GKGaye Kaya

Gaye Kaya

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gaye Kaya has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Karbon/Kenevir/Polipropilen Hibrit Kompozitlerde Katman Diziliminin Mekanik ve Hasar Davranışına Etkisi

    by Burak Öztaş, Gaye Kaya, Banu Yılmaz Akyürek, Tuğrul Aksoy

    Bu çalışmada Karbon/Kenevir/Polipropilen dokuma kumaş takviyeli hibrit kompozitlerde katman diziliminin mekanik davranış ve hasar gelişimi üzerindeki etkileri incelenmiştir. Hibrit kompozitlerin özellikleri, atkı ve çözgü yönlerinde gerçekleştirilen 3-nokta eğme ve çentiksiz Charpy darbe testleri ile belirlenmiştir. Eğme testi sonrası kompozit yapılarda oluşan iç hasarların belirlenmesi amacıyla ultrasonik C-tarama analizleri uygulanmıştır. Karbon kumaş katmanlarının dış yüzeylerde yer aldığı dizilimlerde eğme dayanımı ve eğme modülü değerleri artmıştır. Buna karşılık, Kenevir/Polipropilen katmanlarının dış yüzeylerde bulunduğu kompozitlerde ise deformasyonda artış ve daha sünek bir davranış gözlenmiştir. Eğme yükü altında, çekme ve basma gerilmeleri kompozit yapının dış yüzeylerinde oluştuğundan, dış katmanlarda bulunan lif türü eğme dayanımı üzerinde belirleyici bir rol oynamıştır. Ultrasonik analizler, hasar alanlarının katman dizilimine ve atkı/çözgü yönlerinde bulunan lif türlerine bağlı olarak değiştiğini ortaya koymuştur. Bulgular, hibrit dokuma kompozitlerin tasarımında katman diziliminin mekanik performans ve hasar davranışı üzerinde belirleyici bir parametre olduğunu göstermiştir.

  • Impact damage evolution of 3D spacer woven composites with tailored core cell geometries and face sheet architectures

    by Ahmet Gökhan Özdemir, Gaye Kaya

    This study aims to enhance the impact damage resistance of 3D spacer woven composites. The novelty of this study is tailoring both core cell geometry and face sheet architecture of 3D spacer woven composites. The 3D square spacer composites exhibited superior impact resistance compared to the 3D triangular spacer composites at both 20 J and 40 J energy levels. This behaviour was attributed to the increased resilience and more flexible response of the 3D square spacer core structure. The impact resistance of the 3D spacer composites also increased with the reinforcement of 2D woven composites. The lowest deformation was achieved for the composites reinforced with satin 2D woven composites, which was related to the higher stiffness provided by the low-crimp satin weave under impact load, compared to the plain and twill weaves.

  • Impact Damage Response of Multilayered 3D Hybrid Woven Composites

    by Kazım Kekil, Gaye Kaya

    This study aims to improve the impact damage resistance of multilayered 3D hybrid woven composites. The novelty of the research lies in the development of multilayered 3D hybrid woven preforms with reduced crimp by varying Z‐yarn interlacing densities. The impact damage response of multilayered 3D woven composites was evaluated and compared with that of 2D woven composites using the ultrasonic C‐Scan. The multilayered 3D woven composites with lower Z‐yarn interlacing density demonstrated superior impact resistance compared to their 2D counterparts. In these composites, an increase in Z‐yarn interlacing density resulted in reduced impact resistance due to the higher crimp ratio. Additionally, the interlacing mechanism played a crucial role in restricting damage propagation within the structure, thereby enhancing the structural integrity of the multilayered 3D woven composites.


  • INNOVATIVE UPCYCLE OF DENIM GARMENT WASHING SOLID WASTE FOR SUSTAINABLE COMPOSITES

    by Gaye Kaya, Elif Gözde Saraç, Erhan Öner

    This study aims to contribute to circularity of denim garment washing solid waste by transforming the waste into high-value composite materials to use for thermal and sound insulation purposes. The solid waste comprising cellulose fibres and degraded pumice stone was incorporated at reinforcement ratios of 5%, 10%, and 20% by weight into PU foam matrix. The resulting composites underwent rigorous evaluation for sound and thermal insulation efficiency, flexural strength, and flame retardancy. The incorporation of the solid waste reduced the foam cell size while increasing the cell density, creating an enhanced acoustic and thermal insulation performance. The silica-rich pumice stone content further imparted flame-retardant properties, effectively delaying ignition and combustion. Experimental evaluations demonstrated that 20% wt. reinforced PU foams achieved a 19% reduction in thermal conductivity and a 75% decrease in flame duration, while 5% wt. reinforcement provided up to 99% sound absorption in the 1000 Hz-1600 Hz frequency range. These findings emphasize the functional upcycling of denim waste into insulation composites with improved thermal, acoustic, and flame-retardant properties, contributing significantly to sustainability and circularity.

