Chao Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chao Jiang has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
Zixiang Zhao
9 shared publicationsZizhao Ding
Powder Metallurgy Research Institute State Key Laboratory of Powder Metallurgy Central South University Changsha P. R. China
8 shared publicationsXiaozhong Huang
Powder Metallurgy Research Institute of Central South University, Changsha, China
6 shared publicationsYilun Cheng
5 shared publicationsYiting Zhu
5 shared publicationsZuojuan Du
5 shared publications
Latest Publications
- 19 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (69) , 47252-47265
Bionic multifunctional integrated nanofiber film with electromagnetic shielding, Joule heating and motion sensing properties
A shark-skin-inspired biomimetic multifunctional composite film integrating breathability, moisture permeability, and electromagnetic interference shielding was developed, providing a useful reference for multifunctional wearable materials.
- 19 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (69) , 47252-47265
Bionic multifunctional integrated nanofiber film with electromagnetic shielding, Joule heating and motion sensing properties
A shark-skin-inspired biomimetic multifunctional composite film integrating breathability, moisture permeability, and electromagnetic interference shielding was developed, providing a useful reference for multifunctional wearable materials.
- 16 September 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (38) , 12995-13004
Machine Learning-Driven Phase Field Numerical Analysis for a Comprehensive Theoretical Framework of Local Electrochemical Environment and Operating Conditions Effects on Dendrite Evolution Mechanisms
Unraveling the intricate interplay between the local electrochemical environment and operating conditions (LEEO) at the mesoscale is fundamental for the rational design of dendrite-free electrolytes. Herein, we quantitatively decouple the effects of diffusion and electromigration on dendrite evolution by using a phase-field model. Elevated voltages or current densities destabilize ion migration, exacerbating dendritic branching, while unexpectedly optimizing stripping efficiency. Conversely, high diffusion coefficients facilitate lateral ion replenishment, whereas superior ionic conductivity ensures rapid and uniform electromigration; their synergy effectively suppresses tip growth and regulates the lateral deposition. Moreover, Gaussian process regression establishes a robust predictive mapping between the LEEO and Coulombic efficiency (CE). This integrated mechanistic framework offers a reliable platform for screening electrolyte materials toward stable Li metal anodes.
- 16 September 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (38) , 12995-13004
Machine Learning-Driven Phase Field Numerical Analysis for a Comprehensive Theoretical Framework of Local Electrochemical Environment and Operating Conditions Effects on Dendrite Evolution Mechanisms
Unraveling the intricate interplay between the local electrochemical environment and operating conditions (LEEO) at the mesoscale is fundamental for the rational design of dendrite-free electrolytes. Herein, we quantitatively decouple the effects of diffusion and electromigration on dendrite evolution by using a phase-field model. Elevated voltages or current densities destabilize ion migration, exacerbating dendritic branching, while unexpectedly optimizing stripping efficiency. Conversely, high diffusion coefficients facilitate lateral ion replenishment, whereas superior ionic conductivity ensures rapid and uniform electromigration; their synergy effectively suppresses tip growth and regulates the lateral deposition. Moreover, Gaussian process regression establishes a robust predictive mapping between the LEEO and Coulombic efficiency (CE). This integrated mechanistic framework offers a reliable platform for screening electrolyte materials toward stable Li metal anodes.
- Open Access
- 24 August 2026
- Published by Elsevier in SSRN Electronic Journal
Directional Freeze-Dried MOF-Derived CoO/ZnO@C/RGO/PI Aerogels for Broadband Microwave Absorption and Multifunctional Protection
The development of lightweight and multifunctional microwave absorbers is highly desirable for mitigating electromagnetic pollution under complex service conditions. Herein, anisotropic CoO/ZnO@C/reduced graphene oxide/polyimide composite aerogels (CZR) were fabricated through directional freezing, freeze-drying, and subsequent thermal treatment. The aligned porous channels regulate electromagnetic-wave propagation and promote repeated reflections and scattering, while the metal–organic framework-derived CoO/ZnO@C domains introduce abundant defects, heterogeneous interfaces, and polarization centers. Compared with ZnO@C/reduced graphene oxide/polyimide aerogels, the incorporation of CoO-containing domains moderates the excessive dielectric response and improves the balance between electromagnetic attenuation and impedance matching. Consequently, the optimized CZR aerogel achieves a minimum reflection loss of −85.7 dB and a maximum effective absorption bandwidth of 8.2 GHz, covering the X and Ku bands. In addition, a 14 mm-thick CZR aerogel exhibits a sound absorption coefficient of 0.971 at 2875 Hz and maintains values above 0.56 over 2000–6000 Hz. The aerogel also demonstrates favorable thermal-insulation behavior and lightweight load-bearing capability. This work provides a practical strategy for constructing anisotropic graphene-based aerogels with integrated microwave absorption, sound absorption, and multifunctional protection.
