EGElizabeth Anne Gibson

Elizabeth Anne Gibson

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Elizabeth Anne Gibson has a total of 236 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Morphological Modulation and Performance Tuning of Perylene-Porphyrin-Based Covalent Organic Frameworks

    by Kathryn McCarthy, Roberto González-Gómez, Owen Woodford, Elizabeth A. Gibson, Fabio Cucinotta, Pau Farràs

    Large-scale production of covalent organic frameworks (COFs) has been hindered due to their poor reproducibility. Precisely controlling the growth of COFs can be achieved via alterations to synthesis parameters. A strategy for synthesizing reproducible perylene-porphyrin-based COFs over a range of temperatures is presented, with the aim to evaluate their morphology and functionality. Morphological modifications from nanospheres to nanofibers were observed at higher synthesis temperatures, which enhanced chemisorption in methylene blue removal experiments. Photoluminescence and transient absorption spectroscopy measurements showed efficient light absorption over the visible region and ultrafast excited-state deactivation, representative of a potential equilibrium with a charge-separated state, indicating the valuable photophysical behavior of our COFs.

  • Open Access

    Amide-linked hole transporting material for solid-state dye-sensitised solar cells

    by Amy Neild, Owen Woodford, Pablo Docampo, Elizabeth A. Gibson

    Our study introduces TPABT as a new amide-based hole transport mediator that delivers a marked improvement in device efficiency from 0.04% to 2.26% through prolonged air oxidation and light soaking.

  • Open Access

    Finite Element Optimization of 3D Abiotic Glucose Fuel Cells for Implantable Medical Devices

    by Cong Ma, Elizabeth Gibson, Mirella Di Lorenzo, Patrick Degenaar

    As the world’s population ages, the incidence of chronic disorders is on the rise. Active Implantable Medical Devices are, therefore, evolving to meet the challenge. As the size of these devices decreases to facilitate implantation, the challenge of providing stable, continuous power becomes significant. Lithium batteries provide reliable, stable power to implants; however, their miniaturization leads to a reduction in the stored energy capacity, total lifespan, and overall capability. Consequently, there is a need for on-body energy harvesting alternatives. This study utilizes literature data on abiotic glucose fuel cells to feed into a finite element model incorporating both diffusion and reaction aspects to investigate how the 3D macro-architecture of the fuel cell device can be used to optimize the energy output. Accordingly, optimal 3D architectures are determined to enable power outputs ranging from several tens of microwatts to one hundred microwatts from an implantable package. This will help with the 3D architecture design of future similar abiotic fuel cell units and speed up the process of figuring out the best settings for key parameters (like shape, size, and separation).


  • Open Access

    Unveiling photoinduced electron transfers in photosensitized polyoxometalates for solar energy conversion

    by Christian Cariño, Anna Proust, Geoffroy Guillemot, Ludivine K/Bidi, Sébastien Blanchard, Elizabeth A. Gibson, Guillaume Izzet

    Owing to their electron reservoir abilities, polyoxometalates are promising for artificial photosynthesis. Unlocking their potential hinges on mastering photoinduced electron transfer kinetics for efficient solar fuel production.


  • Open Access

    Optimising the Design of Implantable Fuel Cells

    by Cong Ma, Elizabeth Gibson, Mirella Di Lorenzo, Patrick Degenaar

    As the world's population ages, the incidence of chronic disorders is on the rise. Active Implantable Medical Devices are therefore evolving to meet the challenge. As the size of these devices decreases to facilitate implantation, the challenge of providing stable, continuous power becomes significant. Lithium batteries provide reliable, stable power to implants, however, their miniaturization leads to a reduction in the stored energy capacity, total lifespan and overall capability. Consequently, there is need for on-body energy harvesting alternatives. This study utilizes literature data on abiotic glucose fuel cells to feed into a Finite Element model incorporating both diffusion and reaction aspects to investigate how the 3D macro architecture of the fuel cell device can be used to optimize the energy output. Accordingly, optimal 3D architectures are determined to enable power outputs ranging from several tens to one hundred microwatts from an implantable package.. This will help with the 3D architecture design of future similar abiotic fuel cell units and speed up the process of figuring out the best settings for key parameters (like shape, size, and separation).

  • Open Access

    The role of MAPbI 3 hydrate in triple mesoscopic stack minimodules: the key to elongating outdoor lifespan

    by Susana Iglesias-Porras, Amy Neild, Johannes Gausden, Mathew Barraclough, Elizabeth A. Gibson

    Outdoor-tested TMS minimodules exhibit reversible, humidity-induced V OC gains linked to hydrate formation. Real-time V OC monitoring enables predictive maintenance, boosting long-term durability alongside advanced encapsulation strategies.


