Min Jun Oh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Min Jun Oh has a total of 110 co-authors. Here are the top co-authors by number of shared publications:
- Pil Jin Yoo
School of Chemical Engineering, Sungkyunkwan University (SKKU), Suwon 16419, Republic of Korea
13 shared publications - Hyun Koo
University of Pennsylvania
7 shared publications - Yuan Liu
Center for Innovation & Precision Dentistry, School of Dental Medicine, School of Engineering and Applied Science, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
6 shared publications - Daeyeon Lee
University of Pennsylvania
5 shared publications - Zhi Ren
University of Pennsylvania
5 shared publications - Edward B. Steager
Center for Innovation & Precision Dentistry School of Dental Medicine School of Engineering and Applied Science University of Pennsylvania Philadelphia Pennsylvania USA
4 shared publications
Latest Publications
- Open Access
- 11 April 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (15) , 15629-15636
Metal-Oxide-Decorated Mesoporous Silica Chemiresistors for Exhaled Biomarker Detection
A metal-oxide-decorated mesoporous silica (MOMS) chemiresistor platform enables the selective detection of disease-specific volatile organic compounds (VOCs) in exhaled breath. Functionalization of these mesoporous structures with metals and metal oxides facilitates the detection of a wide range of VOCs. To create a sensing architecture with a bicontinuous morphology that optimizes molecular diffusion and electron transport pathways, we employ physically confined polymerization-induced phase separation (PC-PIPS) to fabricate template-directed mesoporous structures with controlled film thicknesses ranging from 1 to 5 μm. Incorporation of metal oxides (SnO2, ZnO) and noble metals (Pt, Au) forms p-n heterojunctions, enhancing sensitivity and selectivity through modulation of electron depletion layers. The MOMS chemiresistors demonstrate distinct response patterns toward key biomarkers, including hydrogen sulfide (periodontal disease), toluene (gingivitis), formaldehyde (oral carcinoma), and acetone (diabetes mellitus). Response magnitudes range from 1.75-5.66 at 10 ppm to 5.56-12.13 at 100 ppm of H2S, with unique electronic signatures, enabling identification of complex gas mixtures. This scalable and versatile fabrication approach establishes MOMS chemiresistors as a promising platform for noninvasive, early-stage disease detection via breath analysis.
- 11 April 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (15) , 15629-15636
Open AccessMetal-Oxide-Decorated Mesoporous Silica Chemiresistors for Exhaled Biomarker Detection
A metal-oxide-decorated mesoporous silica (MOMS) chemiresistor platform enables the selective detection of disease-specific volatile organic compounds (VOCs) in exhaled breath. Functionalization of these mesoporous structures with metals and metal oxides facilitates the detection of a wide range of VOCs. To create a sensing architecture with a bicontinuous morphology that optimizes molecular diffusion and electron transport pathways, we employ physically confined polymerization-induced phase separation (PC-PIPS) to fabricate template-directed mesoporous structures with controlled film thicknesses ranging from 1 to 5 μm. Incorporation of metal oxides (SnO2, ZnO) and noble metals (Pt, Au) forms p-n heterojunctions, enhancing sensitivity and selectivity through modulation of electron depletion layers. The MOMS chemiresistors demonstrate distinct response patterns toward key biomarkers, including hydrogen sulfide (periodontal disease), toluene (gingivitis), formaldehyde (oral carcinoma), and acetone (diabetes mellitus). Response magnitudes range from 1.75-5.66 at 10 ppm to 5.56-12.13 at 100 ppm of H2S, with unique electronic signatures, enabling identification of complex gas mixtures. This scalable and versatile fabrication approach establishes MOMS chemiresistors as a promising platform for noninvasive, early-stage disease detection via breath analysis.
