Meiling Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Meiling Zhang has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Cai-Rong Zhang
Lanzhou University of Technology
7 shared publications - Lihua Yuan
School of Science, Lanzhou University of Technology, Lanzhou 730050, China
7 shared publications - Yuhong Chen
Lanzhou University of Technology
7 shared publications - Jing Wang
State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China
3 shared publications - Tingting Liu
School of Physics and Electronic Engineering, Xianyang Normal University, Xianyang 712000, China
2 shared publications Cai-Rong Zhang
Lanzhou Univ Technol, Sch Sci, Lanzhou 730050, Gansu, Peoples R China
1 shared publication
Latest Publications
- Open Access
Scandium Decoration of Boron Doped Porous Graphene for High-Capacity Hydrogen Storage
The hydrogen storage properties of the Scandium (Sc) atom modified Boron (B) doped porous graphene (PG) system were studied based on the density functional theory (DFT). For a single Sc atom, the most stable adsorption position on B-PG is the boron-carbon hexagon center after doping with the B atom. The corresponding adsorption energy of Sc atoms was −4.004 eV. Meanwhile, five H2 molecules could be adsorbed around a Sc atom with the average adsorption energy of −0.515 eV/H2. Analyzing the density of states (DOS) and the charge population of the system, the adsorption of H2 molecules in Sc-B/PG system is mainly attributed to an orbital interaction between H and Sc atoms. For the H2 adsorption, the Coulomb attraction between H2 molecules (negatively charged) and Sc atoms (positively charged) also played a critical role. The largest hydrogen storage capacity structure was two Sc atoms located at two sides of the boron-carbon hexagon center in the Sc-B/PG system. Notably, the theoretical hydrogen storage capacity was 9.13 wt.% with an average adsorption energy of −0.225 eV/H2. B doped PG prevents the Sc atom aggregating and improves the hydrogen storage effectively because it can increase the adsorption energy of the Sc atom and H2 molecule.
Open AccessScandium Decoration of Boron Doped Porous Graphene for High-Capacity Hydrogen Storage
The hydrogen storage properties of the Scandium (Sc) atom modified Boron (B) doped porous graphene (PG) system were studied based on the density functional theory (DFT). For a single Sc atom, the most stable adsorption position on B-PG is the boron-carbon hexagon center after doping with the B atom. The corresponding adsorption energy of Sc atoms was −4.004 eV. Meanwhile, five H2 molecules could be adsorbed around a Sc atom with the average adsorption energy of −0.515 eV/H2. Analyzing the density of states (DOS) and the charge population of the system, the adsorption of H2 molecules in Sc-B/PG system is mainly attributed to an orbital interaction between H and Sc atoms. For the H2 adsorption, the Coulomb attraction between H2 molecules (negatively charged) and Sc atoms (positively charged) also played a critical role. The largest hydrogen storage capacity structure was two Sc atoms located at two sides of the boron-carbon hexagon center in the Sc-B/PG system. Notably, the theoretical hydrogen storage capacity was 9.13 wt.% with an average adsorption energy of −0.225 eV/H2. B doped PG prevents the Sc atom aggregating and improves the hydrogen storage effectively because it can increase the adsorption energy of the Sc atom and H2 molecule.
- Open Access
First-Principles Study of the Reaction between Fluorinated Graphene and Ethylenediamine
The reaction process between gauche- and trans-structure ethylenediamine (EDA) and fluorinated graphene (CF) was studied based on density functional theory (DFT). Firstly, the reaction between the most stable gauche-structure EDA and CF was discussed. Some of the reaction results were verified in experiment, but the overall reaction energy barrier was higher. Then, the reaction between the trans-structured EDA and CF was simulated, which concluded that CF is reduced in the main reaction channel and HF is generated at the same time. In this reaction process, the reaction energy barrier is as low as 0.81 eV, which indicates that the reaction may occur spontaneously under natural conditions The Mulliken charge population analysis and the calculation of bond energy prove that the NH bond is more stable than CH and that the H atoms in the CH2 of trans-structure EDA more easily react with CF.
