Tod A. Grusenmeyer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Tod A. Grusenmeyer has a total of 175 co-authors. Here are the top co-authors by number of shared publications:
- Michael C. Brennan
Air Force Research Laboratory Materials and Manufacturing Directorate Wright‐Patterson Air Force Base Dayton OH 45433 USA
11 shared publications - Lauren M. Loftus
Materials and Manufacturing Directorate, Air Force Research Laboratory, Wright-Patterson Air Force Base, OH 45433, USA
9 shared publications - Christopher L. McCleese
Air Force Research Laboratory Materials and Manufacturing Directorate Wright‐Patterson Air Force Base Dayton OH 45433 USA
8 shared publications Joy E. Haley
Air Force Research Laboratory,Materials and Manufacturing Directorate,Dayton,Ohio,U.S.A.,45433
8 shared publications- Thomas G. Gray
Department of Chemistry, Case Western Reserve University, Cleveland, Ohio 44106, USA
8 shared publications Alexis T. Phillips
Air Force Research Laboratory Materials and Manufacturing Directorate Wright‐Patterson Air Force Base Dayton 45433 Ohio United States
7 shared publications
Latest Publications
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
Use of a synthetic biology pipeline to rapidly generate sesquiterpenes for chemical applications testing
An integrated synthetic biology and fermentation platform enables rapid production of diverse sesquiterpenes for testing in advanced fuel, polymer, and optical material applications.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
Use of a synthetic biology pipeline to rapidly generate sesquiterpenes for chemical applications testing
An integrated synthetic biology and fermentation platform enables rapid production of diverse sesquiterpenes for testing in advanced fuel, polymer, and optical material applications.
- Open Access
- 12 August 2025
- Published by Wiley in Advanced Photonics Research
- Vol. 6 (11)
Photoluminescence of Mechanochemically Manufactured Rare‐Earth Doped CsPbCl 3 Microcrystals
Lanthanide‐activated CsPbX 3 perovskites (Ln 3+ :CsPbCl 3 ) hold immense promise for the development of next‐generation solid‐state lasers. Realizing their full potential hinges on achieving controlled lanthanide concentrations with homogenous distribution throughout the perovskite host—a considerable material processing challenge that hinders widespread application. This work introduces a robust, scalable mechanochemical synthesis for producing both singly doped Ln 3+ :CsPbCl 3 (Ln 3+ = Pr 3+ , Nd 3+ , Ho 3+ , Er 3+ , Yb 3+ ) as well as co‐doped Ln 3+(I) /Ln 3+(II) :CsPbCl 3 (Ln 3+(I) /Ln 3+(II) = Nd 3+ /Yb 3+ , Ho 3+ /Pr 3+ , Er 3+ /Pr 3+ ) microcrystalline powders. Complementary structural characterization techniques (e.g., X‐ray diffraction, X‐ray photoelectron spectroscopy, energy‐dispersive X‐ray spectroscopy, and X‐ray fluorescence) directly quantify doping concentration and confirm homogeneous Ln 3+ distribution throughout the powders. Detailed photoluminescence (PL), PL excitation, and PL lifetime measurements reveal distinct emissive and absorptive states in the visible to short‐wave infrared (IR) stemming from the dopants. Melt‐grown crystals, derived from mechanochemically prepared powders, exhibit enhanced PL lifetimes compared to their source powders and are transparent at IR emission wavelengths. Overall, this mechanochemical approach allows for considerable control over dopant incorporation, yielding powders that are well‐suited for the melt‐growth of rare‐earth‐doped single crystals and the future development of halide perovskite‐based solid‐state lasers.
