Chen Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chen Yang has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
- Howon Lee
Seoul National University
12 shared publications - Daehoon Han
School of Chemical Engineering, Chonnam National University, Gwangju, Republic of Korea
6 shared publications Andrew Dopp
Department of Mechanical and Aerospace Engineering, Rutgers, The State University of New Jersey, USA
2 shared publications- Hatim E. Sabaawy
Division of Medical Oncology, Department of Medicine, University of Colorado Denver, Anschutz Medical Campus; Aurora, CO, 80045, USA
2 shared publications - Hongye Sun
Group of Functional Materials, Department of Electrical Engineering and Information Technology, Technische Universität Ilmenau, 98693 Ilmenau, Germany
2 shared publications Kai Zhang
Department of Mechanical Engineering, The Hong Kong University of Science and Technology 1 , Clear Water Bay, Kowloon, Hong Kong
2 shared publications
Latest Publications
- 6 November 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (45)
Oxygen-mediated projection microstereolithography for sub–100-μm zirconia dental veneers
High-resolution vat photopolymerization of ceramics is constrained by light scattering, which broadens cured features, and by shallow penetration, which limits interlayer bonding. This trade-off is particularly damaging for microscale structures such as no-preparation dental veneers. We introduce an oxygen-mediated projection microstereolithography strategy in which an oxygen-permeable release film creates an interfacial inhibition field in high-solid–loading zirconia slurry. Rather than uniformly reducing curing, oxygen preferentially filters low-dose scattered light at pattern edges while preserving curing in the projected core. This anisotropic inhibition reshapes the accuracy-depth trade-off, enabling optimized multilayer printing of thin-wall zirconia. The process enabled reproducible fabrication of ∼80-micrometer zirconia veneers with high trueness, improved marginal adaptation, and handling-related strength comparable to substantially thicker milled veneers. The approach provides the potential for minimally invasive dental restoration and a general strategy for high-resolution additive manufacturing of strongly scattering ceramic suspensions.
- 6 November 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (45)
Oxygen-mediated projection microstereolithography for sub–100-μm zirconia dental veneers
High-resolution vat photopolymerization of ceramics is constrained by light scattering, which broadens cured features, and by shallow penetration, which limits interlayer bonding. This trade-off is particularly damaging for microscale structures such as no-preparation dental veneers. We introduce an oxygen-mediated projection microstereolithography strategy in which an oxygen-permeable release film creates an interfacial inhibition field in high-solid–loading zirconia slurry. Rather than uniformly reducing curing, oxygen preferentially filters low-dose scattered light at pattern edges while preserving curing in the projected core. This anisotropic inhibition reshapes the accuracy-depth trade-off, enabling optimized multilayer printing of thin-wall zirconia. The process enabled reproducible fabrication of ∼80-micrometer zirconia veneers with high trueness, improved marginal adaptation, and handling-related strength comparable to substantially thicker milled veneers. The approach provides the potential for minimally invasive dental restoration and a general strategy for high-resolution additive manufacturing of strongly scattering ceramic suspensions.
- Open Access
- 23 October 2024
- Published by MDPI AG in Bioengineering
- Vol. 11 (11) , 1055
Full-Thickness Perfused Skin-on-a-Chip with In Vivo-Like Drug Response for Drug and Cosmetics Testing
In this study, we present a novel 3D perfused skin-on-a-chip model fabricated using micro-precision 3D printing, which offers a streamlined and reproducible approach for incorporating perfusion. Perfused skin models are well-regarded for their advantages, such as improved nutrient supply, enhanced barrier function, and prolonged tissue viability. However, current models often require complex setups, such as self-assembled endothelial cells or sacrificial rods, which are prone to variability and time-consuming. Our model uses projection micro-stereolithography 3D printing to create precise microcapillary-like channels using a biocompatible resin, overcoming the drug-absorbing properties of PDMS. A customized chip holder allows for the simultaneous culture of six perfused chips, enabling high-throughput testing. The engineered skin-on-a-chip features distinct dermis and epidermis layers, confirmed via H&E staining and immunostaining. To evaluate drug screening capabilities, inflammation was induced using TNF-α and treated with dexamethasone, with cytokine levels compared to 2D cultures and human skin biopsies. Our 3D model exhibited drug response trends similar to human skin, while showing reduced cytotoxicity over time compared to biopsies. This perfused skin-on-a-chip provides a reliable, physiologically relevant alternative for drug and cosmetics screening, simplifying perfusion setup while preserving key benefits.