- Open Access
- 13 January 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (3) , 3265-3281
Robotic Microcapsule Assemblies with Adaptive Mobility for Targeted Treatment of Rugged Biological Microenvironments
Microrobots are poised to transform biomedicine by enabling precise, noninvasive procedures. However, current magnetic microrobots, composed of solid monolithic particles, present fundamental challenges in engineering intersubunit interactions, limiting their collective effectiveness in navigating irregular biological terrains and confined spaces. To address this, we design hierarchically assembled microrobots with multiaxis mobility and collective adaptability by engineering the potential magnetic interaction energy between subunits to create stable, self-reconfigurable structures capable of carrying and protecting cargo internally. Using double emulsion templates and magnetic control techniques, we confine 10 nm iron oxide and 15 nm silica nanoparticles within the shell of 100 μm microcapsules that form multiunit robotic collectives. Unexpectedly, we find that asymmetric localization of iron oxide nanoparticles in the microcapsules enhances the intercapsule potential energy, creating stable connections under rotating magnetic fields without altering the magnetic susceptibility. These robotic microcapsule collectives exhibit emergent behaviors, self-reconfiguring into kinematic chain-like structures to traverse complex obstacles, arched confinements, and adhesive, rugged biological tissues that typically impede microscale systems. By harnessing these functions, we demonstrate targeted antifungal delivery using a localized biofilm model on mucosal tissues, showing effective killing ofCandida without binding or causing physical damage to host cells. Our findings show how hierarchical assembly can produce cargo-carrying microrobots with collective, self-adaptive mobility for traversing complex biological environments, advancing targeted delivery for biomedical applications.
- 13 January 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (3) , 3265-3281
Open AccessRobotic Microcapsule Assemblies with Adaptive Mobility for Targeted Treatment of Rugged Biological Microenvironments
Microrobots are poised to transform biomedicine by enabling precise, noninvasive procedures. However, current magnetic microrobots, composed of solid monolithic particles, present fundamental challenges in engineering intersubunit interactions, limiting their collective effectiveness in navigating irregular biological terrains and confined spaces. To address this, we design hierarchically assembled microrobots with multiaxis mobility and collective adaptability by engineering the potential magnetic interaction energy between subunits to create stable, self-reconfigurable structures capable of carrying and protecting cargo internally. Using double emulsion templates and magnetic control techniques, we confine 10 nm iron oxide and 15 nm silica nanoparticles within the shell of 100 μm microcapsules that form multiunit robotic collectives. Unexpectedly, we find that asymmetric localization of iron oxide nanoparticles in the microcapsules enhances the intercapsule potential energy, creating stable connections under rotating magnetic fields without altering the magnetic susceptibility. These robotic microcapsule collectives exhibit emergent behaviors, self-reconfiguring into kinematic chain-like structures to traverse complex obstacles, arched confinements, and adhesive, rugged biological tissues that typically impede microscale systems. By harnessing these functions, we demonstrate targeted antifungal delivery using a localized biofilm model on mucosal tissues, showing effective killing ofCandida without binding or causing physical damage to host cells. Our findings show how hierarchical assembly can produce cargo-carrying microrobots with collective, self-adaptive mobility for traversing complex biological environments, advancing targeted delivery for biomedical applications.
- Open Access
- 29 April 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 12 (20) , 4935-4944
Drug-loaded adhesive microparticles for biofilm prevention on oral surfaces
This study introduces dendritic microparticles from PLGA and PLGA- b -PEG for oral antifungal delivery. They adhere to oral surfaces, offer sustained release, and prevent biofilms, while being biodegradable, promising for treating oral infections.
- 29 April 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 12 (20) , 4935-4944
Open AccessDrug-loaded adhesive microparticles for biofilm prevention on oral surfaces
This study introduces dendritic microparticles from PLGA and PLGA- b -PEG for oral antifungal delivery. They adhere to oral surfaces, offer sustained release, and prevent biofilms, while being biodegradable, promising for treating oral infections.
- Open Access
- 13 November 2023
- Published by Elsevier in Trends in Biotechnology
- Vol. 42 (4) , 479-495
Targeting biofilm infections in humans using small scale robotics
- 13 November 2023
- Published by Elsevier in Trends in Biotechnology
- Vol. 42 (4) , 479-495
Open AccessTargeting biofilm infections in humans using small scale robotics
- Open Access
- 29 September 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-16
Iron oxide nanozymes stabilize stannous fluoride for targeted biofilm killing and synergistic oral disease prevention
Dental caries is the most common human disease caused by oral biofilms despite the widespread use of fluoride as the primary anticaries agent. Recently, an FDA-approved iron oxide nanoparticle (ferumoxytol, Fer) has shown to kill and degrade caries-causing biofilms through catalytic activation of hydrogen peroxide. However, Fer cannot interfere with enamel acid demineralization. Here, we show notable synergy when Fer is combined with stannous fluoride (SnF2), markedly inhibiting both biofilm accumulation and enamel damage more effectively than either alone. Unexpectedly, we discover that the stability of SnF2 is enhanced when mixed with Fer in aqueous solutions while increasing catalytic activity of Fer without any additives. Notably, Fer in combination with SnF2 is exceptionally effective in controlling dental caries in vivo, even at four times lower concentrations, without adverse effects on host tissues or oral microbiome. Our results reveal a potent therapeutic synergism using approved agents while providing facile SnF2 stabilization, to prevent a widespread oral disease with reduced fluoride exposure.