  • Open Access

    Temperature-guided solidification of copper coordination complexes as hole transport materials

    by Timo Keller, Iacopo Benesperi, Jakob Thyr, Tomas Edvinsson, Elizabeth A. Gibson, Marina Freitag

    We report a rapid and controllable solid-state formation process of copper coordination complex hole-transport materials (HTMs) in dye-sensitized solar cells (DSCs), reducing processing times from over 48 h to 20 min. By thermally-induced phase transition of Cu(I/II)(tmby)2-based liquid electrolytes from 50 °C to 110 °C, we demonstrated that a 70 °C post-treatment for 20 min is ideal for creating an amorphous HTM with minimal crystallization. Time-dependent Raman spectra confirmed near-complete solvent removal within 20 min, while scanning electron microscopy highlighted a compact, defect-minimized HTM morphology when 4-tert-butylpyridine was employed versus N-methylbenzimidazole. Transient absorption spectroscopy revealed ultrafast dye regeneration (t1/2,reg = 487 ns) and near-unity regeneration efficiency (99.2%) for short heat treatments, whereas extended treatments (e.g., 60 min) led to μs-scale recombination (26.8 μs) and lower performance. Electrochemical impedance spectroscopy indicated stable charge-transfer resistances at the TiO2/HTM interface (from 25.6 Ω in liquid state to 27.5 Ω in solid state), confirming efficient hole transport pathways. Under 1 sun illumination, devices retained up to ≈10% power conversion efficiency, while indoor (1000 lux) conditions yielded photocurrents up to 79 μA cm−2 and peak efficiencies of 16%. These findings establish a robust, reproducible route to form Cu-based HTMs in solid-state DSCs with enhanced low-light performance and highlight key design parameters controlling morphology, interfacial charge transfer, and photovoltaic yield.


  • Open Access

    Use of Recovered Carbon Black from Waste Tires in Triple Mesoscopic Stack Perovskite Solar Cells

    by Susana Iglesias-Porras, Amy Neild, Lee Stevens, Wei Li, Colin Snape, Owen Woodford, Niall Straughan, Elizabeth A. Gibson

    This research addresses critical challenges in the photovoltaic (PV) industry to achieve net-zero greenhouse gas emissions by 2050, amidst geopolitical semiconductor supply risks and escalating volumes of PV waste. We demonstrate the opportunity to address these challenges through the design of PV cells which are compatible with a circular economy. In this proof-of-concept study, unpurified locally sourced recovered carbon black (rCB) from waste tires was integrated into the mesoporous carbon layer of triple mesoscopic perovskite solar cells as a sustainable alternative to virgin carbon sources, and comparable efficiencies (9.98%) to commercial carbon paste benchmarks (10.4%) were attained. Key findings reveal that the presence of sulfur, silica, and zinc oxide contaminants only affected performance and durability marginally. While sulfur enhanced perovskite crystallization, as evidenced by an increased fill factor, it potentially influenced the absorber's valence band maximum, slightly dropping the open-circuit voltage. Silica and zinc oxide exacerbated moisture ingress under UK weather conditions, as revealed by outdoor testing, which accelerated degradation post-breaching of the encapsulant. Such degradation could be mitigated through effective encapsulation. Although further research is crucial to maximize performance and device longevity, the feasibility of using locally sourced rCB in PV technology has been demonstrated. This approach could support regional energy resilience and sustainability objectives within a circular economy framework.


  • Open Access

    Interfacing CuO, CuBi 2 O 4 , and protective metal oxide layers to boost solar-driven photoelectrochemical hydrogen evolution

    by Cathal Burns, Owen Woodford, Susanna L. Stephens, Muhammed Rishan, Linsey Fuller, Shafeer Kalathil, Elizabeth A. Gibson

    This article reports the development of CuO|CuBi 2 O 4 photocathodes stabilized by protective layers of TiO 2 , MgO, or NiO, with Pt or MoS 2 nanoparticles serving as co-catalysts to facilitate H 2 evolution.


  • Open Access

    Investigating the effect of hydrothermal carbonisation reaction times on the photoluminescence of bio-oil-derived carbon polymer dots

    by Lawrence A. Bruce, Liam Desmond, Abigail A. Seddon, Leon Bowen, Greg A. Mutch, Anh N. Phan, Elizabeth A. Gibson

    Carbon polymer dots (CPDs) have favourable properties such as broad spectral absorption, strong photoluminescence, low toxicity, and high specific surface area.