TWThomas S. Wilhelm

Thomas S. Wilhelm

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Thomas S. Wilhelm has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ordered Si Micropillar Arrays via Carbon-Nanotube-Assisted Chemical Etching for Applications Requiring Nonreflective Embedded Contacts

    by Thomas S. Wilhelm, Ian L. Kecskes, Mohadeseh A. Baboli, Alireza Abrand, Michael S. Pierce, Brian J. Landi, Ivan Puchades, Parsian K. Mohseni


  • Direct Light‐Writing of Nanoparticle‐Based Metallo‐Dielectric Optical Waveguide Arrays Over Silicon Solar Cells for Wide‐Angle Light Collecting Modules

    by Saeid Biria, Thomas S. Wilhelm, Parsian K. Mohseni, Ian D. Hosein

    Here presented are the properties and performance of a new metallo‐dielectric waveguide array structure as the encapsulation material for silicon solar cells. The arrays are produced through light‐induced self‐writing combined with in situ photochemical synthesis of silver nanoparticles. Each waveguide comprises a cylindrical core consisting of a high refractive index polymer and silver nanoparticles homogenously dispersed in its medium, all of which are surrounded by a low refractive index common cladding. The waveguide array‐based films are processed directly over a silicon solar cell. Arrays with systematically varied concentration of AgSbF6 as the salt precursor are explored. The structures are tested for their wide‐angle light capture capabilities, specifically toward enhanced conversion efficiency and current production of encapsulated solar cells. Observed are increases in the external quantum efficiency, especially at wide incident angles up to 70°, and nominal increases in the short circuit current density by 1 mA cm−2 (relative to an array without nanoparticles). Enhanced light collection is explained in terms of the beneficial effect of scattering by the nanoparticles along the waveguide cores. This is a promising approach toward solar cell encapsulants that aid to increase solar cell output over both the course of the day and year.


  • Communication—Black GaAs with Sub-Wavelength Nanostructures Fabricated via Lithography-Free Metal-Assisted Chemical Etching

    by Thomas S. Wilhelm, Alex P. Kolberg, Mohadeseh A. Baboli, Alireza Abrand, Kris A. Bertness, Parsian K. Mohseni

    A practical nanofabrication process is detailed for the generation of black GaAs. Discontinuous films of Au nanoparticles are electrodeposited onto GaAs substrates to catalyze site-specific etching in a solution consisting of KMnO4 and HF via the metal-assisted chemical etching. This provides a solution-based and lithography-free method for fabricating sub-wavelength nanostructure arrays that exhibit solar-weighted reflectance approaching 4%. This two-step benchtop process can be performed at room-temperature without lithography, vacuum instrumentation, or epitaxy, providing a high-throughput nanotexturing approach for photovoltaics applications.


  • Metal-Assisted Chemical Etching for Simple, Cost-Effective, and Large-Scale III-V Semiconductor Nanofabrication

    by Thomas S. Wilhelm, Alex P. Kolberg, Zihao Wang, Cody W. Soule, Mohadeseh A. Baboli, Jian Yan, Stefan F. Preble, Parsian K. Mohseni

