Laurent Castro
Laurent Castro has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
C. Tessier
SAFT, 33074 Bordeaux cedex, France
3 shared publicationsD. Gonbeau
IPREM-ECP (UMR 5254 CNRS), University of Pau, 64053 Pau Cedex 9, France
3 shared publications- David Mecerreyes
POLYMAT, University of the Basque Country UPV/EHU, Avenida Tolosa 72, Donostia-San Sebastián 20018, Spain
3 shared publications J. Bréger
SAFT, 33074 Bordeaux cedex, France
3 shared publications- Marta Alvarez-Tirado
POLYMAT, University of the Basque Country UPV/EHU, Avenida Tolosa 72, Donostia-San Sebastian, Guipuzcoa 20018, Spain
3 shared publications - Mickael Dollé
Département de Chimie Université de Montréal Montréal Québec Canada
3 shared publications
Latest Publications
- 31 March 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Matériaux d’électrode positive à base de phosphates pour accumulateurs Li-ion et phénomènes aux interfaces : apport de la spectroscopie photoélectronique à rayonnement X (XPS)
Ce travail de thèse est centré sur l’étude de matériaux LiMPO4 (M=Fe, Mn, Co) et de leur évolution en cyclage (processus rédox et interfaces électrode / électrolyte) dans des accumulateurs Li-ion. Il a été mené essentiellement sur la base d’analyses en spectroscopie photoélectronique à rayonnement X (XPS) couplées à des tests électrochimiques. Une oxydation de surface du phosphate LiFePO4 a été mise en évidence lors d’une exposition à l’air de ce matériau avec la formation d’impuretés de surface type Fe2O3. Au plan structure électronique, l’analyse des bandes de valence des matériaux LiMPO4 (M=Fe, Mn, Co) a notamment permis, pour LiFePO4, la visualisation de l’électron spin down du niveau Fe 3d amenant la première preuve expérimentale de la configuration électronique particulière (3d↑)5(3d↓)1 de Fe2+dans ce matériau. Ce travail a également contribué à mieux comprendre l’influence de la température de fonctionnement ainsi que de la nature de l’électrode négative sur les mécanismes de vieillissement des accumulateurs Li-ion. Pour les accumulateurs LiFePO4 // Graphite, la comparaison d’interfaces solide/électrolyte distribuées spatialement a montré que le vieillissement se caractérisant par la perte de lithium actif pouvait être mis en parallèle avec une hétérogénéité de fonctionnement de l’électrode positive. Enfin, l’extension des travaux aux matériaux prometteurs d’électrode positive Li(FeMn)PO4 a révélé que le potentiel de travail de fin de charge plus élevé pour le phosphate mixte, comparativement à LiFePO4, résultait dans une réactivité accrue vis-à-vis de l’électrolyte dont les conséquences ont été analysées.
- 31 March 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Matériaux d’électrode positive à base de phosphates pour accumulateurs Li-ion et phénomènes aux interfaces : apport de la spectroscopie photoélectronique à rayonnement X (XPS)
Ce travail de thèse est centré sur l’étude de matériaux LiMPO4 (M=Fe, Mn, Co) et de leur évolution en cyclage (processus rédox et interfaces électrode / électrolyte) dans des accumulateurs Li-ion. Il a été mené essentiellement sur la base d’analyses en spectroscopie photoélectronique à rayonnement X (XPS) couplées à des tests électrochimiques. Une oxydation de surface du phosphate LiFePO4 a été mise en évidence lors d’une exposition à l’air de ce matériau avec la formation d’impuretés de surface type Fe2O3. Au plan structure électronique, l’analyse des bandes de valence des matériaux LiMPO4 (M=Fe, Mn, Co) a notamment permis, pour LiFePO4, la visualisation de l’électron spin down du niveau Fe 3d amenant la première preuve expérimentale de la configuration électronique particulière (3d↑)5(3d↓)1 de Fe2+dans ce matériau. Ce travail a également contribué à mieux comprendre l’influence de la température de fonctionnement ainsi que de la nature de l’électrode négative sur les mécanismes de vieillissement des accumulateurs Li-ion. Pour les accumulateurs LiFePO4 // Graphite, la comparaison d’interfaces solide/électrolyte distribuées spatialement a montré que le vieillissement se caractérisant par la perte de lithium actif pouvait être mis en parallèle avec une hétérogénéité de fonctionnement de l’électrode positive. Enfin, l’extension des travaux aux matériaux prometteurs d’électrode positive Li(FeMn)PO4 a révélé que le potentiel de travail de fin de charge plus élevé pour le phosphate mixte, comparativement à LiFePO4, résultait dans une réactivité accrue vis-à-vis de l’électrolyte dont les conséquences ont été analysées.
