled and synchronized low-altitude UAV channel measurement experiments. This system provides an experimental basis for UAV ISAC channel modeling, measurement-platform assessment, and subsequent sensing algorithm evaluation.
Open AccessCooperative Monostatic and Bistatic Measurements for Low-Altitude UAV ISAC: System Implementation and Channel Characterization
Low-altitude unmanned aerial vehicle (UAV)-integrated sensing and communication (ISAC) channels are governed by rapidly evolving multipath. These dynamics arise from UAV motion, air–ground geometry, and scene-dependent scatterers, yet field evidence comparing monostatic and bistatic sensing links remains limited. We develop a cooperative monostatic–bistatic measurement system for low-altitude UAV ISAC channel sounding. The system integrates a UAV-borne sensing node, a ground node, synchronized acquisition, and an offline processing chain. It enables UAV-borne monostatic sensing and air–ground bistatic sensing to be measured within the same low-altitude urban scenario. A field measurement campaign is conducted along a representative route containing buildings, trees, roadside facilities, and open ground. From the measured in-phase/quadrature (IQ) data, the system extracts channel impulse responses (CIRs) and power delay profiles (PDPs) as primary measurement products. Delay–Doppler processing, multipath-component extraction, and trajectory analysis are applied to compare link-dependent propagation behavior under matched environmental conditions. The measurement results demonstrate that the proposed platform can jointly capture monostatic and bistatic ISAC channel responses and support controlled and synchronized low-altitude UAV channel measurement experiments. This system provides an experimental basis for UAV ISAC channel modeling, measurement-platform assessment, and subsequent sensing algorithm evaluation.
- 17 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 74 (00906778) , 5412-5427
Measurement-Driven Cluster Power Generation Method for a Hybrid A2G Channel Model
Drones are expected to be promising aerial platforms in air-to-ground (A2G) integrated communication networks, where the A2G propagation channel is fundamental for reliable communication links. This paper proposes a hybrid parameter generation framework combining the deterministic and statistical methods for a cluster-based A2G channel model. In this framework, the map-based deterministic method is used to generate delay and angle parameters, which can achieve great scenario consistency. However, it is difficult for users to provide precise material information of scatterers, which would cause deviation of power parameters. To tackle this issue, a measurement-driven power generation method is proposed. Firstly, a bandwidth-dependent clustering method is developed to group the rays into clusters. Then, the cluster power is generated by measurement-driven statistical models with a power-decomposition idea. It decomposes the power parameter into several parts that are less dependent on the scenario. Moreover, it can avoid massive measurement campaigns and is more robust when applied in unmeasured scenarios. Finally, a new channel measurement campaign in a street canyon scenario is performed for validations. The proposed method is also compared with a ray-tracing (RT) method and the 3rd Generation Partnership Project (3GPP) channel model. It is shown that the proposed framework and power generation method are great alternatives for accurate and robust modeling requirements under specific A2G communication scenarios.
- 17 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 74 (00906778) , 5412-5427
Measurement-Driven Cluster Power Generation Method for a Hybrid A2G Channel Model
Drones are expected to be promising aerial platforms in air-to-ground (A2G) integrated communication networks, where the A2G propagation channel is fundamental for reliable communication links. This paper proposes a hybrid parameter generation framework combining the deterministic and statistical methods for a cluster-based A2G channel model. In this framework, the map-based deterministic method is used to generate delay and angle parameters, which can achieve great scenario consistency. However, it is difficult for users to provide precise material information of scatterers, which would cause deviation of power parameters. To tackle this issue, a measurement-driven power generation method is proposed. Firstly, a bandwidth-dependent clustering method is developed to group the rays into clusters. Then, the cluster power is generated by measurement-driven statistical models with a power-decomposition idea. It decomposes the power parameter into several parts that are less dependent on the scenario. Moreover, it can avoid massive measurement campaigns and is more robust when applied in unmeasured scenarios. Finally, a new channel measurement campaign in a street canyon scenario is performed for validations. The proposed method is also compared with a ray-tracing (RT) method and the 3rd Generation Partnership Project (3GPP) channel model. It is shown that the proposed framework and power generation method are great alternatives for accurate and robust modeling requirements under specific A2G communication scenarios.
