Carlos Triveno Rios
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Carlos Triveno Rios has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Claudemiro Bolfarini
Universidade Federal de São Carlos, Brasil
13 shared publications - Claudio Shyinti Kiminami
Universidade Federal de São Carlos, Brasil
13 shared publications - Walter Jose Botta
Department of Materials Engineering (DEMa/UFSCar), Federal University of São Carlos, Rodovia Washington Luiz, km 235, São Carlos CEP: 13565-905, Brazil
13 shared publications - Rubens Caram
Universidade de Campinas, Brasil
4 shared publications - Srdjan Milenkovic
IMDEA Materials Institute
3 shared publications Edson N. Ito
Department of Materials Engineering, Federal University of Rio Grande do Norte Campus universitário s/n, 59078-970, Natal, RN, Brazil
2 shared publications
Latest Publications
- 11 May 2021
- Published by Brazilian Journals
Influência do Tratamento Térmico de Recozimento na Liga Al-Zn-Mg-Cu Envelhecida Artificialmente
A liga comercial de alumínio 7075 (Al-Zn-Mg-Cu) é uma das ligas de alumínio de alta resistência atualmente usado na indústria. A sua elevada relação resistência/peso, juntamente com as suas características de envelhecimento, o torna atrativo para aplicações estruturais e podem ser submetido a temperaturas moderadas durante a aplicação. Conseqüentemente, processos de superenvelhecimento podem conduzir a uma diminuição significativa na resistência do material. Para estudar a mudança na microestrutura e nas propriedades mecânicas durante os tratamentos térmicos de recozimento foi usada uma liga de alumínio 7075 na condição solubilizada e envelhecida artificialmente (T651). Os tratamentos de recozimento em temperaturas de 150 a 350 °C por 8 horas mostraram uma diminuição de ~50%, ~67% e ~54% na resistência à tração, resistência ao escoamento e microdureza Vickers, respectivamente, o que é atribuído à dissolução parcial de partículas intermetálicas grosseiras (Al2CuMg e Al7Cu2Fe) e à transição da fase metaestável para a fase estável (MgZn2), além da dissolução de elementos de liga na matriz de Al-a.
- 11 May 2021
- Published by Brazilian Journals
Influência do Tratamento Térmico de Recozimento na Liga Al-Zn-Mg-Cu Envelhecida Artificialmente
A liga comercial de alumínio 7075 (Al-Zn-Mg-Cu) é uma das ligas de alumínio de alta resistência atualmente usado na indústria. A sua elevada relação resistência/peso, juntamente com as suas características de envelhecimento, o torna atrativo para aplicações estruturais e podem ser submetido a temperaturas moderadas durante a aplicação. Conseqüentemente, processos de superenvelhecimento podem conduzir a uma diminuição significativa na resistência do material. Para estudar a mudança na microestrutura e nas propriedades mecânicas durante os tratamentos térmicos de recozimento foi usada uma liga de alumínio 7075 na condição solubilizada e envelhecida artificialmente (T651). Os tratamentos de recozimento em temperaturas de 150 a 350 °C por 8 horas mostraram uma diminuição de ~50%, ~67% e ~54% na resistência à tração, resistência ao escoamento e microdureza Vickers, respectivamente, o que é atribuído à dissolução parcial de partículas intermetálicas grosseiras (Al2CuMg e Al7Cu2Fe) e à transição da fase metaestável para a fase estável (MgZn2), além da dissolução de elementos de liga na matriz de Al-a.
- 24 November 2019
- Published by Wiley in Surface and Interface Analysis
- Vol. 52 (1-2) , 50-62
Corrosion of Al 85 Ni 9 Ce 6 amorphous alloy in the first hours of immersion in 3.5‐wt% NaCl solution: The role of surface chemistry
The surface chemistry and corrosion behavior of Al 85 Ni 9 Ce 6 melt‐spun ribbons were studied after the first hours of immersion in 3.5‐wt% NaCl solution at room temperature. X‐ray photoelectron spectroscopy (XPS) was used to assess the chemical states of Al, Ce, Ni, and O. Electrochemical impedance spectroscopy was used to assess the corrosion resistance of the Al 85 Ni 9 Ce 6 ribbons. The alloy remained immersed for up to 48 hours. The results showed that hydroxide species in the passive film play a central role in the corrosion behavior of the Al 85 Ni 9 Ce 6 alloy.
