Chenjie Yu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Chenjie Yu has a total of 272 co-authors. Here are the top co-authors by number of shared publications:
- Paola Formenti
Université Paris Cité and Univ Paris Est Creteil, CNRS, LISA, F-75013 Paris, France
54 shared publications Mathieu Cazaunau
Univ Paris Est Creteil and Université Paris Cité, CNRS, LISA, 94010 Créteil, France
50 shared publications- Dantong Liu
Department of Atmospheric Sciences, School of Earth Sciences, Zhejiang University, Hangzhou 310058, China
47 shared publications - Claudia Di Biagio
Université Paris Cité and Univ Paris Est Creteil, CNRS, LISA, F-75013 Paris, France
43 shared publications Antonin Bergé
Université Paris Cité and Univ Paris Est Creteil, CNRS, LISA, 75013 Paris, France
40 shared publicationsEdouard Pangui
Univ Paris Est Creteil and Université Paris Cité, CNRS, LISA, 94010 Créteil, France
39 shared publications
Latest Publications
- Open Access
- 11 November 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (21) , 15831-15852
The synergy of morphology and mixing state on the absorption of coated black carbon soot
Black carbon (BC) strongly absorbs light and contributes to climate warming. Coating formation on fractal BC-containing soot is a ubiquitous atmospheric process that enhances its absorption, but the extent of this absorption enhancement ( E abs ) remains uncertain and difficult to represent in models. In this study, we use large simulation chamber experiments to investigate BC absorption and its modification by coating formation and ageing. Polydisperse fractal BC-containing soot was mixed with non-absorbing atmospherically-relevant secondary aerosols (sulfuric acid and α -pinene secondary organic aerosols). Varying reaction dynamics produced different coating rates and masses, mimicking atmospheric processing. The evolution of soot and coating properties was tracked for up to 20 h. The results of this study suggest a general positive correlation between E abs and coating amount on soot. However, they also experimentally demonstrate the strong effect of morphological modifications and mixing state heterogeneity on BC absorption, both depending on the reaction dynamics of coating formation and ageing of the coated soot. Combined variations in morphology and mixing state affect the magnitude of E abs and its further evolution, leading, depending on processing, to either an increase or decrease in absorption. The range of measured E abs resulting from soot processing cannot be reliably represented using a fixed E abs value or by a core-shell optical model, two approximations commonly used in climate models. These results support the need for new formalisms that would take into account both morphological and mixing state heterogeneity to improve model predictions of BC absorption and its role on the radiative budget.
- 11 November 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (21) , 15831-15852
Open AccessThe synergy of morphology and mixing state on the absorption of coated black carbon soot
Black carbon (BC) strongly absorbs light and contributes to climate warming. Coating formation on fractal BC-containing soot is a ubiquitous atmospheric process that enhances its absorption, but the extent of this absorption enhancement ( E abs ) remains uncertain and difficult to represent in models. In this study, we use large simulation chamber experiments to investigate BC absorption and its modification by coating formation and ageing. Polydisperse fractal BC-containing soot was mixed with non-absorbing atmospherically-relevant secondary aerosols (sulfuric acid and α -pinene secondary organic aerosols). Varying reaction dynamics produced different coating rates and masses, mimicking atmospheric processing. The evolution of soot and coating properties was tracked for up to 20 h. The results of this study suggest a general positive correlation between E abs and coating amount on soot. However, they also experimentally demonstrate the strong effect of morphological modifications and mixing state heterogeneity on BC absorption, both depending on the reaction dynamics of coating formation and ageing of the coated soot. Combined variations in morphology and mixing state affect the magnitude of E abs and its further evolution, leading, depending on processing, to either an increase or decrease in absorption. The range of measured E abs resulting from soot processing cannot be reliably represented using a fixed E abs value or by a core-shell optical model, two approximations commonly used in climate models. These results support the need for new formalisms that would take into account both morphological and mixing state heterogeneity to improve model predictions of BC absorption and its role on the radiative budget.
