Daxing Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Daxing Huang has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Fazhu Ding
Chinese Academy of Sciences
15 shared publications - Hongwei Gu
Key Laboratory of Applied Superconductivity and Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190, China
12 shared publications Hongjing Shang
Chinese Academy of Sciences
6 shared publicationsHongwei Gu
Chinese Academy of Sciences
6 shared publicationsHao Dong
Key Laboratory of Applied Superconductivity and Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190, China
5 shared publicationsTongxin Wang
Key Laboratory of Applied Superconductivity and Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190, China
5 shared publications
Latest Publications
- 1 November 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (11) , 115006
Unique roles of PVP-derived carbon dopant in tailoring microstructure and elevating high-field J c and H c2 for pressure-assisted infiltration-processed MgB 2 bulks
The rapid decay of the critical current density ( J c ) of MgB 2 in high magnetic fields remains a major barrier to its practical use. Although carbon doping is an established strategy to strengthen flux pinning and enhance the upper critical field ( H c2 ), conventional carbon dopants are prone to agglomeration, which can deteriorate intergrain connectivity and reduce the effective cross-sectional area available for current transport. Herein, polyvinylpyrrolidone (PVP) is verified as a superior organic carbon precursor, and pressure-assisted Mg infiltration is adopted to fabricate PVP- doped MgB 2 bulks. Benefiting from PVP pyrolysis, in-situ introduced carbon triggers evident lattice contraction and remarkable grain refinement alongside heterogeneous carbon-enriched domains inside the matrix: partial PVP-derived carbon atoms substitute boron lattice sites, whereas residual carbon-rich precipitates refine crystalline grains and serve as abundant extrinsic flux-pinning centers. More importantly, PVP decomposition intermediates effectively suppress the generation of MgO impurity during sintering and lower the MgO phase proportion, an exclusive merit unavailable for many inorganic carbon dopants. Owing to above merits, high-field superconducting properties are markedly improved, and the 10 wt% PVP-doped sample presents the best performance. At 20 K and 5 T, its critical current density reaches 1.46 × 10 3 A cm −2 , approximately 8.5 times that of the undoped counterpart; at 5 K under 7 T, the value rises to 2.01 × 10 4 A cm −2 , nearly an order of magnitude superior to the pristine sample. Meanwhile, this optimal specimen delivers an irreversibility field of 9.58 T and an upper critical field of 12.05 T at 20 K. These results demonstrate that PVP serves as a high-efficiency and versatile organic carbon precursor for prominently boosting the high-field superconducting performances of MgB 2 bulks. This facile and feasible PVP doping strategy can effectively integrate impurity suppression, flux pinning reinforcement and well-preserved grain connectivity, overcoming the performance bottlenecks of conventional carbon modification methods.
- 1 November 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (11) , 115006
Unique roles of PVP-derived carbon dopant in tailoring microstructure and elevating high-field J c and H c2 for pressure-assisted infiltration-processed MgB 2 bulks
The rapid decay of the critical current density ( J c ) of MgB 2 in high magnetic fields remains a major barrier to its practical use. Although carbon doping is an established strategy to strengthen flux pinning and enhance the upper critical field ( H c2 ), conventional carbon dopants are prone to agglomeration, which can deteriorate intergrain connectivity and reduce the effective cross-sectional area available for current transport. Herein, polyvinylpyrrolidone (PVP) is verified as a superior organic carbon precursor, and pressure-assisted Mg infiltration is adopted to fabricate PVP- doped MgB 2 bulks. Benefiting from PVP pyrolysis, in-situ introduced carbon triggers evident lattice contraction and remarkable grain refinement alongside heterogeneous carbon-enriched domains inside the matrix: partial PVP-derived carbon atoms substitute boron lattice sites, whereas residual carbon-rich precipitates refine crystalline grains and serve as abundant extrinsic flux-pinning centers. More importantly, PVP decomposition intermediates effectively suppress the generation of MgO impurity during sintering and lower the MgO phase proportion, an exclusive merit unavailable for many inorganic carbon dopants. Owing to above merits, high-field superconducting properties are markedly improved, and the 10 wt% PVP-doped sample presents the best performance. At 20 K and 5 T, its critical current density reaches 1.46 × 10 3 A cm −2 , approximately 8.5 times that of the undoped counterpart; at 5 K under 7 T, the value rises to 2.01 × 10 4 A cm −2 , nearly an order of magnitude superior to the pristine sample. Meanwhile, this optimal specimen delivers an irreversibility field of 9.58 T and an upper critical field of 12.05 T at 20 K. These results demonstrate that PVP serves as a high-efficiency and versatile organic carbon precursor for prominently boosting the high-field superconducting performances of MgB 2 bulks. This facile and feasible PVP doping strategy can effectively integrate impurity suppression, flux pinning reinforcement and well-preserved grain connectivity, overcoming the performance bottlenecks of conventional carbon modification methods.