- 24 November 2019
- Published by Wiley in Surface and Interface Analysis
- Vol. 52 (1-2) , 50-62
Corrosion of Al 85 Ni 9 Ce 6 amorphous alloy in the first hours of immersion in 3.5‐wt% NaCl solution: The role of surface chemistry
The surface chemistry and corrosion behavior of Al 85 Ni 9 Ce 6 melt‐spun ribbons were studied after the first hours of immersion in 3.5‐wt% NaCl solution at room temperature. X‐ray photoelectron spectroscopy (XPS) was used to assess the chemical states of Al, Ce, Ni, and O. Electrochemical impedance spectroscopy was used to assess the corrosion resistance of the Al 85 Ni 9 Ce 6 ribbons. The alloy remained immersed for up to 48 hours. The results showed that hydroxide species in the passive film play a central role in the corrosion behavior of the Al 85 Ni 9 Ce 6 alloy.
- 1 October 2016
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 682, 412-417
Preparation and characterization of the structure and corrosion behavior of wedge mold cast Fe43.2Co28.8B19.2Si4.8Nb4 bulk amorphous alloy
- 1 October 2016
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 682, 412-417
Preparation and characterization of the structure and corrosion behavior of wedge mold cast Fe43.2Co28.8B19.2Si4.8Nb4 bulk amorphous alloy
- Open Access
- 1 November 2013
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 577, 650-657
Nanoquasicrystalline Al–Fe–Cr–Nb alloys produced by powder metallurgy
- 1 November 2013
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 577, 650-657
Open AccessNanoquasicrystalline Al–Fe–Cr–Nb alloys produced by powder metallurgy
- Open Access
- 30 August 2012
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 15 (5) , 757-762
Stability of an amorphous alloy of the Mm-Al-Ni-Cu system
- 30 August 2012
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 15 (5) , 757-762
Open AccessStability of an amorphous alloy of the Mm-Al-Ni-Cu system
- 1 June 2011
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 691, 23-26
Characterization of Glass Forming Alloy Fe43.2Co28.8B19.2Si4.8Nb4 Processed by Spray Forming and Wedge Mold Casting Techniques
Bulk glassy alloys based on the Fe-Co-B-Si-Nb system have already achieved high levels of mechanical strength. The present work investigated the microstructural evolution of Fe43.2Co28.8B19.2Si4.8Nb4 alloy during the spray forming and wedge mold casting processes, with emphasis on the formation of amorphous phase. The microstructure was evaluated by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). The region outer the spray deposit showed the formation of an amorphous structure with a thickness of ~2.5 mm, while that of the wedge-shaped sample exhibited a thickness of up to ~1.5 mm, suggesting that both processes show a promising potential for the production of bulk glass alloys.
- 1 June 2011
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 691, 23-26
Characterization of Glass Forming Alloy Fe43.2Co28.8B19.2Si4.8Nb4 Processed by Spray Forming and Wedge Mold Casting Techniques
Bulk glassy alloys based on the Fe-Co-B-Si-Nb system have already achieved high levels of mechanical strength. The present work investigated the microstructural evolution of Fe43.2Co28.8B19.2Si4.8Nb4 alloy during the spray forming and wedge mold casting processes, with emphasis on the formation of amorphous phase. The microstructure was evaluated by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). The region outer the spray deposit showed the formation of an amorphous structure with a thickness of ~2.5 mm, while that of the wedge-shaped sample exhibited a thickness of up to ~1.5 mm, suggesting that both processes show a promising potential for the production of bulk glass alloys.
