BXBinggang Xiao

Binggang Xiao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Binggang Xiao has a total of 144 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Quad‐Band Terahertz Electromagnetically Induced Transparency‐Like Metasurface Sensor With Geometry‐Constrained Inversion

    by Binggang Xiao, Luqi Liu, Wangyang Qiu, Jiabin Yu, Lihua Xiao, Hongmei Mi

    This study proposes a quad‐band terahertz electromagnetically induced transparency (EIT)‐like metasurface sensor with geometry‐constrained parameter inversion. The device consists of three concentric ring resonators and a bottom U‐shaped resonator. A gap in the inner ring breaks symmetry, while cooperative bright–dark and dark–dark mode coupling produces four transparency windows at 0.49, 0.59, 0.76, and 0.86 THz. Refractive‐index sensing simulations yield a maximum sensitivity of 269.8 GHz/RIU (RIU, refractive index unit) and a maximum Q factor of 66.4. Further experiments with antibiotic samples are required to validate practical detection performance. An improved multiscale temporal convolutional network (Improved‐TCN) captures multiscale local features and cross‐band correlations in the multimode‐coupled spectra. By integrating multiscale dilated convolutions and self‐attention, it predicts a geometrically feasible candidate set of five parameters from 201‐point linear transmission amplitude spectra. Across five independent runs, the full model achieves a standardized mean squared error (MSE) of 0.028 ± 0.001 and a coefficient of determination (R 2 ) of 0.969 ± 0.003, demonstrating stable performance on the held‐out test set. The method provides a practical reference for rapid, geometrically feasible parameter inversion of multiband terahertz sensors with predefined topologies.

  • Thermally reconfigurable full-space terahertz polarization-converting metasurface with physics-constrained forward prediction and attention-based inverse design

    by Binggang Xiao, Zhonghua Wei, Zhitao Zhu, Hongmei Mi, Jiabin Yu

    Reconfigurable terahertz polarization control is of growing importance for sixth-generation (6G) wireless communications, imaging, and sensing, yet simultaneously achieving broadband full-space operation, compact device architectures, and efficient design workflows remains a significant challenge. Here, we propose a thermally reconfigurable full-space terahertz polarization-converting metasurface composed of a 45°-rotated wrench-shaped gold resonator, a SiO 2 spacer, and an Au–VO 2 hybrid bottom grating. By thermally reconfiguring the bottom boundary via the VO 2 phase transition, the same compact platform switches between transmission-mode and reflection-mode polarization conversion without altering the unit-cell topology. The metasurface delivers a transmission polarization-conversion ratio above 90% from 0.30 to 6.66 THz and above 99% from 0.75 to 5.69 THz when VO 2 is in the insulating state, while maintaining a reflection polarization-conversion ratio above 90% from 2.44 to 4.56 THz when VO 2 becomes metallic. To accelerate electromagnetic modeling while ensuring physical interpretability and enabling on-demand design, we further develop a physics-constrained forward predictor, PhysiLSTM-Net, and an attention-enhanced inverse model, BiCAM-Net. By incorporating the polarization-conversion ratio into the loss function, PhysiLSTM-Net achieves an R 2 of 0.9802 with a mean-squared error (MSE) of 0.0051, whereas BiCAM-Net attains a mean R 2 of 0.951 across the target structural parameters and an RMSE of 0.269 in structural-parameter inversion. Together, the proposed device and learning framework establish a practical pathway toward broadband full-space terahertz polarization control and physics-guided intelligent metasurface design.