- 3 June 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (6)
Deciphering the dual-role of polycarbosilane in MgB2: Flux pinning mechanism and precision microstructural control for high Jc
To meet the stringent demands of high-field applications such as MRI and superconducting motors, enhancing the Jc of MgB2 bulks is imperative.Herein, we report a facile and cost-effective Mg infiltration strategy for fabricating high-density MgB2 bulks,wherein Polycarbosilane(PCS) serves as a dual-source precursor to simultaneously introduce C and Si—two key elements for tuning superconducting performance.To provide further insights into the flux pinning behavior and to explore a more effective microstructural control strategy for mitigating the trade-off between flux pinning enhancement and grain connectivity in MgB2,three distinct processing protocols were deliberately adopted for sample fabrication.Systematic thermal analysis and X-ray diffraction characterizations reveal that PCS undergoes thermal decomposition to form highly reactive amorphous SiC. This in-situ generated SiC exhibits a double-edged effect on MgB2: its exceptional reactivity enables efficient C substitution into the B lattice,while concurrently inducing the precipitation of secondary Mg2Si phases.Notably, the morphology and distribution of these secondary phases directly govern the balance between flux pinning efficiency and inter-granular connectivity,a long-standing bottleneck in MgB2 optimization.Liquid-phase ultrasonication, despite achieving molecular-level precursor mixing, leads to the formation of continuous Mg2Si networks that severely disrupt grain connectivity. In contrast, ball milling enables precise regulation of secondary phase morphology, achieving an optimal microstructure where efficient C doping is synergized with discrete, nanoscale Mg2Si particles that act as strong flux pinning centers, thereby mitigating the degradation of grain connectivity. Consequently, the 10wt% PCS-doped sample prepared via ball milling exhibited superior performance,achieving a Jc of 2.29×104 A/cm2 at 5K and 7T, markedly surpassing samples doped with commercial crystalline nano-SiC.Furthermore,efficient C substitution enhanced the Hc2 at 20K from 8.73T in the pristine sample to 10.8T.These results highlight the conflict between flux pinning enhancement and grain connectivity, elucidate the correlation between the morphology of such organic dopants and critical current capability,providing a robust strategy for optimizing infiltration-processed MgB2 superconductors.
