Peter Wizinowich
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Peter Wizinowich has a total of 462 co-authors. Here are the top co-authors by number of shared publications:
Charlotte Z. Bond
UK Astronomy Technology Centre, Royal Observatory, Edinburgh, United Kingdom
18 shared publications- Dimitri Mawet
California Institute of Technology
17 shared publications - Jacques-Robert Delorme
Department of Astronomy, California Institute of Technology, Pasadena, CA 91125, USA
15 shared publications - Nemanja Jovanovic
California Institute of Technology
15 shared publications - Garreth Ruane
California Institute of Technology
14 shared publications - Jean-Baptiste Ruffio
University of California, San Diego
14 shared publications
Latest Publications
- Open Access
- 22 July 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (15) , 28323
Uplink phase estimation for optical ground-to-GEO links using a Rayleigh laser guide star as a ground layer discriminator
Ground-to-GEO optical feeder links pre-compensated by adaptive optics are fundamentally limited by phase angular anisoplanatism, which induces large residual tip–tilt errors and deep signal fades on the satellite. Recent work showed that downlink intensity provides vertical turbulence discrimination and improves tip–tilt estimation at the point ahead angle. We extend this concept by incorporating a Rayleigh laser guide star (R-LGS) as a ground-layer-dominated measurement, enabling separation of ground and upper-layer contributions within a minimum mean square error estimation framework that accounts for focal anisoplanatism and measurement noise. Using measured urban turbulence profiles, we show that uplink phase estimation based on R-LGS measurements provides strong tip–tilt improvement and reduces deep fades by up to 24 dB. The gains are especially notable under strong turbulence and high angular decorrelation, demonstrating the practical value of low-cost R-LGS for robust GEO feeder-link operation.
- 22 July 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (15) , 28323
Open AccessUplink phase estimation for optical ground-to-GEO links using a Rayleigh laser guide star as a ground layer discriminator
Ground-to-GEO optical feeder links pre-compensated by adaptive optics are fundamentally limited by phase angular anisoplanatism, which induces large residual tip–tilt errors and deep signal fades on the satellite. Recent work showed that downlink intensity provides vertical turbulence discrimination and improves tip–tilt estimation at the point ahead angle. We extend this concept by incorporating a Rayleigh laser guide star (R-LGS) as a ground-layer-dominated measurement, enabling separation of ground and upper-layer contributions within a minimum mean square error estimation framework that accounts for focal anisoplanatism and measurement noise. Using measured urban turbulence profiles, we show that uplink phase estimation based on R-LGS measurements provides strong tip–tilt improvement and reduces deep fades by up to 24 dB. The gains are especially notable under strong turbulence and high angular decorrelation, demonstrating the practical value of low-cost R-LGS for robust GEO feeder-link operation.
- 1 July 2025
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 11 (03) , 035004-13
Fringing analysis and forward modeling of Keck Planet Imager and Characterizer (KPIC) spectra
Keck Planet Imager and Characterizer (KPIC) combines high-contrast imaging with high-resolution spectroscopy (R∼35,000 in K band) to study directly imaged exoplanets and brown dwarfs in unprecedented detail. KPIC aims to spectrally characterize substellar companions through measurements of planetary radial velocities, spins, and atmospheric composition. The dominant source of systematic noise for KPIC was fringing or oscillations in the spectrum as a function of wavelength. The fringing signal could dominate residuals by up to 10% of the continuum for high S/N exposures, preventing accurate wavelength calibration, retrieval of atmospheric parameters, and detection of planets with flux ratios less than 1% of the host star. To combat contamination from fringing, we identified its three unique sources and adopted a physically informed model of Fabry–Pérot cavities to apply to post-processed data. We find that this strategy can effectively model fringing in observations of A0V/F0V stars, reducing the residual systematics caused by fringing by a factor of 2. Beyond modeling the fringing signal, we wedged two of the transmissive optics internal to KPIC to eliminate two of the three sources of fringing and confirmed the third source as the entrance window to the spectrograph NIRSPEC. When applied to new data taken with the wedged optics, our previous model of the Fabry–Pérot cavity reduced the amplitude of the residuals by a factor of 10.
