Venkata Ramesh Babu Gurram
Research Subjects
Research Interests
Venkata Ramesh Babu Gurram has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Kamaraju Seetha Rama Rao
Catalysis & Fine Chemicals Division, CSIR-Indian Institute of Chemical Technology, Hyderabad, India
8 shared publications - Siva Sankar Enumula
Inorganic and Physical Chemistry Division
8 shared publications David Raju Burri
Catalysis and Fine Chemicals Division, CSIR-Indian Institute of Chemical Technology, Hyderabad, India
7 shared publications- David Raju Burri
Catalysis Laboratory, Indian Institute of Chemical Technology, Hyderabad, India
6 shared publications Kumara Swamy Koppadi
6 shared publicationsRaji Reddy Chada
6 shared publications
Latest Publications
- 1 January 2019
- Published by Elsevier in Catalysis Communications
- Vol. 118, 1-4
Role of the Fe oxidation states on the catalytic oxy-dehydrogenation of ethylbenzene using CO2 as a soft oxidant over FeOx/carbon-alumina
- 1 January 2019
- Published by Elsevier in Catalysis Communications
- Vol. 118, 1-4
Role of the Fe oxidation states on the catalytic oxy-dehydrogenation of ethylbenzene using CO2 as a soft oxidant over FeOx/carbon-alumina
- Open Access
- 27 October 2018
- Published by Scientific Scholar in Arabian Journal of Chemistry
- Vol. 13 (1) , 3236-3245
Utilization of CO2 and N2 for selective synthesis of styrene from ethylbenzene over high surface area γ-Al2O3 supported molybdenum nitride catalysts
The present work highlights the synthesis of styrene from ethylbenzene dehydrogenation by coupling with reverse water gas shift reaction (RWGSR) and ammonia synthesis reactions over high surface area Al2O3 supported molybdenum nitride (γ-Mo2N) catalyst. γ-Mo2N was prepared by in-situ thermal decomposition of molybdenum hexamethylenetetramine complex and the support high surface area Al2O3 (HSA) was prepared by sol-gel method. Different weight loadings of γ-Mo2N (10, 20 and 30) supported on HSA catalysts were systematically characterized by using powder XRD, N2 physisorption, H2 - TPR, XPS and TEM analysis. XRD, TEM and normalized BET surface area analysis reveal highly dispersed nitride species over HSA surface. The synthesized catalysts have been studied for ethylbenzene dehydrogenation reaction using CO2 and N2 as feed gases with different percentage compositions. It was found that CO2 rich N2 feed gas favors higher ethylbenzene conversion due to RWGSR and N2 rich CO2 favors higher selectivity to styrene due to ammonia synthesis. EB dehydrogenation along with RWGSR and ammonia synthesis reactions come along and privileged the formation of higher styrene yields.
- 27 October 2018
- Published by Scientific Scholar in Arabian Journal of Chemistry
- Vol. 13 (1) , 3236-3245
Open AccessUtilization of CO2 and N2 for selective synthesis of styrene from ethylbenzene over high surface area γ-Al2O3 supported molybdenum nitride catalysts
The present work highlights the synthesis of styrene from ethylbenzene dehydrogenation by coupling with reverse water gas shift reaction (RWGSR) and ammonia synthesis reactions over high surface area Al2O3 supported molybdenum nitride (γ-Mo2N) catalyst. γ-Mo2N was prepared by in-situ thermal decomposition of molybdenum hexamethylenetetramine complex and the support high surface area Al2O3 (HSA) was prepared by sol-gel method. Different weight loadings of γ-Mo2N (10, 20 and 30) supported on HSA catalysts were systematically characterized by using powder XRD, N2 physisorption, H2 - TPR, XPS and TEM analysis. XRD, TEM and normalized BET surface area analysis reveal highly dispersed nitride species over HSA surface. The synthesized catalysts have been studied for ethylbenzene dehydrogenation reaction using CO2 and N2 as feed gases with different percentage compositions. It was found that CO2 rich N2 feed gas favors higher ethylbenzene conversion due to RWGSR and N2 rich CO2 favors higher selectivity to styrene due to ammonia synthesis. EB dehydrogenation along with RWGSR and ammonia synthesis reactions come along and privileged the formation of higher styrene yields.