    Nanostructured semiconductor architectures have been the topic of extensive research for decades due to their advantages over their bulk or planar counterparts. However, many III-V materials are often plagued by a host of nanofabrication difficulties stemming from incompatible or inefficient top-down etching, or expensive bottom-up growth techniques. Metal-assisted chemical etching (MacEtch) and inverse MacEtch (I-MacEtch) are powerful and solution-based nanofabrication alternatives that combine many attractive processing advantages, including the simplicity and cost-efficiency of conventional wet-chemical etching, and the ability to yield high aspect-ratio structures that are typically generated via reactive-ion etching. Furthermore, MacEtch is not hindered by many common fabrication limitations, such as the isotropic or crystallographic tendency of traditional wet etching, and the detrimental sidewall damage and lattice defects that stem from high energy ion bombardment during dry etching. MacEtch samples consist of a thin metallic catalyst layer (e.g., Au, Ag, or Pt) in intimate contact with a semiconductor. The metal-interfaced semiconductor is then submerged in an etching solution containing an acid (e.g., hydrofluoric acid or sulfuric acid) and an oxidant (e.g., hydrogen peroxide or potassium permanganate). Fundamentally, MacEtch mechanisms are modelled after a galvanic cell; that is, cathodic and anodic half reactions occur at the solution/catalyst and catalyst/semiconductor interfaces, respectively. The metal catalyzes the reduction of oxidant species within the solution, thereby locally injecting holes into the interfaced substrate. Preferential dissolution of the selectively oxidized material realizes high aspect-ratio structures using solution-based processing. While this process is commonly applied to Si and binary III-V systems, MacEtch fabrication of two key ternary compound III-V material systems is demonstrated here for the first time, including Au-enhanced InGaP and AlGaAs. Firstly, I-MacEtch of heteroepitaxial InGaP/GaAs is presented, and differential etch rates between epilayer and substrate are exploited as a viable method to produce suspended III-V nanofoils. Secondly, I-MacEtch of AlGaAs is reported for fabrication of ordered nanopillar arrays, whose aspect-ratio is shown to be tunable with Al fraction (x) and etching temperature (T). Finally, an entirely solution-based and lithography-free MacEtch process is demonstrated for fabrication of black GaAs composed of sub-wavelength dimension nanostructures. The work detailed here provides simple, low-cost, and efficient means to customize nanofabrication processes for specific needs. It is anticipated that these methods can be utilized for adaptable and versatile processing of nanomaterials for LEDs, lasers, HEMTs, and solar cells. Fig. 1 – (a) false-colored cross-sectional SEM image and (b) schematic depicting overlapping hole distributions for Au-patterned I-MacEtch of suspended InGaP nanofoils [1]. False-colored tilted-view SEM images of Au-patterned I-MacEtch of AlGaAs (c) before and (d) after Au removal via mechanical exfoliation, and (e) a model illustrating the ability to tune the etch anisotropy with increasing Al content for a fixed etch temperature (x| T ) and increasing temperature for a fixed Al content (T| x ) [2]. [1] – T. S. Wilhelm et al., ACS Appl. Mater. Interfaces, 10, 2058 (2018) [2] – T. S. Wilhelm et al., ACS Appl. Mater. Interfaces, 10, 27488 (2018) Figure 1

  • Improving pseudo-van der Waals epitaxy of self-assembled InAs nanowires on graphene via MOCVD parameter space mapping

    by Mohadeseh A. Baboli, Michael A. Slocum, Hyun Kum, Thomas S. Wilhelm, Stephen J. Polly, Seth M. Hubbard, Parsian K. Mohseni

    Heterogeneous self-assembly of III–V nanostructures on inert two-dimensional monolayer materials enables novel hybrid nanosystems with unique properties that can be exploited for low-cost and low-weight flexible optoelectronic and nanoelectronic device applications. Here, the pseudo-van der Waals epitaxy (vdWE) growth parameter space for heterogeneous integration of InAs nanowires (NWs) with continuous films of single layer graphene (SLG) via metalorganic chemical vapor deposition (MOCVD) is investigated. The length, diameter, and number density of NWs, as well as areal coverage of parasitic islands, are quantified as functions of key growth variables including growth temperature, V/III ratio, and total flow rate of metalorganic and hydride precursors. A compromise between self-assembly of high aspect ratio NWs comprising high number density arrays and simultaneous minimization of parasitic growth coverage is reached under a selected set of optimal growth conditions. Exploration of NW crystal structures formed under various growth conditions reveals that a characteristic polytypic and disordered lattice is invariant within the explored parameter space. A growth evolution study reveals a gradual reduction in both axial and radial growth rates within the explored timeframe for the optimal growth conditions, which is attributed to a supply-limited competitive growth regime. Two strategies are introduced for further growth optimization. Firstly, it is shown that the absence of a pre-growth in situ arsine surface treatment results in a reduction of parasitic island coverage by factor of ∼0.62, while NW aspect ratio and number densities are simultaneously enhanced. Secondly, the use of a two-step flow-modulated growth procedure allows for realization of dense fields of high aspect ratio InAs NWs. As a result of the applied studies and optimization of the growth parameter space, the highest reported axial growth rate of 840 nm min−1 and NW number density of ∼8.3 × 108 cm−2 for vdWE of high aspect ratio (>80) InAs NW arrays on graphitic surfaces are achieved. This work is intended to serve as a guide for vdWE of self-assembled III–V semiconductor NWs such as In-based ternary and quaternary alloys on functional two-dimensional monolayer materials, toward device applications in flexible optoelectronics and tandem-junction photovoltaics.