- 1 July 2025
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 11 (03) , 035004-13
Fringing analysis and forward modeling of Keck Planet Imager and Characterizer (KPIC) spectra
Keck Planet Imager and Characterizer (KPIC) combines high-contrast imaging with high-resolution spectroscopy (R∼35,000 in K band) to study directly imaged exoplanets and brown dwarfs in unprecedented detail. KPIC aims to spectrally characterize substellar companions through measurements of planetary radial velocities, spins, and atmospheric composition. The dominant source of systematic noise for KPIC was fringing or oscillations in the spectrum as a function of wavelength. The fringing signal could dominate residuals by up to 10% of the continuum for high S/N exposures, preventing accurate wavelength calibration, retrieval of atmospheric parameters, and detection of planets with flux ratios less than 1% of the host star. To combat contamination from fringing, we identified its three unique sources and adopted a physically informed model of Fabry–Pérot cavities to apply to post-processed data. We find that this strategy can effectively model fringing in observations of A0V/F0V stars, reducing the residual systematics caused by fringing by a factor of 2. Beyond modeling the fringing signal, we wedged two of the transmissive optics internal to KPIC to eliminate two of the three sources of fringing and confirmed the third source as the entrance window to the spectrograph NIRSPEC. When applied to new data taken with the wedged optics, our previous model of the Fabry–Pérot cavity reduced the amplitude of the residuals by a factor of 10.
- Open Access
- 20 May 2025
- Published by American Astronomical Society in The Astronomical Journal
- Vol. 169 (6) , 319
OGLE-2016-BLG-1195Lb: A Sub-Neptune Beyond the Snow Line of an M-dwarf Confirmed by Keck Adaptive Optics
We present the analysis of high-resolution follow-up observations of OGLE-2016-BLG-1195 using Laser Guide Star Adaptive Optics with Keck, seven years after the event’s peak. We resolve the lens, measuring its flux and the relative source-lens proper motion, thus finding the system to be a M p = 10.08 ± 1.18M ⊕ planet orbiting an M-dwarf, M L = 0.62 ± 0.05M ⊙, beyond the snow line, with a projected separation of r ⊥ = 2.24 ± 0.21 au at D L = 7.45 ± 0.55 kpc. Our results are consistent with the discovery paper, which reports values with 1σ uncertainties based on a single mass–distance constraint from finite source effects. However, both the discovery paper and our follow-up results disagree with the analysis of a different group that also present the planetary signal detection. The latter utilizes Spitzer photometry to measure a parallax signal claiming the system is an Earth-mass planet orbiting an ultracool dwarf. Their parallax signal though is improbable since it suggests a lens star in the disk moving perpendicular to or counter to the Galactic disk rotation. Moreover, microlensing parallaxes can be impacted by systematic errors in the photometry. Therefore, we reanalyze the Spitzer photometry using a pixel level decorrelation model to detrend detector systematics. We find that we cannot confidently recover the same detrended light curve that is likely dominated by systematic errors in the photometric data. The results of this paper act as a cautionary tale that a careful understanding of detector systematics and how they influence astrophysical constraints is crucial.
- 20 May 2025
- Published by American Astronomical Society in The Astronomical Journal
- Vol. 169 (6) , 319
Open AccessOGLE-2016-BLG-1195Lb: A Sub-Neptune Beyond the Snow Line of an M-dwarf Confirmed by Keck Adaptive Optics
We present the analysis of high-resolution follow-up observations of OGLE-2016-BLG-1195 using Laser Guide Star Adaptive Optics with Keck, seven years after the event’s peak. We resolve the lens, measuring its flux and the relative source-lens proper motion, thus finding the system to be a M p = 10.08 ± 1.18M ⊕ planet orbiting an M-dwarf, M L = 0.62 ± 0.05M ⊙, beyond the snow line, with a projected separation of r ⊥ = 2.24 ± 0.21 au at D L = 7.45 ± 0.55 kpc. Our results are consistent with the discovery paper, which reports values with 1σ uncertainties based on a single mass–distance constraint from finite source effects. However, both the discovery paper and our follow-up results disagree with the analysis of a different group that also present the planetary signal detection. The latter utilizes Spitzer photometry to measure a parallax signal claiming the system is an Earth-mass planet orbiting an ultracool dwarf. Their parallax signal though is improbable since it suggests a lens star in the disk moving perpendicular to or counter to the Galactic disk rotation. Moreover, microlensing parallaxes can be impacted by systematic errors in the photometry. Therefore, we reanalyze the Spitzer photometry using a pixel level decorrelation model to detrend detector systematics. We find that we cannot confidently recover the same detrended light curve that is likely dominated by systematic errors in the photometric data. The results of this paper act as a cautionary tale that a careful understanding of detector systematics and how they influence astrophysical constraints is crucial.
