Sibele Berenice Castella Pergherd
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Interests
Sibele Berenice Castella Pergherd has a total of 434 co-authors. Here are the top co-authors by number of shared publications:
- Lindiane Bieseki
Molecular Sieves Laboratory (LABPEMOL), Chemistry Institut, Federal University of Rio Grande do Norte—UFRN, Av. 5 Senador Salgado Filho, 3000, Bairro Lagoa Nova, Natal 59072-970, RN, Brazil
21 shared publications - Paloma Vinaches
Brazilian Center for Research in Energy and Materials
16 shared publications - Anderson Joel Schwanke
Universidade Federal do Rio Grande do Norte – UFRN
11 shared publications - Avelino Corma
Instituto de Tecnología Química (ITQ), Consejo Superior de Investigaciones Científicas, Universitat Politècnica de València, Valencia, Spain
11 shared publications - Katia Bernardo-Gusmão
Universidade Federal do Rio Grande do Sul, Porto Alegre, Brazil
10 shared publications - Mariele Iara Soares de Mello
Laboratório de Peneiras Moleculares (LABPEMOL), Instituto de Química, Universidade Federal do Rio Grande do Norte, Av. 5 Senador Salgado Filho, 3000, Bairro Lagoa Nova, Natal 59072-970, RN, Brazil
10 shared publications
Latest Publications
- Open Access
- 20 April 2026
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 410
Cation exchange in RHO zeolite: the influence on the selective adsorption process of CO2 in relation to N2 and CH4
- 20 April 2026
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 410
Open AccessCation exchange in RHO zeolite: the influence on the selective adsorption process of CO2 in relation to N2 and CH4
- Open Access
- 25 February 2026
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 406
Impact of water on CO 2 adsorption in LTA zeolites with Na + and Ca2+: A molecular simulation approach
- 25 February 2026
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 406
Open AccessImpact of water on CO 2 adsorption in LTA zeolites with Na + and Ca2+: A molecular simulation approach
- Open Access
- 5 February 2026
- Published by Elsevier in SSRN Electronic Journal
Tailored Hierarchical Zeolites for Efficient Catalytic Upgrading of Furfural into Sustainable Aviation Fuel Precursors and Biofuels via Aldol Condensation and Domino Reactions
The selective upgrading of biomass-derived furfural into biofuel components and sustainable aviation fuel (SAF) precursors remains a key challenge in catalytic biomass valorization. In this work, hierarchical zeolites with distinct framework topologies (FAU, MFI, and MOR) were prepared via post-synthetic demetallation to enhance textural properties and tune acid-site accessibility. The resulting materials were systematically characterized by X-ray diffraction, N₂ physisorption, scanning electron microscopy, FTIR spectroscopy with pyridine adsorption, and solid-state NMR, enabling a comprehensive correlation of structure, acidity, and catalytic performance. The catalytic behavior of parent and hierarchical zeolites was evaluated in two representative furfural upgrading routes: (i) the conversion of furfural into isopropyl levulinate and (ii) the aldol condensation of furfural with acetone to produce C₈ oxygenated intermediates relevant to downstream fuel synthesis. Among the catalysts investigated, the hierarchical FAU zeolite (HY-T) exhibited superior activity and selectivity in both reactions, achieving furfural conversions above 60% and selectivities exceeding 80% toward isopropyl levulinate, with near-quantitative selectivity (>99%) toward the aldol condensation product. Hierarchical ZSM-5 catalysts showed moderate conversions and distinct selectivity patterns, associated with their medium-pore MFI topology and high Brønsted-to-Lewis acid site ratio, which favor competing reactions under the investigated conditions. In contrast, MOR-based zeolites displayed lower overall performance, mainly due to diffusional limitations imposed by their one-dimensional channel system, even after post-synthetic modification. The outstanding performance of HY-T is attributed to the synergistic combination of hierarchical porosity, improved molecular accessibility, and a more balanced distribution of Brønsted and Lewis acid sites, partly associated with extra-framework aluminum species.
