Anastasiia D. Stotckaia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Anastasiia D. Stotckaia has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
Anton V. Putov
Saint-Petersburg electrotechnical university LETI, Russia
4 shared publicationsKonstantin V. Ignatiev
Automatic Control Systems Department, Saint-Petersburg electrotechnical university LETI, Russia
4 shared publicationsVictor V. Putov
Saint-Petersburg electrotechnical university LETI, Russia
4 shared publications- Nikita A. Dobroskok
Department of Automatic Control Systems (ACS), Saint Petersburg Electrotechnical University “LETI”, 197022 St. Petersburg, Russia
3 shared publications - Ruslan M. Migranov
Department of Automatic Control Systems (ACS), Saint Petersburg Electrotechnical University “LETI”, 197022 St. Petersburg, Russia
3 shared publications V. V. Putov
3 shared publications
Latest Publications
- Open Access
- 1 December 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 16 (4) , 2342-2352
Approach to self-synchronization of a group of static power converters
This study examines the control and synchronization of an orderly connected network of three-phase bidirectional power converters, serving as the grid interface for an energy storage system. The primary objective is to ensure stable operation under single-phase and non-symmetrical three-phase grid conditions. The control employs independent phase voltage regulation for compatibility. To achieve seamless coordination of an unlimited group of converters, the paper proposes a synchronization method based on a modified Kuramoto model. This method is designed to be compatible with independent phase control during asymmetric grid states. The proposed approach utilizes a structured connection graph, defined by phase shift magnitude, to synchronize the converter group. A brief overview of the tools for synchronizing oscillator groups is provided. A computer model was developed to study the operating modes of this converter class under both symmetrical and asymmetrical loads. Simulation studies confirmed the viability of the synchronization method. Furthermore, the research results were successfully applied in the design and implementation of a physical 10 kW grid - connected uninterruptible power supply prototype, demonstrating practical feasibility.
- 1 December 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 16 (4) , 2342-2352
Open AccessApproach to self-synchronization of a group of static power converters
This study examines the control and synchronization of an orderly connected network of three-phase bidirectional power converters, serving as the grid interface for an energy storage system. The primary objective is to ensure stable operation under single-phase and non-symmetrical three-phase grid conditions. The control employs independent phase voltage regulation for compatibility. To achieve seamless coordination of an unlimited group of converters, the paper proposes a synchronization method based on a modified Kuramoto model. This method is designed to be compatible with independent phase control during asymmetric grid states. The proposed approach utilizes a structured connection graph, defined by phase shift magnitude, to synchronize the converter group. A brief overview of the tools for synchronizing oscillator groups is provided. A computer model was developed to study the operating modes of this converter class under both symmetrical and asymmetrical loads. Simulation studies confirmed the viability of the synchronization method. Furthermore, the research results were successfully applied in the design and implementation of a physical 10 kW grid - connected uninterruptible power supply prototype, demonstrating practical feasibility.
- Open Access
- 1 June 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (2) , 1091-1104
Investigation of bidirectional three-phase four-leg converter with LCL filter
A three-phase four-leg bidirectional power converter used as an input stage of an energy storage system using the inductance (L), capacitance (C), and inductance (L) or LCL filter on the grid side is considered. The article provides a variant of the three-phase four-leg bidirectional converter control system implementation based on 3D space vector pulse-width modulation and per-phase voltage control. A brief analysis of the applied control algorithms of the three-phase four-leg bidirectional converter in inverter and rectifier modes is given. A computer model has been built to investigate the operating modes of the converters of the designated class with both balanced and unbalanced load. Studies were carried out by computer modeling methods in order to optimize the parameters of the LCL filter on the grid side with bidirectional energy exchange. Optimal LCL filter parameters and modulation frequencies are determined for the developed converter, providing acceptable quality indicators when operating in bidirectional mode.
- 1 June 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 15 (2) , 1091-1104
Open AccessInvestigation of bidirectional three-phase four-leg converter with LCL filter
A three-phase four-leg bidirectional power converter used as an input stage of an energy storage system using the inductance (L), capacitance (C), and inductance (L) or LCL filter on the grid side is considered. The article provides a variant of the three-phase four-leg bidirectional converter control system implementation based on 3D space vector pulse-width modulation and per-phase voltage control. A brief analysis of the applied control algorithms of the three-phase four-leg bidirectional converter in inverter and rectifier modes is given. A computer model has been built to investigate the operating modes of the converters of the designated class with both balanced and unbalanced load. Studies were carried out by computer modeling methods in order to optimize the parameters of the LCL filter on the grid side with bidirectional energy exchange. Optimal LCL filter parameters and modulation frequencies are determined for the developed converter, providing acceptable quality indicators when operating in bidirectional mode.