- 13 September 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (34) , 9946-9952
Pd/SBA‐15 Catalysts for Hydrogenation of Furfuryl Alcohol to Tetrahydrofurfuryl Alcohol
With the aim of hydrogenating furfuryl alcohol into tetrahydrofurfuryl alcohol by avoiding high pressure operations and harmful solvents, a mild and sustainabable operaration is adopted. At this juncture, 1Pd/SBA15, 2Pd/SBA‐15 and 3Pd/SBA‐15 catalysts (where 1, 2 and 3 are wt% of Pd) were prepared by wet impregnation method and characterized by powder X‐ray Diffraction, N 2 ‐physorption, Scanning Electron Microscopy, Transmission Electron Microscopy, CO‐Pulse Chemisorption, H 2 ‐Temperature Programmed Reduction, and Inductively Coupled Plasma Optical Emission Spectroscopytechniques. Among the three catalysts, 2Pd/SBA‐15 catalyst is capable of transforming furfuryl alcohol to tetrahydrofurfuryl alcohol with nearly 100% conversion and 85% selectivity.The high surface area of SBA‐15 and high dispersion of Pd nanoparticles with large number seems to be influencing such high catalytic activity of 2Pd/SBA‐15. The 2Pd/SBA‐15 catalyst offers stable activity and selectivity during 12 h time on stream, signifying the role of support in the stabilization of Pd nano particles.
- 13 September 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (34) , 9946-9952
Pd/SBA‐15 Catalysts for Hydrogenation of Furfuryl Alcohol to Tetrahydrofurfuryl Alcohol
With the aim of hydrogenating furfuryl alcohol into tetrahydrofurfuryl alcohol by avoiding high pressure operations and harmful solvents, a mild and sustainabable operaration is adopted. At this juncture, 1Pd/SBA15, 2Pd/SBA‐15 and 3Pd/SBA‐15 catalysts (where 1, 2 and 3 are wt% of Pd) were prepared by wet impregnation method and characterized by powder X‐ray Diffraction, N 2 ‐physorption, Scanning Electron Microscopy, Transmission Electron Microscopy, CO‐Pulse Chemisorption, H 2 ‐Temperature Programmed Reduction, and Inductively Coupled Plasma Optical Emission Spectroscopytechniques. Among the three catalysts, 2Pd/SBA‐15 catalyst is capable of transforming furfuryl alcohol to tetrahydrofurfuryl alcohol with nearly 100% conversion and 85% selectivity.The high surface area of SBA‐15 and high dispersion of Pd nanoparticles with large number seems to be influencing such high catalytic activity of 2Pd/SBA‐15. The 2Pd/SBA‐15 catalyst offers stable activity and selectivity during 12 h time on stream, signifying the role of support in the stabilization of Pd nano particles.
- 13 August 2018
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 42 (19) , 15714-15725
Mesoporous silica supported cobalt catalysts for gas phase hydrogenation of nitrobenzene: role of pore structure on stable catalytic performance
Highly dispersed cobalt nanoparticles were prepared over mesoporous silica with different pore structures (2D-hexagonal COK-12 and 3D-cubic SBA-16). These catalysts were evaluated for gas phase hydrogenation of nitrobenzene to aniline at atmospheric H2 pressure. A combination of catalytic activity and characterization results were assessed to establish the role of the support pore structure on hydrogenation activity. XRD, N2-physisorption, SEM and TEM analysis confirmed the presence of mesoporous structures in the supported cobalt catalysts. H2-TPR, H2-pulse chemisorption and TEM studies demonstrated higher dispersion of cobalt nanoparticles in Co/SBA-16 than in the Co/COK-12 catalyst. During the time-on-stream study the Co/SBA-16 catalyst experienced a gradual deactivation whereas the Co/COK-12 catalyst exhibited constant catalytic performance with respect to the hydrogenation of nitrobenzene. The interconnected cage type pores in Co/SBA-16 catalyst allowed the product molecules to participate in further reactions. This resulted in the formation of condensed products and coke deposition. The Co/SBA-16 catalyst was rapidly deactivated due to pore blocking through coke deposition. N2-Physisorption, TGA, H2-TPR and CHNS elemental analysis of spent catalysts confirmed the severe coke deposition in the Co/SBA-16 catalyst compared to the Co/COK-12 catalyst.