- 5 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessTailored Hierarchical Zeolites for Efficient Catalytic Upgrading of Furfural into Sustainable Aviation Fuel Precursors and Biofuels via Aldol Condensation and Domino Reactions
The selective upgrading of biomass-derived furfural into biofuel components and sustainable aviation fuel (SAF) precursors remains a key challenge in catalytic biomass valorization. In this work, hierarchical zeolites with distinct framework topologies (FAU, MFI, and MOR) were prepared via post-synthetic demetallation to enhance textural properties and tune acid-site accessibility. The resulting materials were systematically characterized by X-ray diffraction, N₂ physisorption, scanning electron microscopy, FTIR spectroscopy with pyridine adsorption, and solid-state NMR, enabling a comprehensive correlation of structure, acidity, and catalytic performance. The catalytic behavior of parent and hierarchical zeolites was evaluated in two representative furfural upgrading routes: (i) the conversion of furfural into isopropyl levulinate and (ii) the aldol condensation of furfural with acetone to produce C₈ oxygenated intermediates relevant to downstream fuel synthesis. Among the catalysts investigated, the hierarchical FAU zeolite (HY-T) exhibited superior activity and selectivity in both reactions, achieving furfural conversions above 60% and selectivities exceeding 80% toward isopropyl levulinate, with near-quantitative selectivity (>99%) toward the aldol condensation product. Hierarchical ZSM-5 catalysts showed moderate conversions and distinct selectivity patterns, associated with their medium-pore MFI topology and high Brønsted-to-Lewis acid site ratio, which favor competing reactions under the investigated conditions. In contrast, MOR-based zeolites displayed lower overall performance, mainly due to diffusional limitations imposed by their one-dimensional channel system, even after post-synthetic modification. The outstanding performance of HY-T is attributed to the synergistic combination of hierarchical porosity, improved molecular accessibility, and a more balanced distribution of Brønsted and Lewis acid sites, partly associated with extra-framework aluminum species.
- Open Access
- 5 January 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 205
Eco-designed ultra-small copper/ionic liquid interfaces on layered niobates for hydrogen production via water-splitting and methanol photoreforming
- 5 January 2026
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 205
Open AccessEco-designed ultra-small copper/ionic liquid interfaces on layered niobates for hydrogen production via water-splitting and methanol photoreforming
- 1 January 2026
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
From Short-Range Order to Crystallinity: Structure-Property Relationships in Embryonic and Crystalline Zeolites
Zeolite synthesis is highly sensitive to small changes in various parameters. In recent years, interest has grown in so-called embryonic zeolites, materials that exhibit partially formed zeolite structures and extremely small particles. Understanding the mechanisms and factors that govern the synthesis, formation, and catalytic performance of these embryonic zeolites remains a significant scientific challenge. In this work, we investigated the formation and characterization of embryonic and crystalline MFI (ZSM-5) and FAU (Y) zeolite structures, exploring the correlations between the degree of structural organization and pore accessibility. For ZSM-5 zeolite, two distinct synthesis methodologies (A and B) were investigated, and the resulting samples showed differences in textural and structural properties. Samples from series A showed higher specific area values than those from series B. Furthermore, methodology A successfully synthesized embryonic zeolites, whereas methodology B did not. The main factor behind the observed differences may be the higher amount of directing agent used in methodology A compared with methodology B. For Y zeolite, the results obtained indicate that a long aging step alone is not enough to promote nucleation to a greater extent and form embryonic zeolites. Using seeds, although effective in reducing synthesis time, can be detrimental to embryonic nucleus formation. The results demonstrate how changes in parameters and pathways can influence zeolite synthesis and reinforce the need to develop different strategies to obtain embryonic structures from syntheses that do not use a directing agent.
- 1 January 2026
- Published by Sociedade Brasileira de Quimica (SBQ) in Journal of the Brazilian Chemical Society
From Short-Range Order to Crystallinity: Structure-Property Relationships in Embryonic and Crystalline Zeolites
Zeolite synthesis is highly sensitive to small changes in various parameters. In recent years, interest has grown in so-called embryonic zeolites, materials that exhibit partially formed zeolite structures and extremely small particles. Understanding the mechanisms and factors that govern the synthesis, formation, and catalytic performance of these embryonic zeolites remains a significant scientific challenge. In this work, we investigated the formation and characterization of embryonic and crystalline MFI (ZSM-5) and FAU (Y) zeolite structures, exploring the correlations between the degree of structural organization and pore accessibility. For ZSM-5 zeolite, two distinct synthesis methodologies (A and B) were investigated, and the resulting samples showed differences in textural and structural properties. Samples from series A showed higher specific area values than those from series B. Furthermore, methodology A successfully synthesized embryonic zeolites, whereas methodology B did not. The main factor behind the observed differences may be the higher amount of directing agent used in methodology A compared with methodology B. For Y zeolite, the results obtained indicate that a long aging step alone is not enough to promote nucleation to a greater extent and form embryonic zeolites. Using seeds, although effective in reducing synthesis time, can be detrimental to embryonic nucleus formation. The results demonstrate how changes in parameters and pathways can influence zeolite synthesis and reinforce the need to develop different strategies to obtain embryonic structures from syntheses that do not use a directing agent.
