David E. Chavez
Research Subjects
Research Interests
David E. Chavez has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
Damon A. Parrish
U.S. Naval Research Laboratory, Washington, D.C.20375, United States
25 shared publications- Christopher J. Snyder
Q-5, Los Alamos National Laboratory, Los Alamos, New Mexico 87545, United States
9 shared publications - Jacqueline M. Veauthier
Chemistry Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545, United States
7 shared publications Damon Parrish
Naval Research Laboratory, Laboratory for the Structure of Matter, Washington, D.C. 20375, USA
5 shared publications- Gregory H. Imler
Naval Research Laboratory, Washington, USA
5 shared publications Michael A. Hiskey
DMD Systems, P.O. Box 635, Los Alamos, NM, 87544, USA
5 shared publications
Latest Publications
- Open Access
- 8 May 2026
- Published by American Chemical Society (ACS) in ACS Polymers Au
- Vol. 6 (4) , 1088-1095
The Synthesis and Ring-Opening Metathesis Polymerization of Energetic Norbornene Materials
Energetic norbornenes are promising candidates toward the development of new energetic polymers due to the synthetic versatility of norbornene ring-opening metathesis polymerizations used in commercial applications. We report the synthesis of two energetic norbornene materials that can be made in two steps with modest yields, containing either trinitroethanol or fluorodinitroethanol substituents. The norbornene monomers were then polymerized, and the polymers were characterized by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), contact angle measurements, and proton and carbon nuclear magnetic resonance spectroscopies (1H and 13C{1H} NMR). Additionally, small-scale safety data consisting of electrostatic discharge (ESD), friction (FS), and impact (IS) sensitivities were measured for the norbornene monomers and their resulting polymers. These analyses revealed that energetic norbornene materials are relatively insensitive and have densities comparable to that of TNT (1.47–1.81 g·cm–3).
- 8 May 2026
- Published by American Chemical Society (ACS) in ACS Polymers Au
- Vol. 6 (4) , 1088-1095
Open AccessThe Synthesis and Ring-Opening Metathesis Polymerization of Energetic Norbornene Materials
Energetic norbornenes are promising candidates toward the development of new energetic polymers due to the synthetic versatility of norbornene ring-opening metathesis polymerizations used in commercial applications. We report the synthesis of two energetic norbornene materials that can be made in two steps with modest yields, containing either trinitroethanol or fluorodinitroethanol substituents. The norbornene monomers were then polymerized, and the polymers were characterized by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), contact angle measurements, and proton and carbon nuclear magnetic resonance spectroscopies (1H and 13C{1H} NMR). Additionally, small-scale safety data consisting of electrostatic discharge (ESD), friction (FS), and impact (IS) sensitivities were measured for the norbornene monomers and their resulting polymers. These analyses revealed that energetic norbornene materials are relatively insensitive and have densities comparable to that of TNT (1.47–1.81 g·cm–3).
- Open Access
- 18 June 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (25) , 27317-27322
Investigation into the Synthesis of Several TATB-Inspired Energetic Materials
The synthesis and characterization of several TATB-inspired energetic materials was explored. Despite their structural similarity to TATB, their behavior toward traditional synthetic pathways deviates significantly from that of the parent material. This change in expected reactivity is discussed and an efficient alternative synthesis is reported. The development of a simple and effective route to these TATB-type compounds opens the door to a potential new class of insensitive high explosives.
- 18 June 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (25) , 27317-27322
Open AccessInvestigation into the Synthesis of Several TATB-Inspired Energetic Materials
The synthesis and characterization of several TATB-inspired energetic materials was explored. Despite their structural similarity to TATB, their behavior toward traditional synthetic pathways deviates significantly from that of the parent material. This change in expected reactivity is discussed and an efficient alternative synthesis is reported. The development of a simple and effective route to these TATB-type compounds opens the door to a potential new class of insensitive high explosives.
- 8 October 2024
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 89 (21) , 15583-15589
Investigation of the Synthesis and Energetic Properties of an ANTA-Based Energetic Plasticizer
Energetic plasticizers are being sought for their use in energetic formulations when combined with explosives. An energetic plasticizer based on the insensitive highly explosive 3-amino-5-nitro-l,2,4-triazole (ANTA) was synthesized and characterized by spectroscopy, X-ray crystallography, thermal analyses, and safety testing. Lastly, density functional theory calculations were employed to examine the observed selectivity among the three nucleophilic ring nitrogen atoms of ANTA toward electrophiles such as ANTA acrylate; this selectivity was found to be a combination of steric, electronic, and hydrogen bonding effects.
- 8 October 2024
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 89 (21) , 15583-15589
Investigation of the Synthesis and Energetic Properties of an ANTA-Based Energetic Plasticizer
Energetic plasticizers are being sought for their use in energetic formulations when combined with explosives. An energetic plasticizer based on the insensitive highly explosive 3-amino-5-nitro-l,2,4-triazole (ANTA) was synthesized and characterized by spectroscopy, X-ray crystallography, thermal analyses, and safety testing. Lastly, density functional theory calculations were employed to examine the observed selectivity among the three nucleophilic ring nitrogen atoms of ANTA toward electrophiles such as ANTA acrylate; this selectivity was found to be a combination of steric, electronic, and hydrogen bonding effects.