- 23 October 2024
- Published by MDPI AG in Bioengineering
- Vol. 11 (11) , 1055
Open AccessFull-Thickness Perfused Skin-on-a-Chip with In Vivo-Like Drug Response for Drug and Cosmetics Testing
In this study, we present a novel 3D perfused skin-on-a-chip model fabricated using micro-precision 3D printing, which offers a streamlined and reproducible approach for incorporating perfusion. Perfused skin models are well-regarded for their advantages, such as improved nutrient supply, enhanced barrier function, and prolonged tissue viability. However, current models often require complex setups, such as self-assembled endothelial cells or sacrificial rods, which are prone to variability and time-consuming. Our model uses projection micro-stereolithography 3D printing to create precise microcapillary-like channels using a biocompatible resin, overcoming the drug-absorbing properties of PDMS. A customized chip holder allows for the simultaneous culture of six perfused chips, enabling high-throughput testing. The engineered skin-on-a-chip features distinct dermis and epidermis layers, confirmed via H&E staining and immunostaining. To evaluate drug screening capabilities, inflammation was induced using TNF-α and treated with dexamethasone, with cytokine levels compared to 2D cultures and human skin biopsies. Our 3D model exhibited drug response trends similar to human skin, while showing reduced cytotoxicity over time compared to biopsies. This perfused skin-on-a-chip provides a reliable, physiologically relevant alternative for drug and cosmetics screening, simplifying perfusion setup while preserving key benefits.
- 21 September 2024
- Published by Elsevier in Surfaces and Interfaces
- Vol. 54
Shear bond strength of resin to additively manufactured zirconia with different surface treatments
- 21 September 2024
- Published by Elsevier in Surfaces and Interfaces
- Vol. 54
Shear bond strength of resin to additively manufactured zirconia with different surface treatments
- 9 January 2024
- Published by Springer Nature in International Journal of Precision Engineering and Manufacturing-Green Technology
- Vol. 11 (4) , 1071-1079
Material-Efficient Multimaterial Projection Micro-stereolithography Using Droplet-Based Resin Supply
- 9 January 2024
- Published by Springer Nature in International Journal of Precision Engineering and Manufacturing-Green Technology
- Vol. 11 (4) , 1071-1079
Material-Efficient Multimaterial Projection Micro-stereolithography Using Droplet-Based Resin Supply
- Open Access
- 1 August 2022
- Published by AIP Publishing in APL Materials
- Vol. 10 (8) , 081105
Thermal transport in 3D printed shape memory polymer metamaterials
Shape memory polymers are gaining significant interest as one of the major constituent materials for the emerging field of 4D printing. While 3D-printed metamaterials with shape memory polymers show unique thermomechanical behaviors, their thermal transport properties have received relatively little attention. Here, we show that thermal transport in 3D-printed shape memory polymers strongly depends on the shape, solid volume fraction, and temperature and that thermal radiation plays a critical role. Our infrared thermography measurements reveal thermal transport mechanisms of shape memory polymers in varying shapes from bulk to octet-truss and Kelvin-foam microlattices with volume fractions of 4%–7% and over a temperature range of 30–130 °C. The thermal conductivity of bulk shape memory polymers increases from 0.24 to 0.31 W m−1 K−1 around the glass transition temperature, in which the primary mechanism is the phase-dependent change in thermal conduction. On the contrary, thermal radiation dominates heat transfer in microlattices and its contribution to the Kelvin-foam structure ranges from 68% to 83% and to the octet-truss structure ranges from 59% to 76% over the same temperature range. We attribute this significant role of thermal radiation to the unique combination of a high infrared emissivity and a high surface-to-volume ratio in the shape memory polymer microlattices. Our work also presents an effective medium approach to explain the experimental results and model thermal transport properties with varying shapes, volume fractions, and temperatures. These findings provide new insights into understanding thermal transport mechanisms in 4D-printed shape memory polymers and exploring the design space of thermomechanical metamaterials.
- 1 August 2022
- Published by AIP Publishing in APL Materials
- Vol. 10 (8) , 081105
Open AccessThermal transport in 3D printed shape memory polymer metamaterials
Shape memory polymers are gaining significant interest as one of the major constituent materials for the emerging field of 4D printing. While 3D-printed metamaterials with shape memory polymers show unique thermomechanical behaviors, their thermal transport properties have received relatively little attention. Here, we show that thermal transport in 3D-printed shape memory polymers strongly depends on the shape, solid volume fraction, and temperature and that thermal radiation plays a critical role. Our infrared thermography measurements reveal thermal transport mechanisms of shape memory polymers in varying shapes from bulk to octet-truss and Kelvin-foam microlattices with volume fractions of 4%–7% and over a temperature range of 30–130 °C. The thermal conductivity of bulk shape memory polymers increases from 0.24 to 0.31 W m−1 K−1 around the glass transition temperature, in which the primary mechanism is the phase-dependent change in thermal conduction. On the contrary, thermal radiation dominates heat transfer in microlattices and its contribution to the Kelvin-foam structure ranges from 68% to 83% and to the octet-truss structure ranges from 59% to 76% over the same temperature range. We attribute this significant role of thermal radiation to the unique combination of a high infrared emissivity and a high surface-to-volume ratio in the shape memory polymer microlattices. Our work also presents an effective medium approach to explain the experimental results and model thermal transport properties with varying shapes, volume fractions, and temperatures. These findings provide new insights into understanding thermal transport mechanisms in 4D-printed shape memory polymers and exploring the design space of thermomechanical metamaterials.