- 3 June 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (6)
Deciphering the dual-role of polycarbosilane in MgB2: Flux pinning mechanism and precision microstructural control for high Jc
To meet the stringent demands of high-field applications such as MRI and superconducting motors, enhancing the Jc of MgB2 bulks is imperative.Herein, we report a facile and cost-effective Mg infiltration strategy for fabricating high-density MgB2 bulks,wherein Polycarbosilane(PCS) serves as a dual-source precursor to simultaneously introduce C and Si—two key elements for tuning superconducting performance.To provide further insights into the flux pinning behavior and to explore a more effective microstructural control strategy for mitigating the trade-off between flux pinning enhancement and grain connectivity in MgB2,three distinct processing protocols were deliberately adopted for sample fabrication.Systematic thermal analysis and X-ray diffraction characterizations reveal that PCS undergoes thermal decomposition to form highly reactive amorphous SiC. This in-situ generated SiC exhibits a double-edged effect on MgB2: its exceptional reactivity enables efficient C substitution into the B lattice,while concurrently inducing the precipitation of secondary Mg2Si phases.Notably, the morphology and distribution of these secondary phases directly govern the balance between flux pinning efficiency and inter-granular connectivity,a long-standing bottleneck in MgB2 optimization.Liquid-phase ultrasonication, despite achieving molecular-level precursor mixing, leads to the formation of continuous Mg2Si networks that severely disrupt grain connectivity. In contrast, ball milling enables precise regulation of secondary phase morphology, achieving an optimal microstructure where efficient C doping is synergized with discrete, nanoscale Mg2Si particles that act as strong flux pinning centers, thereby mitigating the degradation of grain connectivity. Consequently, the 10wt% PCS-doped sample prepared via ball milling exhibited superior performance,achieving a Jc of 2.29×104 A/cm2 at 5K and 7T, markedly surpassing samples doped with commercial crystalline nano-SiC.Furthermore,efficient C substitution enhanced the Hc2 at 20K from 8.73T in the pristine sample to 10.8T.These results highlight the conflict between flux pinning enhancement and grain connectivity, elucidate the correlation between the morphology of such organic dopants and critical current capability,providing a robust strategy for optimizing infiltration-processed MgB2 superconductors.
- 18 May 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (5)
Hot-pressing silver diffusion bonding: A scalable approach for significantly enhancing the engineering critical current density of commercial REBCO tapes
Enhancing the engineering critical current density (Jce) of REBa2Cu3O7-δ (REBCO) tapes is crucial for their application in high-field magnets, superconducting cables, and other fields. Strategies for enhancing the Jce of REBCO tapes primarily involve doping with second-phase nanoparticles and increasing the thickness of the superconducting layer. However, Jce improvement has approached a bottleneck due to limitations in pinning density and thickness effects. This study focuses on developing a novel multilayer REBCO tape prepared via a hot-press silver diffusion bonding method. This technique transfers the REBCO layers from two commercial tapes onto a single tape through hot-pressing and peeling process, significantly enhancing the Jce on commercial tapes. The optimized multilayer tape demonstrates an exceptional Jce value of 0.152MA/cm2 (77 K, self-field), achieving an 68.1% improvement in Jce over the original tape. Furthermore, a 1-meter-long multilayer REBCO tape was successfully fabricated using a segmented hot-pressing silver diffusion bonding method, achieving a Jce of 0.122MA/cm2 (77 K, self-field). Since this method requires no preliminary treatment of the commercial tapes, it offers outstanding potential for engineering applications and provides a viable pathway for fabricating high-performance large-scale REBCO tapes.
- 18 May 2026
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 39 (5)
Hot-pressing silver diffusion bonding: A scalable approach for significantly enhancing the engineering critical current density of commercial REBCO tapes
Enhancing the engineering critical current density (Jce) of REBa2Cu3O7-δ (REBCO) tapes is crucial for their application in high-field magnets, superconducting cables, and other fields. Strategies for enhancing the Jce of REBCO tapes primarily involve doping with second-phase nanoparticles and increasing the thickness of the superconducting layer. However, Jce improvement has approached a bottleneck due to limitations in pinning density and thickness effects. This study focuses on developing a novel multilayer REBCO tape prepared via a hot-press silver diffusion bonding method. This technique transfers the REBCO layers from two commercial tapes onto a single tape through hot-pressing and peeling process, significantly enhancing the Jce on commercial tapes. The optimized multilayer tape demonstrates an exceptional Jce value of 0.152MA/cm2 (77 K, self-field), achieving an 68.1% improvement in Jce over the original tape. Furthermore, a 1-meter-long multilayer REBCO tape was successfully fabricated using a segmented hot-pressing silver diffusion bonding method, achieving a Jce of 0.122MA/cm2 (77 K, self-field). Since this method requires no preliminary treatment of the commercial tapes, it offers outstanding potential for engineering applications and provides a viable pathway for fabricating high-performance large-scale REBCO tapes.