- 12 August 2025
- Published by Wiley in Advanced Photonics Research
- Vol. 6 (11)
Open AccessPhotoluminescence of Mechanochemically Manufactured Rare‐Earth Doped CsPbCl 3 Microcrystals
Lanthanide‐activated CsPbX 3 perovskites (Ln 3+ :CsPbCl 3 ) hold immense promise for the development of next‐generation solid‐state lasers. Realizing their full potential hinges on achieving controlled lanthanide concentrations with homogenous distribution throughout the perovskite host—a considerable material processing challenge that hinders widespread application. This work introduces a robust, scalable mechanochemical synthesis for producing both singly doped Ln 3+ :CsPbCl 3 (Ln 3+ = Pr 3+ , Nd 3+ , Ho 3+ , Er 3+ , Yb 3+ ) as well as co‐doped Ln 3+(I) /Ln 3+(II) :CsPbCl 3 (Ln 3+(I) /Ln 3+(II) = Nd 3+ /Yb 3+ , Ho 3+ /Pr 3+ , Er 3+ /Pr 3+ ) microcrystalline powders. Complementary structural characterization techniques (e.g., X‐ray diffraction, X‐ray photoelectron spectroscopy, energy‐dispersive X‐ray spectroscopy, and X‐ray fluorescence) directly quantify doping concentration and confirm homogeneous Ln 3+ distribution throughout the powders. Detailed photoluminescence (PL), PL excitation, and PL lifetime measurements reveal distinct emissive and absorptive states in the visible to short‐wave infrared (IR) stemming from the dopants. Melt‐grown crystals, derived from mechanochemically prepared powders, exhibit enhanced PL lifetimes compared to their source powders and are transparent at IR emission wavelengths. Overall, this mechanochemical approach allows for considerable control over dopant incorporation, yielding powders that are well‐suited for the melt‐growth of rare‐earth‐doped single crystals and the future development of halide perovskite‐based solid‐state lasers.
- Open Access
- 12 August 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (36) , 30151-30157
Design of phthalocyanine metal complexes for efficient far-red to near-IR light-initiated photopolymerizations
Efficient near-infrared (NIR) photopolymerization is promising for applications such as hydrogel bioprinting, composite manufacturing, and other technologies that benefit from deep light penetration and low-energy activation. Yet, design principles for optimizing NIR photoinitiators, particularly those based on earth-abundant or metal-free elements, remain limited. Here, a library of phthalocyanine (Pc) and naphthalocyanine (Nc) derivatives was synthesized, characterized, and evaluated as photoredox catalysts for NIR-induced radical polymerizations. Variations in metal center (Zn, Si, Pd), α-substitution (pentyl or butoxy), and π-extension (Pcvs.Nc) enabled tuning of light absorption, excited-state energies and lifetimes, and triplet excited state quantum yields. Polymerization kinetics were quantified using real-time FTIR spectroscopy under LED irradiation (740–940 nm), with photon absorption normalized to allow direct comparison of internal quantum yields. This work provides a framework for quantitative benchmarking of NIR photoinitiators under controlled conditions. Among the catalysts studied, a Pd–Pc complex showed the highest internal efficiency, while a Si–Nc catalyst outperformed a leading commercial cyanine initiator, highlighting the potential of silicon as a sustainable alternative to precious metals. These results establish clear structure–property relationships and offer guiding principles for the design of next-generation NIR photoinitiators suited for biomedical and advanced manufacturing technologies.
- 12 August 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (36) , 30151-30157
Open AccessDesign of phthalocyanine metal complexes for efficient far-red to near-IR light-initiated photopolymerizations
Efficient near-infrared (NIR) photopolymerization is promising for applications such as hydrogel bioprinting, composite manufacturing, and other technologies that benefit from deep light penetration and low-energy activation. Yet, design principles for optimizing NIR photoinitiators, particularly those based on earth-abundant or metal-free elements, remain limited. Here, a library of phthalocyanine (Pc) and naphthalocyanine (Nc) derivatives was synthesized, characterized, and evaluated as photoredox catalysts for NIR-induced radical polymerizations. Variations in metal center (Zn, Si, Pd), α-substitution (pentyl or butoxy), and π-extension (Pcvs.Nc) enabled tuning of light absorption, excited-state energies and lifetimes, and triplet excited state quantum yields. Polymerization kinetics were quantified using real-time FTIR spectroscopy under LED irradiation (740–940 nm), with photon absorption normalized to allow direct comparison of internal quantum yields. This work provides a framework for quantitative benchmarking of NIR photoinitiators under controlled conditions. Among the catalysts studied, a Pd–Pc complex showed the highest internal efficiency, while a Si–Nc catalyst outperformed a leading commercial cyanine initiator, highlighting the potential of silicon as a sustainable alternative to precious metals. These results establish clear structure–property relationships and offer guiding principles for the design of next-generation NIR photoinitiators suited for biomedical and advanced manufacturing technologies.