- 29 September 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-16
Open AccessIron oxide nanozymes stabilize stannous fluoride for targeted biofilm killing and synergistic oral disease prevention
Dental caries is the most common human disease caused by oral biofilms despite the widespread use of fluoride as the primary anticaries agent. Recently, an FDA-approved iron oxide nanoparticle (ferumoxytol, Fer) has shown to kill and degrade caries-causing biofilms through catalytic activation of hydrogen peroxide. However, Fer cannot interfere with enamel acid demineralization. Here, we show notable synergy when Fer is combined with stannous fluoride (SnF2), markedly inhibiting both biofilm accumulation and enamel damage more effectively than either alone. Unexpectedly, we discover that the stability of SnF2 is enhanced when mixed with Fer in aqueous solutions while increasing catalytic activity of Fer without any additives. Notably, Fer in combination with SnF2 is exceptionally effective in controlling dental caries in vivo, even at four times lower concentrations, without adverse effects on host tissues or oral microbiome. Our results reveal a potent therapeutic synergism using approved agents while providing facile SnF2 stabilization, to prevent a widespread oral disease with reduced fluoride exposure.
- Open Access
- 8 July 2023
- Published by Wiley in Advanced Materials
- Vol. 36 (10) , e2300320
Nanozyme‐Based Robotics Approach for Targeting Fungal Infection
Fungal pathogens have been designated by the World Health Organization as microbial threats of the highest priority for global health. It remains a major challenge to improve antifungal efficacy at the site of infection while avoiding off‐target effects, fungal spreading, and drug tolerance. Here, a nanozyme‐based microrobotic platform is developed that directs localized catalysis to the infection site with microscale precision to achieve targeted and rapid fungal killing. Using electromagnetic field frequency modulation and fine‐scale spatiotemporal control, structured iron oxide nanozyme assemblies are formed that display tunable dynamic shape transformation and catalysis activation. The catalytic activity varies depending on the motion, velocity, and shape providing controllable reactive oxygen species (ROS) generation. Unexpectedly, nanozyme assemblies bind avidly to fungal (Candida albicans) surfaces to enable concentrated accumulation and targeted ROS‐mediated killing in situ. By exploiting these tunable properties and selective binding to fungi, localized antifungal activity is achieved using in vivo‐like cell spheroid and animal tissue infection models. Structured nanozyme assemblies are directed to Candida‐infected sites using programmable algorithms to perform precisely guided spatial targeting and on‐site catalysis resulting in fungal eradication within 10 min. This nanozyme‐based microrobotics approach provides a uniquely effective and targeted therapeutic modality for pathogen elimination at the infection site.
- 8 July 2023
- Published by Wiley in Advanced Materials
- Vol. 36 (10) , e2300320
Open AccessNanozyme‐Based Robotics Approach for Targeting Fungal Infection
Fungal pathogens have been designated by the World Health Organization as microbial threats of the highest priority for global health. It remains a major challenge to improve antifungal efficacy at the site of infection while avoiding off‐target effects, fungal spreading, and drug tolerance. Here, a nanozyme‐based microrobotic platform is developed that directs localized catalysis to the infection site with microscale precision to achieve targeted and rapid fungal killing. Using electromagnetic field frequency modulation and fine‐scale spatiotemporal control, structured iron oxide nanozyme assemblies are formed that display tunable dynamic shape transformation and catalysis activation. The catalytic activity varies depending on the motion, velocity, and shape providing controllable reactive oxygen species (ROS) generation. Unexpectedly, nanozyme assemblies bind avidly to fungal (Candida albicans) surfaces to enable concentrated accumulation and targeted ROS‐mediated killing in situ. By exploiting these tunable properties and selective binding to fungi, localized antifungal activity is achieved using in vivo‐like cell spheroid and animal tissue infection models. Structured nanozyme assemblies are directed to Candida‐infected sites using programmable algorithms to perform precisely guided spatial targeting and on‐site catalysis resulting in fungal eradication within 10 min. This nanozyme‐based microrobotics approach provides a uniquely effective and targeted therapeutic modality for pathogen elimination at the infection site.