- 13 August 2018
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 42 (19) , 15714-15725
Mesoporous silica supported cobalt catalysts for gas phase hydrogenation of nitrobenzene: role of pore structure on stable catalytic performance
Highly dispersed cobalt nanoparticles were prepared over mesoporous silica with different pore structures (2D-hexagonal COK-12 and 3D-cubic SBA-16). These catalysts were evaluated for gas phase hydrogenation of nitrobenzene to aniline at atmospheric H2 pressure. A combination of catalytic activity and characterization results were assessed to establish the role of the support pore structure on hydrogenation activity. XRD, N2-physisorption, SEM and TEM analysis confirmed the presence of mesoporous structures in the supported cobalt catalysts. H2-TPR, H2-pulse chemisorption and TEM studies demonstrated higher dispersion of cobalt nanoparticles in Co/SBA-16 than in the Co/COK-12 catalyst. During the time-on-stream study the Co/SBA-16 catalyst experienced a gradual deactivation whereas the Co/COK-12 catalyst exhibited constant catalytic performance with respect to the hydrogenation of nitrobenzene. The interconnected cage type pores in Co/SBA-16 catalyst allowed the product molecules to participate in further reactions. This resulted in the formation of condensed products and coke deposition. The Co/SBA-16 catalyst was rapidly deactivated due to pore blocking through coke deposition. N2-Physisorption, TGA, H2-TPR and CHNS elemental analysis of spent catalysts confirmed the severe coke deposition in the Co/SBA-16 catalyst compared to the Co/COK-12 catalyst.
- 30 July 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (28) , 8277-8284
Role of the Feed Gas on the Selective Catalytic Dehydrogenation of Benzyl Alcohol over Cu/Hydrotalcite Catalyst
The present work highlights the utilization of CO2 as feed gas for the catalytic dehydrogenation of benzyl alcohol to benzaldehyde over supported Cu catalysts in continuous process. Powder X‐Ray Diffraction (XRD) patterns, N2O pulse chemisorption results, H2‐Temperature Programmed Reduction (H 2 ‐TPR) profiles and Transmission Electron Microscopy (TEM) analysis suggests that Cu/hydrotalcite possess high dispersion with small Cu atoms. Due to the united effects of high metal dispersion and bifunctional acid base properties (as evidenced by Temperature Programmed Desorption (TPD) of CO2 and NH3), Cu/hydrotalcite catalyst offers better activity than Cu/Al2O3 and Cu/MgO. The presence of CO2 promotes reverse water gas shift reaction by consuming the in‐situ generated H2 in dehydrogenation process and maintains stable benzaldehyde selectivity. Whereas the presence of N2 promotes the disproportionation reaction and leads to decrease in benzaldehyde selectivity.
- 30 July 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (28) , 8277-8284
Role of the Feed Gas on the Selective Catalytic Dehydrogenation of Benzyl Alcohol over Cu/Hydrotalcite Catalyst
The present work highlights the utilization of CO2 as feed gas for the catalytic dehydrogenation of benzyl alcohol to benzaldehyde over supported Cu catalysts in continuous process. Powder X‐Ray Diffraction (XRD) patterns, N2O pulse chemisorption results, H2‐Temperature Programmed Reduction (H 2 ‐TPR) profiles and Transmission Electron Microscopy (TEM) analysis suggests that Cu/hydrotalcite possess high dispersion with small Cu atoms. Due to the united effects of high metal dispersion and bifunctional acid base properties (as evidenced by Temperature Programmed Desorption (TPD) of CO2 and NH3), Cu/hydrotalcite catalyst offers better activity than Cu/Al2O3 and Cu/MgO. The presence of CO2 promotes reverse water gas shift reaction by consuming the in‐situ generated H2 in dehydrogenation process and maintains stable benzaldehyde selectivity. Whereas the presence of N2 promotes the disproportionation reaction and leads to decrease in benzaldehyde selectivity.