- Open Access
- 21 July 2025
- Published by Wiley in Advanced Photonics Research
- Vol. 6 (10)
Pressure‐Assisted Ceramic Processing of Metal Halide Perovskites
Increasing demand for metal halide perovskites in applications beyond photovoltaics (e.g., hard radiation detection) necessitates hundreds of microns to millimeters thick active layers for optimal performance. This review critically assesses low‐temperature, pressure‐assisted ceramic processing as a pivotal technique to fabricate dense, polycrystalline wafers with precisely controlled macroscopic dimensions as well as microstructural properties. Exploiting the soft ionic bonding and subsequent plasticity of metal halide perovskites, pressure‐assisted ceramic processing can achieve rapid densification at drastically reduced temperatures (≲100 °C) compared to common oxide ceramics (≳1000 °C). As a direct result, metal halide perovskite ceramics can be manufactured using cost‐effective pressure‐assisted ceramic processing methods (e.g., low‐temperature uniaxial pressing). However, a definitive understanding of the intricate relationship between sintering parameters (temperature, pressure, and powder characteristics) and the resulting microstructural attributes (pore/grain size and distribution, relative density, porosity, and crystallinity) and optoelectronic responses remains a knowledge gap. To metal halide perovskite experts, the aim is to emphasize the considerable advantages of pressure‐assisted ceramic processing, and to expert ceramists, the aim is to demonstrate that metal halide perovskites offer a compelling material class for established ceramic processing techniques. Bridging the knowledge between these two distinct areas of expertise will help drive transformative progress in metal halide perovskite‐based technologies.
- 21 July 2025
- Published by Wiley in Advanced Photonics Research
- Vol. 6 (10)
Open AccessPressure‐Assisted Ceramic Processing of Metal Halide Perovskites
Increasing demand for metal halide perovskites in applications beyond photovoltaics (e.g., hard radiation detection) necessitates hundreds of microns to millimeters thick active layers for optimal performance. This review critically assesses low‐temperature, pressure‐assisted ceramic processing as a pivotal technique to fabricate dense, polycrystalline wafers with precisely controlled macroscopic dimensions as well as microstructural properties. Exploiting the soft ionic bonding and subsequent plasticity of metal halide perovskites, pressure‐assisted ceramic processing can achieve rapid densification at drastically reduced temperatures (≲100 °C) compared to common oxide ceramics (≳1000 °C). As a direct result, metal halide perovskite ceramics can be manufactured using cost‐effective pressure‐assisted ceramic processing methods (e.g., low‐temperature uniaxial pressing). However, a definitive understanding of the intricate relationship between sintering parameters (temperature, pressure, and powder characteristics) and the resulting microstructural attributes (pore/grain size and distribution, relative density, porosity, and crystallinity) and optoelectronic responses remains a knowledge gap. To metal halide perovskite experts, the aim is to emphasize the considerable advantages of pressure‐assisted ceramic processing, and to expert ceramists, the aim is to demonstrate that metal halide perovskites offer a compelling material class for established ceramic processing techniques. Bridging the knowledge between these two distinct areas of expertise will help drive transformative progress in metal halide perovskite‐based technologies.
- 16 July 2025
- Published by Wiley in Chemphyschem
- Vol. 26 (17) , e202401105
The Observation of Solvent Dependent 3Intraligand and 3Ligand‐to‐Ligand Charge Transfer Excited States in Au(III) Chromophores Containing Fluorene‐Diphenyl Amine Ligands
The arylgold(III) complex Au(III)‐DPA and its alkynyl analog Au(III)‐ADPA are synthesized and characterized using steady‐state and time‐resolved optical spectroscopy and density functional theory calculations. Both complexes embed the fluorenyl moiety with substitution at the 2,7‐positions, and both carry diphenylamine (DPA) substituents. The photophysical properties of the molecules are examined in toluene and tetrahydrofuran (THF) solutions. Both complexes possess similar ground‐state absorption spectra, which are a combination of ligand centered π‐π* transitions and metal‐perturbed π‐π* transitions. The excited‐state luminescent properties of the molecules are solvent dependent. In toluene, Au(III)‐DPA displays featureless phosphorescence, and Au(III)‐ADPA exhibits structured phosphorescence both ascribed to a metal‐perturbed triplet intraligand (3IL) π‐π* state. In THF, however, both Au(III)‐DPA and Au(III)‐ADPA exhibit broad, red‐shifted phosphorescence indicative of a solvent stabilized triplet ligand‐to‐ligand charge transfer (3LLCT) state. The intersystem crossing efficiencies of both complexes are also investigated. Pulsed laser experiments reveal high intersystem crossing values (>0.79) for both complexes in both solvents, indicating that intersystem crossing is the dominant pathway for singlet excited‐state decay. Density functional theory calculations indicate frontier orbitals centered on the substituted fluorenyl ligands highest occupied molecular orbital (HOMO) and the cyclometalating ligand lowest unoccupied molecular orbital (LUMO), supporting the assignment of 3LLCT excited states in more polar solvents.