- Open Access
- 3 April 2023
- Published by Springer Nature in Research Square
Iron oxide nanozymes stabilize stannous fluoride for targeted biofilm killing and synergistic oral disease prevention
Dental caries (tooth decay) is the most prevalent human disease caused by oral biofilms, affecting nearly half of the global population despite increased use of fluoride, the mainstay anticaries (tooth-enamel protective) agent. Recently, an FDA-approved iron oxide nanozyme formulation (ferumoxytol, Fer) has been shown to disrupt caries-causing biofilms with high specificity via catalytic activation of hydrogen peroxide, but it is incapable of interfering with enamel acid demineralization. Here, we find notable synergy when Fer is combined with stannous fluoride (SnF2), markedly inhibiting both biofilm accumulation and enamel damage more effectively than either alone. Unexpectedly, our data show that SnF2 enhances the catalytic activity of Fer, significantly increasing reactive oxygen species (ROS) generation and antibiofilm activity. We discover that the stability of SnF2 (unstable in water) is markedly enhanced when mixed with Fer in aqueous solutions without any additives. Further analyses reveal that Sn2+ is bound by carboxylate groups in the carboxymethyl-dextran coating of Fer, thus stabilizing SnF2 and boosting the catalytic activity. Notably, Fer in combination with SnF2 is exceptionally effective in controlling dental caries in vivo, preventing enamel demineralization and cavitation altogether without adverse effects on the host tissues or causing changes in the oral microbiome diversity. The efficacy of SnF2 is also enhanced when combined with Fer, showing comparable therapeutic effects at four times lower fluoride concentration. Enamel ultrastructure examination shows that fluoride, iron, and tin are detected in the outer layers of the enamel forming a polyion-rich film, indicating co-delivery onto the tooth surface. Overall, our results reveal a unique therapeutic synergism using approved agents that target complementary biological and physicochemical traits, while providing facile SnF2 stabilization, to prevent a widespread oral disease more effectively with reduced fluoride exposure.
- 3 April 2023
- Published by Springer Nature in Research Square
Open AccessIron oxide nanozymes stabilize stannous fluoride for targeted biofilm killing and synergistic oral disease prevention
Dental caries (tooth decay) is the most prevalent human disease caused by oral biofilms, affecting nearly half of the global population despite increased use of fluoride, the mainstay anticaries (tooth-enamel protective) agent. Recently, an FDA-approved iron oxide nanozyme formulation (ferumoxytol, Fer) has been shown to disrupt caries-causing biofilms with high specificity via catalytic activation of hydrogen peroxide, but it is incapable of interfering with enamel acid demineralization. Here, we find notable synergy when Fer is combined with stannous fluoride (SnF2), markedly inhibiting both biofilm accumulation and enamel damage more effectively than either alone. Unexpectedly, our data show that SnF2 enhances the catalytic activity of Fer, significantly increasing reactive oxygen species (ROS) generation and antibiofilm activity. We discover that the stability of SnF2 (unstable in water) is markedly enhanced when mixed with Fer in aqueous solutions without any additives. Further analyses reveal that Sn2+ is bound by carboxylate groups in the carboxymethyl-dextran coating of Fer, thus stabilizing SnF2 and boosting the catalytic activity. Notably, Fer in combination with SnF2 is exceptionally effective in controlling dental caries in vivo, preventing enamel demineralization and cavitation altogether without adverse effects on the host tissues or causing changes in the oral microbiome diversity. The efficacy of SnF2 is also enhanced when combined with Fer, showing comparable therapeutic effects at four times lower fluoride concentration. Enamel ultrastructure examination shows that fluoride, iron, and tin are detected in the outer layers of the enamel forming a polyion-rich film, indicating co-delivery onto the tooth surface. Overall, our results reveal a unique therapeutic synergism using approved agents that target complementary biological and physicochemical traits, while providing facile SnF2 stabilization, to prevent a widespread oral disease more effectively with reduced fluoride exposure.
