Nitai Drimer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nitai Drimer has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Gil Wang
Costal and Marine Engineering Research Institute (CAMERI)
3 shared publications - Roy Gafter
Delft University of Technology
3 shared publications - Daniel Bar
The Interdisciplinary Program for Marine Engineering, The Technion—Israel Institute of Technology, Haifa 3200003, Israel
2 shared publications - Adi Tal
Faculty of Mechanical Engineering, The Technion-Israel Institute of Technology, Haifa 32000, Israel
1 shared publication - Amitai Peleg
Inertia Innovative Design, Haifa 35470, Israel
1 shared publication - Andrey Zavadsky
School of Mechanical Engineering, Tel Aviv University, Tel Aviv 6997801, Israel
1 shared publication
Latest Publications
- 7 August 2026
- Published by Taylor & Francis in The Design Journal
- p. 1-27
Design thinking and innovative design tools for seaweed cultivation: Introducing the culture pod
1. Global food systems face interconnected terrestrial and marine challenges. Ocean biodiversity has declined due to overfishing and coastal expansion (McCauley et al. 2015), while phosphorus and n...
- 7 August 2026
- Published by Taylor & Francis in The Design Journal
- p. 1-27
Design thinking and innovative design tools for seaweed cultivation: Introducing the culture pod
1. Global food systems face interconnected terrestrial and marine challenges. Ocean biodiversity has declined due to overfishing and coastal expansion (McCauley et al. 2015), while phosphorus and n...
- 2 August 2026
- Published by Springer Nature
- p. 109-124
Benchmark Study on the Motion Response and Connectors Load in a Modular Floating Structure: An Ongoing Numerical Investigation
- 2 August 2026
- Published by Springer Nature
- p. 109-124
Benchmark Study on the Motion Response and Connectors Load in a Modular Floating Structure: An Ongoing Numerical Investigation
- Open Access
- 7 May 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (10) , 870
SWAN–WEC: Introducing an Innovative Design for a Deep Water Point Absorber Wave Energy Converter
Meeting the growing demand for renewable energy production requires tapping into a variety of natural resources. Wave energy, while abundant, remains a challenging and often non-economic field. To address this, the present paper proposes and examines an innovative concept for a wave energy converter (WEC). Alongside survivability capabilities, the novel device enables simultaneous extraction of wave energy in two degrees of freedom and, with additional tuning for a range of sea states, achieves higher efficiency compared to existing technologies. As it does not require a link to the seabed or a wharf for production, the concept is suitable for deep water, hence offering higher potential relative to nearshore WECs. In this study, we present the proposed concept and its engineering simplicity, together with mathematical analysis and preliminary results that evaluate the device’s performance under regular and irregular sea conditions.
- 7 May 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (10) , 870
Open AccessSWAN–WEC: Introducing an Innovative Design for a Deep Water Point Absorber Wave Energy Converter
Meeting the growing demand for renewable energy production requires tapping into a variety of natural resources. Wave energy, while abundant, remains a challenging and often non-economic field. To address this, the present paper proposes and examines an innovative concept for a wave energy converter (WEC). Alongside survivability capabilities, the novel device enables simultaneous extraction of wave energy in two degrees of freedom and, with additional tuning for a range of sea states, achieves higher efficiency compared to existing technologies. As it does not require a link to the seabed or a wharf for production, the concept is suitable for deep water, hence offering higher potential relative to nearshore WECs. In this study, we present the proposed concept and its engineering simplicity, together with mathematical analysis and preliminary results that evaluate the device’s performance under regular and irregular sea conditions.
- Open Access
- 8 February 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (4) , 329
A New Concept for Docking Vessels
Docking vessels are used to transport and launch landing crafts, for launching offshore platforms, and in other marine operations. This research develops a new concept for docking vessels, with the aim of optimizing landing operations. Our idea involves separating the functions of transit and landing into two different vessels, where the transporter is the docking vessel of the lander. This generates an efficient concept, as efficient transportation craft and efficient landing craft have different properties to fulfil their functional requirements. The separation enables the design of each vessel with appropriate performance in areas such as cruising speed, range and seakeeping. These functional specifications affect the whole naval architecture of the vessels. This concept is applicable for shores with no harbor facilities, where landing may be necessary for supply or survey. The transporter provides a floating base to the landing craft, with advanced cruising performance, while the lander design has optimal features for shallow water maneuvering and for landing. The docking vessel is of a Semi-SWATH (Small Water-Plane Area Twin Hull) type. A critical aspect of the design concept is the feasibility of launching and docking operations. This research develops this new concept for docking vessels and applies hydrodynamic response analysis to the transporter’s interaction with the lander, for several operational sea states. The method used for the hydrodynamic analysis involves modeling the vessels and solving the wave–body problem for the two interacting vessels, in the frequency domain as well as in the time domain. The time domain analysis enables us to determine the motion of the vessels in real sea spectra, including the representation of the nonlinear response of fenders between the vessels. We apply the AQWA software 2021 developed by ANSYS. The results validate the suitability of this docking application up to a significant wave height of 1.5 m, which present a margin of 0.1 m above the upper limit of sea state 3: 1.4 m. This shows the feasibility of conducting launching and docking operations using this unique design; there is a significant possibility of using this technique to achieve fast and comfortable transportation to a natural shore with no terminal facilities.