- Open Access
Palygorskite as an Extender Agent in Light Cement Pastes for Oil Wells: Performance Analysis
Cementing operations are among the most critical steps in oil-well construction. When performed improperly, the integrity and useful life of the well can be significantly compromised. Light cement pastes are used to cement formations with a low fracture gradient to ensure zonal isolation and maintain the integrity of the casing. Extenders are additives used to reduce the density of cement pastes, ensuring that the paste has desirable properties before and after setting. This work aimed to evaluate the application of palygorskite clay as an additive in lightweight cement pastes for oil wells, highlighting how its fibrous morphology influences the microstructure and enhances the macroscopic properties of the hardened cement matrix. For this, the clay sample was initially characterized regarding its physicochemical properties using X-ray diffraction (XRD), X-ray fluorescence (XRF), thermogravimetry (TG), textural analysis (BET/N2), and scanning electron microscopy (SEM). Lightweight pastes (1.56 g/cm3) were then formulated, varying the clay concentration by 1%, 3%, and 6% of the total mass. Cement pastes using bentonite were also formulated for comparison. Technological tests of atmospheric consistency, rheological behavior, free water, and stability were applied. It can be noted that the pastes formulated with palygorskite had lower viscosity, reflected in the reduced plastic viscosity and yield stress values, indicating easier flow behavior when compared with bentonite-based pastes. The pastes formulated with 6% palygorskite and 3% bentonite showed satisfactory stability and drawdown results. Therefore, applying palygorskite satisfies the minimum requirements for acting as an extending agent for lightweight cement pastes and is an option for application in oil-well cementing operations.
Open AccessPalygorskite as an Extender Agent in Light Cement Pastes for Oil Wells: Performance Analysis
Cementing operations are among the most critical steps in oil-well construction. When performed improperly, the integrity and useful life of the well can be significantly compromised. Light cement pastes are used to cement formations with a low fracture gradient to ensure zonal isolation and maintain the integrity of the casing. Extenders are additives used to reduce the density of cement pastes, ensuring that the paste has desirable properties before and after setting. This work aimed to evaluate the application of palygorskite clay as an additive in lightweight cement pastes for oil wells, highlighting how its fibrous morphology influences the microstructure and enhances the macroscopic properties of the hardened cement matrix. For this, the clay sample was initially characterized regarding its physicochemical properties using X-ray diffraction (XRD), X-ray fluorescence (XRF), thermogravimetry (TG), textural analysis (BET/N2), and scanning electron microscopy (SEM). Lightweight pastes (1.56 g/cm3) were then formulated, varying the clay concentration by 1%, 3%, and 6% of the total mass. Cement pastes using bentonite were also formulated for comparison. Technological tests of atmospheric consistency, rheological behavior, free water, and stability were applied. It can be noted that the pastes formulated with palygorskite had lower viscosity, reflected in the reduced plastic viscosity and yield stress values, indicating easier flow behavior when compared with bentonite-based pastes. The pastes formulated with 6% palygorskite and 3% bentonite showed satisfactory stability and drawdown results. Therefore, applying palygorskite satisfies the minimum requirements for acting as an extending agent for lightweight cement pastes and is an option for application in oil-well cementing operations.