- 23 August 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 14 (35) , 12581-12588
Controlled synthesis of solid-shelled non-spherical and faceted microbubbles
The ability to control the shape of hollow particles (e.g., capsules or bubbles) holds great promise for enhancing the encapsulation efficiency and mechanical/optical properties. However, conventional preparation methods suffer from a low yield, difficulty in controlling the shape, and a tedious production process, limiting their widespread application. Here, we present a method for fabricating polyhedral graphene oxide (GO)-shelled microbubbles with sharp edges and vertices, which is based on the microfluidic generation of spherical compound bubbles followed by shell deformation. Sphere-to-polytope deformation is a result of the shell instability due to gradual outward gas transport, which is dictated by Laplace pressure across the shell. The shape-variant behaviours of the bubbles can also be attributed to the compositional heterogeneity of the shells. In particular, the high degree of control of microfluidic systems enables the formation of non-spherical bubbles with various shapes; the structural motifs of the bubbles are easily controlled by varying the size and thickness of the mid-shell in compound bubbles, ranging from tetrahedra to octahedra. The strategy presented in this study provides a new route for fabricating 3D structured solid bubbles, which is particularly advantageous for the development of high-performance mechanical or thermal material applications.
- 23 August 2022
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 14 (35) , 12581-12588
Controlled synthesis of solid-shelled non-spherical and faceted microbubbles
The ability to control the shape of hollow particles (e.g., capsules or bubbles) holds great promise for enhancing the encapsulation efficiency and mechanical/optical properties. However, conventional preparation methods suffer from a low yield, difficulty in controlling the shape, and a tedious production process, limiting their widespread application. Here, we present a method for fabricating polyhedral graphene oxide (GO)-shelled microbubbles with sharp edges and vertices, which is based on the microfluidic generation of spherical compound bubbles followed by shell deformation. Sphere-to-polytope deformation is a result of the shell instability due to gradual outward gas transport, which is dictated by Laplace pressure across the shell. The shape-variant behaviours of the bubbles can also be attributed to the compositional heterogeneity of the shells. In particular, the high degree of control of microfluidic systems enables the formation of non-spherical bubbles with various shapes; the structural motifs of the bubbles are easily controlled by varying the size and thickness of the mid-shell in compound bubbles, ranging from tetrahedra to octahedra. The strategy presented in this study provides a new route for fabricating 3D structured solid bubbles, which is particularly advantageous for the development of high-performance mechanical or thermal material applications.
- Open Access
- 28 June 2022
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 16 (8) , 11998-12012
Surface Topography-Adaptive Robotic Superstructures for Biofilm Removal and Pathogen Detection on Human Teeth
The eradication of biofilms remains an unresolved challenge across disciplines. Furthermore, in biomedicine, the sampling of spatially heterogeneous biofilms is crucial for accurate pathogen detection and precise treatment of infection. However, current approaches are incapable of removing highly adhesive biostructures from topographically complex surfaces. To meet these needs, we demonstrate magnetic field-directed assembly of nanoparticles into surface topography-adaptive robotic superstructures (STARS) for precision-guided biofilm removal and diagnostic sampling. These structures extend or retract at multilength scales (micro-to-centimeter) to operate on opposing surfaces and rapidly adjust their shape, length, and stiffness to adapt and apply high-shear stress. STARS conform to complex surface topographies by entering angled grooves or extending into narrow crevices and "scrub" adherent biofilm with multiaxis motion while producing antibacterial reagents on-site. Furthermore, as the superstructure disrupts the biofilm, it captures bacterial, fungal, viral, and matrix components, allowing sample retrieval for multiplexed diagnostic analysis. We apply STARS using automated motion patterns to target complex three-dimensional geometries of ex vivo human teeth to retrieve biofilm samples with microscale precision, while providing "toothbrushing-like" and "flossing-like" action with antibacterial activity in real-time to achieve mechanochemical removal and multikingdom pathogen detection. This approach could lead to autonomous, multifunctional antibiofilm platforms to advance current oral care modalities and other fields contending with harmful biofilms on hard-to-reach surfaces.