- Open Access
- 1 July 2025
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 38 (7) , 075010
From borohydride to superconductor: efficient and low-cost fabrication of nanostructured MgB2 bulk with high density and excellent performance
MgB2 exhibits distinct advantages over both high-temperature and low-temperature superconductors, endowing it with extensive application prospects. Nevertheless, the high sintering temperature of MgB2 (exceeding 800 °C) and its weak intrinsic pinning severely restrict its practical applications. Utilizing Mg(BH4)2 as a precursor represents an innovative approach for fabricating MgB2 at relatively low temperatures. This method can reduce the sintering temperature by approximately 200 °C–300 °C and refine the grain structure. However, the intermediate process of Mg(BH4)2 decomposition into MgB2 remains unclear, and there is currently no direct evidence elucidating the underlying cause of the low temperature preparation. Additionally, directly employing Mg(BH4)2 as a precursor to fabricate MgB2 often leads to an increased number of pores and a low density. In this study, MgB2 bulks were fabricated through a two-step reaction method involving precursor decomposition and hot pressing. Firstly, Mg(BH4)2 powder was subjected to heat treatment at different temperatures. The products were comprehensively characterized, and the intermediate process and mechanism of Mg(BH4)2 decomposition into MgB2 were analyzed. Subsequently, the powder heat-treated at 520 °C containing nanoscale Mg, B, and MgB2 was deliberately selected to prepare MgB2 bulks through hot pressing. The resultant MgB2 bulks demonstrated a nanoscale grain structure, with a density exceeding 70% of the theoretical value. The sample hot-pressed at 650 °C for 3 h showed the superconducting transition temperature (T c) of 37.4 K, and the critical current density (J c) value of 4.21 × 105 A cm−2 at 10 K in self-field, which is comparable to that of traditional MgB2 sintered at 800 °C. The nanoscale crystallite size of MgB2 generates abundant grain boundary pinning centers, effectively mitigating J c degradation. The MgB2 bulk achieves a J c of 5.07 × 104 A cm−2 at 10 K, 3 T, surpassing most pure MgB2 bulk materials reported to date. Compared to other methods, this low-cost approach achieves efficient synthesis through milder conditions and shorter processing times, demonstrating significant potential for fabricating MgB2 superconductors in high-field applications.
- 1 July 2025
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 38 (7) , 075010
Open AccessFrom borohydride to superconductor: efficient and low-cost fabrication of nanostructured MgB2 bulk with high density and excellent performance
MgB2 exhibits distinct advantages over both high-temperature and low-temperature superconductors, endowing it with extensive application prospects. Nevertheless, the high sintering temperature of MgB2 (exceeding 800 °C) and its weak intrinsic pinning severely restrict its practical applications. Utilizing Mg(BH4)2 as a precursor represents an innovative approach for fabricating MgB2 at relatively low temperatures. This method can reduce the sintering temperature by approximately 200 °C–300 °C and refine the grain structure. However, the intermediate process of Mg(BH4)2 decomposition into MgB2 remains unclear, and there is currently no direct evidence elucidating the underlying cause of the low temperature preparation. Additionally, directly employing Mg(BH4)2 as a precursor to fabricate MgB2 often leads to an increased number of pores and a low density. In this study, MgB2 bulks were fabricated through a two-step reaction method involving precursor decomposition and hot pressing. Firstly, Mg(BH4)2 powder was subjected to heat treatment at different temperatures. The products were comprehensively characterized, and the intermediate process and mechanism of Mg(BH4)2 decomposition into MgB2 were analyzed. Subsequently, the powder heat-treated at 520 °C containing nanoscale Mg, B, and MgB2 was deliberately selected to prepare MgB2 bulks through hot pressing. The resultant MgB2 bulks demonstrated a nanoscale grain structure, with a density exceeding 70% of the theoretical value. The sample hot-pressed at 650 °C for 3 h showed the superconducting transition temperature (T c) of 37.4 K, and the critical current density (J c) value of 4.21 × 105 A cm−2 at 10 K in self-field, which is comparable to that of traditional MgB2 sintered at 800 °C. The nanoscale crystallite size of MgB2 generates abundant grain boundary pinning centers, effectively mitigating J c degradation. The MgB2 bulk achieves a J c of 5.07 × 104 A cm−2 at 10 K, 3 T, surpassing most pure MgB2 bulk materials reported to date. Compared to other methods, this low-cost approach achieves efficient synthesis through milder conditions and shorter processing times, demonstrating significant potential for fabricating MgB2 superconductors in high-field applications.