- 1 January 2025
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 11 (01) , 014004-23
ORCAS Keck instrument demonstrator
The Orbiting Configurable Artificial Star (ORCAS) mission in collaboration with the W. M. Keck Observatory has designed, assembled, built, and delivered, within 180 days, ORCAS Keck Instrument Demonstrator (ORKID) (ORCAS Keck Instrument Demonstrator), an early visible-wavelength performance demonstration with the Keck II Adaptive Optics (AO) system. The optical performance of ORKID meets the technical requirements derived from the scientific goals of having a Nyquist-sampled point spread function at 650 nm. This is achieved by diffraction-limited as-built performance with a root mean square internal wavefront error below 50 nm, which is key for the advancement of the ORCAS mission. ORKID has acquired, with a closed AO loop, no frame selection, while shifting and adding, the sharpest-ever on-sky image captured at Keck II. With a full width at half maximum of ∼15 mas, this is the equivalent of a 9-m diffraction-limited telescope. By doing so, the immense potential and viability of the proposed Hybrid Observatory ORCAS mission are demonstrated.
- 1 January 2025
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 11 (01) , 014004-23
ORCAS Keck instrument demonstrator
The Orbiting Configurable Artificial Star (ORCAS) mission in collaboration with the W. M. Keck Observatory has designed, assembled, built, and delivered, within 180 days, ORCAS Keck Instrument Demonstrator (ORKID) (ORCAS Keck Instrument Demonstrator), an early visible-wavelength performance demonstration with the Keck II Adaptive Optics (AO) system. The optical performance of ORKID meets the technical requirements derived from the scientific goals of having a Nyquist-sampled point spread function at 650 nm. This is achieved by diffraction-limited as-built performance with a root mean square internal wavefront error below 50 nm, which is key for the advancement of the ORCAS mission. ORKID has acquired, with a closed AO loop, no frame selection, while shifting and adding, the sharpest-ever on-sky image captured at Keck II. With a full width at half maximum of ∼15 mas, this is the equivalent of a 9-m diffraction-limited telescope. By doing so, the immense potential and viability of the proposed Hybrid Observatory ORCAS mission are demonstrated.