- 26 December 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (9)
A Complete Operando Structural and Redox Perspective on the O2‐Type Lithium‐Rich Manganese Oxide LiMn 0.75 O 2
Lithium‐rich materials with anionic redox are promising candidates for high‐energy‐density positive electrodes. Manganese‐based compounds like Li 2 MnO 3 offer advantages, including low toxicity and abundant resources, but suffer from poor rate capability due to irreversible oxygen loss and structural transformation. Here, we study an O2‐type layered oxide LiMn 0.75 O 2 , which shows significantly enhanced cycling stability, retaining 78% of its capacity after 140 cycles, with suppressed structural reorganization and more reversible oxygen redox. By combining electrochemical analysis with operando X‐ray absorption spectroscopy (XAS) and pair distribution function measurements (PDF), we provide a detailed picture of the material's structural and redox evolution. The first charge differs markedly from subsequent cycles, combining partially reversible bulk oxygen redox, irreversible Li extraction from surface regions, and impurities with oxygen gas release. From the second cycle onward, the reversible bulk oxygen redox process becomes progressively activated. Besides, no clear evidence of short O–O dimers are observed in PDF, suggesting a limited degree of oxygen dimerization during the oxygen redox. Overall, this work showcases the high‐capacity potential of Mn‐based Li‐rich materials, deepens understanding of their redox behavior, and underscores the power of PDF‐based operando techniques in probing local structural changes during cycling.
- 26 December 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (9)
A Complete Operando Structural and Redox Perspective on the O2‐Type Lithium‐Rich Manganese Oxide LiMn 0.75 O 2
Lithium‐rich materials with anionic redox are promising candidates for high‐energy‐density positive electrodes. Manganese‐based compounds like Li 2 MnO 3 offer advantages, including low toxicity and abundant resources, but suffer from poor rate capability due to irreversible oxygen loss and structural transformation. Here, we study an O2‐type layered oxide LiMn 0.75 O 2 , which shows significantly enhanced cycling stability, retaining 78% of its capacity after 140 cycles, with suppressed structural reorganization and more reversible oxygen redox. By combining electrochemical analysis with operando X‐ray absorption spectroscopy (XAS) and pair distribution function measurements (PDF), we provide a detailed picture of the material's structural and redox evolution. The first charge differs markedly from subsequent cycles, combining partially reversible bulk oxygen redox, irreversible Li extraction from surface regions, and impurities with oxygen gas release. From the second cycle onward, the reversible bulk oxygen redox process becomes progressively activated. Besides, no clear evidence of short O–O dimers are observed in PDF, suggesting a limited degree of oxygen dimerization during the oxygen redox. Overall, this work showcases the high‐capacity potential of Mn‐based Li‐rich materials, deepens understanding of their redox behavior, and underscores the power of PDF‐based operando techniques in probing local structural changes during cycling.