- 24 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDirectional Freeze-Dried MOF-Derived CoO/ZnO@C/RGO/PI Aerogels for Broadband Microwave Absorption and Multifunctional Protection
The development of lightweight and multifunctional microwave absorbers is highly desirable for mitigating electromagnetic pollution under complex service conditions. Herein, anisotropic CoO/ZnO@C/reduced graphene oxide/polyimide composite aerogels (CZR) were fabricated through directional freezing, freeze-drying, and subsequent thermal treatment. The aligned porous channels regulate electromagnetic-wave propagation and promote repeated reflections and scattering, while the metal–organic framework-derived CoO/ZnO@C domains introduce abundant defects, heterogeneous interfaces, and polarization centers. Compared with ZnO@C/reduced graphene oxide/polyimide aerogels, the incorporation of CoO-containing domains moderates the excessive dielectric response and improves the balance between electromagnetic attenuation and impedance matching. Consequently, the optimized CZR aerogel achieves a minimum reflection loss of −85.7 dB and a maximum effective absorption bandwidth of 8.2 GHz, covering the X and Ku bands. In addition, a 14 mm-thick CZR aerogel exhibits a sound absorption coefficient of 0.971 at 2875 Hz and maintains values above 0.56 over 2000–6000 Hz. The aerogel also demonstrates favorable thermal-insulation behavior and lightweight load-bearing capability. This work provides a practical strategy for constructing anisotropic graphene-based aerogels with integrated microwave absorption, sound absorption, and multifunctional protection.
- 27 June 2026
- Published by Springer Nature in Journal of Central South University
- Vol. 33 (8) , 3603-3620
Ultrabroadband and wide-angle hollow 3D electromagnetic absorbing material enabled by dual absorption mechanisms and impedance optimization design
- 27 June 2026
- Published by Springer Nature in Journal of Central South University
- Vol. 33 (8) , 3603-3620
Ultrabroadband and wide-angle hollow 3D electromagnetic absorbing material enabled by dual absorption mechanisms and impedance optimization design
- 22 June 2026
- Published by Wiley in Small Methods
- Vol. 10 (14) , e70791
Hollow MnFe 2 O 4 @C Graphene Absorbing Aerogels: Ultra‐Broadband and Flexible Compression Resistance
Graphene‐based aerogels have received substantial attention in the realm of effective electromagnetic wave absorption due to their lightweight qualities and unusual three‐dimensional network structure. This work creates a Hollow MnFe 2 O 4 @ C/reduced graphene oxide (RGO)/polyimide (PI) composite aerogel by anchoring hollow ferrite@carbon particles onto graphene using a two‐step hydrothermal process and freeze‐drying. The electromagnetic properties are adjusted by adjusting the thickness of the carbon shell layer, managing the defect density within the aerogel, improving polarization loss, and enriching internal heterogeneous interfaces. This aerogel has a maximum effective absorption bandwidth of 7.70 GHz and a minimum reflection loss of −68.04 dB. Under volumetric deformation, the composite aerogel continues to perform exceptionally well in terms of absorption. Its maximum effective absorption bandwidths are 7.50 and 7.87 GHz, and its minimum reflection loss at 30% and 50% compression is −79.49 and −60.01 dB, respectively. The impedance mismatch disadvantage brought on by aerogel compression is offset by the synergistic improvement of absorption performance through several loss modes. This aerogel can also tolerate more complicated and demanding settings because it has certain compressive strength and flexibility, as well as fire resistance and thermal insulation. It offers a strong basis for multifunctional absorber material research.