- Open Access
- 1 January 2025
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 11 (01) , 015005-28
Technical description and performance of the phase II version of the Keck Planet Imager and Characterizer
The Keck Planet Imager and Characterizer (KPIC) is an instrument designed to enable high spectral resolution characterization of directly imaged exoplanets and brown dwarfs in the near-infrared.1 It combines high-contrast imaging (HCI) with high-resolution spectroscopy (HRS).2,3 This combination of techniques was first proposed by Ref. 4 and later refined by Refs. 5 and 6. This approach relies on a high-contrast imaging system to first spatially isolate the planet’s light and suppress the starlight. Then, a high-resolution spectrometer is used to differentiate the signals between the two components based on differences in properties such as composition and radial velocity. KPIC, which is deployed at the Keck Observatory, was the first dedicated instrument optimized for this observational technique. The facility adaptive optics (AO) system first corrects for the atmosphere, and then, light from the directly imageable companion is injected into a single-mode fiber (SMF) and routed to NIRSPEC,7 – 9 a high-resolution spectrometer (, where is the wavelength and is the resolution). In this way, KPIC is an interface between Keck AO and NIRSPEC to enable HCI + HRS. The SMFs not only provide a convenient way to transport the light to the spectrometer but more importantly, they act as a spatial filter, helping to minimize stellar leakage as proposed by Ref. 3.- 1 January 2025
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 11 (01) , 015005-28
Open AccessTechnical description and performance of the phase II version of the Keck Planet Imager and Characterizer
The Keck Planet Imager and Characterizer (KPIC) is an instrument designed to enable high spectral resolution characterization of directly imaged exoplanets and brown dwarfs in the near-infrared.1 It combines high-contrast imaging (HCI) with high-resolution spectroscopy (HRS).2,3 This combination of techniques was first proposed by Ref. 4 and later refined by Refs. 5 and 6. This approach relies on a high-contrast imaging system to first spatially isolate the planet’s light and suppress the starlight. Then, a high-resolution spectrometer is used to differentiate the signals between the two components based on differences in properties such as composition and radial velocity. KPIC, which is deployed at the Keck Observatory, was the first dedicated instrument optimized for this observational technique. The facility adaptive optics (AO) system first corrects for the atmosphere, and then, light from the directly imageable companion is injected into a single-mode fiber (SMF) and routed to NIRSPEC,7 – 9 a high-resolution spectrometer (, where is the wavelength and is the resolution). In this way, KPIC is an interface between Keck AO and NIRSPEC to enable HCI + HRS. The SMFs not only provide a convenient way to transport the light to the spectrometer but more importantly, they act as a spatial filter, helping to minimize stellar leakage as proposed by Ref. 3. - Open Access
- 25 September 2024
- Published by American Astronomical Society in The Astronomical Journal
- Vol. 168 (4) , 175
RV Measurements of Directly Imaged Brown Dwarf GQ Lup B to Search for Exosatellites
GQ Lup B is one of the few substellar companions with a detected cicumplanetary disk (CPD). Observations of the CPD suggest the presence of a cavity, possibly formed by an exosatellite. Using the Keck Planet Imager and Characterizer (KPIC), a high-contrast imaging suite that feeds a high-resolution spectrograph (1.9–2.5 µm, R∼35,000), we present the first dedicated radial velocity (RV) observations around a high-contrast, directly imaged substellar companion, GQ Lup B, to search for exosatellites. Over 11 epochs, we find a best and median RV error of 400–1000 m s−1, most likely limited by systematic fringing in the spectra due to transmissive optics within KPIC. With this RV precision, KPIC is sensitive to exomoons 0.6%–2.8% the mass of GQ Lup B (∼30 M Jup) at separations between the Roche limit and 65 R Jup, or the extent of the cavity inferred within the CPD detected around GQ Lup B. Using simulations of HISPEC, a high resolution infrared spectrograph planned to debut at W.M. Keck Observatory in 2026, we estimate future exomoon sensitivity to increase by over an order of magnitude, providing sensitivity to less massive satellites potentially formed within the CPD itself. Additionally, we run simulations to estimate the amount of material that different masses of satellites could clear in a CPD to create the observed cavity. We find satellite-to-planet mass ratios of q > 2 × 10−4 can create observable cavities and report a maximum cavity size of ∼51 R Jup carved from a satellite.
- 25 September 2024
- Published by American Astronomical Society in The Astronomical Journal
- Vol. 168 (4) , 175
Open AccessRV Measurements of Directly Imaged Brown Dwarf GQ Lup B to Search for Exosatellites
GQ Lup B is one of the few substellar companions with a detected cicumplanetary disk (CPD). Observations of the CPD suggest the presence of a cavity, possibly formed by an exosatellite. Using the Keck Planet Imager and Characterizer (KPIC), a high-contrast imaging suite that feeds a high-resolution spectrograph (1.9–2.5 µm, R∼35,000), we present the first dedicated radial velocity (RV) observations around a high-contrast, directly imaged substellar companion, GQ Lup B, to search for exosatellites. Over 11 epochs, we find a best and median RV error of 400–1000 m s−1, most likely limited by systematic fringing in the spectra due to transmissive optics within KPIC. With this RV precision, KPIC is sensitive to exomoons 0.6%–2.8% the mass of GQ Lup B (∼30 M Jup) at separations between the Roche limit and 65 R Jup, or the extent of the cavity inferred within the CPD detected around GQ Lup B. Using simulations of HISPEC, a high resolution infrared spectrograph planned to debut at W.M. Keck Observatory in 2026, we estimate future exomoon sensitivity to increase by over an order of magnitude, providing sensitivity to less massive satellites potentially formed within the CPD itself. Additionally, we run simulations to estimate the amount of material that different masses of satellites could clear in a CPD to create the observed cavity. We find satellite-to-planet mass ratios of q > 2 × 10−4 can create observable cavities and report a maximum cavity size of ∼51 R Jup carved from a satellite.