  • Open Access

    SOUND AND THERMAL INSULATION PROPERTIES OF SANDWICH COMPOSITES MADE OF WASTE KEVLAR® MATERIALS

    by Erdem Selver, Gaye Kaya, Tebernuş Tiyek, Arzu Atıcı

    This paper examines the thermal and acoustic insulation characteristics of sandwich composites with waste Kevlar® fiber-reinforced face materials and polyurethane/paper cardboard cores. Waste Kevlar® short fibers (carding waste) were reinforced into the sandwich composites’ core part in varying ratios (2%, 5%, and 10%). Kevlar® fabric edge waste (waste of weaving process) was used to produce the face materials of sandwich composites. Sandwich composites were also stitched using Kevlar® yarns to observe the effect of the through-thickness reinforcement on sound and thermal insulation properties. The sound insulation test results showed that reinforcement of short Kevlar® fibers into the core parts of sandwich composites somewhat raised their sound absorption coefficients. Because the stitching holes created air spaces for sound vibrations, the sound absorption coefficient values improved. The sound transmission losses of sandwich composites were also increased up to 30 dB after short Kevlar® fiber addition. The thermal conductivity coefficient of sandwich composites decreased, indicating that the addition of Kevlar® fibers increased their insulation properties.


  • Self-healing potential of stitched glass/polypropylene/epoxy hybrid composites with various fibers

    by Gaye Kaya, Erdem Selver

    This study compares the impact damage response and self-healing potential of unstitched and stitched glass/polypropylene (PP) fiber reinforced thermoset composite structures. The novelty of this study is weaving preforms with an intra-ply hybridization of glass and thermoplastic PP fibers and stitching these preforms with a unique stitching pattern by considering the effect of stitching fiber types (PP, Kevlar®, Dyneema®, carbon and silk) on impact damage response and self-healing potential of composites. The mechanical properties of the stitching fiber influenced the composite’s behavior against impact and compressive loads. The unstitched composite deflected more than stitched composites under the same impact energy levels due to delaying of delamination via stitching process. The stitching process reduced the damage areas of composites subjected to 30 J and 60 J impact energies by 57 and 86%, respectively. Structural healing significantly decreased the damaged areas of both unstitched and stitched composite structures up to 87%, while it was more effective on stitched composites. The polypropylene melted and accumulated along the path of the stitch pattern, regardless of whether the stitching fiber was thermoplastic. Due to the reduced impacted area, compression after impact (CAI) strength retention of the stitched composite materials increased by up to 94%.


  • Open Access

    INFLUENCES OF ALKALI PRETREATMENT ON LYOCELL WOVEN FABRIC PROPERTIES AFTER ABRASION

    by Arzu Atici, Gaye Kaya

    In this study, alkali pretreatment in various concentrations were applied to Lyocell woven fabrics to decrease the fibrillation tendency of fibers and the influences of alkali pretreatment on tensile and tearing properties of Lyocell fabrics after abrasion were investigated. Alkali pretreatment reduced fibrillation of Lyocell fibers. However, fabric shrinkage occurred because of the increased volume and damaged twisted structure of yarns due to the lateral fiber swelling. The warp/weft densities and crimp ratios increased as the alkali concentrations increased. The breaking and tearing loads of untreated Lyocell fabrics were higher than those of alkali pretreated fabrics since the strength loss caused by alkali pretreatment. The abrasive load caused fiber breakages and fiber entanglements on fabrics and decreased the both breaking and tearing loads. The weave types with long floating interlacements on the fabric surface were more severely damaged by exposing to abrasive load and resulted as higher strength reduction.

  • Open Access

    Impact and Post-Impact Damage Response of Interlayer Nonwoven Reinforced Hybrid Composites

    by Tebernuş Tiyek, Gaye Kaya

    This study aims to increase the ductility and the damage tolerance capability of composite structures with interlayer nonwoven reinforcement. The novelty of this study stems from its innovative approach: a comprehensive examination of the arrangement of warp and weft fibres, as well as the preform layer, coupled with both intra-layer and inter-layer hybridization, all while accounting for the incorporation of nonwoven reinforcement. The flexural, compressive, impact and post-impact compressive strengths of unreinforced and interlayer nonwoven reinforced glass/carbon/epoxy hybrid composites are carefully investigated and compared. The nonwoven reinforcement led to a reduction in flexural strength and modulus for composite structures, while enhancing their strain, thus imparting greater ductility to the structure. Both hybridization and interlayer nonwoven reinforcement increased the peak forces of composites while reducing deformations. The cracks occurring in the composite structure under load were arrested by the barrier created by the nonwoven surfaces used between the layers, which was considered an enhancement in the damage tolerance of composite structures.