  • High Sensitivity Metamaterial Sensor Based on Electromagnetically Induced Transparency Effect for the Detection of Chlortetracycline Hydrochloride

    by Binggang Xiao, Wangyang Qiu, Zhenyang Ma, Jianyuan Qin, Lihua Xiao

    In this paper, we propose a high‐sensitivity metallic EIT‐like terahertz metamaterial sensor for antibiotic detection, featuring a split‐ring resonator coupled with a rectangular resonator. Numerical refractive‐index simulations yield a sensitivity of 259 GHz/RIU. Based on the simulated EIT transparency peak, the corresponding quality factor ( Q ) is 7.6 and the figure of merit (FOM) is approximately 2.57. Its transparency window is strategically centered near 0.76 THz, corresponding to a reported characteristic absorption frequency of chlortetracycline, to enhance the interaction between the target analyte and the EIT‐like resonance. Through systematic fabrication and characterization, we employed laser direct writing technology to manufacture the EIT‐like terahertz sensor and evaluated its performance using terahertz frequency‐domain spectroscopy. For quantitative chlortetracycline hydrochloride detection, we prepared concentration gradients in both aqueous and milk matrices. Within the tested concentration range, experimentally distinguishable spectral responses were observed down to 0.1 mg/L in aqueous solution and 1 mg/L in the milk matrix. Detailed analysis of the transmission spectra revealed distinct concentration‐dependent spectral responses in both media, advancing the application of metamaterial sensors in biochemical detection and food safety monitoring. The observed concentration‐dependent spectral responses in aqueous and milk matrices demonstrate the potential of the proposed platform for rapid antibiotic sensing in food‐related environments. These findings significantly contribute to the development of practical metamaterial‐based sensing platforms for food safety applications.

  • Dual-tunable graphene–vanadium dioxide metasurface for adaptive terahertz wavefront control and electromagnetic interference suppression

    by Binggang Xiao, Minqin Jin, Haona Chen, Jiabin Yu

    The development of advanced terahertz systems requires compact and reconfigurable devices capable of adaptive wavefront manipulation and electromagnetic energy control. In this work, we propose a dual-tunable VO2–graphene coding metasurface that integrates thermally switchable vanadium dioxide and electrically tunable graphene within a multilayer unit-cell structure. The VO2 phase transition enables switching between reflection and absorption operation modes, while the graphene Fermi level provides active control of the reflection phase and absorption response. In the reflection mode, four discrete coding states are obtained by tuning the graphene Fermi level, and the reflection amplitudes remain above 0.7 within 5.4 to 5.6 THz. The phase differences between adjacent coding states are close to 90 deg, enabling 2-bit programmable beam manipulation. Based on 1-bit, 2-bit, and convolution-based coding strategies, the proposed metasurface realizes specular reflection, dual-beam splitting, four-beam scattering, and anomalous single-beam deflection, with the maximum elevation deflection angle reaching 26 deg. In the absorption mode, when VO2 is in the insulating state, the structure exhibits dual-band absorption near 1.2 and 2.6 THz, with the maximum absorptance reaching 99.8% under graphene Fermi-level tuning. A fabrication-oriented integration route is also discussed by considering graphene transfer, VO2 patterning, dielectric isolation, and separated thermal/electrical control channels. The simulation results indicate that the proposed VO2–graphene metasurface provides a feasible platform for adaptive terahertz wavefront control, reflective modulation, multiband absorption, and electromagnetic interference suppression, showing potential for smart THz imaging, modulation, and sensing systems.

  • Inverse design of tunable electromagnetically induced transparency terahertz metamaterial antibiotic sensor by improved transformer

    by Binggang Xiao, Zhenyang Ma, Wangyang Qiu, Xiaoyan Lu, Jiabin Yu, Hongmei Mi, Lihua Xiao

    We propose a graphene-based tunable EIT-like terahertz metamaterial antibiotic sensor, achieving dynamic tunability of the EIT-like sensor and improving the transformer network to enable rapid reverse design of the sensor. This EIT-like sensor is excited by two cloud-shaped graphene resonant rings, which generate an excitation–excitation coupling mode, with the center frequency of its transparent window located at 1 THz of the chlortetracycline fingerprint spectrum, capable of achieving specific sensing detection of chlortetracycline, with a sensing sensitivity of 220 GHz/RIU, a Q value of 13.6, and an figure of merit of 9.84. The sensor can adjust the EIT-like window by changing the Fermi level of graphene by adjusting the applied voltage. Meanwhile, an improved transformer network architecture is proposed. According to the characteristics of EIT spectral data, random position encoding is used in the embedding module, the normalization layer is moved forward in the encoding module, and the decoding module is optimized to a fully connected layer. Eventually, the mean squared error of the validation set is 0.019, providing a solution for the on-demand design of metamaterial devices.


