Antonio Nieto-Márquez
Antonio Nieto-Márquez has a total of 104 co-authors. Here are the top co-authors by number of shared publications:
- Jose Luis Valverde
Department of Chemical Engineering, University of Castilla La Mancha, Avenida Camilo José Cela 10, 13071 Ciudad Real, Spain
16 shared publications - Amaya Romero
Department of Chemical Engineering, University of Castilla-La Mancha, Avda. Camilo José Cela 12, Ciudad Real 13071, Spain
12 shared publications - Evangelina Atanes-Sánchez
Departamento de Ingeniería Mecánica, Química y Diseño Industrial, Universidad Politécnica de Madrid, 28012 Madrid, Spain
8 shared publications - José Antonio Díaz
Universidad Politécnica de Madrid (UPM), Department of Mechanical, Chemical and Industrial Design Engineering, ETSIDI, Ronda de Valencia 3, 28012 Madrid, Spain
6 shared publications - Esther Alonso
BioEcoUva, Research Institute on Bioeconomy, Pressure Technologies Group (PressTech), Department of Chemical Engineering and Environmental Technology, University of Valladolid, 47011Valladolid, Spain
5 shared publications - Francisco Fernandez-Martinez
Universidad Politécnica de Madrid
5 shared publications
Latest Publications
- Open Access
- 14 August 2026
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 415
Adsorption-based CO2 separation from gas streams: Porous adsorbents, mechanisms, and cyclic process design
- 14 August 2026
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 415
Open AccessAdsorption-based CO2 separation from gas streams: Porous adsorbents, mechanisms, and cyclic process design
- Open Access
- 26 January 2026
- Published by Elsevier in Open Ceramics
- Vol. 25
Visible-light-activated Cu and Fe-doped TiO2 thin films on glass: photocatalytic, antibacterial and self-cleaning performance
- 26 January 2026
- Published by Elsevier in Open Ceramics
- Vol. 25
Open AccessVisible-light-activated Cu and Fe-doped TiO2 thin films on glass: photocatalytic, antibacterial and self-cleaning performance
- Open Access
- 22 August 2025
- Published by Elsevier in Separation and Purification Technology
- Vol. 379
Separation of microscale aggregates from nanofluids using a mini-hydrocyclone: Influence of flow rate, concentration, and temperature
- 22 August 2025
- Published by Elsevier in Separation and Purification Technology
- Vol. 379
Open AccessSeparation of microscale aggregates from nanofluids using a mini-hydrocyclone: Influence of flow rate, concentration, and temperature
- Open Access
- 4 February 2025
- Published by Elsevier in Separation and Purification Technology
- Vol. 362
Heat integration and process improvement of a batch distillation unit using a gradual feeding strategy: A case study on MIBK-water separation
- 4 February 2025
- Published by Elsevier in Separation and Purification Technology
- Vol. 362
Open AccessHeat integration and process improvement of a batch distillation unit using a gradual feeding strategy: A case study on MIBK-water separation
- Open Access
- 18 October 2024
- Published by Elsevier in Separation and Purification Technology
- Vol. 357
Improvement of energy efficiency and production performance in a heteroazeotropic batch distillation unit: A study on decanter control and feeding strategy
- 18 October 2024
- Published by Elsevier in Separation and Purification Technology
- Vol. 357
Open AccessImprovement of energy efficiency and production performance in a heteroazeotropic batch distillation unit: A study on decanter control and feeding strategy
- 20 June 2024
- Published by Springer Nature
- p. 479-488
On the Tribological Performance of Vegetable Lubricants: Experimental Investigation on Rice Bran Oil with Propyl Gallate
- 20 June 2024
- Published by Springer Nature
- p. 479-488
On the Tribological Performance of Vegetable Lubricants: Experimental Investigation on Rice Bran Oil with Propyl Gallate
- Open Access
- 12 May 2024
- Published by Elsevier in Separation and Purification Technology
- Vol. 350
Process design and simulation of methyl isobutyl ketone (MIBK) dehydration by batch distillation: A study on unit configuration and operational policies
- 12 May 2024
- Published by Elsevier in Separation and Purification Technology
- Vol. 350
Open AccessProcess design and simulation of methyl isobutyl ketone (MIBK) dehydration by batch distillation: A study on unit configuration and operational policies
- Open Access
- 16 June 2023
- Published by Elsevier in Atmospheric Pollution Research
- Vol. 14 (8)
Improving indoor air quality by using photocatalytic paints. Real scale study at the Technical University of Madrid
- 16 June 2023
- Published by Elsevier in Atmospheric Pollution Research
- Vol. 14 (8)
Open AccessImproving indoor air quality by using photocatalytic paints. Real scale study at the Technical University of Madrid
- Open Access
- 1 January 2022
- Published by Elsevier in Chemical Engineering and Processing - Process Intensification
- Vol. 171, 108761
Separation of a water/MIBK mixture by batch heteroazeotropic distillation: A self-entrained case
- 1 January 2022
- Published by Elsevier in Chemical Engineering and Processing - Process Intensification
- Vol. 171, 108761
Open AccessSeparation of a water/MIBK mixture by batch heteroazeotropic distillation: A self-entrained case
- Open Access
- 10 January 2020
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 167 (13) , 134511
Towards Understanding Lignin Electrolysis: Electro-Oxidation of a β -O-4 Linkage Model on PtRu Electrodes
The reaction mechanism for lignin electrolysis has been rarely studied. In a previous work, we reported the electrolysis of lignin on a Polymer Electrolyte Membrane (PEM) alkaline electrolyzer with PtRu-based anodes. Even though the performance of this technology was proven in a low range of applied potentials (2 production rates. The aim of this work is to study the main limitations of PtRu electrodes for lignin electro-oxidation. 2-Phenoxyethanol, 2-PE, has been chosen as a model molecule of the β -O-4 linkage, which represents ≈60% of the lignin bio-polymer. The performed electrochemical experiments, together with the HPLC analysis of the anodic products and the thermodynamic DFT computations, suggest that the electro-oxidation of the 2-PE organic molecule is very limited and leads to the production of the carboxylic acid as the final reaction product. In addition, the electro-catalytic system was severely poisoned, probably owing to the presence of some reaction by-products. All in all, this study allows advancing one step-forward towards understanding the reaction mechanism and the main limitations of the lignin electrolysis technology in the above described system.
- 10 January 2020
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 167 (13) , 134511
Open AccessTowards Understanding Lignin Electrolysis: Electro-Oxidation of a β -O-4 Linkage Model on PtRu Electrodes
The reaction mechanism for lignin electrolysis has been rarely studied. In a previous work, we reported the electrolysis of lignin on a Polymer Electrolyte Membrane (PEM) alkaline electrolyzer with PtRu-based anodes. Even though the performance of this technology was proven in a low range of applied potentials (2 production rates. The aim of this work is to study the main limitations of PtRu electrodes for lignin electro-oxidation. 2-Phenoxyethanol, 2-PE, has been chosen as a model molecule of the β -O-4 linkage, which represents ≈60% of the lignin bio-polymer. The performed electrochemical experiments, together with the HPLC analysis of the anodic products and the thermodynamic DFT computations, suggest that the electro-oxidation of the 2-PE organic molecule is very limited and leads to the production of the carboxylic acid as the final reaction product. In addition, the electro-catalytic system was severely poisoned, probably owing to the presence of some reaction by-products. All in all, this study allows advancing one step-forward towards understanding the reaction mechanism and the main limitations of the lignin electrolysis technology in the above described system.