- 18 December 2024
- Published by Elsevier in Physica C: Superconductivity and its Applications
- Vol. 628
Characterization of damage in REBCO tapes for joint-less 2G-HTS magnets during mechanical slitting
- 18 December 2024
- Published by Elsevier in Physica C: Superconductivity and its Applications
- Vol. 628
Characterization of damage in REBCO tapes for joint-less 2G-HTS magnets during mechanical slitting
- 22 August 2024
- Published by Elsevier in Physica C: Superconductivity and its Applications
- Vol. 624
Improved prediction of critical currents for multi-pancake coil across variable temperature regions
- 22 August 2024
- Published by Elsevier in Physica C: Superconductivity and its Applications
- Vol. 624
Improved prediction of critical currents for multi-pancake coil across variable temperature regions
- Open Access
- 3 August 2024
- Published by Elsevier in Superconductivity
- Vol. 11
Enhancing in-field performance of GdBCO coated conductors by cooperative irradiation with Ti ions and protons
- 3 August 2024
- Published by Elsevier in Superconductivity
- Vol. 11
Open AccessEnhancing in-field performance of GdBCO coated conductors by cooperative irradiation with Ti ions and protons
- 19 July 2024
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 37 (8) , 085024
Development of a multi-pancake HTS magnet operated in persistent current mode based on superconducting joint of REBCO coated conductors
Developing closed-loop magnets that operate in a persistent current mode (PCM) is crucial for achieving higher resolution and sensitivity in NMR and MRI devices. To the best of our knowledge, we report a novel closed-loop multi-pancake (MP) HTS magnet operated on PCM based on a novel jointless winding method with superconducting joints of REBCO coated conductors (CCs). The in-field characteristics of the CC and the joints were investigated to determine the operating parameters of the magnet. The steady central field of the magnet reached ∼408.4 mT at 77 K with an operating current of 16.5 A. The joint resistance was inferred from a higher excitation current of 17 A to be at least less than 2.5 × 10−10Ω. Although the I c value of the joint was considerably lower than that of the CC at self-field, it could maintain similar comparable or even higher in-field I c compared to the CC, which is immensely beneficial for magnet applications. This study provides some insights into the design and construction of closed-loop MP magnets operating in PCM.
- 19 July 2024
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 37 (8) , 085024
Development of a multi-pancake HTS magnet operated in persistent current mode based on superconducting joint of REBCO coated conductors
Developing closed-loop magnets that operate in a persistent current mode (PCM) is crucial for achieving higher resolution and sensitivity in NMR and MRI devices. To the best of our knowledge, we report a novel closed-loop multi-pancake (MP) HTS magnet operated on PCM based on a novel jointless winding method with superconducting joints of REBCO coated conductors (CCs). The in-field characteristics of the CC and the joints were investigated to determine the operating parameters of the magnet. The steady central field of the magnet reached ∼408.4 mT at 77 K with an operating current of 16.5 A. The joint resistance was inferred from a higher excitation current of 17 A to be at least less than 2.5 × 10−10Ω. Although the I c value of the joint was considerably lower than that of the CC at self-field, it could maintain similar comparable or even higher in-field I c compared to the CC, which is immensely beneficial for magnet applications. This study provides some insights into the design and construction of closed-loop MP magnets operating in PCM.