- 28 May 2025
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 32 (24) , 14584-14600
SBA-15 with different morphologies applied as adsorbent for emerging contaminants: experimental and molecular simulation studies
This study brings the use of SBA-15 with different morphologies to the adsorption of Bisphenol, Ciprofloxacin, and Losartan. Experimental and molecular simulation studies were carried out using spherical morphologies, hexagonal prisms, rice grains, and rods. All materials presented different proportions of the silanol group, observed by FTIR and NMR techniques. The hexagonal-CIP prism presented the best adsorbate-adsorbent system with removal of 66.41% and Q of 0.068 mmol g−1. Molecular simulation showed interactions between SBA-15 and emerging contaminants. The kinetics revealed an equilibrium plateau at 50 min, and the pseudo-first-order model best matched the experimental data for describing the kinetic behavior. The equilibrium study indicated improved adsorption capacity at 35 °C, with the B.E.T. Isotherm model providing the best fit. Finally, the adsorption mechanism was elucidated and showed the existence of interactions between the silanol groups and the different active sites of the molecule. Graphical abstract
- 28 May 2025
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 32 (24) , 14584-14600
SBA-15 with different morphologies applied as adsorbent for emerging contaminants: experimental and molecular simulation studies
This study brings the use of SBA-15 with different morphologies to the adsorption of Bisphenol, Ciprofloxacin, and Losartan. Experimental and molecular simulation studies were carried out using spherical morphologies, hexagonal prisms, rice grains, and rods. All materials presented different proportions of the silanol group, observed by FTIR and NMR techniques. The hexagonal-CIP prism presented the best adsorbate-adsorbent system with removal of 66.41% and Q of 0.068 mmol g−1. Molecular simulation showed interactions between SBA-15 and emerging contaminants. The kinetics revealed an equilibrium plateau at 50 min, and the pseudo-first-order model best matched the experimental data for describing the kinetic behavior. The equilibrium study indicated improved adsorption capacity at 35 °C, with the B.E.T. Isotherm model providing the best fit. Finally, the adsorption mechanism was elucidated and showed the existence of interactions between the silanol groups and the different active sites of the molecule. Graphical abstract
- Open Access
Synthesis MFI Zeolites Using Alternative Silica Source for CO2 Capture
In recent years, climate change has attracted the attention of the scientific community. These changes are attributed to human action, which is responsible for the emission of polluting gases, mainly through the burning of fossil fuels, deforestation, and industrial processes that are responsible for the greenhouse effect. Post-combustion CO2 capture using solid adsorbents is a technology that is currently gaining prominence as an alternative and viable form of capture to other industrial processes used. Zeolites are adsorbents capable of capturing CO2 selectively due to their properties such as textural properties, high surface area, and active sites. In this context, this work developed materials with a zeolite structure with an alternative low-cost silica source from beach sand, called MPI silica, to make the process eco-friendly. Crystallization time studies were carried out for materials containing MFI-type zeolites with MPI silica with a time of 15 h (ZM 15 h) and 3 days (SM 3 d), with relative crystallinities of 92.90% and 111.90%, respectively. The synthesized materials were characterized by several techniques such as X-ray diffraction (XRD), X-ray fluorescence (XRF), the textural analysis of N2 adsorption/desorption isotherms, absorption spectroscopy in the infrared region with Fourier transform (FTIR), scanning electron microscopy (SEM), and thermal analysis. The evaluation of the experimental adsorption isotherms showed that the best results were for the zeolites synthesized in the basic medium, namely ZMP 3 d, ZM 10.5 h, and ZM 15 h, with capacities of 3.72, 3.10, and 3.22 mmol/g of CO2, respectively, and in the hydrofluoric medium, namely SP 9 d, SM 3 d, and SM 6 d, with capacities of 3.94, 3.78, and 3.60 mmol/g of CO2, respectively. The evaluation of the mathematical models indicated that the zeolites in the basic medium best fitted the Freündlich model, namely ZMP 3 d, ZM 10.5 h, and ZM 15 h, with capacities of 2.56, 1.68, and 1.87 mmol/g of CO2, respectively. The zeolites in the hydrofluoric medium are adjusted to the Langmuir model (SP 9 d and SM 3 d) and Temkin model (SM 6 d), with capacities of 3.79, 2.23, and 2.11 mmol/g of CO2, respectively.