- Open Access
- 27 October 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (20) , 15055-15079
Urban-to-downwind variations in aerosol composition and optical properties in the Paris urban plume from coordinated airborne and ground-based observations
Aerosols play a critical role in Earth's climate, yet changes in their physicochemical properties during atmospheric transport remain an important source of uncertainty in predicting their climate impacts. Observational constraints on these changes over the first few hours of urban plume transport remain limited. Here, we investigated urban-to-downwind variations in aerosol physicochemical and optical properties using coordinated ground-based and airborne measurements in Paris and its downwind region, covering estimated plume transport times of ∼ 2–6 h. Urban plumes contributed modestly to downwind particle number concentrations in the 80–200 nm range and moderately enhanced submicron particulate matter (PM 1 ) relative to the surrounding background. Organic aerosol (Org) dominated PM 1 mass at both the urban site and downwind. Non-refractory PM 1 component mass fractions and secondary aerosol mass relative to CO showed limited urban-to-downwind variations, whereas the relative contribution of more oxidized Org increased downwind. In contrast, optical properties exhibited pronounced differences, with higher plume-average single-scattering albedo at both 450 and 630 nm downwind. The complex refractive index shifted from lower real (∼ 1.35–1.40) and higher imaginary (∼ 0.03–0.08) components near the urban source to higher real (∼ 1.45–1.50) and lower imaginary (∼ 0.015–0.02) components downwind. The average absorption Ångström exponent was also higher downwind, indicating stronger wavelength dependence of aerosol absorption. These observations reveal systematic urban-to-downwind differences in aerosol physicochemical and optical properties consistent with atmospheric processing during transport. They highlight the importance of accounting for spatially evolving aerosol properties in atmospheric models and remote-sensing retrievals.
- 27 October 2026
- Published by Copernicus GmbH in Atmospheric Chemistry and Physics
- Vol. 26 (20) , 15055-15079
Open AccessUrban-to-downwind variations in aerosol composition and optical properties in the Paris urban plume from coordinated airborne and ground-based observations
Aerosols play a critical role in Earth's climate, yet changes in their physicochemical properties during atmospheric transport remain an important source of uncertainty in predicting their climate impacts. Observational constraints on these changes over the first few hours of urban plume transport remain limited. Here, we investigated urban-to-downwind variations in aerosol physicochemical and optical properties using coordinated ground-based and airborne measurements in Paris and its downwind region, covering estimated plume transport times of ∼ 2–6 h. Urban plumes contributed modestly to downwind particle number concentrations in the 80–200 nm range and moderately enhanced submicron particulate matter (PM 1 ) relative to the surrounding background. Organic aerosol (Org) dominated PM 1 mass at both the urban site and downwind. Non-refractory PM 1 component mass fractions and secondary aerosol mass relative to CO showed limited urban-to-downwind variations, whereas the relative contribution of more oxidized Org increased downwind. In contrast, optical properties exhibited pronounced differences, with higher plume-average single-scattering albedo at both 450 and 630 nm downwind. The complex refractive index shifted from lower real (∼ 1.35–1.40) and higher imaginary (∼ 0.03–0.08) components near the urban source to higher real (∼ 1.45–1.50) and lower imaginary (∼ 0.015–0.02) components downwind. The average absorption Ångström exponent was also higher downwind, indicating stronger wavelength dependence of aerosol absorption. These observations reveal systematic urban-to-downwind differences in aerosol physicochemical and optical properties consistent with atmospheric processing during transport. They highlight the importance of accounting for spatially evolving aerosol properties in atmospheric models and remote-sensing retrievals.
- Open Access
- 22 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-34
Reply on RC1
Aerosols play a critical role in Earth’s climate, but substantial evolution in their physicochemical properties after emission introduces uncertainties in predicting their climate impacts. Observational constraints on how aging modifies aerosol properties remain limited. Here, we investigate the effects of ~2–6 h of aging on aerosol physicochemical properties using coordinated airborne and ground-based measurements in Paris and its downwind regions. Urban plumes contributed modestly to particle number concentrations in the 80–200 nm size range and resulted in a moderate enhancement of submicron particle (PM1) mass relative to out-plume background levels. Organic aerosol (Org) dominated PM1 mass both near the urban source and downwind. Aircraft observations showed enhanced Org and non-refractory PM1 relative to excess CO (CO above surrounding background) in downwind plumes, indicating net secondary organic aerosol production during aging. Aerosol optical properties evolved concurrently. Downwind plume-average single-scattering albedo (SSA) at 450 and 630 nm was higher than near-source values. Consistently, the complex refractive index shifted from lower real (~1.35–1.40) and higher imaginary (~0.03–0.08) components near source to higher real (~1.45–1.50) and lower imaginary (~0.015–0.02) components downwind. The absorption Ångström exponent also increased, indicating a greater fractional contribution of brown carbon to light absorption. These results demonstrate that urban plume aging alters aerosol composition and optical properties and highlight the need to represent evolving aerosol characteristics in atmospheric models and remote-sensing retrievals.
