Morteza Dardel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Morteza Dardel has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
Mohammad Hadi Pashaei
10 shared publicationsHamidreza Mohammadi Daniali
Department of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran
8 shared publicationsMohammad Hassan Ghasemi
Babol Noshirvani University of Technology
5 shared publicationsAlireza Fathi
Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Razavi Khorasan, Iran
4 shared publications- Alireza Fathi
Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
3 shared publications Masoumeh Safartoobi
Department of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran
3 shared publications
Latest Publications
- 10 July 2026
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 14 (6) , 411
Frequency and Stability Analysis of Fluid Conveying Rotating Multistep Drilling Bit
- 10 July 2026
- Published by Springer Nature in Journal of Vibration Engineering & Technologies
- Vol. 14 (6) , 411
Frequency and Stability Analysis of Fluid Conveying Rotating Multistep Drilling Bit
- 20 November 2025
- Published by Springer Nature in Acta Mechanica
- Vol. 237 (4) , 1739-1765
The aeroelastic characteristics of delaminated multilayer triangular composite plate under hypersonic flow
- 20 November 2025
- Published by Springer Nature in Acta Mechanica
- Vol. 237 (4) , 1739-1765
The aeroelastic characteristics of delaminated multilayer triangular composite plate under hypersonic flow
- 5 September 2025
- Published by Elsevier in Thin-Walled Structures
- Vol. 218
Nonlinear stability and vibration analysis of fluid-conveying nanochannel scroll shells using an adaptive neuro-fuzzy inference system
- 5 September 2025
- Published by Elsevier in Thin-Walled Structures
- Vol. 218
Nonlinear stability and vibration analysis of fluid-conveying nanochannel scroll shells using an adaptive neuro-fuzzy inference system
- 23 December 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems
Dynamic behavior and stability analysis of fluid-conveying nano-spiral shells: Modeling, simulation, and parametric study
This paper presents a study on a fluid-conveying nano-spiral shell’s free vibration and stability analysis. The nano-spiral shell with Archimedean cross-section shape is modeled according to the first-order shear deformation (FSDT) and modified coupled stress (MCST) theories. Van der Waals force is modeled based on the Leonard Jones potential for atomic interactions. The fluid-structure interaction equation is derived based on the assumption of slip boundary conditions for the fluid. The Rayleigh-Ritz method is used to obtain the natural frequencies of a macro-size spiral shell to be validated with the finite element method (FEM). The parametric vibration analysis is performed for a nano-spiral shell conveying fluid. The results show that the natural frequencies decrease as the distance between the layers of the nano-spiral shell increases. Additionally, an increase in length results in a decrease in natural frequencies. Stability analysis is conducted, and flutter and divergence bifurcations are accurately studied. The results show that the shell with clamped boundary conditions is more stable than the supported boundary condition due to its higher bending stiffness. As the distance between the layers of the fluid-conveying nano-spiral shell increases, instability occurs at a lower fluid velocity. Conversely, as the thickness of the shell increases, the nanostructure becomes unstable at higher fluid velocities.
- 23 December 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems
Dynamic behavior and stability analysis of fluid-conveying nano-spiral shells: Modeling, simulation, and parametric study
This paper presents a study on a fluid-conveying nano-spiral shell’s free vibration and stability analysis. The nano-spiral shell with Archimedean cross-section shape is modeled according to the first-order shear deformation (FSDT) and modified coupled stress (MCST) theories. Van der Waals force is modeled based on the Leonard Jones potential for atomic interactions. The fluid-structure interaction equation is derived based on the assumption of slip boundary conditions for the fluid. The Rayleigh-Ritz method is used to obtain the natural frequencies of a macro-size spiral shell to be validated with the finite element method (FEM). The parametric vibration analysis is performed for a nano-spiral shell conveying fluid. The results show that the natural frequencies decrease as the distance between the layers of the nano-spiral shell increases. Additionally, an increase in length results in a decrease in natural frequencies. Stability analysis is conducted, and flutter and divergence bifurcations are accurately studied. The results show that the shell with clamped boundary conditions is more stable than the supported boundary condition due to its higher bending stiffness. As the distance between the layers of the fluid-conveying nano-spiral shell increases, instability occurs at a lower fluid velocity. Conversely, as the thickness of the shell increases, the nanostructure becomes unstable at higher fluid velocities.