- Open Access
Simultaneous A2A and A2G Channel Measurement System for UAV Communications
Air-to-air (A2A) and air-to-ground (A2G) communication links are typical link types for unmanned aerial vehicle (UAV) communication networks, where radio propagation channels are fundamental for the design and optimization of corresponding communication systems. In this paper, a UAV channel measurement system based on two unmanned aerial vehicles (UAVs) is developed, which is capable of simultaneous A2A and A2G measurements. This system adopts an integrated hardware and signal processing architecture that ensures time and frequency synchronization among multiple aerial and ground nodes. Several data postprocessing steps, including the back-to-back calibration, sliding-correlation-based channel impulse response (CIR) extraction, and constant false alarm rate (CFAR)-based multi-path extraction, are performed to achieve accurate channel data. A channel emulator is used to validate the accuracy of the developed system. Finally, the developed channel measurement system is applied to conduct field channel measurements in a campus scenario. Measured channel characteristics, including path loss (PL), shadow fading (SF), Rician K-factor, root mean square delay spread (RMS-DS), and small-scale fading (SSF) are analyzed, which reveal distinct propagation behaviors between the A2A and A2G channels. These results provide valuable experimental insights and channel measurement data for modeling UAV channels.
Open AccessSimultaneous A2A and A2G Channel Measurement System for UAV Communications
Air-to-air (A2A) and air-to-ground (A2G) communication links are typical link types for unmanned aerial vehicle (UAV) communication networks, where radio propagation channels are fundamental for the design and optimization of corresponding communication systems. In this paper, a UAV channel measurement system based on two unmanned aerial vehicles (UAVs) is developed, which is capable of simultaneous A2A and A2G measurements. This system adopts an integrated hardware and signal processing architecture that ensures time and frequency synchronization among multiple aerial and ground nodes. Several data postprocessing steps, including the back-to-back calibration, sliding-correlation-based channel impulse response (CIR) extraction, and constant false alarm rate (CFAR)-based multi-path extraction, are performed to achieve accurate channel data. A channel emulator is used to validate the accuracy of the developed system. Finally, the developed channel measurement system is applied to conduct field channel measurements in a campus scenario. Measured channel characteristics, including path loss (PL), shadow fading (SF), Rician K-factor, root mean square delay spread (RMS-DS), and small-scale fading (SSF) are analyzed, which reveal distinct propagation behaviors between the A2A and A2G channels. These results provide valuable experimental insights and channel measurement data for modeling UAV channels.
- Open Access
Cluster Characteristics Analysis of UAV Air-to-Air Channels Based on Ray Tracing and Wasserstein Generative Adversarial Network with Gradient Penalty
Air-to-air (A2A) communication plays a vital role in low-altitude unmanned aerial vehicle (UAV) networks and demands accurate channel modeling to support system analysis and design. A key challenge in A2A channel modeling lies in extracting reliable cluster characteristics, which are often limited due to the scarcity of measurement data. To overcome this limitation, a cluster characteristic analysis method is proposed for UAV A2A channels in built-up environments. First, we reconstruct virtual urban environments, followed by the acquisition of A2A channel data using ray tracing (RT) techniques. Then, a kernel power density (KPD) clustering algorithm is applied to group the multipath components (MPCs). To enhance the modeling accuracy of intra-cluster angular offsets in both elevation and azimuth domains, a Wasserstein generative adversarial network with gradient penalty (WGAN-GP) is further introduced for generative modeling. A comprehensive analysis is conducted on key cluster characteristics, including the intra-cluster number of MPCs, intra-cluster delay and angular spreads, number of clusters, and angular distributions. The numerical results demonstrate that the proposed WGAN-GP-based approach achieves superior angular fitting accuracy compared to conventional empirical distribution methods.
Open AccessCluster Characteristics Analysis of UAV Air-to-Air Channels Based on Ray Tracing and Wasserstein Generative Adversarial Network with Gradient Penalty
Air-to-air (A2A) communication plays a vital role in low-altitude unmanned aerial vehicle (UAV) networks and demands accurate channel modeling to support system analysis and design. A key challenge in A2A channel modeling lies in extracting reliable cluster characteristics, which are often limited due to the scarcity of measurement data. To overcome this limitation, a cluster characteristic analysis method is proposed for UAV A2A channels in built-up environments. First, we reconstruct virtual urban environments, followed by the acquisition of A2A channel data using ray tracing (RT) techniques. Then, a kernel power density (KPD) clustering algorithm is applied to group the multipath components (MPCs). To enhance the modeling accuracy of intra-cluster angular offsets in both elevation and azimuth domains, a Wasserstein generative adversarial network with gradient penalty (WGAN-GP) is further introduced for generative modeling. A comprehensive analysis is conducted on key cluster characteristics, including the intra-cluster number of MPCs, intra-cluster delay and angular spreads, number of clusters, and angular distributions. The numerical results demonstrate that the proposed WGAN-GP-based approach achieves superior angular fitting accuracy compared to conventional empirical distribution methods.