- 8 February 2026
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 14 (4) , 329
Open AccessA New Concept for Docking Vessels
Docking vessels are used to transport and launch landing crafts, for launching offshore platforms, and in other marine operations. This research develops a new concept for docking vessels, with the aim of optimizing landing operations. Our idea involves separating the functions of transit and landing into two different vessels, where the transporter is the docking vessel of the lander. This generates an efficient concept, as efficient transportation craft and efficient landing craft have different properties to fulfil their functional requirements. The separation enables the design of each vessel with appropriate performance in areas such as cruising speed, range and seakeeping. These functional specifications affect the whole naval architecture of the vessels. This concept is applicable for shores with no harbor facilities, where landing may be necessary for supply or survey. The transporter provides a floating base to the landing craft, with advanced cruising performance, while the lander design has optimal features for shallow water maneuvering and for landing. The docking vessel is of a Semi-SWATH (Small Water-Plane Area Twin Hull) type. A critical aspect of the design concept is the feasibility of launching and docking operations. This research develops this new concept for docking vessels and applies hydrodynamic response analysis to the transporter’s interaction with the lander, for several operational sea states. The method used for the hydrodynamic analysis involves modeling the vessels and solving the wave–body problem for the two interacting vessels, in the frequency domain as well as in the time domain. The time domain analysis enables us to determine the motion of the vessels in real sea spectra, including the representation of the nonlinear response of fenders between the vessels. We apply the AQWA software 2021 developed by ANSYS. The results validate the suitability of this docking application up to a significant wave height of 1.5 m, which present a margin of 0.1 m above the upper limit of sea state 3: 1.4 m. This shows the feasibility of conducting launching and docking operations using this unique design; there is a significant possibility of using this technique to achieve fast and comfortable transportation to a natural shore with no terminal facilities.
- Open Access
- 22 August 2025
- Published by Elsevier in Journal of Cleaner Production
- Vol. 523
A pure ceramic 3D printed artificial reef — stability and response
- 22 August 2025
- Published by Elsevier in Journal of Cleaner Production
- Vol. 523
Open AccessA pure ceramic 3D printed artificial reef — stability and response
- Open Access
- 2 March 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (3) , 538
The Hydrostatic Buckling of SPM Systems of Fish Cages and a Design Method to Prevent It
This study presents an inherent buckling issue of SPM (Single Point Mooring) systems for open sea aquaculture and a design method to analyze and solve this issue. The SPM arrangement of a row of cages is very efficient, as it minimizes the anchoring load by masking of the current applied to the downstream cages, hence saves anchors and mooring lines. However, a sudden reversal of the current direction presents a risk of buckling of the row of cages, if it applies a compression load along the array of cages before rotation of the entire cage system takes place. This study presents the concept of Hydrostatic Buckling of a row of cages and a method of design and analysis to control the stability of the system at the situation of sudden current reversal. First, a simple method for preliminarily assessment by applying the principle of virtual work is formulated. Then, an analysis of the structure by a parametric finite elements code is presented. The reversal current limits for the stability of the structure, are parametrically studied, by the analyses of two hypothetical practical scenarios. This study presents practical design tools and results, such as the method of the analysis, simplified loading states for representing the critical events, the scantlings of the structure, as well as guidelines for designing a SPM system of cages that withstand critical situations of reversal current.
- 2 March 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (3) , 538
Open AccessThe Hydrostatic Buckling of SPM Systems of Fish Cages and a Design Method to Prevent It
This study presents an inherent buckling issue of SPM (Single Point Mooring) systems for open sea aquaculture and a design method to analyze and solve this issue. The SPM arrangement of a row of cages is very efficient, as it minimizes the anchoring load by masking of the current applied to the downstream cages, hence saves anchors and mooring lines. However, a sudden reversal of the current direction presents a risk of buckling of the row of cages, if it applies a compression load along the array of cages before rotation of the entire cage system takes place. This study presents the concept of Hydrostatic Buckling of a row of cages and a method of design and analysis to control the stability of the system at the situation of sudden current reversal. First, a simple method for preliminarily assessment by applying the principle of virtual work is formulated. Then, an analysis of the structure by a parametric finite elements code is presented. The reversal current limits for the stability of the structure, are parametrically studied, by the analyses of two hypothetical practical scenarios. This study presents practical design tools and results, such as the method of the analysis, simplified loading states for representing the critical events, the scantlings of the structure, as well as guidelines for designing a SPM system of cages that withstand critical situations of reversal current.