- 22 June 2026
- Published by Wiley in Small Methods
- Vol. 10 (14) , e70791
Hollow MnFe 2 O 4 @C Graphene Absorbing Aerogels: Ultra‐Broadband and Flexible Compression Resistance
Graphene‐based aerogels have received substantial attention in the realm of effective electromagnetic wave absorption due to their lightweight qualities and unusual three‐dimensional network structure. This work creates a Hollow MnFe 2 O 4 @ C/reduced graphene oxide (RGO)/polyimide (PI) composite aerogel by anchoring hollow ferrite@carbon particles onto graphene using a two‐step hydrothermal process and freeze‐drying. The electromagnetic properties are adjusted by adjusting the thickness of the carbon shell layer, managing the defect density within the aerogel, improving polarization loss, and enriching internal heterogeneous interfaces. This aerogel has a maximum effective absorption bandwidth of 7.70 GHz and a minimum reflection loss of −68.04 dB. Under volumetric deformation, the composite aerogel continues to perform exceptionally well in terms of absorption. Its maximum effective absorption bandwidths are 7.50 and 7.87 GHz, and its minimum reflection loss at 30% and 50% compression is −79.49 and −60.01 dB, respectively. The impedance mismatch disadvantage brought on by aerogel compression is offset by the synergistic improvement of absorption performance through several loss modes. This aerogel can also tolerate more complicated and demanding settings because it has certain compressive strength and flexibility, as well as fire resistance and thermal insulation. It offers a strong basis for multifunctional absorber material research.
- 6 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
Bioinspired porous heterogeneous aerogel fibers with a woven architecture for ultra-broadband microwave absorption and thermal regulation
With the rapid development of smart wearable technology, there is an urgent need for smart textiles that integrate efficient microwave absorption and thermal management functions.
- 6 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
Bioinspired porous heterogeneous aerogel fibers with a woven architecture for ultra-broadband microwave absorption and thermal regulation
With the rapid development of smart wearable technology, there is an urgent need for smart textiles that integrate efficient microwave absorption and thermal management functions.
- Open Access
- 1 June 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 19 (6)
Tailoring dielectric relaxation time in ultralight graphene aerogels for ultra-broadband microwave absorption and multifunctional applications
Composite aerogels composed of reduced graphene oxide (RGO), single-walled carbon nanotubes (SWNTs), and polyimide (PI) with an oriented porous structure exhibit flexible, high-performance microwave absorption and a tunable porosity. The polarization relaxation time is varied by adjusting the heat treatment temperature to achieve ultra-broadband microwave absorption at lower thicknesses. SWNTs contribute to the control of aerogel morphology and significantly improve its mechanical toughness. The prepared aerogel has a bulk density of 9.13 mg/cm3 and excellent absorption properties with a minimum absorption peak of −64.5 dB and an effective absorption bandwidth (EAB) of 9.14 GHz. Through experimental comparison and time-domain finite integration calculation, the effect of oriented porous structure on the electromagnetic loss mechanism and performance was elucidated, which can be used for porous wave-absorbing materials. At the same time, the light and flexible PGS composite aerogel fabric is also remarkably flexible, and its excellent mechanical and thermal insulation properties are attributed to its unique orientated microchannel structure. This low-cost, simple and high-performance approach will greatly simplify the application of multifunctional microwave-absorbing materials in wearable and other extreme conditions, including high-temperature environments.