- Open Access
- 1 March 2023
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 14 (1) , 185-198
Neural network based detecting induction motor defects supplied by unbalanced grid
Predictive diagnosis of motor defects can reduce repair and downtime costs of electrical equipment. This paper presents the results of a research on the effectiveness of the defect classification and recognition system based on convolutional neural network to detect defects in a squirrel-cage induction motor based on the stator supply voltage and output phase currents when supplied from an industrial grid of limited power with possible voltage asymmetry and harmonic distortion taken into account. In this work a simulation model, implemented in MATLAB/Simulink, is proposed to investigate unbalanced conditions. The mathematical model has been verified on a physical test bench and then used to create a database of currents from measured asymmetric grid voltages in the presence of defects such as short circuit between turns of one phase, rotor bar breakage, rotor eccentricity and bearing defects. The classification quality of all defects in the neural network was 72%, with the exclusion of intercoil short circuit defect and the merging of different bearing defects, the quality of the model was achieved 91%. A further increase in the quality of the defect recognition system is due to a building up modification of the neural network architecture.
- 1 March 2023
- Published by Institute of Advanced Engineering and Science in International Journal of Power Electronics and Drive Systems (IJPEDS)
- Vol. 14 (1) , 185-198
Open AccessNeural network based detecting induction motor defects supplied by unbalanced grid
Predictive diagnosis of motor defects can reduce repair and downtime costs of electrical equipment. This paper presents the results of a research on the effectiveness of the defect classification and recognition system based on convolutional neural network to detect defects in a squirrel-cage induction motor based on the stator supply voltage and output phase currents when supplied from an industrial grid of limited power with possible voltage asymmetry and harmonic distortion taken into account. In this work a simulation model, implemented in MATLAB/Simulink, is proposed to investigate unbalanced conditions. The mathematical model has been verified on a physical test bench and then used to create a database of currents from measured asymmetric grid voltages in the presence of defects such as short circuit between turns of one phase, rotor bar breakage, rotor eccentricity and bearing defects. The classification quality of all defects in the neural network was 72%, with the exclusion of intercoil short circuit defect and the merging of different bearing defects, the quality of the model was achieved 91%. A further increase in the quality of the defect recognition system is due to a building up modification of the neural network architecture.
- 1 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 937-940
Principles of SCADA-system development
The paper deals with principles of control software design. Such a software tools are widely used in modern paper production enterprise. Siemens SIMATIC Step-7 environment is implemented for software development (SCADA system (Supervisory Control And Data Acquisition)). Basic concept of program operation could be described as follows: control signal is generated by using real-time sensors' data. Example of creation operator panel interface with the overview its structure, are also included. This HMI (human-machine interface) contains schemes of production processes and helps operator to respond to untypical changes in manufacturing.
- 1 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 937-940
Principles of SCADA-system development
The paper deals with principles of control software design. Such a software tools are widely used in modern paper production enterprise. Siemens SIMATIC Step-7 environment is implemented for software development (SCADA system (Supervisory Control And Data Acquisition)). Basic concept of program operation could be described as follows: control signal is generated by using real-time sensors' data. Example of creation operator panel interface with the overview its structure, are also included. This HMI (human-machine interface) contains schemes of production processes and helps operator to respond to untypical changes in manufacturing.
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 382-385
Self-tuning parameter fuzzy PID controller for autonomous differential drive mobile robot
The purpose of this study is to utilize the capabilities of a fuzzy PID controller for electric drives for a differential drive autonomous mobile robot trajectory application. The robot is powered by two non-identical electric motors. A self-tuning-parameter fuzzy PID controller is designed to control the rotation speed of the motors independently in order to achieve a straight trajectory of the motion despite the motor differences. Simulation of the robot drive system is carried out in a Matlab/Simulink environment. Simulations were used to evaluate performance of the fuzzy self-tuning parameter PID controllers in the time domain. Conclusions are drawn concerning the performance of the controller. Furthermore, expected challenges for the future development are discussed.
- 1 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 382-385
Self-tuning parameter fuzzy PID controller for autonomous differential drive mobile robot
The purpose of this study is to utilize the capabilities of a fuzzy PID controller for electric drives for a differential drive autonomous mobile robot trajectory application. The robot is powered by two non-identical electric motors. A self-tuning-parameter fuzzy PID controller is designed to control the rotation speed of the motors independently in order to achieve a straight trajectory of the motion despite the motor differences. Simulation of the robot drive system is carried out in a Matlab/Simulink environment. Simulations were used to evaluate performance of the fuzzy self-tuning parameter PID controllers in the time domain. Conclusions are drawn concerning the performance of the controller. Furthermore, expected challenges for the future development are discussed.