- 2 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (12) , 19070-19082
Field-Trained Neural Network-Based Angle-of-Arrival Estimation for Air-to-Ground Channel Measurements
Unmanned aerial vehicle (UAV) are a key platform in the sixth generation (6G) communication networks, which has the ability to significantly enhance the connectivity and communication efficiency. This paper proposes a robust and efficient angle-of-arrival (AoA) estimation method based on a field-trained neural network (NN) for air-to-ground (A2G) channel measurement applications. In this method, a real-time UAV channel sounder is utilized to obtain the complex channel impulse response (CIR). Firstly, we identify the line-of-sight (LoS) path from the complex CIR via a random forest (RF) classifier and calculate the LoS path phase as the input data set in the real-time stage. Then the NN is pre-trained quickly in the field by each receiving antenna element's LoS path phase and the corresponding AoAs according to the locations of transceivers. Finally, the pre-trained NN is used for high-efficient LoS and non-LoS (NLoS) AoA estimation in real-time. To validate the proposed method, a channel measurement campaign is carried out in a campus scenario at 3.6 GHz. The estimated results are in good agreements with the measurement data and theoretical for the LoS and NLoS cases. In addition, the proposed field-trained estimation method is more computationally efficient and more robust compared with the traditional methods. The proposed angle estimation method is also valuable for future A2G channel measurement, enabling more reliable and efficient connectivity in dynamic and complex environments.
- 2 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (12) , 19070-19082
Field-Trained Neural Network-Based Angle-of-Arrival Estimation for Air-to-Ground Channel Measurements
Unmanned aerial vehicle (UAV) are a key platform in the sixth generation (6G) communication networks, which has the ability to significantly enhance the connectivity and communication efficiency. This paper proposes a robust and efficient angle-of-arrival (AoA) estimation method based on a field-trained neural network (NN) for air-to-ground (A2G) channel measurement applications. In this method, a real-time UAV channel sounder is utilized to obtain the complex channel impulse response (CIR). Firstly, we identify the line-of-sight (LoS) path from the complex CIR via a random forest (RF) classifier and calculate the LoS path phase as the input data set in the real-time stage. Then the NN is pre-trained quickly in the field by each receiving antenna element's LoS path phase and the corresponding AoAs according to the locations of transceivers. Finally, the pre-trained NN is used for high-efficient LoS and non-LoS (NLoS) AoA estimation in real-time. To validate the proposed method, a channel measurement campaign is carried out in a campus scenario at 3.6 GHz. The estimated results are in good agreements with the measurement data and theoretical for the LoS and NLoS cases. In addition, the proposed field-trained estimation method is more computationally efficient and more robust compared with the traditional methods. The proposed angle estimation method is also valuable for future A2G channel measurement, enabling more reliable and efficient connectivity in dynamic and complex environments.
- Open Access
- 30 September 2024
- Published by OAE Publishing Inc. in Complex Engineering Systems
- Vol. 4 (3)
Path loss prediction for air-to-ground communication links via scenario transfer technology
Path loss (PL) is a significant channel parameter for the link budget in unmanned aerial vehicle-aided communications. This study introduces an innovative neural network model to estimate PL for air-to-ground communication links. Utilizing the geometric characteristics of varied physical environments, the model accurately predicts PL in diverse communication scenarios. A back-propagation neural network technique is introduced for extrapolating PL under both line-of-sight and non-line-of-sight conditions. A dataset acquisition strategy, comprising scenario reconstruction and advanced ray-tracing techniques, is employed to foster the model’s training and evaluation. Finally, the proposed model is fully trained in diverse communication scenarios, and then used to predict the PLs in a new communication scenario generated by the International Telecommunication Union standard at 28 GHz. The results demonstrate that the extrapolated PLs of the proposed model are well consistent with the reference results. As existing PL models and standard PL models aim at several specifically defined scenarios, the proposed model can predict the PLs in some undefined and unknown scenarios.