- 16 July 2025
- Published by Wiley in Chemphyschem
- Vol. 26 (17) , e202401105
The Observation of Solvent Dependent 3Intraligand and 3Ligand‐to‐Ligand Charge Transfer Excited States in Au(III) Chromophores Containing Fluorene‐Diphenyl Amine Ligands
The arylgold(III) complex Au(III)‐DPA and its alkynyl analog Au(III)‐ADPA are synthesized and characterized using steady‐state and time‐resolved optical spectroscopy and density functional theory calculations. Both complexes embed the fluorenyl moiety with substitution at the 2,7‐positions, and both carry diphenylamine (DPA) substituents. The photophysical properties of the molecules are examined in toluene and tetrahydrofuran (THF) solutions. Both complexes possess similar ground‐state absorption spectra, which are a combination of ligand centered π‐π* transitions and metal‐perturbed π‐π* transitions. The excited‐state luminescent properties of the molecules are solvent dependent. In toluene, Au(III)‐DPA displays featureless phosphorescence, and Au(III)‐ADPA exhibits structured phosphorescence both ascribed to a metal‐perturbed triplet intraligand (3IL) π‐π* state. In THF, however, both Au(III)‐DPA and Au(III)‐ADPA exhibit broad, red‐shifted phosphorescence indicative of a solvent stabilized triplet ligand‐to‐ligand charge transfer (3LLCT) state. The intersystem crossing efficiencies of both complexes are also investigated. Pulsed laser experiments reveal high intersystem crossing values (>0.79) for both complexes in both solvents, indicating that intersystem crossing is the dominant pathway for singlet excited‐state decay. Density functional theory calculations indicate frontier orbitals centered on the substituted fluorenyl ligands highest occupied molecular orbital (HOMO) and the cyclometalating ligand lowest unoccupied molecular orbital (LUMO), supporting the assignment of 3LLCT excited states in more polar solvents.
- 5 February 2025
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 114 (1) , 223-234
Formulation-dependent optical properties of hybrid sol-gel glasses containing diphenylamine–fluorene–benzothiazole dyes
- 5 February 2025
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 114 (1) , 223-234
Formulation-dependent optical properties of hybrid sol-gel glasses containing diphenylamine–fluorene–benzothiazole dyes
- 11 October 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 128 (42) , 9146-9158
Electronic Structures and Spectra of Donor–Acceptor Conjugated Oligomers
Narrow band gap donor-acceptor conjugated polymers present excellent paradigms in photonics and optoelectronics due to their chemical tunability, correlated electronic structures, and tunable open-shell electronic configurations. However, rational design for enhancing the properties of these molecular systems remains challenging. In this study, we employed density functional theory (DFT) calculations to investigate prototypical narrow band gap donor-acceptor conjugated oligomers, consisting of alternating cyclopentadithiophene (CPDT) donors paired with benzothiadiazole (BT), benzoselenadiazole (BSe), benzobisthiadiazole (BBT), and thiadiazoloquinoxaline (TQ) acceptors. Analyses of structures, singlet-triplet gaps, and absorption spectra of oligomers with up to ten repeat units have shown that when incorporating the BT, BSe, and TQ acceptors, the backbone curvature resulted in spiral structures that were energetically favored over their linear counterparts, causing differences in the calculated circular dichroism spectra. Oligomers with BBT-based acceptors preferred, however, a linear geometry, consistent with an open-shell electronic structure. Calculated singlet-triplet splittings demonstrated the importance of long chains and specific structures for consistency with the experiment, while effects of the solvent were also quantified. Based on the predicted low-energy conformations, one-photon absorption spectra for the considered oligomers have shown that using the Tamm-Dancoff approximation within time-dependent DFT for the large systems offers good agreement with the first absorption maxima in measured experimental spectra, thus validating the method for large donor-acceptor oligomers. Natural transition orbital analyses provided insights into the excited-state characteristics. Two-photon absorption maxima were accurately predicted, but the cross-sections were overestimated or underestimated, as dependent on the level of theory employed, to be addressed in future work.