Open AccessFirst-Principles Study of the Reaction between Fluorinated Graphene and Ethylenediamine
The reaction process between gauche- and trans-structure ethylenediamine (EDA) and fluorinated graphene (CF) was studied based on density functional theory (DFT). Firstly, the reaction between the most stable gauche-structure EDA and CF was discussed. Some of the reaction results were verified in experiment, but the overall reaction energy barrier was higher. Then, the reaction between the trans-structured EDA and CF was simulated, which concluded that CF is reduced in the main reaction channel and HF is generated at the same time. In this reaction process, the reaction energy barrier is as low as 0.81 eV, which indicates that the reaction may occur spontaneously under natural conditions The Mulliken charge population analysis and the calculation of bond energy prove that the NH bond is more stable than CH and that the H atoms in the CH2 of trans-structure EDA more easily react with CF.
- 1 January 2019
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 68 (8) , 087101-087101-10
Effect of intrinsic defects and copper impurities co-existing on electromagnetic optical properties of ZnO: First principles study
采用基于自旋密度泛函理论的平面波超软赝势方法, 研究了Cu掺杂ZnO (简称CuZn)与内在缺陷共存对ZnO电磁光性质的影响. 结果表明, Cu是以替位受主的形式掺入的; 制备条件对CuZn及内在缺陷的形成起至关重要的作用, 富氧条件下Cu掺杂有利于内在缺陷的形成, 且CuZn-Oi最易形成; 相反在缺氧条件下, Cu掺杂不利于内在缺陷的形成. 替位Cu的3d电子在价带顶形成未占据受主能级, 产生p导电类型. 与CuZn体系相比, CuZn-VO体系中载流子浓度降低, 导电性变差; CuZn-VZn体系中载流子浓度几乎不变, 对导电性没影响; CuZn-Oi体系中载流子浓度升高, 导电性增强. 纯ZnO体系无磁性; 而Cu掺杂ZnO体系, 与Cu原子相连的O原子, 电负性越小, 键长越短, 对磁矩贡献越大; CuZn与CuZn-Oi体系中的磁矩主要是Cu的3d电子与Z轴上O的2p电子耦合产生的; CuZn中存在空位缺陷(VO, VZn)时, 磁矩主要是Cu 3d电子与XY平面内O的2p电子强烈耦合所致; CuZn中存在VZn时, 磁性还包含VZn周围O(5, 6)号原子2p轨道自旋极化的贡献; 所有体系中Zn原子自旋对称, 不产生磁性. CuZn-VZn和CuZn-Oi缺陷能态中, 深能级中产生的诱导态是O-O 2s电子相互作用产生的. CuZn模型的光学带隙减小, 导致吸收边红移; CuZn-VZn模型中吸收和反射都增强, 使得透射率降低.
- 1 January 2019
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 68 (8) , 087101-087101-10
Effect of intrinsic defects and copper impurities co-existing on electromagnetic optical properties of ZnO: First principles study
采用基于自旋密度泛函理论的平面波超软赝势方法, 研究了Cu掺杂ZnO (简称CuZn)与内在缺陷共存对ZnO电磁光性质的影响. 结果表明, Cu是以替位受主的形式掺入的; 制备条件对CuZn及内在缺陷的形成起至关重要的作用, 富氧条件下Cu掺杂有利于内在缺陷的形成, 且CuZn-Oi最易形成; 相反在缺氧条件下, Cu掺杂不利于内在缺陷的形成. 替位Cu的3d电子在价带顶形成未占据受主能级, 产生p导电类型. 与CuZn体系相比, CuZn-VO体系中载流子浓度降低, 导电性变差; CuZn-VZn体系中载流子浓度几乎不变, 对导电性没影响; CuZn-Oi体系中载流子浓度升高, 导电性增强. 纯ZnO体系无磁性; 而Cu掺杂ZnO体系, 与Cu原子相连的O原子, 电负性越小, 键长越短, 对磁矩贡献越大; CuZn与CuZn-Oi体系中的磁矩主要是Cu的3d电子与Z轴上O的2p电子耦合产生的; CuZn中存在空位缺陷(VO, VZn)时, 磁矩主要是Cu 3d电子与XY平面内O的2p电子强烈耦合所致; CuZn中存在VZn时, 磁性还包含VZn周围O(5, 6)号原子2p轨道自旋极化的贡献; 所有体系中Zn原子自旋对称, 不产生磁性. CuZn-VZn和CuZn-Oi缺陷能态中, 深能级中产生的诱导态是O-O 2s电子相互作用产生的. CuZn模型的光学带隙减小, 导致吸收边红移; CuZn-VZn模型中吸收和反射都增强, 使得透射率降低.
