Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


José Luis Velázquez-Libera has a total of 47 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Radiolabeling of ortho/meta-[123I]iodo-Hoechst for proof of direct DNA strand breaks assisted by molecular modeling studies

    by Marc Pretze, Katja Tietze, José Luis Velázquez-Libera, Robert Freudenberg, Roswitha Runge, Ralph A. Bundschuh, Julio Caballero, Jörg Kotzerke

  • Open Access

    QM/MM Reveals Coordination Shift behind Early Lanthanide Preference in Methanol Dehydrogenase XoxF

    by Emiliano IsaíaS Alanís-Manzano, José Luis VelázQuez-Libera, CésAr Millan Pacheco, Alejandro RamírEz-Solís, Humberto Saint-Martin

    Lanthanides serve as essential catalytic cofactors in methanol dehydrogenase (MDH), yet the structural and energetic basis for the biological preference for early lanthanides (La–Gd) remains poorly understood. Here, we present a systematic Quantum-Mechanics/Molecular-Mechanics (QM/MM) study of the full Ln series (La–Lu) using the ωB97X-D4rev exchange-correlation functional. Structurally, we identify a substrate-dependent coordination switch: in the Michaelis–Menten complex, the biologically relevant light Ln (La–Gd) maintains a 10-coordinate geometry, whereas a discrete transition to a 9-coordinate state occurs from Tb onward, driven by the shift of the essential Asp301 from bidentate to monodentate coordination mode. Notably, this shift is absent in the substrate-free enzyme, indicating that substrate binding enforces the steric crowding that disfavors heavier metals. Energetic analysis reveals that within the biologically relevant window (La–Gd), substrate affinity is mostly uniform, while enzyme binding affinity exhibits a clear and steady preference for the lighter metals. These results demonstrate that biological lanthanide selection in MDH arises from a combination of higher binding affinity for early lanthanides and their ability to preserve a catalytically competent 10-coordinate geometry, rather than from differential substrate binding. Taken together, our findings provide a structural and energetic framework for understanding the coordination properties of the lanthanide series in the active site of the MDH and may guide further QM/MM studies on the reaction mechanism of this enzyme as well as the engineering of lanthanide-dependent biocatalysts.


  • Adapted DFTB3 Repulsive Potentials Reach DFT Accuracy for Hydride Transfer Reactions in Enzymes

    by José Luís Velázquez‐Libera, Rodrigo Recabarren, David Adrian Saez, Carlos Castillo, J. Javier Ruiz‐Pernía, Iñaki Tuñón, Esteban Vöhringer‐Martinez

    Enzymatic hydride transfer reactions play a crucial role in numerous metabolic pathways, yet their accurate computational modeling remains challenging due to the trade‐off between accuracy and computational efficiency. Ideally, molecular dynamics simulations should sample all enzyme configurations along the reaction path using post‐Hartree‐Fock or DFT QM/MM electrostatic embedding methods, but these are computationally expensive. Here, we introduce a simple approach to improve the third‐order density functional tight binding (DFTB3) semi‐empirical method to model hydride transfer reactions in enzymes. We identified deficiencies in DFTB3's description of the potential energy surface for the hydride transfer step in Crotonyl‐CoA Carboxylase/Reductase (Ccr) and developed a systematic methodology to address these limitations. Our approach involves modifying DFTB3's repulsive potential functions using linear combinations of harmonic functions, guided by analysis of C‐H and C‐C distance distributions along the reaction path. The optimized DFTB3 Hamiltonian significantly improved the description of the hydride transfer reaction in Ccr, reproducing the reference DFT activation barrier within 0.1 kcal/mol. We also addressed the transferability of our method by applying it to another hydride transfer reaction bearing the 1,4‐dihydropyridine motif but exhibiting distinct structural features of the reactant, as well as the hydride transfer reaction in Dihydrofolate Reductase (DHFR). In both cases, our adapted DFTB3 Hamiltonian correctly reproduced the DFT reference and experimentally observed activation barriers. The low computational cost and transferability of our method will enable more accurate and efficient QM/MM molecular dynamics simulations of hydride transfer reactions, potentially accelerating research in enzyme engineering and drug design.


  • CorrEA: A Web Server for Optimizing Correlations between Calculated Energies and Activities in Ligand–Receptor Systems Considering Multiple Binding Site Conformations

    by Sergio Alfaro, Fabián González-Norambuena, José Luis Velázquez-Libera, Francisco Adasme-Carreño, Julio Caballero