- 22 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-34
Open AccessReply on RC1
Aerosols play a critical role in Earth’s climate, but substantial evolution in their physicochemical properties after emission introduces uncertainties in predicting their climate impacts. Observational constraints on how aging modifies aerosol properties remain limited. Here, we investigate the effects of ~2–6 h of aging on aerosol physicochemical properties using coordinated airborne and ground-based measurements in Paris and its downwind regions. Urban plumes contributed modestly to particle number concentrations in the 80–200 nm size range and resulted in a moderate enhancement of submicron particle (PM1) mass relative to out-plume background levels. Organic aerosol (Org) dominated PM1 mass both near the urban source and downwind. Aircraft observations showed enhanced Org and non-refractory PM1 relative to excess CO (CO above surrounding background) in downwind plumes, indicating net secondary organic aerosol production during aging. Aerosol optical properties evolved concurrently. Downwind plume-average single-scattering albedo (SSA) at 450 and 630 nm was higher than near-source values. Consistently, the complex refractive index shifted from lower real (~1.35–1.40) and higher imaginary (~0.03–0.08) components near source to higher real (~1.45–1.50) and lower imaginary (~0.015–0.02) components downwind. The absorption Ångström exponent also increased, indicating a greater fractional contribution of brown carbon to light absorption. These results demonstrate that urban plume aging alters aerosol composition and optical properties and highlight the need to represent evolving aerosol characteristics in atmospheric models and remote-sensing retrievals.
- Open Access
- 16 September 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-29
Complex refractive indices of flame soot from different combustion conditions retrieved using Mie and RDG-FA theories: a simulation chamber study
Soot aerosol generated from incomplete combustion of biomasses, fossil fuels and biofuels is a major light-absorber, however its spectral complex refractive index (m=n-ik) remains uncertain. In this study, fractal soot aerosols with varying maturity and physico-chemical properties were studied systematically in a large simulation chamber to determine their complex refractive index. The real (n) and imaginary (k) parts of m were retrieved through optical calculations using the measured size, morphology, density and particles’ scattering, absorption and extinction coefficients as input parameters. Optical calculations were performed using Mie theory, which represents soot as homogeneous spheres, and the Rayleigh–Debye–Gans for fractal aggregate (RDG-FA) theory, which accounts for soot aggregate morphology. Monte Carlo simulations were used to quantify how uncertainties in input parameters affect the retrievals. Results from the analysis show that both Mie and RDG-FA theories can reproduce the measured absorption and scattering of soot, but that the retrieved n and k values differ substantially between the two approaches, underscoring the need for theory-consistent use of refractive index values in optical modelling. For soot with elemental-to-total carbon ratios of 0.79 (BC-dominated) to 0 (BrC-dominated), retrieved values span 1.35–2.68 (n) and 0.38–0.31 (k) using Mie theory, and 1.68–2.07 (n) and 0.20–0.09 (k) using RDG-FA. Mie-based refractive indices are weakly sensitive to uncertainties in input parameters but strongly affected by particle coagulation and size growth, reflecting limitations of the spherical approximation. The RDG-FA complex refractive index retrievals remain stable during coagulation but depend strongly on the uncertainty of the assumed particle morphology.