- Open Access
- 13 October 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (42) , 38879-38884
Synthesis, Characterization, and Energetic Properties of Nitrate Ester Acrylate Polymer
An energetic nitrate ester acrylate monomer (4) was synthesized in a total yield of 68% and polymerized to form the energetic nitrate ester acrylate polymer (NEAP). Compound 4 is a liquid at room temperature with a melting point of -8.6 degrees C and NEAP is a solid with a glass-transition temperature of -8.8 degrees C. Intermediates leading to 4 and NEAP were characterized by high-resolution mass spectrometry, elemental analysis, Fourier transform infrared spectroscopy, and proton and carbon nuclear magnetic resonance spectroscopies (H-1 and C-13{H-1} NMR). Both 4 and NEAP have electrostatic discharge, friction, and impact sensitivities comparable to those of trinitrotoluene, making NEAP a potential candidate for advanced energetic formulations.
- 13 October 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (42) , 38879-38884
Open AccessSynthesis, Characterization, and Energetic Properties of Nitrate Ester Acrylate Polymer
An energetic nitrate ester acrylate monomer (4) was synthesized in a total yield of 68% and polymerized to form the energetic nitrate ester acrylate polymer (NEAP). Compound 4 is a liquid at room temperature with a melting point of -8.6 degrees C and NEAP is a solid with a glass-transition temperature of -8.8 degrees C. Intermediates leading to 4 and NEAP were characterized by high-resolution mass spectrometry, elemental analysis, Fourier transform infrared spectroscopy, and proton and carbon nuclear magnetic resonance spectroscopies (H-1 and C-13{H-1} NMR). Both 4 and NEAP have electrostatic discharge, friction, and impact sensitivities comparable to those of trinitrotoluene, making NEAP a potential candidate for advanced energetic formulations.
- 11 October 2023
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 88 (20) , 14404-14412
Investigation into a Conformationally Locked (Z)-Azidoxime
High nitrogen compounds find wide use in the development of new propellants and explosives as well as pharmaceutical chemistry as bioisosteres, bacterial stains, and antifungal agents. A class of underexplored high-nitrogen materials includes azidoximes and their 1-hydroxytetrazole isomers. Azidoximes possess an energetic azide group and are quite sensitive to impact, spark, and friction. Therefore, these materials are generated in situ and cyclized under mild acidic conditions to their 1-hydroxytetrazole isomers. Recently, we synthesized a novel 1,2,4-triazine-derived azidoxime; however, upon subjecting this material to established cyclization conditions, no reaction was observed, even after prolonged reaction times with heating. Additional 1,2,4-triazine-derived azidoximes also displayed a similar lack of reactivities. This observation led us to probe the reactivity of these materials with both a DFT investigation and crystallographically based electrostatic potential mapping. In all, the lack of reactivity toward cyclization was found to be due to an inability of 1,2,4-triazine-based azidoximes to isomerize into the reactive (E)-conformation, requiring an activation energy of 26.4 kcal mol-1.
- 11 October 2023
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 88 (20) , 14404-14412
Investigation into a Conformationally Locked (Z)-Azidoxime
High nitrogen compounds find wide use in the development of new propellants and explosives as well as pharmaceutical chemistry as bioisosteres, bacterial stains, and antifungal agents. A class of underexplored high-nitrogen materials includes azidoximes and their 1-hydroxytetrazole isomers. Azidoximes possess an energetic azide group and are quite sensitive to impact, spark, and friction. Therefore, these materials are generated in situ and cyclized under mild acidic conditions to their 1-hydroxytetrazole isomers. Recently, we synthesized a novel 1,2,4-triazine-derived azidoxime; however, upon subjecting this material to established cyclization conditions, no reaction was observed, even after prolonged reaction times with heating. Additional 1,2,4-triazine-derived azidoximes also displayed a similar lack of reactivities. This observation led us to probe the reactivity of these materials with both a DFT investigation and crystallographically based electrostatic potential mapping. In all, the lack of reactivity toward cyclization was found to be due to an inability of 1,2,4-triazine-based azidoximes to isomerize into the reactive (E)-conformation, requiring an activation energy of 26.4 kcal mol-1.
- Open Access
- 16 May 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (21) , 18408-18413
Synthesis and Energetic Properties of N-Substituted 3,4- and 3,5-Dinitropyrazoles
- 16 May 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (21) , 18408-18413
Open AccessSynthesis and Energetic Properties of N-Substituted 3,4- and 3,5-Dinitropyrazoles
- Open Access
- 9 September 2022
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 47 (10)
Synthesis of a New 1,2,4‐Triazine Derived Azidoxime
A 1,2,4‐triazine based azidoxime was formed via the substitution of a chloroxime (3) with sodium azide in ethanol. This compound was characterized via single‐crystal X‐ray diffraction. This material has a calculated density of 1.746 g ⋅ cm−3 and is less sensitive to impact, spark, and friction, as compared to PETN and RDX. The dehydrated material has a calculated density of 1.823 g ⋅ cm−3 and the detonation pressure and velocity of 4 are calculated to be 29.1 GPa and 8.67 km ⋅ s−1, respectively.