- Open Access
- 17 January 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (2) , 236
Preliminary Design Tools for Hydrodynamic Aspects of Submerged Impermeable Breakwaters
The boundary element method (BEM) with Lagrangian formulation is a conceptually simple and efficient method for the simulation of nonlinear wave shoaling, with or without impermeable coastal structures, up to the wave breaking. However, in post-breaking flows, the domain is no longer simply connected, and the BEM is not efficient for the generation of a new free surface. Volumes of fluid (VOF) methods are made to track the fluid-free surfaces after breaking, but they are more numerically complex and less efficient relative to the BEM before breaking. This study presents a numerical model, named BELWF—boundary elements Lagrangian wave flume—for the mathematical simulation of two-dimensional wave flumes. The BELWF can simulate the hydrodynamics of wave shoaling over a coast profile, with submerged impermeable coastal structures of any geometry. The developed model is applied to simulate and study Geotube structures. The BELWF is validated by comparisons with OpenFOAM simulations. Both the BELWF and OpenFOAM simulations show that the most critical state, regarding the sliding stability of the Geotube, occurs, typically just before breaking, where the BELWF reasonably assesses the wave loads and the sliding stability. Hence, the BELWF is a valid and efficient method for the preliminary design of impermeable coastal structures. Finally, the BELWF is applied to simulate a practical design example of a complete shoaling process along a sloped shore with a Geotube structure at the shallow water, which develops a plunging breaker. The simulation well captures the critical event considering the sliding stability of the structure.
- 17 January 2023
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (2) , 236
Open AccessPreliminary Design Tools for Hydrodynamic Aspects of Submerged Impermeable Breakwaters
The boundary element method (BEM) with Lagrangian formulation is a conceptually simple and efficient method for the simulation of nonlinear wave shoaling, with or without impermeable coastal structures, up to the wave breaking. However, in post-breaking flows, the domain is no longer simply connected, and the BEM is not efficient for the generation of a new free surface. Volumes of fluid (VOF) methods are made to track the fluid-free surfaces after breaking, but they are more numerically complex and less efficient relative to the BEM before breaking. This study presents a numerical model, named BELWF—boundary elements Lagrangian wave flume—for the mathematical simulation of two-dimensional wave flumes. The BELWF can simulate the hydrodynamics of wave shoaling over a coast profile, with submerged impermeable coastal structures of any geometry. The developed model is applied to simulate and study Geotube structures. The BELWF is validated by comparisons with OpenFOAM simulations. Both the BELWF and OpenFOAM simulations show that the most critical state, regarding the sliding stability of the Geotube, occurs, typically just before breaking, where the BELWF reasonably assesses the wave loads and the sliding stability. Hence, the BELWF is a valid and efficient method for the preliminary design of impermeable coastal structures. Finally, the BELWF is applied to simulate a practical design example of a complete shoaling process along a sloped shore with a Geotube structure at the shallow water, which develops a plunging breaker. The simulation well captures the critical event considering the sliding stability of the structure.
- Open Access
- 7 March 2022
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 10 (3) , 382
Nonlinear Hydrodynamic Analysis of Ships Moored in a VLFS Service Basin in the East Mediterranean Sea
Very large floating structure (VLFS) is an environmentally sensitive technology which creates artificial land at sea. Designated for the open sea, the Delta is a new type of VLFS. Formed, inherently, by the innovative geometry, the sheltered basin is a unique feature of the Delta. Its year-round operability as the gateway of the structure directly affects the Delta’s utilization. This study examines the basin in terms of its operability as a service port. Relying on potential flow theory and applying the boundary element method, we conducted a nonlinear hydrodynamic analysis of a moored vessel at the basin. It consists of a time-domain simulation of a tanker, berthed via nonlinear mooring system along the Delta’s side hull under severe wave conditions typical to the East Mediterranean Sea. The system is evaluated in terms of acceptable motion of the ship and permissible load on the mooring system. The favorable results indicate that the basin enables most cargo handling operations under waves conditions of , and minimal downtime of less than 6% of the year. In this paper we present the analysis procedure, the evaluation criteria, and the mooring system’s design. The study results and their significance are presented and discussed as well.- 7 March 2022
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 10 (3) , 382
Open AccessNonlinear Hydrodynamic Analysis of Ships Moored in a VLFS Service Basin in the East Mediterranean Sea
Very large floating structure (VLFS) is an environmentally sensitive technology which creates artificial land at sea. Designated for the open sea, the Delta is a new type of VLFS. Formed, inherently, by the innovative geometry, the sheltered basin is a unique feature of the Delta. Its year-round operability as the gateway of the structure directly affects the Delta’s utilization. This study examines the basin in terms of its operability as a service port. Relying on potential flow theory and applying the boundary element method, we conducted a nonlinear hydrodynamic analysis of a moored vessel at the basin. It consists of a time-domain simulation of a tanker, berthed via nonlinear mooring system along the Delta’s side hull under severe wave conditions typical to the East Mediterranean Sea. The system is evaluated in terms of acceptable motion of the ship and permissible load on the mooring system. The favorable results indicate that the basin enables most cargo handling operations under waves conditions of , and minimal downtime of less than 6% of the year. In this paper we present the analysis procedure, the evaluation criteria, and the mooring system’s design. The study results and their significance are presented and discussed as well. - Open Access