- Open Access
- 1 August 2024
- Published by American Astronomical Society in The Astronomical Journal
- Vol. 168 (2) , 78
A Survey of Protoplanetary Disks Using the Keck/NIRC2 Vortex Coronagraph
Recent Atacama Large Millimeter/submillimeter Array (ALMA) observations of protoplanetary disks in the millimeter continuum have shown a variety of radial gaps, cavities, and spiral features. These substructures may be signposts for ongoing planet formation, and therefore these systems are promising targets for direct imaging planet searches in the near-infrared. To this end, we present results from a deep imaging survey in the L ′ band (3.8 μm) with the Keck/NIRC2 vortex coronagraph to search for young planets in 43 disks with resolved features in the millimeter continuum or evidence for gaps/central cavities from their spectral energy distributions. Although we do not detect any new point sources, using the vortex coronagraph allows for high sensitivity to faint sources at small angular separations (down to ∼0.″1), allowing us to place strong upper limits on the masses of potential gas giant planets. We compare our mass sensitivities to the masses of planets derived using ALMA observations, and while we are sensitive to ∼1 M Jup planets in the gaps in some of our systems, we are generally not sensitive to planets of the masses expected from the ALMA observations. In addition to placing upper limits on the masses of gas giant planets that could be interacting with the dust in the disks to form the observed millimeter substructures, we are also able to map the micron-sized dust as seen in scattered light for 8 of these systems. Our large sample of systems also allows us to investigate limits on planetary accretion rates and disk viscosities.
- 1 August 2024
- Published by American Astronomical Society in The Astronomical Journal
- Vol. 168 (2) , 78
Open AccessA Survey of Protoplanetary Disks Using the Keck/NIRC2 Vortex Coronagraph
Recent Atacama Large Millimeter/submillimeter Array (ALMA) observations of protoplanetary disks in the millimeter continuum have shown a variety of radial gaps, cavities, and spiral features. These substructures may be signposts for ongoing planet formation, and therefore these systems are promising targets for direct imaging planet searches in the near-infrared. To this end, we present results from a deep imaging survey in the L ′ band (3.8 μm) with the Keck/NIRC2 vortex coronagraph to search for young planets in 43 disks with resolved features in the millimeter continuum or evidence for gaps/central cavities from their spectral energy distributions. Although we do not detect any new point sources, using the vortex coronagraph allows for high sensitivity to faint sources at small angular separations (down to ∼0.″1), allowing us to place strong upper limits on the masses of potential gas giant planets. We compare our mass sensitivities to the masses of planets derived using ALMA observations, and while we are sensitive to ∼1 M Jup planets in the gaps in some of our systems, we are generally not sensitive to planets of the masses expected from the ALMA observations. In addition to placing upper limits on the masses of gas giant planets that could be interacting with the dust in the disks to form the observed millimeter substructures, we are also able to map the micron-sized dust as seen in scattered light for 8 of these systems. Our large sample of systems also allows us to investigate limits on planetary accretion rates and disk viscosities.