- 9 September 2022
- Published by Wiley in Propellants, Explosives, Pyrotechnics
- Vol. 47 (10)
Open AccessSynthesis of a New 1,2,4‐Triazine Derived Azidoxime
A 1,2,4‐triazine based azidoxime was formed via the substitution of a chloroxime (3) with sodium azide in ethanol. This compound was characterized via single‐crystal X‐ray diffraction. This material has a calculated density of 1.746 g ⋅ cm−3 and is less sensitive to impact, spark, and friction, as compared to PETN and RDX. The dehydrated material has a calculated density of 1.823 g ⋅ cm−3 and the detonation pressure and velocity of 4 are calculated to be 29.1 GPa and 8.67 km ⋅ s−1, respectively.
- 2 February 2021
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 21 (3) , 1401-1405
Synergetic Explosive Performance through Cocrystallization
- 2 February 2021
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 21 (3) , 1401-1405
Synergetic Explosive Performance through Cocrystallization
- 4 November 2020
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 59 (22) , 16109-16116
Lanthanide Complexes of Bis(tetrazolato)amine: A Route to Lanthanide Nitride Foams
Metal nitrides are strong refractory ceramic materials known for applications in the coatings, catalysis, and semiconductor industries. Lanthanide nitrides are difficult to prepare in high purity and often require high temperatures and sophisticated equipment. In this work, we present an approach to the synthesis of high-purity f-element nitrides through the use of simple lanthanide salts and the nitrogen-rich ligand 5,5′-bis(1H-tetrazolyl)amine (H2BTA) to form lanthanide complexes of 5,5′-bis(tetrazolato)amine (BTA2−). We have demonstrated that, when dehydrated, these types of complexes undergo a self-sustained combustion reaction under an inert atmosphere to yield nanostructured f-element nitride foams for lanthanum and cerium. The synthesis, characterization, and single-crystal X-ray crystallography of the BTA2− complexes of lanthanum, cerium, praseodymium, neodymium, and europium are also discussed.
- 4 November 2020
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 59 (22) , 16109-16116
Lanthanide Complexes of Bis(tetrazolato)amine: A Route to Lanthanide Nitride Foams
Metal nitrides are strong refractory ceramic materials known for applications in the coatings, catalysis, and semiconductor industries. Lanthanide nitrides are difficult to prepare in high purity and often require high temperatures and sophisticated equipment. In this work, we present an approach to the synthesis of high-purity f-element nitrides through the use of simple lanthanide salts and the nitrogen-rich ligand 5,5′-bis(1H-tetrazolyl)amine (H2BTA) to form lanthanide complexes of 5,5′-bis(tetrazolato)amine (BTA2−). We have demonstrated that, when dehydrated, these types of complexes undergo a self-sustained combustion reaction under an inert atmosphere to yield nanostructured f-element nitride foams for lanthanum and cerium. The synthesis, characterization, and single-crystal X-ray crystallography of the BTA2− complexes of lanthanum, cerium, praseodymium, neodymium, and europium are also discussed.
- 27 February 2020
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 85 (7) , 4619-4626
Synthesis of Erythritol Tetranitrate Derivatives: Functional Group Tuning of Explosive Sensitivity
Understanding the factors that affect explosive sensitivity is paramount to the safe handling and development new explosives molecules. Erythritol tetranitrate (ETN) is an explosive that recently has attracted significant attention in the explosives community due to its ease of synthesis and physical properties. Herein we report the synthesis of ETN derivatives using azide, nitramine and nitrate ester functional groups. Impact, spark, and friction sensitivity measurements, computationally calculated explosive properties and crystal structure analysis of the ETN derivatives are reported. Mixing explosive functional groups led to changes in explosive sensitivity, explosive performance as well as physical properties including melting point and physical state at room temperature. Overall, we have demonstrated that combining functional groups can enable the tuning of explosive and physical properties of a molecule. This tune-ability can potentially aid in the development of new explosives in which characteristics are varied to meet certain specifications.
- 27 February 2020
- Published by American Chemical Society (ACS) in The Journal of Organic Chemistry
- Vol. 85 (7) , 4619-4626
Synthesis of Erythritol Tetranitrate Derivatives: Functional Group Tuning of Explosive Sensitivity
Understanding the factors that affect explosive sensitivity is paramount to the safe handling and development new explosives molecules. Erythritol tetranitrate (ETN) is an explosive that recently has attracted significant attention in the explosives community due to its ease of synthesis and physical properties. Herein we report the synthesis of ETN derivatives using azide, nitramine and nitrate ester functional groups. Impact, spark, and friction sensitivity measurements, computationally calculated explosive properties and crystal structure analysis of the ETN derivatives are reported. Mixing explosive functional groups led to changes in explosive sensitivity, explosive performance as well as physical properties including melting point and physical state at room temperature. Overall, we have demonstrated that combining functional groups can enable the tuning of explosive and physical properties of a molecule. This tune-ability can potentially aid in the development of new explosives in which characteristics are varied to meet certain specifications.