- 16 September 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-29
Open AccessComplex refractive indices of flame soot from different combustion conditions retrieved using Mie and RDG-FA theories: a simulation chamber study
Soot aerosol generated from incomplete combustion of biomasses, fossil fuels and biofuels is a major light-absorber, however its spectral complex refractive index (m=n-ik) remains uncertain. In this study, fractal soot aerosols with varying maturity and physico-chemical properties were studied systematically in a large simulation chamber to determine their complex refractive index. The real (n) and imaginary (k) parts of m were retrieved through optical calculations using the measured size, morphology, density and particles’ scattering, absorption and extinction coefficients as input parameters. Optical calculations were performed using Mie theory, which represents soot as homogeneous spheres, and the Rayleigh–Debye–Gans for fractal aggregate (RDG-FA) theory, which accounts for soot aggregate morphology. Monte Carlo simulations were used to quantify how uncertainties in input parameters affect the retrievals. Results from the analysis show that both Mie and RDG-FA theories can reproduce the measured absorption and scattering of soot, but that the retrieved n and k values differ substantially between the two approaches, underscoring the need for theory-consistent use of refractive index values in optical modelling. For soot with elemental-to-total carbon ratios of 0.79 (BC-dominated) to 0 (BrC-dominated), retrieved values span 1.35–2.68 (n) and 0.38–0.31 (k) using Mie theory, and 1.68–2.07 (n) and 0.20–0.09 (k) using RDG-FA. Mie-based refractive indices are weakly sensitive to uncertainties in input parameters but strongly affected by particle coagulation and size growth, reflecting limitations of the spherical approximation. The RDG-FA complex refractive index retrievals remain stable during coagulation but depend strongly on the uncertainty of the assumed particle morphology.
- Open Access
- 31 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Comment on egusphere-2026-4423
Brown carbon (BrC) absorbs solar radiation, thereby partially offsetting the cooling effect of aerosols on the climate. However, its contribution to climate forcing remains poorly constrained and is currently not explicitly included in the overall radiative forcing estimates of the IPCC. In this work, we quantify the contributions of BrC to light absorption in urban outflows from Paris using aircraft observations. We observe a progressive "browning" of the plume over 6 hours of transport time, characterised by a significant increase in the relative contribution of BrC to aerosol light absorption. This optical shift is strongly correlated with photochemical ageing as evidenced by the increase in the organic aerosols-to-BC mass ratio and the simultaneous depletion of aromatic volatile organic precursors. The corresponding rise in the Absorption Angström Exponent from 1.1 to 2.6 provides further evidence that secondary organic aerosol formation is the primary driver of enhanced light absorption at 450 nm in the aged plume. Our observations indicate that BrC is photochemically produced during transport at a rate of ~0.25 h-1 over 6 hours of atmospheric processing under the conditions examined in this study. For these cases, the findings suggest that urban outflows are not merely diluted during transport but undergo significant chemical transformations that alter their radiative impact. Accounting for these time-dependent optical changes provides a way to refine how climate models simulate radiative impacts of large metropolitan areas to climate change.
- 31 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Open AccessComment on egusphere-2026-4423
Brown carbon (BrC) absorbs solar radiation, thereby partially offsetting the cooling effect of aerosols on the climate. However, its contribution to climate forcing remains poorly constrained and is currently not explicitly included in the overall radiative forcing estimates of the IPCC. In this work, we quantify the contributions of BrC to light absorption in urban outflows from Paris using aircraft observations. We observe a progressive "browning" of the plume over 6 hours of transport time, characterised by a significant increase in the relative contribution of BrC to aerosol light absorption. This optical shift is strongly correlated with photochemical ageing as evidenced by the increase in the organic aerosols-to-BC mass ratio and the simultaneous depletion of aromatic volatile organic precursors. The corresponding rise in the Absorption Angström Exponent from 1.1 to 2.6 provides further evidence that secondary organic aerosol formation is the primary driver of enhanced light absorption at 450 nm in the aged plume. Our observations indicate that BrC is photochemically produced during transport at a rate of ~0.25 h-1 over 6 hours of atmospheric processing under the conditions examined in this study. For these cases, the findings suggest that urban outflows are not merely diluted during transport but undergo significant chemical transformations that alter their radiative impact. Accounting for these time-dependent optical changes provides a way to refine how climate models simulate radiative impacts of large metropolitan areas to climate change.