- 30 September 2024
- Published by OAE Publishing Inc. in Complex Engineering Systems
- Vol. 4 (3)
Open AccessPath loss prediction for air-to-ground communication links via scenario transfer technology
Path loss (PL) is a significant channel parameter for the link budget in unmanned aerial vehicle-aided communications. This study introduces an innovative neural network model to estimate PL for air-to-ground communication links. Utilizing the geometric characteristics of varied physical environments, the model accurately predicts PL in diverse communication scenarios. A back-propagation neural network technique is introduced for extrapolating PL under both line-of-sight and non-line-of-sight conditions. A dataset acquisition strategy, comprising scenario reconstruction and advanced ray-tracing techniques, is employed to foster the model’s training and evaluation. Finally, the proposed model is fully trained in diverse communication scenarios, and then used to predict the PLs in a new communication scenario generated by the International Telecommunication Union standard at 28 GHz. The results demonstrate that the extrapolated PLs of the proposed model are well consistent with the reference results. As existing PL models and standard PL models aim at several specifically defined scenarios, the proposed model can predict the PLs in some undefined and unknown scenarios.
- Open Access
Cross-Correlation Characteristic Measurements and Analysis for Multi-Link A2G Channels Based on a Multi-UAV System
With the rapid development of unmanned aerial vehicles (UAVs), UAV-based communications have shown promising application prospects in beyond-fifth-generation (B5G) and sixth-generation (6G) communication. Air-to-ground (A2G) channel characteristics are significant for UAV-based wireless communications. In this paper, a multi-UAV channel measurement system is developed, which can realize cooperative, accurate, and real-time channel measurements. Measurement campaigns are performed in the campus scenario at the 3.6 GHz frequency band. Based on the measurement data, cross-correlation properties of some typical large-scale channel parameters are extracted and analyzed, including the power delay profile (PDP), path loss (PL), and shadow fading (SF). The analysis results reveal that the cross-correlation of PDP remains larger than 0.6 during the whole measurement, and the decorrelation distance is 14.765 m. The cross-correlation of SF is relatively low, and the decorrelation distance is found to be 4.628 m. These results can provide valuable references for optimizing multi-link UAV communications and node placements.
Open AccessCross-Correlation Characteristic Measurements and Analysis for Multi-Link A2G Channels Based on a Multi-UAV System
With the rapid development of unmanned aerial vehicles (UAVs), UAV-based communications have shown promising application prospects in beyond-fifth-generation (B5G) and sixth-generation (6G) communication. Air-to-ground (A2G) channel characteristics are significant for UAV-based wireless communications. In this paper, a multi-UAV channel measurement system is developed, which can realize cooperative, accurate, and real-time channel measurements. Measurement campaigns are performed in the campus scenario at the 3.6 GHz frequency band. Based on the measurement data, cross-correlation properties of some typical large-scale channel parameters are extracted and analyzed, including the power delay profile (PDP), path loss (PL), and shadow fading (SF). The analysis results reveal that the cross-correlation of PDP remains larger than 0.6 during the whole measurement, and the decorrelation distance is 14.765 m. The cross-correlation of SF is relatively low, and the decorrelation distance is found to be 4.628 m. These results can provide valuable references for optimizing multi-link UAV communications and node placements.
- 9 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 25 (11) , 17066-17077
Path Loss and Shadowing for UAV-to-Ground UWB Channels Incorporating the Effects of Built-Up Areas and Airframe
A realistic channel model is vital for designing, optimizing, and evaluating unmanned aerial vehicle (UAV)-to-ground (U2G) communication systems. This paper presents a comprehensive U2G ultra-wideband (UWB) channel model by considering the large-scale fading (LSF), including path loss (PL), shadow fading (SF), and airframe shadowing (AS). The effects of carrier frequency, bandwidth, building distribution, and UAV airframe structure on the LSF are fully studied. Different from the traditional bandwidth-independent PL calculation method, an extended closed-form expression for calculating PL is proposed to capture the new characteristics of ultra-wide bandwidth. The SF part is statistically described by a parametric lognormal model, and the built-up scenario-dependent parameters are predicted by a hybrid method with the ray-tracing and virtual scenario technologies. In addition, the AS part with respect to the airframe structure and posture variation is derived. It consists of the direct and reflected path components which are obtained by the deterministic and statistical approaches, respectively. The numerical simulations show that bandwidth, building distribution, and airframe structure have great influence on the LSF characteristics. For example, the fluctuation of received power can reach 30 dB due to the AS. The proposed model also shows its effectiveness and reliability by comparing with the RT and measured data, as well as the good compatibility with standardized models for some typical scenarios.