    In silico molecular models of receptor-ligand complexes, built using molecular docking methods, are valuable as they potentially reveal the chemical interactions responsible for specific affinities. When applied to series of congeneric compounds, they help formulate theories about the effects of different substituents on affinity differences. Molecular docking provides (i) a pose where chemical interactions are optimized and (ii) an energy value indicating how favorable the interaction is. The capability of molecular docking for the first purpose is recognized, but it fails considerably in the second. It is widely known that energy values obtained by molecular docking are unreliable, which makes their application to congeneric series unable to correlate these computationally calculated energy values with laboratory-derived biological activities. Theoretically, an improved correlation could be obtained when protein flexibility is considered in the docking calculation; i.e., flexibility in the protein residues at the binding site can give access to more representative docking solutions. With this in mind, in this work, we present the novel web server CorrEA with a simple and innovative way of considering the flexibility of ligand-protein systems. To apply the method, users must generate a set of receptor conformations exhibiting significant variability within the binding site. Subsequently, they should cross-dock the ligand series they intend to study, to obtain various poses for each ligand across the different receptor conformations. CorrEA performs a genetic algorithm (GA) selection to extract a representative complex for each ligand that better adjusts the global correlation between calculated docking energy values and experimental logarithmic biological activities. In the end, CorrEA provides the ligand-protein pairs that produce the highest correlations. The new method was tested in several different cases to demonstrate its usefulness.


  • Multiobjective Evolutionary Strategy for Improving Semiempirical Hamiltonians in the Study of Enzymatic Reactions at the QM/MM Level of Theory

    by José Luís Velázquez-Libera, Rodrigo Recabarren, Esteban Vöhringer-Martinez, Yamisleydi Salgueiro, J. Javier Ruiz-Pernía, Julio Caballero, Iñaki Tuñón

    Quantum mechanics/molecular mechanics (QM/MM) simulations are crucial for understanding enzymatic reactions, but their accuracy depends heavily on the quantum-mechanical method used. Semiempirical methods offer computational efficiency but often struggle with accuracy in complex systems. This work presents a novel multiobjective evolutionary strategy for optimizing semiempirical Hamiltonians, specifically designed to enhance their performance in enzymatic QM/MM simulations while remaining broadly applicable to condensed-phase systems. Our methodology combines automated parameter optimization, targeting ab initio or density functional theory (DFT)-reference potential energy surfaces, atomic charges, and gradients, with comprehensive validation through minimum free energy path (MFEP) calculations. To demonstrate its effectiveness, we applied our approach to improve the GFN2-xTB Hamiltonian using two enzymatic systems that involve hydride transfer reactions where the activation energy barrier is severely underestimated: Crotonyl-CoA carboxylase/reductase (CCR) and dihydrofolate reductase (DHFR). The optimized parameters showed significant improvements in reproducing potential and free energy surfaces, closely matching higher-level DFT calculations. Through an efficient two-stage optimization process, we first developed parameters for CCR using reaction path data, then refined these parameters for DHFR by incorporating a targeted set of additional training geometries. This strategic approach minimized the computational cost while achieving accurate descriptions of both systems, as validated through QM/MM simulations using the Adaptive String Method (ASM). Our method represents an efficient approach for optimizing semiempirical methods to study larger systems and longer time scales, with potential applications in enzymatic reaction mechanism studies, drug design, and enzyme engineering.


  • Open Access

    Multi-objective evolutionary strategy for improving semiempirical Hamiltonians in the study of enzymatic reactions at the QM/MM level of theory

    by José Luís Velázquez-Libera, Rodrigo Recabarren, Esteban Vöhringer-Martinez, Yamisleydi Salgueiro, J. Javier Ruiz-Pernía, Julio Caballero, Iñaki Tuñón

    Quantum mechanics/molecular mechanics (QM/MM) simulations are crucial for understanding enzymatic reactions, but their accuracy depends heavily on the quantum-mechanical method used. Semiempirical methods offer computational efficiency but often struggle with accuracy in complex systems. This work presents a novel multi-objective evolutionary strategy for optimizing semiempirical Hamiltonians, specifically designed to enhance their performance in enzymatic QM/MM simulations while remaining broadly applicable to condensed-phase systems. Our methodology combines automated parameter optimization, targeting \textit{ab initio} or density functional theory (DFT)-reference potential energy surfaces, atomic charges, and gradients, with comprehensive validation through minimum free energy path (MFEP) calculations. To demonstrate its effectiveness, we applied our approach to improve the GFN2-xTB Hamiltonian using two enzymatic systems that involve hydride transfer reactions where the activation energy barrier is severely underestimated: Crotonyl-CoA carboxylase/reductase (CCR) and dihydrofolate reductase (DHFR). The optimized parameters showed significant improvements in reproducing potential and free energy surfaces, closely matching higher-level DFT calculations. Through an efficient two-stage optimization process, we first developed parameters for CCR using reaction path data, then refined these parameters for DHFR by incorporating a targeted set of additional training geometries. This strategic approach minimized the computational cost while achieving accurate descriptions of both systems, as validated through QM/MM simulations using the Adaptive String Method (ASM). Our method represents an efficient approach for optimizing semiempirical methods to study larger systems and longer timescales, with potential applications in enzymatic reaction mechanisms studies, drug design, and enzyme engineering.

