HHHauke Herrnring

Hauke Herrnring

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hauke Herrnring has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Simulation of a two-dimensional ice crushing processes with the Mohr-Coulomb nodal split model

    by Hauke Herrnring, Moritz Braun

    Level ice poses a significant risk for ships, offshore-, and civil structures. Crushing loads are a relevant load case for different ice-structure interaction scenarios. In this paper, the new Mohr-Coulomb Nodal Split (MCNS) ice model is used for the first time to simulate two-dimensional brittle crushing loads for unconstrained and floating level ice conditions. The results of the presented feasibility study are in good qualitative agreement with previous experimental and numerical studies of various authors. Effects such as spatial variation of High Pressure Zones are accurately represented in the numerical MCNS model. The maximum achievable nominal contact pressures in the case of an ideal contact are in the range of the compression strength of the material model used. Whereas during the crushing process, a maximum of 40% of the compression strength is reached.

  • Open Access

    Data from uniaxial compressive testing of laboratory-made granular ice

    by Angelo Mario Böhm, Hauke Herrnring, Franz von Bock Und Polach


  • Open Access

    A comprehensive approach to scenario-based risk management for Arctic waters

    by Martin Bergström, Thomas Browne, Sören Ehlers, Inari Helle, Hauke Herrnring, Faisal Khan, Jan Kubiczek, Pentti Kujala, Mihkel Kõrgesaar, Bernt Johan Leira, et al.

    While society benefits from Arctic shipping, it is necessary to recognize that ship operations in Arctic waters pose significant risks to people, the environment, and property. To support the management of those risks, this article presents a comprehensive approach addressing both short-term operational risks, as well as risks related to long-term extreme ice loads. For the management of short-term operational risks, an extended version of the Polar Operational Limit Assessment Risk Indexing System (POLARIS) considering the magnitude of the consequences of potential adverse events is proposed. For the management of risks related to long-term extreme ice loads, guidelines are provided for using existing analytical, numerical, and semi-empirical methods. In addition, to support the design of ice class ship structures, the article proposes a novel approach that can be used in the conceptual design phase for the determination of preliminary scantlings for primary hull structural members.


  • Influence of corrosion pit geometry on stress distribution within a single artificial pit

    by Firman A. Nugroho, Hauke Herrnring, Sören Ehlers

    A lower pitting severity produces a shallower corrosion pit shape on a corroded ballast tank. Pit distributions of corroded specimens have a probability model for the non-Gaussian surface. Therefore, the present work focuses on the numerical study of stress distribution within the corrosion pit area, while considering different corrosion pit geometries. Accordingly, 45 dog bone-shaped finite element models with a single corrosion pit are investigated. The geometrical parameters of the corrosion pit are analyzed with quantitative correlations at different sizes, shapes, and different levels of enlargement. Additionally, a corrosion pit alteration scenario is proposed, with a narrow deep, hemispherical, and final shallow wide form. Results show that the stress concentration factor remains relatively constant at the pit edge and increases toward the pit bottom. Furthermore, stress declines on the pit bottom and shallower corrosion pit form, which conforms to the polynomial trendline.


  • Open Access

    Combining H-Adaptivity with the Element Splitting Method for Crack Simulation in Large Structures

    by Shi Song, Moritz Braun, Bjarne Wiegard, Hauke Herrnring, Sören Ehlers

    H-adaptivity is an effective tool to introduce local mesh refinement in the FEM-based numerical simulation of crack propagation. The implementation of h-adaptivity could benefit the numerical simulation of fatigue or accidental load scenarios involving large structures, such as ship hulls. Meanwhile, in engineering applications, the element deletion method is frequently used to represent cracks. However, the element deletion method has some drawbacks, such as strong mesh dependency and loss of mass or energy. In order to mitigate this problem, the element splitting method could be applied. In this study, a numerical method called ‘h-adaptive element splitting’ (h-AES) is introduced. The h-AES method is applied in FEM programs by combining h-adaptivity with the element splitting method. Two examples using the h-AES method to simulate cracks in large structures under linear-elastic fracture mechanics scenario are presented. The numerical results are verified against analytical solutions. Based on the examples, the h-AES method is proven to be able to introduce mesh refinement in large-scale numerical models that mostly consist of structured coarse meshes, which is also beneficial to the reduction of computational resources. By employing the h-AES method, very small cracks are well represented in large structures without any deletions of elements.