- 28 June 2022
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 16 (8) , 11998-12012
Open AccessSurface Topography-Adaptive Robotic Superstructures for Biofilm Removal and Pathogen Detection on Human Teeth
The eradication of biofilms remains an unresolved challenge across disciplines. Furthermore, in biomedicine, the sampling of spatially heterogeneous biofilms is crucial for accurate pathogen detection and precise treatment of infection. However, current approaches are incapable of removing highly adhesive biostructures from topographically complex surfaces. To meet these needs, we demonstrate magnetic field-directed assembly of nanoparticles into surface topography-adaptive robotic superstructures (STARS) for precision-guided biofilm removal and diagnostic sampling. These structures extend or retract at multilength scales (micro-to-centimeter) to operate on opposing surfaces and rapidly adjust their shape, length, and stiffness to adapt and apply high-shear stress. STARS conform to complex surface topographies by entering angled grooves or extending into narrow crevices and "scrub" adherent biofilm with multiaxis motion while producing antibacterial reagents on-site. Furthermore, as the superstructure disrupts the biofilm, it captures bacterial, fungal, viral, and matrix components, allowing sample retrieval for multiplexed diagnostic analysis. We apply STARS using automated motion patterns to target complex three-dimensional geometries of ex vivo human teeth to retrieve biofilm samples with microscale precision, while providing "toothbrushing-like" and "flossing-like" action with antibacterial activity in real-time to achieve mechanochemical removal and multikingdom pathogen detection. This approach could lead to autonomous, multifunctional antibiofilm platforms to advance current oral care modalities and other fields contending with harmful biofilms on hard-to-reach surfaces.
- 10 April 2022
- Published by Wiley in Advanced Materials Technologies
- Vol. 7 (7)
A 3D‐Printed Customizable Platform for Multiplex Dynamic Biofilm Studies
Biofilms are communities of microbes that colonize surfaces. While several biofilm experimental models exist, they often have limited replications of spatiotemporal dynamics surrounding biofilms. For a better understanding dynamic and complex biofilm development, this manuscript presents a customizable platform compatible with off‐the‐shelf well plates that can monitor microbial adhesion, growth, and associated parameters under various relevant scenarios by taking advantage of 3D printing. The system i) holds any substrate in a stable, vertical position, ii) subjects samples to flow at different angles, iii) switches between static and dynamic modes during an experiment, and iv) allows multiplexing and real‐time monitoring of biofilm parameters. Simulated fluid dynamics is employed to estimate flow patterns around discs and shear stresses at disc surfaces. A 3D printed peristaltic pump and a customized pH measurement system for real‐time tracking of spent biofilm culture media are equipped with a graphical user interface that grants control over all experimental parameters. The system is tested under static and dynamic conditions with Streptococcus mutans using different carbon sources. By monitoring the effluent pH and characterizing biochemical, microbiological, and morphological properties of cultured biofilms, distinct properties are demonstrated. This novel platform liberates designing experimental strategies for investigations of biofilms under various conditions.
- 10 April 2022
- Published by Wiley in Advanced Materials Technologies
- Vol. 7 (7)
A 3D‐Printed Customizable Platform for Multiplex Dynamic Biofilm Studies
Biofilms are communities of microbes that colonize surfaces. While several biofilm experimental models exist, they often have limited replications of spatiotemporal dynamics surrounding biofilms. For a better understanding dynamic and complex biofilm development, this manuscript presents a customizable platform compatible with off‐the‐shelf well plates that can monitor microbial adhesion, growth, and associated parameters under various relevant scenarios by taking advantage of 3D printing. The system i) holds any substrate in a stable, vertical position, ii) subjects samples to flow at different angles, iii) switches between static and dynamic modes during an experiment, and iv) allows multiplexing and real‐time monitoring of biofilm parameters. Simulated fluid dynamics is employed to estimate flow patterns around discs and shear stresses at disc surfaces. A 3D printed peristaltic pump and a customized pH measurement system for real‐time tracking of spent biofilm culture media are equipped with a graphical user interface that grants control over all experimental parameters. The system is tested under static and dynamic conditions with Streptococcus mutans using different carbon sources. By monitoring the effluent pH and characterizing biochemical, microbiological, and morphological properties of cultured biofilms, distinct properties are demonstrated. This novel platform liberates designing experimental strategies for investigations of biofilms under various conditions.