- Open Access
- 26 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Electrochemical and Mechanical Evolution of Sulfide-Based Solid Electrolytes: Insights from Operando XPS and Cell Pressure Measurements
Understanding the electrochemical and mechanical behavior of solid electrolytes beyond their electrochemical stability window is crucial for enabling high energy density all-solid-state batteries. Accordingly, this work systematically studies a model working electrode of Li3PS4, ball milled with vapor grown carbon fiber (VGCF). Operando X-ray photoelectron spectroscopy can identify and quantify the potential-dependent redox byproducts, their reversibility, and electrical properties, while operando cell pressure measurements correlate these with volume changes and mechanical instability. The study examines voltages up to 5.0 V and down to -0.05 V vs. Li/Li+, mimicking cathode and anode cycling. It demonstrates that within the 2.4 V – 5.0 V region, Li3PS4 oxidation byproducts are primarily polysulfides composed of bridging sulfurs (P-S-S-P) between PS43- units, free of elemental sulfur (S0), and electrically conductive. The Li3PS4 oxidation process occurs at 2.8 V during 1st charge and ends at 3.4 V, with volume shrinkage at the VGCF interface. During reduction (2.4 to -0.05 V), polysulfides convert reversibly to Li3PS4 between 1.9 – 1.7 V, then to Li2S and LinP (0 ≤ n ≤ 3) between 1.9 – 0.6 V, causing volume expansion and the transition to an electrically insulating interphase. Below 0.6 V, Li2O formation dominates without further evolution of Li2S or LinP.
- 26 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessElectrochemical and Mechanical Evolution of Sulfide-Based Solid Electrolytes: Insights from Operando XPS and Cell Pressure Measurements
Understanding the electrochemical and mechanical behavior of solid electrolytes beyond their electrochemical stability window is crucial for enabling high energy density all-solid-state batteries. Accordingly, this work systematically studies a model working electrode of Li3PS4, ball milled with vapor grown carbon fiber (VGCF). Operando X-ray photoelectron spectroscopy can identify and quantify the potential-dependent redox byproducts, their reversibility, and electrical properties, while operando cell pressure measurements correlate these with volume changes and mechanical instability. The study examines voltages up to 5.0 V and down to -0.05 V vs. Li/Li+, mimicking cathode and anode cycling. It demonstrates that within the 2.4 V – 5.0 V region, Li3PS4 oxidation byproducts are primarily polysulfides composed of bridging sulfurs (P-S-S-P) between PS43- units, free of elemental sulfur (S0), and electrically conductive. The Li3PS4 oxidation process occurs at 2.8 V during 1st charge and ends at 3.4 V, with volume shrinkage at the VGCF interface. During reduction (2.4 to -0.05 V), polysulfides convert reversibly to Li3PS4 between 1.9 – 1.7 V, then to Li2S and LinP (0 ≤ n ≤ 3) between 1.9 – 0.6 V, causing volume expansion and the transition to an electrically insulating interphase. Below 0.6 V, Li2O formation dominates without further evolution of Li2S or LinP.
- 24 June 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (26) , 12947-12953
Using Howardevansite Framework Adaptivity to Explore the Li2O–Fe2O3–V2O5 Phase Diagram
An iron vanadate in the Li2O-Fe2O3-V2O5 ternary phase diagram was successfully synthesized by using β-Cu3Fe4(VO4)6 framework adaptivity. The three Cu2+ ions in Howardevansite β-Cu3Fe4(VO4)6 were substituted by 1.5 Li+ and 1.5 Fe3+ to form Li1.5Fe5.5(VO4)6. The structure was determined based on single-crystal X-ray diffraction data, which showed that it crystallizes in the triclinic P1̅ space group. The structure consists of zigzag chains formed of iron octahedra and distorted trigonal bipyramids running along the [10-1] direction and connected into a 3D framework by the VO4 tetrahedra. The framework can accommodate Li+ ions. Magnetic susceptibility revealed the presence of high spin Fe3+ ions in the material. Li1.5Fe5.5(VO4)6 was tested in electrochemistry and can reversibly insert up to 5.5 Li+ ions, with a theoretical capacity of 146 mA h/g, making it a suitable insertion positive electrode material. During galvanostatic discharge, a maximum capacity of 128 mA h/g and a reversible capacity of 78 mA h/g were obtained after 100 cycles at C/10.