  • A Finite Element Model for Compressive Ice Loads Based on a Mohr-Coulomb Material and the Node Splitting Technique

    by Hauke Herrnring, Sören Ehlers

    This paper presents a finite element model for the simulation of ice–structure interaction problems, which are dominated by crushing. The failure mode of ice depends significantly on the strain rate. At low strain rates, the ice behaves ductile, whereas at high strain rates it reacts in brittle mode. This paper focuses on the brittle mode, which is the dominating mode for ship–ice interactions. A multitude of numerical approaches for the simulation of ice can be found in the literature. Nevertheless, the literature approaches do not seem suitable for the simulation of continuous ice–structure interaction processes at low and high confinement ratios in brittle mode. Therefore, this paper seeks to simulate the ice–structure interaction with the finite element method (FEM). The objective of the here introduced Mohr-Coulomb Nodal Split (MCNS) model is to represent the essential material behavior of ice in an efficient formulation. To preserve mass and energy as much as possible, the node splitting technique is applied, instead of the frequently used element erosion technique. The intention of the presented model is not to reproduce individual cracks with high accuracy, because this is not possible with a reasonable element size, due to the large number of crack fronts forming during the ice–structure interaction process. To validate the findings of the model, the simulated maximum ice forces and contact pressures are compared with ice extrusion and double pendulum tests. During validation, the MCNS model shows a very good agreement with these experimental values.


  • The measurement accuracy of instrumented ship structures under local ice loads using strain gauges

    by Angelo Mario Böhm, Rüdiger Ulrich Franz von Bock Und Polach, Hauke Herrnring, Sören Ehlers


  • Development of a design load patch for the consideration of ice loads

    by Jan M. Kubiczek, Gyde Andresen-Paulsen, Hauke Herrnring, Franz von Bock Und Polach, Sören Ehlers

    Ships operating in ice-covered waters may experience structural damage due to ice-induced loads. This can occur even though the ship structure is designed according to rules considering ice loading. The basis of these design rules can be empirical, e.g. measured loads from full-scale trials and observed damages or energy based, which is known as the Popov Method. The rules propose to apply the design ice load as a uniformly loaded rectangular pressure patch. This simplification is, however, not in line with spatial variations of local ice loads and does not account for high pressure zones directly. Therefore, this paper proposes a method for identifying a representative ice load distribution under consideration of local pressure maxima based on a spatial and temporal varying ice load sequence. This identified load is applied to an example structure and the response is compared to the response using a current rule-based patch load. .


  • The ice extrusion test: a novel test setup for the investigation of ice-structure interaction – results and validation

    by Hauke Herrnring, Jan M. Kubiczek, Sören Ehlers

    Understanding ice-structure interaction is critical for an efficient and safe design of offshore structures and ships in ice-covered waters. During the last decades a variety of field experiments, full-scale measurements on ships and laboratory tests have been conducted. Within this paper, a novel experimental setup of the ice extrusion test for the investigation crushing loads is proposed. Due to the flexible design of the experiment brittle and ductile ice loads can be investigated in the laboratory at different load levels. A comprehensive test series with more than 350 tests has been carried out to investigate the system behaviour. The failure mode of the ice is mostly determined by the test speed. The ratio of gap height and sample diameter is the most important parameter for the load level. A validation against full-scale data showed that with this experimental setup it is possible to generate relevant nominal local ice pressures.


  • Establishing a common database of ice experiments and using machine learning to understand and predict ice behavior

    by Leon Kellner, Merten Stender, Rüdiger U. Franz von Bock Und Polach, Hauke Herrnring, Sören Ehlers, Norbert Hoffmann, Knut V. Høyland