TNTakahiro Nitta

Takahiro Nitta

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Takahiro Nitta has a total of 54 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Computational Investigation of How Spatial Myosin Motor Clustering Regulates Actin Filament Mechanics and Motor Engagement

    by Morris Muriithi Wachira, Douglas Kagoiya Ng'ANg'A, Takahiro Nitta, Samuel Macharia Kang'IRi

    In in vitro motility assays, myosin motors are conventionally modeled as uniformly distributed across the substrate. In practice, both engineered assay surfaces and cellular actomyosin networks present motors in discrete spatial clusters, and how this organization affects filament mechanics and motor engagement remains poorly understood. Here we develop a two-dimensional Brownian dynamics model of actin filament transport over a spatially patterned motor field. Using a full 3×3×3 factorial design, we independently varied cluster density, cluster radius, and clustering fraction while holding the total motor number constant, and combined these three parameters into a single clustering index representing overall clustering intensity to permit comparison across geometries. Filament mechanics were quantified by the persistence length of the filament contour, and motor engagement dynamics by the coefficient of variation of the bound-motor count. Mean persistence length increased primarily with cluster radius, and depended on clustering fraction only through its interaction with cluster density. Bound-motor fluctuations behaved differently, increasing strongly with both cluster density and cluster radius, and were most sensitive to clustering fraction at intermediate cluster densities. The clustering index captured the overall rise in both responses with clustering intensity, but geometries sharing similar index values produced measurably different mechanical and kinetic behavior, showing that a single scalar descriptor does not fully collapse the response surface. Spatial motor organization therefore governs actin filament transport through two separable pathways: a mechanical pathway set by the length scale over which motors engage the filament, and a kinetic pathway set by the statistics of motor binding and release. Motor geometry should accordingly be represented explicitly when modeling actomyosin systems, and treated as a design variable when engineering biomolecular transport platforms.

  • Computational Investigation of How Spatial Myosin Motor Clustering Regulates Actin Filament Mechanics and Motor Engagement

    by Morris Muriithi Wachira, Douglas Kagoiya Ng'ANg'A, Takahiro Nitta, Samuel Macharia Kang'IRi

    In in vitro motility assays, myosin motors are conventionally modeled as uniformly distributed across the substrate. In practice, both engineered assay surfaces and cellular actomyosin networks present motors in discrete spatial clusters, and how this organization affects filament mechanics and motor engagement remains poorly understood. Here we develop a two-dimensional Brownian dynamics model of actin filament transport over a spatially patterned motor field. Using a full 3×3×3 factorial design, we independently varied cluster density, cluster radius, and clustering fraction while holding the total motor number constant, and combined these three parameters into a single clustering index representing overall clustering intensity to permit comparison across geometries. Filament mechanics were quantified by the persistence length of the filament contour, and motor engagement dynamics by the coefficient of variation of the bound-motor count. Mean persistence length increased primarily with cluster radius, and depended on clustering fraction only through its interaction with cluster density. Bound-motor fluctuations behaved differently, increasing strongly with both cluster density and cluster radius, and were most sensitive to clustering fraction at intermediate cluster densities. The clustering index captured the overall rise in both responses with clustering intensity, but geometries sharing similar index values produced measurably different mechanical and kinetic behavior, showing that a single scalar descriptor does not fully collapse the response surface. Spatial motor organization therefore governs actin filament transport through two separable pathways: a mechanical pathway set by the length scale over which motors engage the filament, and a kinetic pathway set by the statistics of motor binding and release. Motor geometry should accordingly be represented explicitly when modeling actomyosin systems, and treated as a design variable when engineering biomolecular transport platforms.

  • Automated Measurement of Microtubule Motility Parameters Using a Deep Neural Network Trained with Physics Based Synthetic Data