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1798, 020125
Electromechanical imitator of antilock braking modes of wheels with pneumatic tire and its application for the runways friction coefficient measurement
- 1 January 2017
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1798, 020125
Electromechanical imitator of antilock braking modes of wheels with pneumatic tire and its application for the runways friction coefficient measurement
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 03, 154-159
The method and technical facilities for measurement of airfield friction coefficient and it's correlation with the characteristics of aircraft braking during landing
The paper deals with the development of the method and means of friction coefficient measurement of runway coatings under extreme weather conditions. The correlation of measurement results with the braking characteristics of the landing aircraft is discussed. The paper also deals with the conceptual model of a towed measuring complex, implementing a new runway friction coefficient measurement technology. Automatic adaptive braking control system is offered to improve the accuracy of reproduction of electromechanical braking measuring wheel device with antilock braking mode. Computer models of friction coefficient measurement processes are built. Depending of friction coefficient measurements results with simulated anti-lock braking mode is breathy discussed. Design documentation is developed and experimental model of new towing measurement system is made. Experimental model tests on the basis of automated electromechanical test bench with the “treadmill” controlled drum simulator are carried out.
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 03, 154-159
The method and technical facilities for measurement of airfield friction coefficient and it's correlation with the characteristics of aircraft braking during landing
The paper deals with the development of the method and means of friction coefficient measurement of runway coatings under extreme weather conditions. The correlation of measurement results with the braking characteristics of the landing aircraft is discussed. The paper also deals with the conceptual model of a towed measuring complex, implementing a new runway friction coefficient measurement technology. Automatic adaptive braking control system is offered to improve the accuracy of reproduction of electromechanical braking measuring wheel device with antilock braking mode. Computer models of friction coefficient measurement processes are built. Depending of friction coefficient measurements results with simulated anti-lock braking mode is breathy discussed. Design documentation is developed and experimental model of new towing measurement system is made. Experimental model tests on the basis of automated electromechanical test bench with the “treadmill” controlled drum simulator are carried out.
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 03, 1
The method and technical facilities for measurement of airfield friction coefficient and it's correlation with the characteristics of aircraft braking during landing
The paper deals with the development of the method and means of friction coefficient measurement of runway coatings under extreme weather conditions. The correlation of measurement results with the braking characteristics of the landing aircraft is discussed. The paper also deals with the conceptual model of a towed measuring complex, implementing a new runway friction coefficient measurement technology. Automatic adaptive braking control system is offered to improve the accuracy of reproduction of electromechanical braking measuring wheel device with antilock braking mode. Computer models of friction coefficient measurement processes are built. Depending of friction coefficient measurements results with simulated antilock braking mode is breathy discussed. Design documentation is developed and experimental model of new towing measurement system is made. Experimental model tests on the basis of automated electromechanical test bench with the “treadmill” controlled drum simulator are carried out.
- 1 October 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 03, 1
The method and technical facilities for measurement of airfield friction coefficient and it's correlation with the characteristics of aircraft braking during landing
The paper deals with the development of the method and means of friction coefficient measurement of runway coatings under extreme weather conditions. The correlation of measurement results with the braking characteristics of the landing aircraft is discussed. The paper also deals with the conceptual model of a towed measuring complex, implementing a new runway friction coefficient measurement technology. Automatic adaptive braking control system is offered to improve the accuracy of reproduction of electromechanical braking measuring wheel device with antilock braking mode. Computer models of friction coefficient measurement processes are built. Depending of friction coefficient measurements results with simulated antilock braking mode is breathy discussed. Design documentation is developed and experimental model of new towing measurement system is made. Experimental model tests on the basis of automated electromechanical test bench with the “treadmill” controlled drum simulator are carried out.
- Open Access
- 1 September 2016
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 75, 09003
The Functionally Similar to Adaptive Nonlinear Algorithm for Control of Dynamic Plant with Limited Uncertainty
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry
- 1 September 2016
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 75, 09003
Open AccessThe Functionally Similar to Adaptive Nonlinear Algorithm for Control of Dynamic Plant with Limited Uncertainty
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 176-178
The measurement method of runway frictional properties correlated with the braking performance of aircraft
In this paper an airstrip friction coefficient measuring method developing for extreme weather conditions and correlation between the measured results and braking characteristics of real aircrafts are presented. The conceptual model of towed friction coefficient tester that realizes brand new friction coefficient measuring method based upon the controllable measuring wheel braking for imitation of anti-lock braking modes that are close to the real braking modes of the aircrafts while landing. The computer models of friction coefficient measuring procedure was designed and series of tests was carried out on correlation of the friction coefficient measuring results imitating the anti-lock braking system modes on the measuring wheel varying the shape, intensity and frequency of braking cycles and slipping values and anti-lock braking modes.
- 1 May 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 176-178
The measurement method of runway frictional properties correlated with the braking performance of aircraft
In this paper an airstrip friction coefficient measuring method developing for extreme weather conditions and correlation between the measured results and braking characteristics of real aircrafts are presented. The conceptual model of towed friction coefficient tester that realizes brand new friction coefficient measuring method based upon the controllable measuring wheel braking for imitation of anti-lock braking modes that are close to the real braking modes of the aircrafts while landing. The computer models of friction coefficient measuring procedure was designed and series of tests was carried out on correlation of the friction coefficient measuring results imitating the anti-lock braking system modes on the measuring wheel varying the shape, intensity and frequency of braking cycles and slipping values and anti-lock braking modes.