- 11 October 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 128 (42) , 9146-9158
Electronic Structures and Spectra of Donor–Acceptor Conjugated Oligomers
Narrow band gap donor-acceptor conjugated polymers present excellent paradigms in photonics and optoelectronics due to their chemical tunability, correlated electronic structures, and tunable open-shell electronic configurations. However, rational design for enhancing the properties of these molecular systems remains challenging. In this study, we employed density functional theory (DFT) calculations to investigate prototypical narrow band gap donor-acceptor conjugated oligomers, consisting of alternating cyclopentadithiophene (CPDT) donors paired with benzothiadiazole (BT), benzoselenadiazole (BSe), benzobisthiadiazole (BBT), and thiadiazoloquinoxaline (TQ) acceptors. Analyses of structures, singlet-triplet gaps, and absorption spectra of oligomers with up to ten repeat units have shown that when incorporating the BT, BSe, and TQ acceptors, the backbone curvature resulted in spiral structures that were energetically favored over their linear counterparts, causing differences in the calculated circular dichroism spectra. Oligomers with BBT-based acceptors preferred, however, a linear geometry, consistent with an open-shell electronic structure. Calculated singlet-triplet splittings demonstrated the importance of long chains and specific structures for consistency with the experiment, while effects of the solvent were also quantified. Based on the predicted low-energy conformations, one-photon absorption spectra for the considered oligomers have shown that using the Tamm-Dancoff approximation within time-dependent DFT for the large systems offers good agreement with the first absorption maxima in measured experimental spectra, thus validating the method for large donor-acceptor oligomers. Natural transition orbital analyses provided insights into the excited-state characteristics. Two-photon absorption maxima were accurately predicted, but the cross-sections were overestimated or underestimated, as dependent on the level of theory employed, to be addressed in future work.
- 22 July 2024
- Published by Springer Nature in MRS Communications
- Vol. 14 (5) , 935-941
Liquid monomer phase exfoliation of non-van der Waals hematite and processing of poly(methyl methacrylate) hematene composite substrates
- 22 July 2024
- Published by Springer Nature in MRS Communications
- Vol. 14 (5) , 935-941
Liquid monomer phase exfoliation of non-van der Waals hematite and processing of poly(methyl methacrylate) hematene composite substrates
- Open Access
- 24 June 2024
- Published by Royal Society of Chemistry (RSC) in RSC Applied Polymers
- Vol. 2 (5) , 857-869
Polymer macroligands passivate halide perovskite surfaces
Polymers with nitrogen-containing groups act as polymer macroligands that will preferentially bind to and passivate perovskite surface, resulting in enhanced optical properties.
- 24 June 2024
- Published by Royal Society of Chemistry (RSC) in RSC Applied Polymers
- Vol. 2 (5) , 857-869
Open AccessPolymer macroligands passivate halide perovskite surfaces
Polymers with nitrogen-containing groups act as polymer macroligands that will preferentially bind to and passivate perovskite surface, resulting in enhanced optical properties.
- Open Access
- 6 June 2024
- Published by Springer Nature in MRS Communications
- Vol. 14 (5) , 900-908
Fundamental optical constants and anti-reflection coating of melt-grown, polished CsPbBr3 crystals
Lead halide perovskites are notorious for water-sensitivity and low hardness. Consequently, polishing CsPbBr3 crystals to achieve high-quality surfaces is challenging. We present a breakthrough mechanical polishing methodology tailored to the specific needs of these soft, moisture-sensitive semiconductors. Three-dimensional optical surface profiles over ~ 1 mm2 areas demonstrate high-quality surfaces with root-mean-square roughness values (< 10 nm) that are unparalleled for melt-grown CsPbBr3. We additionally delve into the polished wafers’ fundamental optical constants and introduce an anti-reflection coating method, setting new standards for short-wave infrared transparency in CsPbBr3. These pivotal processing guidelines pave the way for advancing halide perovskite applications beyond academic curiosity. Graphical abstract
- 6 June 2024
- Published by Springer Nature in MRS Communications
- Vol. 14 (5) , 900-908
Open AccessFundamental optical constants and anti-reflection coating of melt-grown, polished CsPbBr3 crystals
Lead halide perovskites are notorious for water-sensitivity and low hardness. Consequently, polishing CsPbBr3 crystals to achieve high-quality surfaces is challenging. We present a breakthrough mechanical polishing methodology tailored to the specific needs of these soft, moisture-sensitive semiconductors. Three-dimensional optical surface profiles over ~ 1 mm2 areas demonstrate high-quality surfaces with root-mean-square roughness values (< 10 nm) that are unparalleled for melt-grown CsPbBr3. We additionally delve into the polished wafers’ fundamental optical constants and introduce an anti-reflection coating method, setting new standards for short-wave infrared transparency in CsPbBr3. These pivotal processing guidelines pave the way for advancing halide perovskite applications beyond academic curiosity. Graphical abstract