  • QBIC-Terahertz Metasurface for Quantitative Detection of Chlorpyrifos in Soybean Oil in a Liquid State

    by Fang Wang, Gan Liu, Binggang Xiao, Jianyuan Qin

    Resonances originating from the concept of bound states in the continuum have been shown to produce high quality factors and strong field enhancements. Here, an ultra-sensitive terahertz metallic metasurface based on bound states in the continuum is developed to address the limited sensitivity of terahertz sensing technology. The metasurface employs a u-shaped resonator and a l-shaped resonator as the unit cell, and a resonance around 0.7 THz can be excited. The analysis of the quality factor and the band structure confirm that this resonance is induced by bound states in the continuum mode. Based on the calculations, it can be concluded that the frequency shift changes linearly as a function of analyte thickness within the range of 0 μm to 10 μm, and the sensitivity can be as high as 151 GHz/RIU. The feasibility of the detection of chlorpyrifos concentration in soybean oil is assessed experimentally, and a liquid cell is applied as sample holder to maintain the sample in a liquid state. It can be concluded that the metasurface enables effective detection of chlorpyrifos in soybean oil, with a limit of detection as low as 0.007 mg/L. Our work enables the detection of trace chlorpyrifos in soybean oil, facilitating the application of terahertz technology in food safety.

  • Ultra-highly sensitive THz metamaterial sensor based on electromagnetically induced transparency-like effect

    by Binggang Xiao, Yichun Wang, Xiuran Zuo, Luqi Liu, Wanshun Jiang, Yumei Zhang, Jianyuan Qin, Dongping Zhang, Lihua Xiao

    We propose and implement a highly sensitive terahertz antibiotic sensor based on a petal-shaped structure to address the optimization of the balance between device sensitivity and Q-factor, thereby enhancing detection accuracy. The device consists of a double-petal-shaped graphene resonator and a quartz dielectric layer, with a unit size of only 72 μm, offering advantages in miniaturization and integration. The sensor achieves strong near-field coupling between the dual bright modes of the resonator through its petal-shaped geometric structure, which enhances the electric field at the concave points, thereby exciting a sharp electromagnetically induced transparency (EIT) window at 1.0 THz. Theoretical calculations indicate that the device achieves a sensitivity of up to 1.225 THz/RIU, a Q-factor of 20.8, and a modulation depth of 43% by adjusting the Fermi level, demonstrating exceptional sensing performance.


  • A reconfigurable multi-passband multifunctional device for wireless communications based on spoof surface plasmon polaritons

    by Binggang Xiao, Wufu Zhu, Huan Lin, Jiabin Yu, Hongmei Mi, Lihua Xiao

    In this paper, we proposed a reconfigurable multi-passband multifunctional device for wireless communications based on spoof surface plasmon polaritons (SSPP). By integrating a digitized coding state and varactor diodes, the device dynamically adjusts SSPP dispersion characteristics, enabling both multi-passband filtering and 2FSK modulation. It supports dual- and triple-passband selection across 1.68–19.98 GHz, with transmission loss controlled under 2.68 dB, which is acceptable in specific short-range or device-integrated wireless communication applications and rejection above -20 dB, ensuring effective signal separation and frequency selection in complex environments. By combining digital coding with electronic bias control, the device also enables 2FSK modulation for multi-channel communication and multi-frequency signal processing. This approach effectively tackles high-frequency modulation challenges and enables artificial surface communication systems.