  • Ordered AlxGa1–xAs Nanopillar Arrays via Inverse Metal-Assisted Chemical Etching

    by Thomas S. Wilhelm, Zihao Wang, Mohadeseh A. Baboli, Jian Yan, Stefan F. Preble, Parsian K. Mohseni

    The ternary III–V semiconductor compound, AlxGa1–xAs, is an important material that serves a central role within a variety of nanoelectronic, optoelectronic, and photovoltaic devices. With all of its uses, the material itself poses a host of fabrication difficulties stemming from conventional top-down processing, including standard wet-chemical etching and reactive-ion etching (RIE). Metal-assisted chemical etching (MacEtch) techniques provide low-cost and benchtop methods that combine many of the advantages of RIE and wet-chemical etching, without being hindered by many of their disadvantages. Here, inverse-progression MacEtch (I-MacEtch) of Au-patterned AlxGa1–xAs is demonstrated for the first time and is exploited for the generation of vertical and ordered nanopillar arrays. The etching solution employed here consists of citric acid (C6H8O7) and hydrogen peroxide (H2O2). The I-MacEtch evolution is tracked in time for AlxGa1–xAs samples with compositions defined by x = 0.55, x = 0.60, and x = 0.70. The vertical and lateral etch rates (VER and LER, respectively) are shown to be tunable with Al fraction and temperature of the etching solution, based on modification of catalytically injected hole distributions. Control over the VER/LER ratio is demonstrated by tailoring etch conditions for single-step fabrication of ordered AlGaAs nanopillar arrays with predefined aspect ratios. Maximum VER and LER values of ∼40 nm/min and ∼105 nm/min, respectively, are measured for Al0.55Ga0.45As at a process temperature of 65 °C. The I-MacEtch nanofabrication methodology outlined in this study may be utilized for the processing of many devices, including high electron mobility transistors, distributed Bragg reflectors, lasers, light-emitting diodes, and multijunction solar cells containing AlGaAs components.


  • Fabrication of Suspended III–V Nanofoils by Inverse Metal-Assisted Chemical Etching of In0.49Ga0.51P/GaAs Heteroepitaxial Films

    by Thomas S. Wilhelm, Cody W. Soule, Mohadeseh A. Baboli, Christopher J. O’cOnnell, Parsian K. Mohseni

    Metal-assisted chemical etching (MacEtch) has been established as a low-cost, benchtop, and versatile method for large-scale fabrication of semiconductor nanostructures and has been heralded as an alternative to conventional top-down approaches such as reactive-ion etching. However, extension of this technique to ternary III–V compound semiconductor alloys and heteroepitaxial systems has remained relatively unexplored. Here, Au-assisted and inverse-progression MacEtch (I-MacEtch) of the heteroepitaxial In0.49Ga0.51P/GaAs material system is demonstrated, along with a method for fabricating suspended InGaP nanofoils of tunable thickness in solutions of hydrofluoric acid (HF) and hydrogen peroxide (H2O2). A comparison between Au- and Cr-patterned samples is used to demonstrate the catalytic role of Au in the observed etching behavior. Vertical etch rates for nominally undoped, p-type, and n-type InGaP are determined to be ∼9.7, ∼8.7, and ∼8.8 nm/min, respectively. The evolution of I-MacEtch in the InGaP/GaAs system is tracked, leading to the formation of nanocavities located at the center of off-metal windows. Upon nanocavity formation, additional localized mass-transport pathways to the underlying GaAs substrate permit its rapid dissolution. Differential etch rates between the epilayer and substrate are exploited in the fabrication of InGaP nanofoils that are suspended over micro-trenches formed in the GaAs substrate. A model is provided for the observed I-MacEtch mechanism, based on an overlap of neighboring injected hole distribution profiles. The nanofabrication methodology shown here can be applied to various heteroepitaxial III–V systems and can directly impact the conventional processing of device applications in photonics, optoelectronics, photovoltaics, and nanoelectronics.