- 18 April 2024
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 37 (5) , 055006
Unlocking the performance evolution of GdBCO coated conductors irradiated by deuterium plasma
REBa2Cu3O7-δ (REBCO, RE: rare earth) coated conductors (CCs) can generate a powerful magnetic field and are optimal for sustaining the reaction in fusion devices. However, the REBCO CCs will inevitably be exposed to neutron radiation during device operation. Transmutation produces gas atoms such as hydrogen will affect their properties. In this paper, GdBCO CCs were irradiated by 20 eV deuterium plasma. It was found that the irradiation introduced smaller (2–4 nm) pinning sites that formed a mixed pinning landscape with rare earth oxides (tens of nanometres) in the pristine samples, leading to an improved vortex pinning. At an irradiation fluence of 5.0 × 1018 D cm−2, the J c values of the samples irradiated by deuterium can maintain the best enhancement of in-field performance at 4.2 K. Excess irradiation results in a decrease in J c, a broadening of the superconducting transition width, and an enhanced disorder in GdBCO. This study provides some valuable insights for potential changes in the properties of REBCO CCs irradiated in fusion devices.
- 18 April 2024
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 37 (5) , 055006
Unlocking the performance evolution of GdBCO coated conductors irradiated by deuterium plasma
REBa2Cu3O7-δ (REBCO, RE: rare earth) coated conductors (CCs) can generate a powerful magnetic field and are optimal for sustaining the reaction in fusion devices. However, the REBCO CCs will inevitably be exposed to neutron radiation during device operation. Transmutation produces gas atoms such as hydrogen will affect their properties. In this paper, GdBCO CCs were irradiated by 20 eV deuterium plasma. It was found that the irradiation introduced smaller (2–4 nm) pinning sites that formed a mixed pinning landscape with rare earth oxides (tens of nanometres) in the pristine samples, leading to an improved vortex pinning. At an irradiation fluence of 5.0 × 1018 D cm−2, the J c values of the samples irradiated by deuterium can maintain the best enhancement of in-field performance at 4.2 K. Excess irradiation results in a decrease in J c, a broadening of the superconducting transition width, and an enhanced disorder in GdBCO. This study provides some valuable insights for potential changes in the properties of REBCO CCs irradiated in fusion devices.
- Open Access
- 21 November 2023
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 37 (1) , 015003
A novel joint-less coil: promising unprecedented magnetic field stability to solve the persistent current mode issue in 2G-HTS magnet application
Closed coils fabricated using second generation high temperature superconducting (2G-HTS) coated conductors (CCs) are promising for superconducting magnets, which operating in persistent current mode (PCM) such as magnetic resonance imaging (MRI) and nuclear magnetic resonance (NMR) systems. However, the fabrication and application of superconducting joints for 2G-HTS CCs still pose a significant challenge. This paper reports a PCM joint-less 2G-HTS coil for capturing magnetic fields, which is called ‘Four Pancake Coil (FPC)’. A novel winding method was developed to form four pancake structure and effectively solved the closed-loop problem of 2G-HTS magnets. Meanwhile, the FPCs generated a 70.4 mT central magnetic field at 77 K and lasted for 57 d with a magnetic field drift rate of only 0.065 ppm h−1, which can satisfy the requirements of MRI magnets. In addition to the closed-loop characteristics of the FPC, the stacked magnet also provides expandability and ease of maintenance exchange. These advantages make it highly promising for the development of closed-loop 2G-HTS magnets.
- 21 November 2023
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 37 (1) , 015003
Open AccessA novel joint-less coil: promising unprecedented magnetic field stability to solve the persistent current mode issue in 2G-HTS magnet application
Closed coils fabricated using second generation high temperature superconducting (2G-HTS) coated conductors (CCs) are promising for superconducting magnets, which operating in persistent current mode (PCM) such as magnetic resonance imaging (MRI) and nuclear magnetic resonance (NMR) systems. However, the fabrication and application of superconducting joints for 2G-HTS CCs still pose a significant challenge. This paper reports a PCM joint-less 2G-HTS coil for capturing magnetic fields, which is called ‘Four Pancake Coil (FPC)’. A novel winding method was developed to form four pancake structure and effectively solved the closed-loop problem of 2G-HTS magnets. Meanwhile, the FPCs generated a 70.4 mT central magnetic field at 77 K and lasted for 57 d with a magnetic field drift rate of only 0.065 ppm h−1, which can satisfy the requirements of MRI magnets. In addition to the closed-loop characteristics of the FPC, the stacked magnet also provides expandability and ease of maintenance exchange. These advantages make it highly promising for the development of closed-loop 2G-HTS magnets.