- 15 November 2024
- Published by Elsevier in Journal of Energy Storage
- Vol. 104
Mathematical modeling and artificial neural network analysis of nano-scroll capacitors for energy storage
- 15 November 2024
- Published by Elsevier in Journal of Energy Storage
- Vol. 104
Mathematical modeling and artificial neural network analysis of nano-scroll capacitors for energy storage
- 26 July 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 238 (20) , 9960-9996
Clearance control of mechanism with sliding mode controller
Due to the design, manufacturing, and assembly processes, joint clearance inevitably occurs in mechanisms. To reduce the undesirable effects of this phenomenon, in this work a practical control method to decrease these effects is presented. This control method ensures permanent joint contact and follows the desired path based on the actuators in the system. As a result, because the controller seeks to achieve two control demands using one actuator, these mechanisms are known as an under-actuated system. For this purpose, an improved second-order sliding-mode controller (IS-SMC) is proposed. This choice is based on its robustness and its ability to meet control demands in a finite time, as well as its high accuracy for sub-excitation systems. In this research, the control method is applied to the crank-slider and the four-bar mechanisms. For this purpose, at first, the equations of these mechanisms have been expressed in an ideal form, and then the nonlinear equations have been extracted with the imperfect joint. The Lankarani-Nikravesh and the Ambrosio models have been used for modeling the clearance and friction force in the joint, respectively. In addition, verification of controller is implemented in Adams software.
- 26 July 2024
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 238 (20) , 9960-9996
Clearance control of mechanism with sliding mode controller
Due to the design, manufacturing, and assembly processes, joint clearance inevitably occurs in mechanisms. To reduce the undesirable effects of this phenomenon, in this work a practical control method to decrease these effects is presented. This control method ensures permanent joint contact and follows the desired path based on the actuators in the system. As a result, because the controller seeks to achieve two control demands using one actuator, these mechanisms are known as an under-actuated system. For this purpose, an improved second-order sliding-mode controller (IS-SMC) is proposed. This choice is based on its robustness and its ability to meet control demands in a finite time, as well as its high accuracy for sub-excitation systems. In this research, the control method is applied to the crank-slider and the four-bar mechanisms. For this purpose, at first, the equations of these mechanisms have been expressed in an ideal form, and then the nonlinear equations have been extracted with the imperfect joint. The Lankarani-Nikravesh and the Ambrosio models have been used for modeling the clearance and friction force in the joint, respectively. In addition, verification of controller is implemented in Adams software.
- 24 July 2024
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 35 (13) , 1071-1100
Thermo-aeroelastic analysis of triangular composite plate with embedded shape memory alloy at supersonic flow
This work investigates the effectiveness of a shape-memory alloy (SMA) in controlling the instabilities of triangular composite plates under supersonic flow. Lagoudas’ quadratic polynomial hardening theory models the SMA effect. First-order piston theory was used for the aerodynamic modeling, and the reference-temperature method was used for modeling the thermal heating. The buckling and post-buckling behaviors were studied for different boundary conditions with four different layups. In addition, buckling and post-buckling of the composite plate, with and without shape memory alloy wire, has been studied. The effect of SMA wire on aeroelastic instabilities is accurately studied. The embedded SMA wire significantly increased the stability region (postpone divergence and flutter velocities) and buckling temperature. Also, the time responses of the triangular composite plate are determined at different Mach numbers, showing that by increasing the Mach number, the SMA wire can control or decrease the vibration amplitudes.
- 24 July 2024
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 35 (13) , 1071-1100
Thermo-aeroelastic analysis of triangular composite plate with embedded shape memory alloy at supersonic flow
This work investigates the effectiveness of a shape-memory alloy (SMA) in controlling the instabilities of triangular composite plates under supersonic flow. Lagoudas’ quadratic polynomial hardening theory models the SMA effect. First-order piston theory was used for the aerodynamic modeling, and the reference-temperature method was used for modeling the thermal heating. The buckling and post-buckling behaviors were studied for different boundary conditions with four different layups. In addition, buckling and post-buckling of the composite plate, with and without shape memory alloy wire, has been studied. The effect of SMA wire on aeroelastic instabilities is accurately studied. The embedded SMA wire significantly increased the stability region (postpone divergence and flutter velocities) and buckling temperature. Also, the time responses of the triangular composite plate are determined at different Mach numbers, showing that by increasing the Mach number, the SMA wire can control or decrease the vibration amplitudes.