Open AccessSynthesis MFI Zeolites Using Alternative Silica Source for CO2 Capture
In recent years, climate change has attracted the attention of the scientific community. These changes are attributed to human action, which is responsible for the emission of polluting gases, mainly through the burning of fossil fuels, deforestation, and industrial processes that are responsible for the greenhouse effect. Post-combustion CO2 capture using solid adsorbents is a technology that is currently gaining prominence as an alternative and viable form of capture to other industrial processes used. Zeolites are adsorbents capable of capturing CO2 selectively due to their properties such as textural properties, high surface area, and active sites. In this context, this work developed materials with a zeolite structure with an alternative low-cost silica source from beach sand, called MPI silica, to make the process eco-friendly. Crystallization time studies were carried out for materials containing MFI-type zeolites with MPI silica with a time of 15 h (ZM 15 h) and 3 days (SM 3 d), with relative crystallinities of 92.90% and 111.90%, respectively. The synthesized materials were characterized by several techniques such as X-ray diffraction (XRD), X-ray fluorescence (XRF), the textural analysis of N2 adsorption/desorption isotherms, absorption spectroscopy in the infrared region with Fourier transform (FTIR), scanning electron microscopy (SEM), and thermal analysis. The evaluation of the experimental adsorption isotherms showed that the best results were for the zeolites synthesized in the basic medium, namely ZMP 3 d, ZM 10.5 h, and ZM 15 h, with capacities of 3.72, 3.10, and 3.22 mmol/g of CO2, respectively, and in the hydrofluoric medium, namely SP 9 d, SM 3 d, and SM 6 d, with capacities of 3.94, 3.78, and 3.60 mmol/g of CO2, respectively. The evaluation of the mathematical models indicated that the zeolites in the basic medium best fitted the Freündlich model, namely ZMP 3 d, ZM 10.5 h, and ZM 15 h, with capacities of 2.56, 1.68, and 1.87 mmol/g of CO2, respectively. The zeolites in the hydrofluoric medium are adjusted to the Langmuir model (SP 9 d and SM 3 d) and Temkin model (SM 6 d), with capacities of 3.79, 2.23, and 2.11 mmol/g of CO2, respectively.
- Open Access
- 31 March 2025
- Published by MDPI AG in Sustainable Chemistry
- Vol. 6 (2) , 11
Cultivation of Chlorella sp. in a Closed System Using Mining Wastewater and Simulated Flue Gas: Biomass Production and CO2 Fixation Potential
Chlorella sp. was cultivated in a closed system using PET bottles (5 L) and with the continuous injection of air and commercial gas (98% CO2) and in simulated conditions (15% CO2, 73% N2, and 12% O2). The culture medium was prepared using well water and mining wastewater, the cultivation period occurred in a 10-day cycle, and the cell growth curves were evaluated through cell counting using a Neubauer chamber. The cultivation was carried out under the following conditions: temperature at 22 °C to 25 °C; aeration rate with commercial and simulated CO2 gas at 0.01 vvm; and synthetic air containing 0.042% CO2. The dry biomass productivity was 0.81 g·L−1·day−1 and the maximum CO2 fixation rate was 0.90 g·L−1·day−1 when the microalgae were cultivated with a continuous flow of simulated waste gas and a culture medium composed of wastewater. The percentages of macromolecules obtained in the biomass cultivated in wastewater reached 20.95%, 26.48%, and 9.3% for lipids, proteins, and carbohydrates, respectively.
- 31 March 2025
- Published by MDPI AG in Sustainable Chemistry
- Vol. 6 (2) , 11
Open AccessCultivation of Chlorella sp. in a Closed System Using Mining Wastewater and Simulated Flue Gas: Biomass Production and CO2 Fixation Potential
Chlorella sp. was cultivated in a closed system using PET bottles (5 L) and with the continuous injection of air and commercial gas (98% CO2) and in simulated conditions (15% CO2, 73% N2, and 12% O2). The culture medium was prepared using well water and mining wastewater, the cultivation period occurred in a 10-day cycle, and the cell growth curves were evaluated through cell counting using a Neubauer chamber. The cultivation was carried out under the following conditions: temperature at 22 °C to 25 °C; aeration rate with commercial and simulated CO2 gas at 0.01 vvm; and synthetic air containing 0.042% CO2. The dry biomass productivity was 0.81 g·L−1·day−1 and the maximum CO2 fixation rate was 0.90 g·L−1·day−1 when the microalgae were cultivated with a continuous flow of simulated waste gas and a culture medium composed of wastewater. The percentages of macromolecules obtained in the biomass cultivated in wastewater reached 20.95%, 26.48%, and 9.3% for lipids, proteins, and carbohydrates, respectively.