  • Open Access

    Adapted DFTB3 repulsive potentials reach DFT accuracy for hydride transfer reactions in enzymes

    by José Luís Velázquez-Libera, Rodrigo Recabarren, David Adrian Saez, Carlos Castillo, J. Javier Ruiz-Pernía, Iñaki Tuñón, Esteban Vöhringer-Martinez

    Enzymatic hydride transfer reactions play a crucial role in numerous metabolic pathways, yet their accurate computational modeling remains challenging due to the trade-off between accuracy and computational efficiency. Ideally, molecular dynamics simulations should sample all enzyme configurations along the reaction path using post Hartree-Fock or DFT QM/MM electrostatic embedding methods, but these are computationally expensive. Here, we introduce a simple approach to improve the third-order density functional tight binding (DFTB3) semi-empirical method to model hydride transfer reactions in enzymes. We identified deficiencies in DFTB3's description of the potential energy surface for the hydride transfer step in Crotonyl-CoA Carboxylase/Reductase (Ccr) and developed a systematic methodology to address these limitations. Our approach involves modifying DFTB3's repulsive potential functions using linear combinations of harmonic functions, guided by analysis of C-H and C-C distance distributions along the reaction path. The optimized DFTB3 Hamiltonian significantly improved the description of the hydride transfer reaction in Ccr, reproducing the reference DFT activation barrier within 0.1 kcal/mol. We also addressed the transferability of our method by applying it to another hydride transfer reaction bearing the 1,4-dihydropyridine motif but exhibiting distinct structural features of the reactant, as well as the hydride transfer reaction in Dihydrofolate Reductase (DHFR). In both cases our adapted DFTB3 Hamiltonian correctly reproduced the DFT reference and experimentally observed activation barriers. The low computational cost and transferability of our method will enable more accurate and efficient QM/MM molecular dynamics simulations of hydride transfer reactions, potentially accelerating research in enzyme engineering and drug design.


  • Understanding the Interactions of Ubiquitin-Specific Protease 7 with Its Substrates through Molecular Dynamics Simulations: Insights into the Role of Its C-Terminal Domains in Substrate Recognition

    by José Luis Velázquez-Libera, Julio Caballero, Jans Alzate-Morales, J. Javier Ruiz-Pernía, Iñaki Tuñón

    Ubiquitin-specific protease 7 (USP7) is a deubiquitinase enzyme that plays a critical role in regulating various cellular processes by cleaving ubiquitin molecules from target proteins. The C-terminal loop (CTL) motif is a specific region at the C-terminal end of the USP7 enzyme. Recent experiments suggest that the CTL motif plays a role in USP7's catalytic activity by contributing to the enzyme's structural stability, substrate recognition, and catalytic efficiency. The objective of this work is to elucidate these roles through the utilization of computational methods for molecular simulations. For this, we conducted extensive molecular dynamics (MD) simulations to investigate the conformational dynamics and protein-protein interactions within the USP7 enzyme-substrate complex with the substrate consisting of the ubiquitin tagged with the fluorescent label rhodamine 110-gly (Ub-Rho). Our results demonstrate that the CTL motif plays a crucial role in stabilizing the Ubl domains' conformation and augmenting the stability of active conformations within the enzyme-substrate complex. Conversely, the absence of the CTL motif results in increased flexibility and variability in Ubl domains' motion, leading to a reduced percentage of active conformations. Furthermore, our analysis of protein-protein interactions highlights the significance of the CTL motif in anchoring the Ubl45 domains to the catalytic domain (CD), thereby facilitating stable interactions with the substrate. Overall, our findings provide valuable insights into the conformational dynamics and protein-protein interactions inherent in the USP7 enzyme-substrate complex. These insights shed light on some mechanistic details of USP7 concerning the substrate's recognition before its catalytic action.


  • Front Cover: Insights into the Structural and Energetic Descriptions of Ubiquitin Specific Protease 7 (USP7) Catalytic Mechanisms by Hybrid QM/MM Simulations. (ChemCatChem 17/2023)

    by José Luis Velázquez‐Libera, Julio Caballero, Jans Alzate‐Morales, J. Javier Ruiz‐Pernía, Iñaki Tuñón

  • Insights into the Structural and Energetic Descriptions of Ubiquitin Specific Protease 7 (USP7) Catalytic Mechanisms by Hybrid QM/MM Simulations.

    by José Luis Velázquez‐Libera, Julio Caballero, Jans Alzate‐Morales, J. Javier Ruiz‐Pernía, Iñaki Tuñón

    We have reported the first computational study about USP7 reaction mechanism with the substrate Ubiquitin‐Rhodamine 110‐G (Ub‐Rho) using a robust methodology that integrated homology modeling, classical molecular dynamics (MD) simulations, protein‐protein interaction fingerprints (IFPs) analysis, principal components analysis (PCA) and clustering, and the hybrid QM/MM simulations using the adaptive string method (ASM). The results presented in this work could be useful to understand the dynamic nature of USP7 enzyme‐substrate complexes. In this sense, we have provided a detailed structural description of the most relevant conformational changes observed in our simulations, which could be used as reference for modeling more complicated USP7’s enzyme‐substrate complexes. On the other hand, our descriptions of the protein‐protein interactions of Ub‐Rho's residues at P5 to P1’ positions with the CD's active site, and the geometries of the stationary states located along the MFEP could be considered for designing new potent and selective inhibitors for USP7’s activity.