- 24 June 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (26) , 12947-12953
Using Howardevansite Framework Adaptivity to Explore the Li2O–Fe2O3–V2O5 Phase Diagram
An iron vanadate in the Li2O-Fe2O3-V2O5 ternary phase diagram was successfully synthesized by using β-Cu3Fe4(VO4)6 framework adaptivity. The three Cu2+ ions in Howardevansite β-Cu3Fe4(VO4)6 were substituted by 1.5 Li+ and 1.5 Fe3+ to form Li1.5Fe5.5(VO4)6. The structure was determined based on single-crystal X-ray diffraction data, which showed that it crystallizes in the triclinic P1̅ space group. The structure consists of zigzag chains formed of iron octahedra and distorted trigonal bipyramids running along the [10-1] direction and connected into a 3D framework by the VO4 tetrahedra. The framework can accommodate Li+ ions. Magnetic susceptibility revealed the presence of high spin Fe3+ ions in the material. Li1.5Fe5.5(VO4)6 was tested in electrochemistry and can reversibly insert up to 5.5 Li+ ions, with a theoretical capacity of 146 mA h/g, making it a suitable insertion positive electrode material. During galvanostatic discharge, a maximum capacity of 128 mA h/g and a reversible capacity of 78 mA h/g were obtained after 100 cycles at C/10.
- 3 October 2023
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 35 (20) , 8540-8550
Stacking Faults in an O2-type Cobalt-Free Lithium-Rich Layered Oxide: Mechanisms of the Ion Exchange Reaction and Lithium Electrochemical (De)Intercalation
- 3 October 2023
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 35 (20) , 8540-8550
Stacking Faults in an O2-type Cobalt-Free Lithium-Rich Layered Oxide: Mechanisms of the Ion Exchange Reaction and Lithium Electrochemical (De)Intercalation
- 9 October 2022
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2022-02 (4) , 516
Insoluble Solid Organic Catalysts for Non-Aqueous Lithium-Air Batteries
The chemistries based on the Li-O2 couple in aprotic electrolyte seem promising to provide ultrahigh-energy density values and outperform the current LIB technology. The main targeted application is to power electrified vehicles, with the hope of achieving high driving range. Unfortunately, serious side-reaction issues have plagued their development for practical applications so far. For example, during the discharge process, undesired insulating products are formed instead of lithium peroxide. Moreover, the blocking/clogging effect on the air electrode due to a deposition process leads to an overpotential during both the discharge (Oxygen Reduction Reaction: ORR) and charge processes (Oxygen Evolution Reaction: OER), which results in electrode degradation, electrolyte decomposition and precocious cell failure. A promising strategy to reduce these overpotentials is the use of organic redox mediators by taking advantage of their tunability. For several years, our group has been developing lithiated organic materials with average redox potentials close to the O2/Li2O2 redox couple (2.96 V vs Li+/Li0). We here report the effect of Li2DAnT (alone or in combination with Li4-p-DHT [1]) and Li4-DHNDC [2] on the cycling behavior of Li-O2 batteries and their influence on ORR and OER processes. References 1) S. Renault, et al., PCT Patent WO 2021/148835 A1. 2) S. Renault, et al., PCT Patent WO 2021/148836 A1. Figure 1
- 9 October 2022
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2022-02 (4) , 516
Insoluble Solid Organic Catalysts for Non-Aqueous Lithium-Air Batteries