- 2 September 2010
- Published by Wiley in Journal of Polymer Science Part B: Polymer Physics
- Vol. 48 (21) , 2274-2287
Effect of PBT molecular weight and reactive compatibilization on the dispersed‐phase coalescence of PBT/SAN blends
Poly(butylene terephthalate) (PBT)/styrene‐acrylonitrile copolymer (SAN) blends were investigated with respect to their phase morphology. The SAN component was kept as dispersed phase and PBT as matrix phase and the PBT/SAN viscosity ratio was changed by using different PBT molecular weights. PBT/SAN blends were also compatibilized by adding methyl methacrylate‐co‐glycidyl methacrylate‐co‐ethyl acrylate terpolymer, MGE, which is an in situ reactive compatibilizer for melt blending. In noncompatibilized blends, the dispersed phase particle size increased with SAN concentration due to coalescence effects. Static coalescence experiments showed evidence of greater coalescence in blends with higher viscosity ratios. For noncompatibilized PBT/SAN/MGE blends with high molecular weight PBT as matrix phase, the average particle size of SAN phase does not depend on the SAN concentration in the blends. However noncompatibilized blends with low molecular weight PBT showed a significant increase in SAN particle size with the SAN concentration. The effect of MGE epoxy content and MGE molecular weight on the morphology of the PBT/SAN blend was also investigated. As the MGE epoxy content increased, the average particle size of SAN initially decreased with both high and low molecular weight PBT phase, thereafter leveling off with a critical content of epoxy groups in the blend. This critical content was higher in the blends containing low molecular weight PBT than in those with high molecular weight PBT. At a fixed MGE epoxy content, a decrease in MGE molecular weight yielded PBT/SAN blends with dispersed nanoparticles with an average size of about 40 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010
- 2 September 2010
- Published by Wiley in Journal of Polymer Science Part B: Polymer Physics
- Vol. 48 (21) , 2274-2287
Effect of PBT molecular weight and reactive compatibilization on the dispersed‐phase coalescence of PBT/SAN blends
Poly(butylene terephthalate) (PBT)/styrene‐acrylonitrile copolymer (SAN) blends were investigated with respect to their phase morphology. The SAN component was kept as dispersed phase and PBT as matrix phase and the PBT/SAN viscosity ratio was changed by using different PBT molecular weights. PBT/SAN blends were also compatibilized by adding methyl methacrylate‐co‐glycidyl methacrylate‐co‐ethyl acrylate terpolymer, MGE, which is an in situ reactive compatibilizer for melt blending. In noncompatibilized blends, the dispersed phase particle size increased with SAN concentration due to coalescence effects. Static coalescence experiments showed evidence of greater coalescence in blends with higher viscosity ratios. For noncompatibilized PBT/SAN/MGE blends with high molecular weight PBT as matrix phase, the average particle size of SAN phase does not depend on the SAN concentration in the blends. However noncompatibilized blends with low molecular weight PBT showed a significant increase in SAN particle size with the SAN concentration. The effect of MGE epoxy content and MGE molecular weight on the morphology of the PBT/SAN blend was also investigated. As the MGE epoxy content increased, the average particle size of SAN initially decreased with both high and low molecular weight PBT phase, thereafter leveling off with a critical content of epoxy groups in the blend. This critical content was higher in the blends containing low molecular weight PBT than in those with high molecular weight PBT. At a fixed MGE epoxy content, a decrease in MGE molecular weight yielded PBT/SAN blends with dispersed nanoparticles with an average size of about 40 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010
- 28 December 2009
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 495 (2) , 386-390
Microstructure and mechanical properties of Al–Si–Mg ribbons
- 28 December 2009
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 495 (2) , 386-390
Microstructure and mechanical properties of Al–Si–Mg ribbons
- 1 August 2009
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 483 (1-2) , 89-93
Crystallisation behaviours of Al-based metallic glasses: Compositional and topological aspects
- 1 August 2009
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 483 (1-2) , 89-93
Crystallisation behaviours of Al-based metallic glasses: Compositional and topological aspects
- 1 April 2009
- Published by Elsevier in Polymer Testing
- Vol. 28 (2) , 183-187
Interfacial behavior of composites of recycled poly(ethyelene terephthalate) and sugarcane bagasse fiber
- 1 April 2009
- Published by Elsevier in Polymer Testing
- Vol. 28 (2) , 183-187
Interfacial behavior of composites of recycled poly(ethyelene terephthalate) and sugarcane bagasse fiber