ATAbhilash Tirupathi

Abhilash Tirupathi

*This is an algorithmically generated author record based on publicly available information.

Abhilash Tirupathi has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • DC/AC Power Converters for Hybrid Renewable Energy-Based Applications

    by T. Abhilash, Kuncham Sateesh Kumar, Jammy Ramesh Rahul, A. Kirubakaran, V. T. Somasekhar

    In DC-AC power conversion, multilevel inverters (MLIs) are getting more attention in the medium range of voltage and power applications such as flexible alternating current transmission systems (FACTS), high voltage direct current (HVDC) transmission systems, high power machine drives, and renewable energy sources. Improved spectral performance, reduced electromagnetic interference (EMI) with neighboring circuits, lower blocking voltage on the devices, and reduced size of the filter are some of the advantages of MLIs. With these motivating factors, contemporary research is focused on synthesizing hybrid topologies for power converters with a fewer number of power devices and higher efficiency. Present day industries employ high-power, medium voltage equipment (at mega-watt level with 2.3–6.9 kV). In order to cope up with these requirements, a new family of multilevel converters has emerged which combines MLIs and hybrid topologies. This chapter primarily focuses on the derivation of hybrid multilevel inverter (HMLI) topologies for medium voltage applications. A comprehensive review on HMLI topologies have be presented based on the component count, voltage stress, merits and demerits. Further different recently proposed HMLI topologies and its significances have been addressed with simulation results. Finally concluding comments and future directions of research on HMLI topologies are presented.

  • Open Access

    Analysis and simulation of even-level quasi-Z-source inverter

    by Niltala Sai Shanmukha Akshath, Avugaddi Naresh, Matcha Nikesh Kumar, Mayur Barman, Durgesh Nandan, Tirupathi Abhilash

    This research proposes a seven-level inverter with quasi-Z-source boost converters. The proposed topology employs a packed U-cell asymmetrical type multilevel inverter along with front-end quasi-Z-source networks. The quasi networks provide high gain compared to a conventional boost converter. This topology is the most suitable for photovoltaic multi-string applications. The proposed topology has the potential to supply both the alternating current (AC) and direct current (DC) type load. The inverter structure has a lower number of active switches which helps in the reduction of losses and improvement in efficiency. In this paper, the operation principle of a quasi-network and inverter circuit are explained in detail. In addition, the simulation results for various modulation indices are presented. In the MATLAB/Simulink environment, the architecture is proposed by using gated sinusoidal “Pulse width modulation”.


  • Open Access

    A cascaded converter using hybrid cells and H-bridge structure

    by Satya Subrahmanya Ajay Dangeti, Chaitanya Kishore Patnaik Sekharamantry, Venkata Kowshik Bayanti, B. A. Raju Ch, Kvs Ramachandra Murthy, Abhilash Tirupathi

    This paper introduces a cascaded converter structure using hybrid two-level cells to form a single-phase seven-level inverter. Compared to various conventional and existing multilevel (MLI) topologies, this topology requires a lower number of devices. It uses several DC sources integrated in two-stage cells to provide the required voltage. In this topology, the DC-link condensers are not necessary. The modes of operation and modulation of the structure proposed are described in depth. Finally, in the MATLAB/Simulink platform the new topology is evaluated and the results reported.


  • Open Access

    A single-phase simplified DC-AC converter using DC-link capacitors and an H-bridge

    by Sai Divya Sindhura Nunna, Akhilesh Ketha, Srivastav Sai Goud Padamat, K. Rambabu, Ujwala Anil Kshirsagar, Abhilash Tirupathi

    This paper introduces a simplified inverter circuit using a single dc source and an H-bridge with a least possible number of “switching devices”. This topology does not employ multiple “dc sources”, which enhances the reliability of the configuration. The topology consists of two parts, namely: “Level generation parts” as well as “Polarity generation parts”, it is the mixture of some of the switching devices, DC-link capacitor and a single DC source completes the part of level generation. The H-bridge in the proposed structure produces the polarity generation part. A detailed explanation of the modulation system and operating modes of the proposed framework are discussed. Finally, in the MATLAB/SIMULINK platform, the projected network topology is simulated and the outcomes are presented.


  • A Seven-Level VSI With a Front-End Cascaded Three-Level Inverter and Flying-Capacitor-Fed H-Bridge

    by Tirupathi Abhilash, Kirubakaran Annamalai, Somasekhar Veeramraju Tirumala

    Multi-Level Inverters (MLIs) are playing a pivotal role in the power sector with potential applications such as interfacing renewable energy sources with the grid and several industrial drive applications. MLIs with a smaller number of switching devices are more promising due to their compact size, reduced cost and higher efficiency compared to their traditional counterparts. This paper, therefore, presents a new three-phase seven-level inverter. This topology is a combination of two cascade-connected two-level Voltage Source Inverters (VSIs) and H-bridge cells with flying capacitors (FCs). This paper presents the operating principle and the balancing technique for the DC-link capacitors and FCs. The generation of various output voltage levels and the limitation of the Sinusoidal Pulse Width Modulation (SPWM) control for FC voltage balancing is also presented. The number of components in the proposed circuit configuration and their voltage ratings are considerably lower compared to the recently proposed topologies. The behavior of the proposed circuit configuration is first assessed with simulation studies and is then tested with a laboratory prototype. The simulation and experimental results validate the effectiveness of the proposed topology and the voltage balancing technique.


  • A new hybrid flying capacitor–based single‐phase nine‐level inverter

    by Abhilash Tirupathi, Kirubakaran Annamalai, Somasekhar Veeramraju Tirumala

    Multilevel inverters (MLIs) with reduced part count are becoming popular in the arena of medium voltage and medium power applications. This proposed topology owns the advantages of reduced number and voltage stress across the switching devices and higher efficiency. It also combines the method of utilizing full DC-link voltage to improve the RMS output voltage. The proposed hybrid topology is constructed using three different sections consisting of a cascaded two two-level inverter, H-bridge with a flying capacitor, and single-leg low-frequency circuit. The complete modes of operation to generate 9-level A. C voltage at the inverter output including the FC voltage balancing has been comprehensively presented. A comparison is constructed with the proposed and recent topologies in the literature to show the merits of the proposed configuration. The proposed topology is tested in MATLAB/SIMULINK environment and a scale-down prototype has been developed in the laboratory. The feasibility of the proposed topology is verified through simulation and experimental results.