- 3 January 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (11) , 12735-12745
Multimaterial Printing for Cephalopod-Inspired Light-Responsive Artificial Chromatophores
Cephalopods use chromatophores distributed on their soft skin to change skin color and its pattern. Each chromatophore consists of a central sac containing pigment granules and radial muscles surrounding the sac. The contraction of the radial muscle causes the central sac to expand in area, making the color of the pigment more visible. With the chromatophores actuating individually, cephalopods can create extremely complex skin color patterns, which they utilize for exquisite functions including camouflage and communication. Inspired by this mechanism, we present an artificial chromatophore that can modulate its color pattern in response to light. Multimaterial projection microstereolithography is used to integrate three functional components including a photoactive hydrogel composite with polydopamine nanoparticles (PDA-NPs), acrylic acid hydrogel, and poly(ethylene glycol) diacrylate. In order to generate light-driven actuation of the artificial chromatophore, the photothermal effect of the PDA-NPs, light-responsive deformation of the photoactive hydrogel composite, and the produced mechanical stresses are studied. Mechanical properties and interfacial bonding strengths between different materials are also investigated to ensure structural integrity during actuation. We demonstrate pattern modulation of the light-responsive artificial chromatophores (LACs) with the projection of different light patterns. The LAC may suggest a new concept for various engineering applications such as the camouflage interface, biophotonic device, and flexible display.
- 3 January 2021
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (11) , 12735-12745
Multimaterial Printing for Cephalopod-Inspired Light-Responsive Artificial Chromatophores
Cephalopods use chromatophores distributed on their soft skin to change skin color and its pattern. Each chromatophore consists of a central sac containing pigment granules and radial muscles surrounding the sac. The contraction of the radial muscle causes the central sac to expand in area, making the color of the pigment more visible. With the chromatophores actuating individually, cephalopods can create extremely complex skin color patterns, which they utilize for exquisite functions including camouflage and communication. Inspired by this mechanism, we present an artificial chromatophore that can modulate its color pattern in response to light. Multimaterial projection microstereolithography is used to integrate three functional components including a photoactive hydrogel composite with polydopamine nanoparticles (PDA-NPs), acrylic acid hydrogel, and poly(ethylene glycol) diacrylate. In order to generate light-driven actuation of the artificial chromatophore, the photothermal effect of the PDA-NPs, light-responsive deformation of the photoactive hydrogel composite, and the produced mechanical stresses are studied. Mechanical properties and interfacial bonding strengths between different materials are also investigated to ensure structural integrity during actuation. We demonstrate pattern modulation of the light-responsive artificial chromatophores (LACs) with the projection of different light patterns. The LAC may suggest a new concept for various engineering applications such as the camouflage interface, biophotonic device, and flexible display.
- 31 August 2020
- Published by Wiley in Advanced Materials
- Vol. 32 (40) , e2004285
4D‐Printed Transformable Tube Array for High‐Throughput 3D Cell Culture and Histology
3D cell cultures are rapidly emerging as a promising tool to model various human physiologies and pathologies by closely recapitulating key characteristics and functions of in vivo microenvironment. While high‐throughput 3D culture is readily available using multi‐well plates, assessing the internal microstructure of 3D cell cultures still remains extremely slow because of the manual, laborious, and time‐consuming histological procedures. Here, a 4D‐printed transformable tube array (TTA) using a shape‐memory polymer that enables massively parallel histological analysis of 3D cultures is presented. The interconnected TTA can be programmed to be expanded by 3.6 times of its printed dimension to match the size of a multi‐well plate, with the ability to restore its original dimension for transferring all cultures to a histology cassette in order. Being compatible with microtome sectioning, the TTA allows for parallel histology processing for the entire samples cultured in a multi‐well plate. The test result with human neural progenitor cell spheroids suggests a remarkable reduction in histology processing time by an order of magnitude. High‐throughput analysis of 3D cultures enabled by this TTA has great potential to further accelerate innovations in various 3D culture applications such as high‐throughput/content screening, drug discovery, disease modeling, and personalized medicine.