- Open Access
- 27 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Comment on egusphere-2026-4423
Brown carbon (BrC) absorbs solar radiation, thereby partially offsetting the cooling effect of aerosols on the climate. However, its contribution to climate forcing remains poorly constrained and is currently not explicitly included in the overall radiative forcing estimates of the IPCC. In this work, we quantify the contributions of BrC to light absorption in urban outflows from Paris using aircraft observations. We observe a progressive "browning" of the plume over 6 hours of transport time, characterised by a significant increase in the relative contribution of BrC to aerosol light absorption. This optical shift is strongly correlated with photochemical ageing as evidenced by the increase in the organic aerosols-to-BC mass ratio and the simultaneous depletion of aromatic volatile organic precursors. The corresponding rise in the Absorption Angström Exponent from 1.1 to 2.6 provides further evidence that secondary organic aerosol formation is the primary driver of enhanced light absorption at 450 nm in the aged plume. Our observations indicate that BrC is photochemically produced during transport at a rate of ~0.25 h-1 over 6 hours of atmospheric processing under the conditions examined in this study. For these cases, the findings suggest that urban outflows are not merely diluted during transport but undergo significant chemical transformations that alter their radiative impact. Accounting for these time-dependent optical changes provides a way to refine how climate models simulate radiative impacts of large metropolitan areas to climate change.
- 27 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Open AccessComment on egusphere-2026-4423
Brown carbon (BrC) absorbs solar radiation, thereby partially offsetting the cooling effect of aerosols on the climate. However, its contribution to climate forcing remains poorly constrained and is currently not explicitly included in the overall radiative forcing estimates of the IPCC. In this work, we quantify the contributions of BrC to light absorption in urban outflows from Paris using aircraft observations. We observe a progressive "browning" of the plume over 6 hours of transport time, characterised by a significant increase in the relative contribution of BrC to aerosol light absorption. This optical shift is strongly correlated with photochemical ageing as evidenced by the increase in the organic aerosols-to-BC mass ratio and the simultaneous depletion of aromatic volatile organic precursors. The corresponding rise in the Absorption Angström Exponent from 1.1 to 2.6 provides further evidence that secondary organic aerosol formation is the primary driver of enhanced light absorption at 450 nm in the aged plume. Our observations indicate that BrC is photochemically produced during transport at a rate of ~0.25 h-1 over 6 hours of atmospheric processing under the conditions examined in this study. For these cases, the findings suggest that urban outflows are not merely diluted during transport but undergo significant chemical transformations that alter their radiative impact. Accounting for these time-dependent optical changes provides a way to refine how climate models simulate radiative impacts of large metropolitan areas to climate change.
- Open Access
- 27 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Comment on egusphere-2026-4423
Brown carbon (BrC) absorbs solar radiation, thereby partially offsetting the cooling effect of aerosols on the climate. However, its contribution to climate forcing remains poorly constrained and is currently not explicitly included in the overall radiative forcing estimates of the IPCC. In this work, we quantify the contributions of BrC to light absorption in urban outflows from Paris using aircraft observations. We observe a progressive "browning" of the plume over 6 hours of transport time, characterised by a significant increase in the relative contribution of BrC to aerosol light absorption. This optical shift is strongly correlated with photochemical ageing as evidenced by the increase in the organic aerosols-to-BC mass ratio and the simultaneous depletion of aromatic volatile organic precursors. The corresponding rise in the Absorption Angström Exponent from 1.1 to 2.6 provides further evidence that secondary organic aerosol formation is the primary driver of enhanced light absorption at 450 nm in the aged plume. Our observations indicate that BrC is photochemically produced during transport at a rate of ~0.25 h-1 over 6 hours of atmospheric processing under the conditions examined in this study. For these cases, the findings suggest that urban outflows are not merely diluted during transport but undergo significant chemical transformations that alter their radiative impact. Accounting for these time-dependent optical changes provides a way to refine how climate models simulate radiative impacts of large metropolitan areas to climate change.