- 18 September 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (9) , 1026
A Design Method to Assess the Primary Strength of the Delta-Type VLFS
Very large floating structure (VLFS) is a sustainable concept centered around creating solid platforms at sea. The Delta is a new type of VLFS, designed to withstand open-sea conditions and to form, in addition to a broad deck areas, a sheltered basin of year-round operability. The design of this unique hull relies on direct calculations in order to identify critical load cases and assess their load effects. This study formulates a theoretical procedure for the initial assessment of the primary strength. The procedure analytically integrates the floatation loads while the hull rests at hydrostatic equilibrium on a wave surface and obtains the vertical and horizontal bending moment. This preliminary assessment tool enables a fast review of many load cases and provides the basic insights necessary for a reasonable initial design. Using the procedure, we conducted a primary load assessment for the design of Delta. By calculating the load response to 588 load cases, we identified the critical load scenario and the maximal axial stress. As the stress was too high, we improved the geometry in order to reduce loads and assessed proper scantlings for the critical section. We present the formulation of the procedure, the validation of the results, and the implementation for the structural design of the Delta VLFS.
- 18 September 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (9) , 1026
Open AccessA Design Method to Assess the Primary Strength of the Delta-Type VLFS
Very large floating structure (VLFS) is a sustainable concept centered around creating solid platforms at sea. The Delta is a new type of VLFS, designed to withstand open-sea conditions and to form, in addition to a broad deck areas, a sheltered basin of year-round operability. The design of this unique hull relies on direct calculations in order to identify critical load cases and assess their load effects. This study formulates a theoretical procedure for the initial assessment of the primary strength. The procedure analytically integrates the floatation loads while the hull rests at hydrostatic equilibrium on a wave surface and obtains the vertical and horizontal bending moment. This preliminary assessment tool enables a fast review of many load cases and provides the basic insights necessary for a reasonable initial design. Using the procedure, we conducted a primary load assessment for the design of Delta. By calculating the load response to 588 load cases, we identified the critical load scenario and the maximal axial stress. As the stress was too high, we improved the geometry in order to reduce loads and assessed proper scantlings for the critical section. We present the formulation of the procedure, the validation of the results, and the implementation for the structural design of the Delta VLFS.
- 23 June 2020
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 16 (7) , 1-15
Verifying a new hydro-elastic design method for planing boats by full-scale sea trials
Typically, the dominant load for the design of planing hulls is slamming, while sailing fast at head seas. Slamming is a violent fluid-structure interaction, where dynamics, hydro-elasticity, and nonlinearity are important. Considering these effects in a rational design may reduce the scantlings as compare to design by rules. This research verifies our rational design method, published recently. For this verification, we designed a special research boat, which has one rules-designed side and one rational-design side, with 20% thinner plates and double stiffeners spacing, which make hydro-elasticity significant. Comparison of critical stresses between rules-design, our rational-design, and measurements shows: For the heavy side (rules-design) rules, rational, and trials show similar stresses, so both rules and rational are applicable; however for the light side (rational-design), rules dramatically over assess the stresses, while rational and trials are similar. We therefore expect this study to advance the design of more efficient boats.
- 23 June 2020
- Published by Taylor & Francis in Ships and Offshore Structures
- Vol. 16 (7) , 1-15
Verifying a new hydro-elastic design method for planing boats by full-scale sea trials
Typically, the dominant load for the design of planing hulls is slamming, while sailing fast at head seas. Slamming is a violent fluid-structure interaction, where dynamics, hydro-elasticity, and nonlinearity are important. Considering these effects in a rational design may reduce the scantlings as compare to design by rules. This research verifies our rational design method, published recently. For this verification, we designed a special research boat, which has one rules-designed side and one rational-design side, with 20% thinner plates and double stiffeners spacing, which make hydro-elasticity significant. Comparison of critical stresses between rules-design, our rational-design, and measurements shows: For the heavy side (rules-design) rules, rational, and trials show similar stresses, so both rules and rational are applicable; however for the light side (rational-design), rules dramatically over assess the stresses, while rational and trials are similar. We therefore expect this study to advance the design of more efficient boats.