The chemistries based on the Li-O2 couple in aprotic electrolyte seem promising to provide ultrahigh-energy density values and outperform the current LIB technology. The main targeted application is to power electrified vehicles, with the hope of achieving high driving range. Unfortunately, serious side-reaction issues have plagued their development for practical applications so far. For example, during the discharge process, undesired insulating products are formed instead of lithium peroxide. Moreover, the blocking/clogging effect on the air electrode due to a deposition process leads to an overpotential during both the discharge (Oxygen Reduction Reaction: ORR) and charge processes (Oxygen Evolution Reaction: OER), which results in electrode degradation, electrolyte decomposition and precocious cell failure. A promising strategy to reduce these overpotentials is the use of organic redox mediators by taking advantage of their tunability. For several years, our group has been developing lithiated organic materials with average redox potentials close to the O2/Li2O2 redox couple (2.96 V vs Li+/Li0). We here report the effect of Li2DAnT (alone or in combination with Li4-p-DHT [1]) and Li4-DHNDC [2] on the cycling behavior of Li-O2 batteries and their influence on ORR and OER processes. References 1) S. Renault, et al., PCT Patent WO 2021/148835 A1. 2) S. Renault, et al., PCT Patent WO 2021/148836 A1. Figure 1
- Open Access
- 25 March 2022
- Published by Wiley in Batteries & Supercaps
- Vol. 5 (7)
Iongel Soft Solid Electrolytes Based on [DEME][TFSI] Ionic Liquid for Low Polarization Lithium‐O 2 Batteries
Lithium‐air/O 2 batteries are a promising battery technology for automotive applications due to their high energy density. However, many challenges need to be solved, particularly the high reactivity of the electrolyte with oxygen superoxide radicals and its low cyclability. In this work, we present a simple and fast way to prepare polymer‐based iongel soft solid electrolytes. Thermally and mechanically stable iongels are prepared by fast UV‐photopolymerisation exhibiting a high ionic conductivity (∼1.2×10 −3 S cm −1 at 25 °C). When used as solid electrolytes in lithium symmetrical cells, they can withstand a critical current density of 0.5 mA cm −2 . Performance in Li−O 2 cells showed capacities as large as 3.3 mAh cm −2 , and cycling capability of 25 cycles, exceeding results on liquid‐counterpart cells.
- 25 March 2022
- Published by Wiley in Batteries & Supercaps
- Vol. 5 (7)
Open AccessIongel Soft Solid Electrolytes Based on [DEME][TFSI] Ionic Liquid for Low Polarization Lithium‐O 2 Batteries
Lithium‐air/O 2 batteries are a promising battery technology for automotive applications due to their high energy density. However, many challenges need to be solved, particularly the high reactivity of the electrolyte with oxygen superoxide radicals and its low cyclability. In this work, we present a simple and fast way to prepare polymer‐based iongel soft solid electrolytes. Thermally and mechanically stable iongels are prepared by fast UV‐photopolymerisation exhibiting a high ionic conductivity (∼1.2×10 −3 S cm −1 at 25 °C). When used as solid electrolytes in lithium symmetrical cells, they can withstand a critical current density of 0.5 mA cm −2 . Performance in Li−O 2 cells showed capacities as large as 3.3 mAh cm −2 , and cycling capability of 25 cycles, exceeding results on liquid‐counterpart cells.
- 19 October 2021
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2021-02 (1) , 139
Development of Effective, Safer and Fast UV-Cured Solid Gel Polymer Electrolytes for Lithium-O2 Rechargeable Batteries
- 19 October 2021
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2021-02 (1) , 139
Development of Effective, Safer and Fast UV-Cured Solid Gel Polymer Electrolytes for Lithium-O2 Rechargeable Batteries
- 4 January 2021
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 4 (1) , 295-302
Single- Versus Dual-Ion UV-Cross-Linked Gel Polymer Electrolytes for Li–O2 Batteries
- 4 January 2021
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 4 (1) , 295-302
Single- Versus Dual-Ion UV-Cross-Linked Gel Polymer Electrolytes for Li–O2 Batteries
- 31 October 2017
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 29 (21) , 9292-9299
Synthesis, Structure, and Electrochemical Properties of LiFeV2O7
- 31 October 2017
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 29 (21) , 9292-9299
Synthesis, Structure, and Electrochemical Properties of LiFeV2O7