- Open Access
Theoretical Study of Hydrogen on LaFeO3 (010) Surface Adsorption and Subsurface Diffusion
Based on density functional theory, this paper studies the adsorption and the subsurface occupation by H on LaFeO3 (010) surface and their corresponding transition states. As shown from the results, the best storage positions of hydrogen are on the O top position of the LaFeO3 (010) surface and the interstice near the oxygen of the subsurface. In addition, the position of surface Fe atom can also store hydrogen, but H atom prefers to adsorb on O atom first. Whether the H atom is adsorbed on O or Fe atom, it is easy diffuse to the nearby more stable O atom. However, the diffusion between the Fe atoms is difficult to occur. The main diffusion path of the H atom from the surface to the subsurface is the process of inward layer by layer around the O atom. With the fracture of the old H–O bond and the formation of the new H–O bond, the H is around O atom to constantly repeat the process of a hopping-rotational diffusion. H diffuses through the nearest neighbor position, which is more favorable than the direct diffusion.
Open AccessTheoretical Study of Hydrogen on LaFeO3 (010) Surface Adsorption and Subsurface Diffusion
Based on density functional theory, this paper studies the adsorption and the subsurface occupation by H on LaFeO3 (010) surface and their corresponding transition states. As shown from the results, the best storage positions of hydrogen are on the O top position of the LaFeO3 (010) surface and the interstice near the oxygen of the subsurface. In addition, the position of surface Fe atom can also store hydrogen, but H atom prefers to adsorb on O atom first. Whether the H atom is adsorbed on O or Fe atom, it is easy diffuse to the nearby more stable O atom. However, the diffusion between the Fe atoms is difficult to occur. The main diffusion path of the H atom from the surface to the subsurface is the process of inward layer by layer around the O atom. With the fracture of the old H–O bond and the formation of the new H–O bond, the H is around O atom to constantly repeat the process of a hopping-rotational diffusion. H diffuses through the nearest neighbor position, which is more favorable than the direct diffusion.
- Open Access
Li-Decorated β12-Borophene as Potential Candidates for Hydrogen Storage: A First-Principle Study
The hydrogen storage properties of pristine β12-borophene and Li-decorated β12-borophene are systemically investigated by means of first-principles calculations based on density functional theory. The adsorption sites, adsorption energies, electronic structures, and hydrogen storage performance of pristine β12-borophene/H2 and Li-β12-borophene/H2 systems are discussed in detail. The results show that H2 is dissociated into Two H atoms that are then chemisorbed on β12-borophene via strong covalent bonds. Then, we use Li atom to improve the hydrogen storage performance and modify the hydrogen storage capacity of β12-borophene. Our numerical calculation shows that Li-β12-borophene system can adsorb up to 7 H2 molecules; while 2Li-β12-borophene system can adsorb up to 14 H2 molecules and the hydrogen storage capacity up to 10.85 wt %.
Open AccessLi-Decorated β12-Borophene as Potential Candidates for Hydrogen Storage: A First-Principle Study
The hydrogen storage properties of pristine β12-borophene and Li-decorated β12-borophene are systemically investigated by means of first-principles calculations based on density functional theory. The adsorption sites, adsorption energies, electronic structures, and hydrogen storage performance of pristine β12-borophene/H2 and Li-β12-borophene/H2 systems are discussed in detail. The results show that H2 is dissociated into Two H atoms that are then chemisorbed on β12-borophene via strong covalent bonds. Then, we use Li atom to improve the hydrogen storage performance and modify the hydrogen storage capacity of β12-borophene. Our numerical calculation shows that Li-β12-borophene system can adsorb up to 7 H2 molecules; while 2Li-β12-borophene system can adsorb up to 14 H2 molecules and the hydrogen storage capacity up to 10.85 wt %.