- Open Access
- 30 May 2024
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 967 (2) , 171
Keck Primary Mirror Closed-loop Segment Control Using a Vector-Zernike Wavefront Sensor
We present the first on-sky segmented primary mirror closed-loop piston control using a Zernike wavefront sensor (ZWFS) installed on the Keck II telescope. Segment cophasing errors are a primary contributor to contrast limits on Keck and will be necessary to correct for the next generation of space missions and ground-based extremely large telescopes, which will all have segmented primary mirrors. The goal of the ZWFS installed on Keck is to monitor and correct primary mirror cophasing errors in parallel with science observations. The ZWFS is ideal for measuring phase discontinuities such as segment cophasing errors and is one of the most sensitive WFSs, but has limited dynamic range. The vector-ZWFS at Keck works on the adaptive-optics-corrected wavefront and consists of a metasurface focal plane mask that imposes two different phase shifts on the core of the point-spread function to two orthogonal light polarizations, producing two pupil images. This design extends the dynamic range compared with the scalar ZWFS. The primary mirror segment pistons were controlled in closed loop using the ZWFS, improving the Strehl ratio on the NIRC2 science camera by up to 10 percentage points. We analyze the performance of the closed-loop tests, the impact on NIRC2 science data, and discuss the ZWFS measurements.
- 30 May 2024
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 967 (2) , 171
Open AccessKeck Primary Mirror Closed-loop Segment Control Using a Vector-Zernike Wavefront Sensor
We present the first on-sky segmented primary mirror closed-loop piston control using a Zernike wavefront sensor (ZWFS) installed on the Keck II telescope. Segment cophasing errors are a primary contributor to contrast limits on Keck and will be necessary to correct for the next generation of space missions and ground-based extremely large telescopes, which will all have segmented primary mirrors. The goal of the ZWFS installed on Keck is to monitor and correct primary mirror cophasing errors in parallel with science observations. The ZWFS is ideal for measuring phase discontinuities such as segment cophasing errors and is one of the most sensitive WFSs, but has limited dynamic range. The vector-ZWFS at Keck works on the adaptive-optics-corrected wavefront and consists of a metasurface focal plane mask that imposes two different phase shifts on the core of the point-spread function to two orthogonal light polarizations, producing two pupil images. This design extends the dynamic range compared with the scalar ZWFS. The primary mirror segment pistons were controlled in closed loop using the ZWFS, improving the Strehl ratio on the NIRC2 science camera by up to 10 percentage points. We analyze the performance of the closed-loop tests, the impact on NIRC2 science data, and discuss the ZWFS measurements.
- Open Access
Keck Primary Mirror Closed-Loop Segment Control using a Vector-Zernike Wavefront Sensor
We present the first on-sky segmented primary mirror closed-loop piston control using a Zernike wavefront sensor (ZWFS) installed on the Keck II telescope. Segment co-phasing errors are a primary contributor to contrast limits on Keck and will be necessary to correct for the next generation of space missions and ground-based extremely large telescopes (ELTs), which will all have segmented primary mirrors. The goal of the ZWFS installed on Keck is to monitor and correct primary mirror co-phasing errors in parallel with science observations. The ZWFS is ideal for measuring phase discontinuities such as segment co-phasing errors and is one of the most sensitive WFS, but has limited dynamic range. The vector-ZWFS at Keck works on the adaptive optics (AO) corrected wavefront and consists of a metasurface focal plane mask which imposes two different phase shifts on the core of the point spread function (PSF) to two orthogonal light polarizations, producing two pupil images. This design extends the dynamic range compared with the scalar ZWFS. The primary mirror segment pistons were controlled in closed-loop using the ZWFS, improving the Strehl ratio on the NIRC2 science camera by up to 10 percentage points. We analyze the performance of the closed-loop tests, the impact on NIRC2 science data, and discuss the ZWFS measurements.