    by Kimande Jethro Wanjala, Takahiro Nitta

    Biomolecular motors carry molecular cargo or generate force. For example, kinesin transports intracellular cargos by walking along filaments called microtubules. In in vitro motility assays, microtubules are made to glide over surface-immobilized kinesins. The accurate measurement of microtubule dynamics, such as length, is critical for understanding intracellular transport. In measuring these microtubule parameters, researchers often rely on manual methods which are time consuming and less accurate due to human bias. Advanced algorithmic tracking methods can fit 2D Gaussian models to localize filaments with subpixel resolution but remain sensitive to fluorescence quality and manual intervention. Machine learning models can offer automated, robust, and high-throughput tracking solutions. However, the primary bottleneck in training such models is the limited availability of large annotated experimental data. To bridge this gap, a dataset of 12,000 synthetic images was generated using off-lattice Monte Carlo simulations of microtubules gliding over kinesin motors, with known lengths of 5 um to 11 um, a speed of 850 nm/s, and a diameter of 25 nm. To mimic the observable microtubules in fluorescence microscopy, the generated matrices were subsequently convolved with optical blurring (via Point Spread Functions) and digital camera sensor noise with a mean intensity of 50. These physics-based simulations provided ground truth data, that was used to train a deep U-Net convolutional neural network for automating the segmentation and measurement of the microtubule physical properties. A test on 50 synthetic single microtubule images, our method achieved a 0.069 pixel centerline deviation and 0.04 pixel length loss, versus 0.087 and 0.012 with conventional method. This automated approach is expected to reduce human bias, ensuring reproducible, high-throughput, and sub-pixel measurements, extendable to other structures like actin filaments. In addition, this research is expected to accelerate the automated design and testing of active nanoscale transport systems for motor proteins dependent biosensor technologies.

  • Energetics of the Spontaneous Beating of Motor-Driven Filaments

    by Jane Wanja Karanja, Douglas Kagoiya Ng’ANg’A, Takahiro Nitta

    Cilia and flagella beat through the collective action of molecular motors, driving fluid transport and cell motility, and are an attractive template for engineered actuators. The follower force model captures spontaneous beating in minimal reconstituted systems, but treats motor activity as a uniform, constant force density and so cannot resolve how individual motors supply and dissipate the energy that sustains oscillation. We simulated a microtubule (MT, 5–30 μm long) clamped at its minus end and driven by randomly distributed surface-immobilized kinesins (5–50 motors/μm²). Each motor was modelled as a linear spring (k = 100 pN/ μm) with load-dependent velocity (unloaded 0.8 μm/s, stall force 5 pN) and force-dependent detachment (detachment force 7 pN). Dynamics were obtained by solving overdamped equations, with hydrodynamics included only as local isotropic drag. Beating emerged from a localized buckling instability once the motor force exceeded a critical threshold set by MT length and motor density, with frequencies of 30–50 mHz. Bending waves travelled from the clamped end to the free end at ~0.8 μm/s, the unloaded kinesin velocity. Frequency scaled with motor density with an exponent of 0.27 ± 0.01, much weaker than the 4/3 predicted by the follower force model; we attribute this discrepancy to the mechanical interaction between the filament and kinesin. Amplitude scaled with an exponent of −0.27 ± 0.02, consistent with the scaling of the buckling wavelength. These results show that motor protein mechanics govern the energetics of wave-like beating in actively driven filaments and can guide the design of micro- and nanoscale devices for fluid pumping and mixing.

  • Active filament dynamics as a manifestation of microtubule mechanics

    by Douglas Kagoiya Ng’ANg’A, Jane Wanja Karanja, Takahiro Nitta

  • Open Access

    Active spiralling of microtubules driven by kinesin motors

    by Douglas Kagoiya Ng’aNg’a, Samuel Macharia Kang’iRi, Henry Hess, Takahiro Nitta

    Cytoskeletal filaments propelled by surface-bound motor proteins can be viewed as active polymers, a class of active matter. When constraints are imposed on their movements, the propelled cytoskeletal filaments show dynamic patterns distinct from equilibrium conformations. Pinned at their leading ends, propelled microtubules or actin filaments form rotating spirals, whose shape is determined by the interplay between motor forces and the mechanics of the cytoskeletal filaments. We simulated the spiral formations of microtubules propelled by kinesin motors in an overdamped dynamics framework, which in addition to the mechanics of the spiralling microtubule explicitly includes the mechanics of kinesin motors. The simulation revealed that spiral formation was initiated by localized buckling of microtubules near the pinned ends, and the conditions for occurrence of spiral formation were summarized in a phase diagram. The radius of the formed spirals scaled with the surface motor density with an exponent of approximately − 1/4, distinct from previous theoretical and simulation studies based on implicit modelling of motor proteins. This result can be understood as a consequence of the contributions of kinesin motors to the total elastic deformation energy, highlighting the importance of mechanics of motor proteins in the behaviour of the active polymers. These findings can be useful in accurate modelling of active polymers and in designing active polymer-based applications such as molecular shuttles driven by motor proteins.