- 31 August 2020
- Published by Wiley in Advanced Materials
- Vol. 32 (40) , e2004285
4D‐Printed Transformable Tube Array for High‐Throughput 3D Cell Culture and Histology
3D cell cultures are rapidly emerging as a promising tool to model various human physiologies and pathologies by closely recapitulating key characteristics and functions of in vivo microenvironment. While high‐throughput 3D culture is readily available using multi‐well plates, assessing the internal microstructure of 3D cell cultures still remains extremely slow because of the manual, laborious, and time‐consuming histological procedures. Here, a 4D‐printed transformable tube array (TTA) using a shape‐memory polymer that enables massively parallel histological analysis of 3D cultures is presented. The interconnected TTA can be programmed to be expanded by 3.6 times of its printed dimension to match the size of a multi‐well plate, with the ability to restore its original dimension for transferring all cultures to a histology cassette in order. Being compatible with microtome sectioning, the TTA allows for parallel histology processing for the entire samples cultured in a multi‐well plate. The test result with human neural progenitor cell spheroids suggests a remarkable reduction in histology processing time by an order of magnitude. High‐throughput analysis of 3D cultures enabled by this TTA has great potential to further accelerate innovations in various 3D culture applications such as high‐throughput/content screening, drug discovery, disease modeling, and personalized medicine.
- Top Cited Papers
- 4 February 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 30 (11)
4D Printing of a Bioinspired Microneedle Array with Backward‐Facing Barbs for Enhanced Tissue Adhesion
Microneedle (MN), a miniaturized needle with a length‐scale of hundreds of micrometers, has received a great deal of attention because of its minimally invasive, pain‐free, and easy‐to‐use nature. However, a major challenge for controlled long‐term drug delivery or biosensing using MN is its low tissue adhesion. Although microscopic structures with high tissue adhesion are found from living creatures in nature (e.g., microhooks of parasites, barbed stingers of honeybees, quills of porcupines), creating MNs with such complex microscopic features is still challenging with traditional fabrication methods. Here, a MN with bioinspired backward‐facing curved barbs for enhanced tissue adhesion, manufactured by a digital light processing 3D printing technique, is presented. Backward‐facing barbs on a MN are created by desolvation‐induced deformation utilizing cross‐linking density gradient in a photocurable polymer. Barb thickness and bending curvature are controlled by printing parameters and material composition. It is demonstrated that tissue adhesion of a backward‐facing barbed MN is 18 times stronger than that of barbless MN. Also demonstrated is sustained drug release with barbed MNs in tissue. Improved tissue adhesion of the bioinspired MN allows for more stable and robust performance for drug delivery, biofluid collection, and biosensing.
- 4 February 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 30 (11)
Top Cited Papers4D Printing of a Bioinspired Microneedle Array with Backward‐Facing Barbs for Enhanced Tissue Adhesion
Microneedle (MN), a miniaturized needle with a length‐scale of hundreds of micrometers, has received a great deal of attention because of its minimally invasive, pain‐free, and easy‐to‐use nature. However, a major challenge for controlled long‐term drug delivery or biosensing using MN is its low tissue adhesion. Although microscopic structures with high tissue adhesion are found from living creatures in nature (e.g., microhooks of parasites, barbed stingers of honeybees, quills of porcupines), creating MNs with such complex microscopic features is still challenging with traditional fabrication methods. Here, a MN with bioinspired backward‐facing curved barbs for enhanced tissue adhesion, manufactured by a digital light processing 3D printing technique, is presented. Backward‐facing barbs on a MN are created by desolvation‐induced deformation utilizing cross‐linking density gradient in a photocurable polymer. Barb thickness and bending curvature are controlled by printing parameters and material composition. It is demonstrated that tissue adhesion of a backward‐facing barbed MN is 18 times stronger than that of barbless MN. Also demonstrated is sustained drug release with barbed MNs in tissue. Improved tissue adhesion of the bioinspired MN allows for more stable and robust performance for drug delivery, biofluid collection, and biosensing.
- Top Cited Papers
- 19 March 2019
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 6 (6) , 1244-1250
4D printing reconfigurable, deployable and mechanically tunable metamaterials
Digital 3D printing with a shape memory polymer is utilized to create mechanical metamaterials exhibiting dramatic and reversible changes in stiffness, geometry, and functions.
- 19 March 2019
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 6 (6) , 1244-1250
Top Cited Papers4D printing reconfigurable, deployable and mechanically tunable metamaterials
Digital 3D printing with a shape memory polymer is utilized to create mechanical metamaterials exhibiting dramatic and reversible changes in stiffness, geometry, and functions.