- Open Access
Sc-Decorated Porous Graphene for High-Capacity Hydrogen Storage: First-Principles Calculations
The generalized gradient approximation (GGA) function based on density functional theory is adopted to investigate the optimized geometrical structure, electron structure and hydrogen storage performance of Sc modified porous graphene (PG). It is found that the carbon ring center is the most stable adsorbed position for a single Sc atom on PG, and the maximum number of adsorbed H2 molecules is four with the average adsorption energy of −0.429 eV/H2. By adding a second Sc atom on the other side of the system, the hydrogen storage capacity of the system can be improved effectively. Two Sc atoms located on opposite sides of the PG carbon ring center hole is the most suitable hydrogen storage structure, and the hydrogen storage capacity reach a maximum 9.09 wt % at the average adsorption energy of −0.296 eV/H2. The adsorption of H2 molecules in the PG system is mainly attributed to orbital hybridization among H, Sc, and C atoms, and Coulomb attraction between negatively charged H2 molecules and positively charged Sc atoms.
Open AccessSc-Decorated Porous Graphene for High-Capacity Hydrogen Storage: First-Principles Calculations
The generalized gradient approximation (GGA) function based on density functional theory is adopted to investigate the optimized geometrical structure, electron structure and hydrogen storage performance of Sc modified porous graphene (PG). It is found that the carbon ring center is the most stable adsorbed position for a single Sc atom on PG, and the maximum number of adsorbed H2 molecules is four with the average adsorption energy of −0.429 eV/H2. By adding a second Sc atom on the other side of the system, the hydrogen storage capacity of the system can be improved effectively. Two Sc atoms located on opposite sides of the PG carbon ring center hole is the most suitable hydrogen storage structure, and the hydrogen storage capacity reach a maximum 9.09 wt % at the average adsorption energy of −0.296 eV/H2. The adsorption of H2 molecules in the PG system is mainly attributed to orbital hybridization among H, Sc, and C atoms, and Coulomb attraction between negatively charged H2 molecules and positively charged Sc atoms.
- Open Access
A First Principles Study of H2 Adsorption on LaNiO3(001) Surfaces
The adsorption of H2 on LaNiO3 was investigated using density functional theory (DFT) calculations. The adsorption sites, adsorption energy, and electronic structure of LaNiO3(001)/H2 systems were calculated and indicated through the calculated surface energy that the (001) surface was the most stable surface. By looking at optimized structure, adsorption energy and dissociation energy, we found that there were three types of adsorption on the surface. First, H2 molecules completely dissociate and then tend to bind with the O atoms, forming two –OH bonds. Second, H2 molecules partially dissociate with the H atoms bonding to the same O atom to form one H2O molecule. These two types are chemical adsorption modes; however, the physical adsorption of H2 molecules can also occur. When analyzing the electron structure of the H2O molecule formed by the partial dissociation of the H2 molecule and the surface O atom, we found that the interaction between H2O and the (001) surface was weaker, thus, H2O was easier to separate from the surface to create an O vacancy. On the (001) surface, a supercell was constructed to accurately study the most stable adsorption site. The results from analyses of the charge population; electron localization function; and density of the states indicated that the dissociated H and O atoms form a typical covalent bond and that the interaction between the H2 molecule and surface is mainly due to the overlap-hybridization among the H 1s, O 2s, and O 2p states. Therefore, the conductivity of LaNiO3(001)/H2 is stronger after adsorption and furthermore, the conductivity of the LaNiO3 surface is better than that of the LaFeO3 surface.