  • Open Access

    Contractile and Tensile Measurement of Molecular Artificial Muscles for Biohybrid Robotics

    by Yingzhe Wang, Kaoru Uesugi, Takahiro Nitta, Yuichi Hiratsuka, Keisuke Morishima

    A printable artificial muscle assembled from biomolecular motors, which we have recently developed, showed great potential in overcoming the design limitations of conventional biohybrid robots as a new bio-actuator. Characterizing its contractility for extending its applicability is important. However, conventional measurement methods are composed of complex operations with poor reproducibility, flexibility, and real-time responsiveness. This study presents a new method for measuring the contractile force generated by artificial muscles. A measurement system was constructed, wherein artificial muscles were patterned by UV laser scanning in an oil-sealed microchamber, and the contractile force was measured in real time using a microforce sensor extended by a 3D-printed microcantilever. The measurement accuracy of the sensor was ensured through calibration and correction. For demonstration purposes, a series of contractile measurements were carried out using the proposed system. The relationship between contractile force and the dimensions of the activation space of the artificial muscles, as well as the tensile properties of the contracted muscle chain were evaluated. The results will help characterize the contractile properties of the artificial muscle and lay the foundations for its further application in biohybrid robotics.


  • In situ integrated microrobots driven by artificial muscles built from biomolecular motors

    by Yingzhe Wang, Takahiro Nitta, Yuichi Hiratsuka, Keisuke Morishima

    Microrobots have been developed for applications in the submillimeter domain such as the manipulation of micro-objects and microsurgery. Rapid progress has been achieved in developing miniaturized components for microrobotic systems, resulting in a variety of functional microactuators and soft components for creating untethered microrobots. Nevertheless, the integration of microcomponents, especially the assembly of actuators and mechanical components, is still time-consuming and has inherent restrictions, thus limiting efficient fabrications of microrobots and their potential applications. Here, we propose a method for fabricating microrobots in situ inspired by the construction of microsystems in living organisms. In a microfluidic chip, hydrogel mechanical components and artificial muscle actuators are successively photopatterned from hydrogel prepolymer and biomolecular motors, respectively, and integrated in situ into functional microrobots. The proposed method allows the fast fabrication of microrobots through simple operations and affordable materials while providing versatile functions through the precise spatiotemporal control of in situ integration and reconfiguration of artificial muscles. To validate the method, we fabricated microrobots to elicit different motions and on-chip robots with unique characteristics for microfluidic applications. This study may establish a new paradigm for microrobot integration and lead to the production of unique biohybrid microrobots with various advantages.


  • Motility Resilience of Molecular Shuttles Against Defective Motors

    by Samuel Macharia Kang'IRi, Takahiro Nitta

    Myosin and kinesin are biomolecular motors found in living cells. By propelling their associated cytoskeletal filaments, these biomolecular motors facilitate force generation and material transport in the cells. When extracted, the biomolecular motors are promising candidates for in vitro applications such as biosensor devices, on account of their high operating efficiency and nanoscale size. However, during integration into these devices, some of the motors become defective due to unfavorable adhesion to the substrate surface. These defective motors inhibit the motility of the cytoskeletal filaments which make up the molecular shuttles used in the devices. Difficulties in controlling the fraction of active and defective motors in experiments discourage systematic studies concerning the resilience of the molecular shuttle motility against the impedance of defective motors. Here, we used mathematical modelling to systematically examine the resilience of the propulsion by these molecular shuttles against the impedance of the defective motors. The model showed that the fraction of active motors on the substrate is the essential factor determining the resilience of the molecular shuttle motility. Approximately 40% of active kinesin or 80% of active myosin motors are required to constitute continuous gliding of molecular shuttles in their respective substrates. The simplicity of the mathematical model in describing motility behavior offers utility in elucidating the mechanisms of the motility resilience of molecular shuttles.


  • Open Access

    Linking path and filament persistence lengths of microtubules gliding over kinesin

    by May Sweet, Samuel Macharia Kang’iRi, Takahiro Nitta

    Microtubules and kinesin motor proteins are involved in intracellular transports in living cells. Such intracellular material transport systems can be reconstructed for utilisation in synthetic environments, and they are called molecular shuttles driven by kinesin motors. The performance of the molecular shuttles depends on the nature of their trajectories, which can be characterized by the path persistence length of microtubules. It has been theoretically predicted that the path persistence length should be equal to the filament persistence length of the microtubules, where the filament persistence length is a measure of microtubule flexural stiffness. However, previous experiments have shown that there is a significant discrepancy between the path and filament persistence lengths. Here, we showed how this discrepancy arises by using computer simulation. By simulating molecular shuttle movements under external forces, the discrepancy between the path and filament persistence lengths was reproduced as observed in experiments. Our close investigations of molecular shuttle movements revealed that the part of the microtubules bent due to the external force was extended more than it was assumed in the theory. By considering the extended length, we could elucidate the discrepancy. The insights obtained here are expected to lead to better control of molecular shuttle movements.