- 9 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 25 (11) , 17066-17077
Path Loss and Shadowing for UAV-to-Ground UWB Channels Incorporating the Effects of Built-Up Areas and Airframe
A realistic channel model is vital for designing, optimizing, and evaluating unmanned aerial vehicle (UAV)-to-ground (U2G) communication systems. This paper presents a comprehensive U2G ultra-wideband (UWB) channel model by considering the large-scale fading (LSF), including path loss (PL), shadow fading (SF), and airframe shadowing (AS). The effects of carrier frequency, bandwidth, building distribution, and UAV airframe structure on the LSF are fully studied. Different from the traditional bandwidth-independent PL calculation method, an extended closed-form expression for calculating PL is proposed to capture the new characteristics of ultra-wide bandwidth. The SF part is statistically described by a parametric lognormal model, and the built-up scenario-dependent parameters are predicted by a hybrid method with the ray-tracing and virtual scenario technologies. In addition, the AS part with respect to the airframe structure and posture variation is derived. It consists of the direct and reflected path components which are obtained by the deterministic and statistical approaches, respectively. The numerical simulations show that bandwidth, building distribution, and airframe structure have great influence on the LSF characteristics. For example, the fluctuation of received power can reach 30 dB due to the AS. The proposed model also shows its effectiveness and reliability by comparing with the RT and measured data, as well as the good compatibility with standardized models for some typical scenarios.
- Open Access
Channel Knowledge Map Construction Based on a UAV-Assisted Channel Measurement System
With the fast development of unmanned aerial vehicles (UAVs), reliable UAV communication is becoming increasingly vital. The channel knowledge map (CKM) is a crucial bridge connecting the environment and the propagation channel that may visually depict channel characteristics. This paper presents a comprehensive scheme based on a UAV-assisted channel measurement system for constructing the CKM in real-world scenarios. Firstly, a three-dimensional (3D) CKM construction scheme for real-world scenarios is provided, which involves channel knowledge extraction, mapping, and completion. Secondly, an algorithm of channel knowledge extraction and completion is proposed. The sparse channel knowledge is extracted based on the sliding correlation and constant false alarm rate (CFAR) approaches. The 3D Kriging interpolation is used to complete the sparse channel knowledge. Finally, a UAV-assisted channel measurement system is developed and CKM measurement campaigns are conducted in campus and farmland scenarios. The path loss (PL) and root mean square delay spread (RMS-DS) are measured at different heights to determine CKMs. The measured and analyzed results show that the proposed construction scheme can effectively and accurately construct the CKMs in real-world scenarios.
Open AccessChannel Knowledge Map Construction Based on a UAV-Assisted Channel Measurement System
With the fast development of unmanned aerial vehicles (UAVs), reliable UAV communication is becoming increasingly vital. The channel knowledge map (CKM) is a crucial bridge connecting the environment and the propagation channel that may visually depict channel characteristics. This paper presents a comprehensive scheme based on a UAV-assisted channel measurement system for constructing the CKM in real-world scenarios. Firstly, a three-dimensional (3D) CKM construction scheme for real-world scenarios is provided, which involves channel knowledge extraction, mapping, and completion. Secondly, an algorithm of channel knowledge extraction and completion is proposed. The sparse channel knowledge is extracted based on the sliding correlation and constant false alarm rate (CFAR) approaches. The 3D Kriging interpolation is used to complete the sparse channel knowledge. Finally, a UAV-assisted channel measurement system is developed and CKM measurement campaigns are conducted in campus and farmland scenarios. The path loss (PL) and root mean square delay spread (RMS-DS) are measured at different heights to determine CKMs. The measured and analyzed results show that the proposed construction scheme can effectively and accurately construct the CKMs in real-world scenarios.