- 27 August 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-28
Open AccessComment on egusphere-2026-4423
Brown carbon (BrC) absorbs solar radiation, thereby partially offsetting the cooling effect of aerosols on the climate. However, its contribution to climate forcing remains poorly constrained and is currently not explicitly included in the overall radiative forcing estimates of the IPCC. In this work, we quantify the contributions of BrC to light absorption in urban outflows from Paris using aircraft observations. We observe a progressive "browning" of the plume over 6 hours of transport time, characterised by a significant increase in the relative contribution of BrC to aerosol light absorption. This optical shift is strongly correlated with photochemical ageing as evidenced by the increase in the organic aerosols-to-BC mass ratio and the simultaneous depletion of aromatic volatile organic precursors. The corresponding rise in the Absorption Angström Exponent from 1.1 to 2.6 provides further evidence that secondary organic aerosol formation is the primary driver of enhanced light absorption at 450 nm in the aged plume. Our observations indicate that BrC is photochemically produced during transport at a rate of ~0.25 h-1 over 6 hours of atmospheric processing under the conditions examined in this study. For these cases, the findings suggest that urban outflows are not merely diluted during transport but undergo significant chemical transformations that alter their radiative impact. Accounting for these time-dependent optical changes provides a way to refine how climate models simulate radiative impacts of large metropolitan areas to climate change.
- Open Access
- 28 July 2026
- Published by Copernicus GmbH in EGUsphere
- p. 1-28
Photochemical ageing drives the browning of urban outflows through secondary brown carbon production
Brown carbon (BrC) absorbs solar radiation, thereby partially offsetting the cooling effect of aerosols on the climate. However, its contribution to climate forcing remains poorly constrained and is currently not explicitly included in the overall radiative forcing estimates of the IPCC. In this work, we quantify the contributions of BrC to light absorption in urban outflows from Paris using aircraft observations. We observe a progressive "browning" of the plume over 6 hours of transport time, characterised by a significant increase in the relative contribution of BrC to aerosol light absorption. This optical shift is strongly correlated with photochemical ageing as evidenced by the increase in the organic aerosols-to-BC mass ratio and the simultaneous depletion of aromatic volatile organic precursors. The corresponding rise in the Absorption Angström Exponent from 1.1 to 2.6 provides further evidence that secondary organic aerosol formation is the primary driver of enhanced light absorption at 450 nm in the aged plume. Our observations indicate that BrC is photochemically produced during transport at a rate of ~0.25 h-1 over 6 hours of atmospheric processing under the conditions examined in this study. For these cases, the findings suggest that urban outflows are not merely diluted during transport but undergo significant chemical transformations that alter their radiative impact. Accounting for these time-dependent optical changes provides a way to refine how climate models simulate radiative impacts of large metropolitan areas to climate change.
- 28 July 2026
- Published by Copernicus GmbH in EGUsphere
- p. 1-28
Open AccessPhotochemical ageing drives the browning of urban outflows through secondary brown carbon production
Brown carbon (BrC) absorbs solar radiation, thereby partially offsetting the cooling effect of aerosols on the climate. However, its contribution to climate forcing remains poorly constrained and is currently not explicitly included in the overall radiative forcing estimates of the IPCC. In this work, we quantify the contributions of BrC to light absorption in urban outflows from Paris using aircraft observations. We observe a progressive "browning" of the plume over 6 hours of transport time, characterised by a significant increase in the relative contribution of BrC to aerosol light absorption. This optical shift is strongly correlated with photochemical ageing as evidenced by the increase in the organic aerosols-to-BC mass ratio and the simultaneous depletion of aromatic volatile organic precursors. The corresponding rise in the Absorption Angström Exponent from 1.1 to 2.6 provides further evidence that secondary organic aerosol formation is the primary driver of enhanced light absorption at 450 nm in the aged plume. Our observations indicate that BrC is photochemically produced during transport at a rate of ~0.25 h-1 over 6 hours of atmospheric processing under the conditions examined in this study. For these cases, the findings suggest that urban outflows are not merely diluted during transport but undergo significant chemical transformations that alter their radiative impact. Accounting for these time-dependent optical changes provides a way to refine how climate models simulate radiative impacts of large metropolitan areas to climate change.
- Open Access
- 28 July 2026
- Published by Copernicus GmbH
Supplementary material to "Photochemical ageing drives the browning of urban outflows through secondary brown carbon production"
- 28 July 2026
- Published by Copernicus GmbH
Open AccessSupplementary material to "Photochemical ageing drives the browning of urban outflows through secondary brown carbon production"