- 8 February 2024
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 24 (22)
Nonlinear Vibration of Truncated Open Conical Nanoshells Under Harmonic Excitation
The nonlinear forced vibration behavior of truncated open conical nanoshells is investigated in this paper. Nonlocal elasticity theory has been employed to modify the size-dependent effect of micro/nanostructure. Von Karman nonlinear strains are used to consider the geometric nonlinearity of the nanoshells. Using Hamilton’s principle, the equations of motion and boundary conditions of truncated open conical nanoshells are derived. Galerkin method is used to solve the governing equations. Then, to determine the nonlinear forced vibration behavior of truncated open conical nanoshells, complex averaging and arc-length continuation methods are employed. Finally, the effect of nonlocal parameters, cone apex angle, the amplitude of harmonic excitation, structural damping coefficient, and geometrical parameters on the nonlinear frequency response of the truncated open conical nanoshells are discussed.
- 8 February 2024
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 24 (22)
Nonlinear Vibration of Truncated Open Conical Nanoshells Under Harmonic Excitation
The nonlinear forced vibration behavior of truncated open conical nanoshells is investigated in this paper. Nonlocal elasticity theory has been employed to modify the size-dependent effect of micro/nanostructure. Von Karman nonlinear strains are used to consider the geometric nonlinearity of the nanoshells. Using Hamilton’s principle, the equations of motion and boundary conditions of truncated open conical nanoshells are derived. Galerkin method is used to solve the governing equations. Then, to determine the nonlinear forced vibration behavior of truncated open conical nanoshells, complex averaging and arc-length continuation methods are employed. Finally, the effect of nonlocal parameters, cone apex angle, the amplitude of harmonic excitation, structural damping coefficient, and geometrical parameters on the nonlinear frequency response of the truncated open conical nanoshells are discussed.
- 27 October 2023
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 32 (12) , 125001
Mathematical modelling and experimental study of a novel planar micro-positioning stage using shape memory alloy actuators
The application of smart materials as actuators in precise positioning systems has witnessed significant growth in recent years. However, the use of shape memory alloy (SMA) materials in this context is hindered by their slow response and complex nonlinear behaviour. To overcome these limitations, this paper introduces a novel approach that incorporates two opposite SMA actuators into a flexure hinge type micro-positioning stage, aiming to enhance the system speed. A semi-analytical modelling approach is employed to model the nonlinear behaviour of the SMA actuator. Using the available material models for SMA materials and the nonlinear curved beam theory, the governing equations of the proposed SMA actuator are derived and the resulted partial differential equations are reduced to an algebraic equation based on the Galerkin method. The resulting equations are then solved using the return map method. To validate the accuracy and effectiveness of the proposed model, an experimental setup is constructed. The experimental results demonstrate the model ability to accurately predict the behaviour of the system. Additionally, the developed model allows for the extraction of stress and strain profiles of the SMA actuators for designing the actuator. The study highlights the potential of integrating the proposed model with robust control methods for future works, aiming to effectively control micro-positioning systems and further enhance their performance.
- 27 October 2023
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 32 (12) , 125001
Mathematical modelling and experimental study of a novel planar micro-positioning stage using shape memory alloy actuators
The application of smart materials as actuators in precise positioning systems has witnessed significant growth in recent years. However, the use of shape memory alloy (SMA) materials in this context is hindered by their slow response and complex nonlinear behaviour. To overcome these limitations, this paper introduces a novel approach that incorporates two opposite SMA actuators into a flexure hinge type micro-positioning stage, aiming to enhance the system speed. A semi-analytical modelling approach is employed to model the nonlinear behaviour of the SMA actuator. Using the available material models for SMA materials and the nonlinear curved beam theory, the governing equations of the proposed SMA actuator are derived and the resulted partial differential equations are reduced to an algebraic equation based on the Galerkin method. The resulting equations are then solved using the return map method. To validate the accuracy and effectiveness of the proposed model, an experimental setup is constructed. The experimental results demonstrate the model ability to accurately predict the behaviour of the system. Additionally, the developed model allows for the extraction of stress and strain profiles of the SMA actuators for designing the actuator. The study highlights the potential of integrating the proposed model with robust control methods for future works, aiming to effectively control micro-positioning systems and further enhance their performance.