Open AccessKeck Primary Mirror Closed-Loop Segment Control using a Vector-Zernike Wavefront Sensor
We present the first on-sky segmented primary mirror closed-loop piston control using a Zernike wavefront sensor (ZWFS) installed on the Keck II telescope. Segment co-phasing errors are a primary contributor to contrast limits on Keck and will be necessary to correct for the next generation of space missions and ground-based extremely large telescopes (ELTs), which will all have segmented primary mirrors. The goal of the ZWFS installed on Keck is to monitor and correct primary mirror co-phasing errors in parallel with science observations. The ZWFS is ideal for measuring phase discontinuities such as segment co-phasing errors and is one of the most sensitive WFS, but has limited dynamic range. The vector-ZWFS at Keck works on the adaptive optics (AO) corrected wavefront and consists of a metasurface focal plane mask which imposes two different phase shifts on the core of the point spread function (PSF) to two orthogonal light polarizations, producing two pupil images. This design extends the dynamic range compared with the scalar ZWFS. The primary mirror segment pistons were controlled in closed-loop using the ZWFS, improving the Strehl ratio on the NIRC2 science camera by up to 10 percentage points. We analyze the performance of the closed-loop tests, the impact on NIRC2 science data, and discuss the ZWFS measurements.
- Open Access
- 27 June 2023
- Published by American Astronomical Society in The Astronomical Journal
- Vol. 166 (1) , 31
Keck Planet Imager and Characterizer Emission Spectroscopy of WASP-33b
We present Keck Planet Imager and Characterizer (KPIC) high-resolution (R ∼35,000) K-band thermal emission spectroscopy of the ultrahot Jupiter WASP-33b. The use of KPIC’s single-mode fibers greatly improves both blaze and line-spread stabilities relative to slit spectrographs, enhancing the cross-correlation detection strength. We retrieve the dayside emission spectrum with a nested-sampling pipeline, which fits for orbital parameters, the atmospheric pressure–temperature profile, and the molecular abundances. We strongly detect the thermally inverted dayside and measure mass-mixing ratios for CO ( logCO MMR = − 1.1 − 0.6 + 0.4 ), H2O ( logH 2 O MMR = − 4.1 − 0.9 + 0.7 ), and OH ( logOH MMR = − 2.1 − 1.1 + 0.5 ), suggesting near-complete dayside photodissociation of H2O. The retrieved abundances suggest a carbon- and possibly metal-enriched atmosphere, with a gas-phase C/O ratio of 0.8 − 0.2 + 0.1 , consistent with the accretion of high-metallicity gas near the CO2 snow line and post-disk migration or with accretion between the soot and H2O snow lines. We also find tentative evidence for 12CO/13CO ∼ 50, consistent with values expected in protoplanetary disks, as well as tentative evidence for a metal-enriched atmosphere (2–15 × solar). These observations demonstrate KPIC’s ability to characterize close-in planets and the utility of KPIC’s improved instrumental stability for cross-correlation techniques.
- 27 June 2023
- Published by American Astronomical Society in The Astronomical Journal
- Vol. 166 (1) , 31
Open AccessKeck Planet Imager and Characterizer Emission Spectroscopy of WASP-33b
We present Keck Planet Imager and Characterizer (KPIC) high-resolution (R ∼35,000) K-band thermal emission spectroscopy of the ultrahot Jupiter WASP-33b. The use of KPIC’s single-mode fibers greatly improves both blaze and line-spread stabilities relative to slit spectrographs, enhancing the cross-correlation detection strength. We retrieve the dayside emission spectrum with a nested-sampling pipeline, which fits for orbital parameters, the atmospheric pressure–temperature profile, and the molecular abundances. We strongly detect the thermally inverted dayside and measure mass-mixing ratios for CO ( logCO MMR = − 1.1 − 0.6 + 0.4 ), H2O ( logH 2 O MMR = − 4.1 − 0.9 + 0.7 ), and OH ( logOH MMR = − 2.1 − 1.1 + 0.5 ), suggesting near-complete dayside photodissociation of H2O. The retrieved abundances suggest a carbon- and possibly metal-enriched atmosphere, with a gas-phase C/O ratio of 0.8 − 0.2 + 0.1 , consistent with the accretion of high-metallicity gas near the CO2 snow line and post-disk migration or with accretion between the soot and H2O snow lines. We also find tentative evidence for 12CO/13CO ∼ 50, consistent with values expected in protoplanetary disks, as well as tentative evidence for a metal-enriched atmosphere (2–15 × solar). These observations demonstrate KPIC’s ability to characterize close-in planets and the utility of KPIC’s improved instrumental stability for cross-correlation techniques.