- 12 July 2018
- Published by Springer Nature in Catalysis Letters
- Vol. 148 (9) , 2891-2900
In Situ Generation of Cu0 Supported on TiO2 Aerogel as a Catalyst for the Vapour Phase Hydrogenation of Nitrobenzene to Aniline
- 12 July 2018
- Published by Springer Nature in Catalysis Letters
- Vol. 148 (9) , 2891-2900
In Situ Generation of Cu0 Supported on TiO2 Aerogel as a Catalyst for the Vapour Phase Hydrogenation of Nitrobenzene to Aniline
- 6 June 2018
- Published by Springer Nature in Catalysis Surveys from Asia
- Vol. 22 (3) , 166-180
Synthesis and Industrial Catalytic Applications of Binary and Ternary Molybdenum Nitrides: A Review
- 6 June 2018
- Published by Springer Nature in Catalysis Surveys from Asia
- Vol. 22 (3) , 166-180
Synthesis and Industrial Catalytic Applications of Binary and Ternary Molybdenum Nitrides: A Review
- 22 March 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (11) , 3079-3086
Synthesis of Hydrocinnamaldehyde via Vapor Phase Dehydrogenation of Hydrocinnamyl alcohol over Rice‐Derived MgO‐Supported Copper Catalysts
Green synthetic method for the production of hydrocinnamaldehyde via vapour phase dehydrogenation of hydrocinnnamyl alcohol over high surface area MgO (HSA‐MgO) supported Cu catalyst at atmospheric pressure without using any additives has been attempted. Cu/HSA‐MgO catalysts have been prepared by thermal decomposition of cooked rice grains mixed with magnesium acetate followed by wet impregnation by Cu. The prepared catalysts have been characterized by various physiochemical characterization techniques such as TGA, XRD, BET surface area, TPD of CO 2 , H 2 ‐TPR, TEM, SEM, EDX and N 2 O pulse chemisorption. Among all the catalysts, 10%Cu/HSA‐MgO catalyst is found to be the best catalyst with 78% conversion of hydrocinnnamyl alcohol and 96% selectivity of hydrocinnamaldehyde. N 2 O pulse chemisorption and TPR analysis results divulge the high dispersion of smaller copper particles on the surface of HSA‐MgO support which is considered to be responsible for its superior catalytic activity.
- 22 March 2018
- Published by Wiley in ChemistrySelect
- Vol. 3 (11) , 3079-3086
Synthesis of Hydrocinnamaldehyde via Vapor Phase Dehydrogenation of Hydrocinnamyl alcohol over Rice‐Derived MgO‐Supported Copper Catalysts
Green synthetic method for the production of hydrocinnamaldehyde via vapour phase dehydrogenation of hydrocinnnamyl alcohol over high surface area MgO (HSA‐MgO) supported Cu catalyst at atmospheric pressure without using any additives has been attempted. Cu/HSA‐MgO catalysts have been prepared by thermal decomposition of cooked rice grains mixed with magnesium acetate followed by wet impregnation by Cu. The prepared catalysts have been characterized by various physiochemical characterization techniques such as TGA, XRD, BET surface area, TPD of CO 2 , H 2 ‐TPR, TEM, SEM, EDX and N 2 O pulse chemisorption. Among all the catalysts, 10%Cu/HSA‐MgO catalyst is found to be the best catalyst with 78% conversion of hydrocinnnamyl alcohol and 96% selectivity of hydrocinnamaldehyde. N 2 O pulse chemisorption and TPR analysis results divulge the high dispersion of smaller copper particles on the surface of HSA‐MgO support which is considered to be responsible for its superior catalytic activity.
- 1 March 2018
- Published by Elsevier in Catalysis Communications
- Vol. 106, 73-77
Vapour phase selective hydrogenation of benzaldehyde to benzyl alcohol using Cu supported Mg-Al hydrotalicite catalyst
- 1 March 2018
- Published by Elsevier in Catalysis Communications
- Vol. 106, 73-77
Vapour phase selective hydrogenation of benzaldehyde to benzyl alcohol using Cu supported Mg-Al hydrotalicite catalyst