- 1 June 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 19 (6)
Open AccessTailoring dielectric relaxation time in ultralight graphene aerogels for ultra-broadband microwave absorption and multifunctional applications
Composite aerogels composed of reduced graphene oxide (RGO), single-walled carbon nanotubes (SWNTs), and polyimide (PI) with an oriented porous structure exhibit flexible, high-performance microwave absorption and a tunable porosity. The polarization relaxation time is varied by adjusting the heat treatment temperature to achieve ultra-broadband microwave absorption at lower thicknesses. SWNTs contribute to the control of aerogel morphology and significantly improve its mechanical toughness. The prepared aerogel has a bulk density of 9.13 mg/cm3 and excellent absorption properties with a minimum absorption peak of −64.5 dB and an effective absorption bandwidth (EAB) of 9.14 GHz. Through experimental comparison and time-domain finite integration calculation, the effect of oriented porous structure on the electromagnetic loss mechanism and performance was elucidated, which can be used for porous wave-absorbing materials. At the same time, the light and flexible PGS composite aerogel fabric is also remarkably flexible, and its excellent mechanical and thermal insulation properties are attributed to its unique orientated microchannel structure. This low-cost, simple and high-performance approach will greatly simplify the application of multifunctional microwave-absorbing materials in wearable and other extreme conditions, including high-temperature environments.
- 29 April 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (48)
Synergistic Interfacial Engineering of Small Molecule‐Modified 1T‐Phase MoS 2 for Robust Electromagnetic Interference Shielding Composites Hydrogel
The impact of high‐frequency electromagnetic environments on the data accuracy of wearable smart devices necessitates the development of flexible, multifunctional, integrated electromagnetic interference (EMI) shielding materials. In this work, we demonstrate a flexible and multifunctional EMI shielding material fabricated from few‐layer MoS 2 , which has been functionalized with carboxylic acid‐containing small‐molecules (SF‐MoS 2 ). This composite is embedded within a dual‐network hydrogel matrix comprising polyvinyl alcohol (PVA) and sodium alginate (SA), which was called PS/SF‐MoS 2 . The elevated 1T phase content of MoS 2 (65.5%) provided superior conductivity. Supramolecular interactions between polar functional groups facilitated the formation of both the polymer scaffold and a 2D conductive network, synergistically enhancing EMI shielding through multiphase interfaces and conductive fillers. Consequently, PS/SF‐MoS 2 achieved a maximum electromagnetic shielding effectiveness (SE T ) of 53.7 dB in the Ku band, coupled with an exceptional tensile strength of 450 kPa. The hydrogel also demonstrated rapid response/recovery times (38/39.9 ms) and sustained stable sensing functionality over 200 cycles. Critically, the SF‐MoS 2 conductive filler simplifies processing complexity by eliminating the need for multi‐material composite structural design, as required by traditional materials for similar functionalities, thus providing a new paradigm for the development of high‐performance anti‐electromagnetic interference wearable smart electronic devices.
- 29 April 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (48)
Synergistic Interfacial Engineering of Small Molecule‐Modified 1T‐Phase MoS 2 for Robust Electromagnetic Interference Shielding Composites Hydrogel
The impact of high‐frequency electromagnetic environments on the data accuracy of wearable smart devices necessitates the development of flexible, multifunctional, integrated electromagnetic interference (EMI) shielding materials. In this work, we demonstrate a flexible and multifunctional EMI shielding material fabricated from few‐layer MoS 2 , which has been functionalized with carboxylic acid‐containing small‐molecules (SF‐MoS 2 ). This composite is embedded within a dual‐network hydrogel matrix comprising polyvinyl alcohol (PVA) and sodium alginate (SA), which was called PS/SF‐MoS 2 . The elevated 1T phase content of MoS 2 (65.5%) provided superior conductivity. Supramolecular interactions between polar functional groups facilitated the formation of both the polymer scaffold and a 2D conductive network, synergistically enhancing EMI shielding through multiphase interfaces and conductive fillers. Consequently, PS/SF‐MoS 2 achieved a maximum electromagnetic shielding effectiveness (SE T ) of 53.7 dB in the Ku band, coupled with an exceptional tensile strength of 450 kPa. The hydrogel also demonstrated rapid response/recovery times (38/39.9 ms) and sustained stable sensing functionality over 200 cycles. Critically, the SF‐MoS 2 conductive filler simplifies processing complexity by eliminating the need for multi‐material composite structural design, as required by traditional materials for similar functionalities, thus providing a new paradigm for the development of high‐performance anti‐electromagnetic interference wearable smart electronic devices.