Open AccessA First Principles Study of H2 Adsorption on LaNiO3(001) Surfaces
The adsorption of H2 on LaNiO3 was investigated using density functional theory (DFT) calculations. The adsorption sites, adsorption energy, and electronic structure of LaNiO3(001)/H2 systems were calculated and indicated through the calculated surface energy that the (001) surface was the most stable surface. By looking at optimized structure, adsorption energy and dissociation energy, we found that there were three types of adsorption on the surface. First, H2 molecules completely dissociate and then tend to bind with the O atoms, forming two –OH bonds. Second, H2 molecules partially dissociate with the H atoms bonding to the same O atom to form one H2O molecule. These two types are chemical adsorption modes; however, the physical adsorption of H2 molecules can also occur. When analyzing the electron structure of the H2O molecule formed by the partial dissociation of the H2 molecule and the surface O atom, we found that the interaction between H2O and the (001) surface was weaker, thus, H2O was easier to separate from the surface to create an O vacancy. On the (001) surface, a supercell was constructed to accurately study the most stable adsorption site. The results from analyses of the charge population; electron localization function; and density of the states indicated that the dissociated H and O atoms form a typical covalent bond and that the interaction between the H2 molecule and surface is mainly due to the overlap-hybridization among the H 1s, O 2s, and O 2p states. Therefore, the conductivity of LaNiO3(001)/H2 is stronger after adsorption and furthermore, the conductivity of the LaNiO3 surface is better than that of the LaFeO3 surface.
- 1 January 2017
- Published by Shanghai Institute of Organic Chemistry in Acta Chimica Sinica
- Vol. 75 (7) , 708-714
First Principles Study on the Adsorption of H2 Molecules on Mg3N2 Surface
- 1 January 2017
- Published by Shanghai Institute of Organic Chemistry in Acta Chimica Sinica
- Vol. 75 (7) , 708-714
First Principles Study on the Adsorption of H2 Molecules on Mg3N2 Surface
- Open Access
- 8 March 2013
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 14 (3) , 5461-5481
The Role of the Conjugate Bridge in Electronic Structures and Related Properties of Tetrahydroquinoline for Dye Sensitized Solar Cells
To understand the role of the conjugate bridge in modifying the properties of organic dye sensitizers in solar cells, the computations of the geometries and electronic structures for 10 kinds of tetrahydroquinoline dyes were performed using density functional theory (DFT), and the electronic absorption and fluorescence properties were investigated via time dependent DFT. The population analysis, molecular orbital energies, radiative lifetimes, exciton binding energies (EBE), and light harvesting efficiencies (LHE), as well as the free energy changes of electron injection ( ) and dye regeneration ( ) were also addressed. The correlation of charge populations and experimental open-circuit voltage (Voc) indicates that more charges populated in acceptor groups correspond to larger Voc. The elongating of conjugate bridge by thiophene units generates the larger oscillator strength, higher LHE, larger absolute value of , and longer relative radiative lifetime, but it induces the decreasing of EBE and . So the extending of conjugate bridge with thiopene units in organic dye is an effective way to increase the harvest of solar light, and it is also favorable for electron injection due to their larger . While the inversely correlated relationship between EBE and LHE implies that the dyes with lower EBE produce more efficient light harvesting.
- 8 March 2013
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 14 (3) , 5461-5481
Open AccessThe Role of the Conjugate Bridge in Electronic Structures and Related Properties of Tetrahydroquinoline for Dye Sensitized Solar Cells
To understand the role of the conjugate bridge in modifying the properties of organic dye sensitizers in solar cells, the computations of the geometries and electronic structures for 10 kinds of tetrahydroquinoline dyes were performed using density functional theory (DFT), and the electronic absorption and fluorescence properties were investigated via time dependent DFT. The population analysis, molecular orbital energies, radiative lifetimes, exciton binding energies (EBE), and light harvesting efficiencies (LHE), as well as the free energy changes of electron injection ( ) and dye regeneration ( ) were also addressed. The correlation of charge populations and experimental open-circuit voltage (Voc) indicates that more charges populated in acceptor groups correspond to larger Voc. The elongating of conjugate bridge by thiophene units generates the larger oscillator strength, higher LHE, larger absolute value of , and longer relative radiative lifetime, but it induces the decreasing of EBE and . So the extending of conjugate bridge with thiopene units in organic dye is an effective way to increase the harvest of solar light, and it is also favorable for electron injection due to their larger . While the inversely correlated relationship between EBE and LHE implies that the dyes with lower EBE produce more efficient light harvesting.